LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2008 >> Lancer ES, Standard >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Supplemental Restraint System (SRS) -- Lancer >> Air Bag Module(S) And Clock Spring >> Removal And Installation >> Side-Airbag Module >> <<D>> Air Bag Module Assembly Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

<<D>> Air Bag Module Assembly Removal

WARNING:
  • The air bag module must not be measured with such equipment as an ohmmeter.
  • The air bag module must not be disassembled.
  • The removed air bag module should be stored in a clean, dry place with the deployment surface facing up.

Using t-type long torx wrench (T30), a torx screw is loosened completely and removed.

Fig 1: Identifying Long Torx Wrench Length
G05384175Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals