>>A<< Synchronizer Hub No.2 And Synchronizer Sleeve No.2 Installation

1. Before assembly, make sure that the hub and sleeve face the correct direction.
   NOTE:

   • Apply gear oil to the caulked area between the sleeve and the hub.
   • After installation, confirm the sleeve and the hub slide smoothly.
   Fig 1: Identifying Installation Direction Of Synchronizer Sleeve
   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
2. Using special tools MD998812, MD998813 and MD998820, install the synchronizer sleeve No.2 and synchronizer hub No.2.

Fig 2: Installing Synchronizer Sleeve And Synchronizer Hub No 2

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.