<<A>>Piston Boot/Piston Removal

WARNING: This page is about a different car, the 2009 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Blow air little by little to remove the pistons. The pistons will rush out if a force of air is applied suddenly.
If one piston has been removed completely, it will become impossible to remove the second piston.

Remove the pistons and the piston boots by pumping in air from the brake hose connection. Be sure to use the handle of a plastic hammer and adjust the height of the two pistons so that the pistons protrude evenly.