Service Specifications
WARNING: This page is about a different car, the 2009 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE SPECIFICATIONS
| Item | Standard value | Limit | ||
|---|---|---|---|---|
| Brake pedal height mm (in) | 219.8 - 227.8 (8.7 - 9.0) | - | ||
| Dimension from the brake booster stud bolt end to the clevis hole center mm (in) | 75.8 - 80.2 (2.98 - 3.16) | - | ||
| Brake pedal free play mm (in) | 3 - 8 (0.12 - 0.31) | - | ||
| Proportioning valve output fluid pressure MPa (psi) <Vehicles without ABS> | Vehicles with rear drum brake | Split point | 2.21 - 2.70 (320 - 391) | - |
| When input fluid pressure is 6.86 MPa (996 psi). | 3.29 - 3.82 (477 - 554) | - | ||
| Vehicles with rear disc brake | Split point | 1.81 - 2.21 (262 - 320) | - | |
| When input fluid pressure is 6.86 MPa (996 psi). | 2.33 - 3.46 (338 - 501) | - | ||
| Proportioning valve output fluid pressure difference between left and right MPa (psi) | - | 0.5 (73) | ||
| Pedal-to-floor clearance when brake pedal is depressed mm (in) [Pedal depression force: approx. 500 N] | 85 (3.35) or more | - | ||
| Brake pedal distortion mm | Distance from the pedal pad surface to the level surface | M/T | 237 - 245 (9.3 - 9.6) | - |
| CVT, TC-SST | 240 - 248 (9.4 - 9.8) | - | ||
| Fluid pressure generated by brake booster non-servo effect test kPa (psi) | Vehicles without ABS | Pedal depression force: 100 N | 0 - 600 (0 - 87) | - |
| Pedal depression force: 300 N | 1,380 - 2,220 (200 - 322) | - | ||
| Vehicles with ABS (Except RALLIART) | Pedal depression force: 100 N | 0 - 590 (0 - 85) | - | |
| Pedal depression force: 300 N | 1,360 - 2,180 (197 - 316) | - | ||
| Vehicles with ABS (RALLIART) | Pedal depression force: 100 N | 0 - 510 (0 - 74) | - | |
| Pedal depression force: 300 N | 1,170 - 1,880 (170 - 273) | - | ||
| Fluid pressure generated by brake booster servo effect test kPa (psi) | Vehicles without ABS | Pedal depression force: 100 N | 4,670 - 5,910 (677 - 857) | - |
| Pedal depression force: 300 N | 10,720 - 11,560 (1,555 - 1,676) | - | ||
| Vehicles with ABS (Except RALLIART) | Pedal depression force: 100 N | 4,850 - 6,460 (703 - 937) | - | |
| Pedal depression force: 300 N | 10,550 - 11,380 (1,530 - 1,650) | - | ||
| Vehicles with ABS (RALLIART) | Pedal depression force: 100 N | 4,180 - 5,470 (606 - 794) | - | |
| Pedal depression force: 300 N | 9,110 - 9,820 (1,322 - 1,425) | - | ||
| Front disc brake | Brake pad thickness mm (in) | 10.0 (0.39) | 2.0 (0.08) | |
| Brake disc thickness mm (in) | Except RALLIART | 26.0 (1.02) | 24.4 (0.96) | |
| RALLIART | 24.0 (0.94) | 22.4 (0.88) | ||
| Brake disc runout mm (in) | - | 0.06 (0.0024) | ||
| Brake drag force N (lb) | Except RALLIART | 68 (15.3) or less | - | |
| RALLIART | 85 (19.1) or less | - | ||
| Rear disc brake | Brake pad thickness mm (in) | 10.0 (0.39) | 2.0 (0.08) | |
| Brake disc thickness mm (in) | 10.0 (0.39) | 8.4 (0.33) | ||
| Brake disc runout mm (in) | - | 0.08 (0.0032) | ||
| Brake drag force N (lb) | 68 (15.3) or less | - | ||
| Rear drum brake | Brake lining thickness mm (in) | 4.0 (0.16) | 1.0 (0.04) | |
| Brake drum inside diameter mm (in) | 203 (8.0) | 205 (8.1) | ||