Rectifier Assembly
WARNING: This page is about a different variant/trim than selected.
Use the analog type tester to make sure the electrical continuity of each diode meets the table.
Unless the electrical continuity of each diode meets the CONTINUITY CHART , replace the rectifier.
CONTINUITY CHART
| (-) side | (+) side | Electrical continuity |
|---|---|---|
| E | P1, P2, P3, P4, P5, P6 | Yes |
| B | No | |
| P1, P2, P3, P4, P5, P6 | E | No |
| B | Yes |