LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2008 >> Lancer ES, Standard >> Repair and Diagnosis >> Maintenance >> Procedures >> General -- Lancer >> Vehicle Identification >> Vehicle Identification Code Plate >> Chassis Number >> Theft Protection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Theft Protection

In order to protect against theft, a Vehicle Identification Number (VIN) is attached as a plate or label to the following major parts of the engine and transaxle, as well as main outer panels: Engine cylinder block, Transaxle housing, Hood, Bumpers, Front end crossmember, Front fender, Doors

In addition, a theft-protection label is attached to replacement parts for the body outer panel main components, and the same data is stamped into replacement parts for the engine and the transaxle.

Fig 1: Identifying Theft-Protection Label
G05373973Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
CAUTION: Cautions regarding panel repairs:
  • When repainting original parts, do so after first masking the theft-protection label. After painting, be sure to peel off the masking tape.
  • The theft-protection label for replacement parts is covered by masking tape, so such parts can be painted as is. The masking tape should be removed after painting is finished.
  • The theft-protection label should not be removed from original parts or replacement parts.