Connecting Rod, Engine

Connecting Rod
Clearance of connecting rod big end thrust
Standard value 0.10 - 0.25 mm (0.004 - 0.010 in)
Limit 0.4 mm (0.016 in)
Outside diameter of connecting rod bolt
Limit 0.1 mm (0.004 in)
Connecting rod bearing oil clearance
Standard value 0.018 - 0.045 mm (0.0007 - 0.0018 in)
Limit 0.1 mm (0.004 in)
Connecting rod cap bolt 5.0 Nm (44 in-lb) plus 20 Nm (15 ft-lb) + 90°