LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2009 >> Lancer DE, Standard >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycle Procedures >> 2011-12 Lancer 2.0L Turbo >> Pattern 9 >> Test Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Test Procedure

  1. Start the engine with all the accessories switched OFF.
  2. Drive the vehicle for 6 minutes at the following conditions. (During the monitor)
    • Vehicle speed: More than 50 km/h (31 mph)
    • Air flow rate: More than 10 g/sec. The system is normal if engine coolant temperature will rise more than 77°C (171°F) within 6 minutes.
  3. Stop at safe place and turn the ignition switch to "LOCK" (OFF) position.
  4. Start the engine and do Steps 1 to 3 again.
  5. Confirm that the diagnostic trouble code (DTC) is not output.
scientia non olet · About LEMON Manuals