LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2009 >> Lancer ES, Automatic CVT >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Passenger's (Front) Air Bag Module >> Passenger's (Front) Air Bag Module Removal And Installation >> Removal Service Points >> <<B>> Passenger's (Front) Air Bag Module Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

<<B>> Passenger's (Front) Air Bag Module Removal

WARNING:
  • The air bag module must not be measured with such equipment as an ohmmeter.
  • The air bag module must not be disassembled.
  • The removed air bag module should be stored in a clean, dry place with the deployment surface facing up.

Insert a flat-tipped screwdriver or similar tool to the location shown in the figure. After disengaging the tabs, remove the passenger's (front) air bag module.

Fig 1: Inserting Flat-Tipped Screwdriver To Passenger's (Front) Air Bag Module
G05906159Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals