LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2009 >> Lancer ES, Automatic CVT >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> CVT Diagnosis & On-Vehicle Service >> Transaxle Assembly >> Removal And Installation >> Installation Service Points >> >>C<<Transaxle Control Cable (Transaxle Side) Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>C<<Transaxle Control Cable (Transaxle Side) Installation

  1. Move the selector lever and manual control lever to the N position.
  2. Use the adjusting nut to tighten the transaxle control cable to the specified torque.

    Tightening torque: 9.5 ± 3.5 N.m (84 ± 31 in-lb) 

    Fig 1: Identifying Transmission Control Cable And Adjusting Nut
    G05375810Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals