Diagnostic Trouble Code Chart
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), diagnostic trouble code(s) associated with other system may be set. On completion, confirm all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.
ETACS-ECU
DIAGNOSTIC TROUBLE CODE CHART
| Diagnostic trouble code No. | Diagnostic item |
|---|---|
| B16A2 | Blown turn-signal light (LH) bulb |
| B16A3 | Turn-signal light (LH) short circuit |
| B16A4 | Blown turn-signal light (RH) bulb |
| B16A5 | Turn-signal light (RH) short circuit |
LIN
DIAGNOSTIC TROUBLE CODE CHART
| Diagnostic trouble code No. | Diagnostic item | ||
|---|---|---|---|
| L0432 | RLS(1) RS adaptation error | ||
| L0434 | RLS(1) rain sensor error | ||
| L0436 | RLS(1) light sensor error | ||
|
|||