Column Switch (Switch Body Part) Continuity Check
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the lighting switch and wiper/washer switch.
- Check that the continuity is present for the same terminal numbers of the column switch body connectors that remain on the steering column.CONTINUITY SPECIFICATION
Column switch body Terminal number Normal condition Lighting switch side connector Wiper/washer switch side connector 3 - 3
6 - 6
7 - 7
8 - 8
9 - 9
10 - 10
11 - 11Continuity exists (Less than 2 ohms)