Service Specifications
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE SPECIFICATIONS
| Item | Standard value | Limit | |
|---|---|---|---|
| Brake pedal height mm (in) | 219.8 - 227.8 (8.7 - 9.0) | - | |
| Dimension from the brake booster stud bolt end to the clevis hole center mm (in) | 74 (2.91) | - | |
| Brake pedal free play mm (in) | 3 - 8 (0.12 - 0.31) | - | |
| Pedal-to-floor clearance when brake pedal is depressed mm (in) [Pedal depression force: approx. 500 N] | 85 (3.35) or more | - | |
| Front disk brake | Brake pad thickness mm (in) | 9.85 (0.39) | 2.0 (0.08) |
| Brake disk thickness mm (in) | 32.0 (1.26) | 30.0 (1.18) | |
| Brake disk run-out mm (in) | - | 0.06 (0.0024) | |
| Brake drag force N (lb) | 68 (15.3) or less | - | |
| Rear disk brake | Brake pad thickness mm (in) | 9.0 (0.35) | 2.0 (0.08) |
| Brake disk thickness mm (in) | 22.0 (0.87) | 20.0 (0.79) | |
| Brake disk run-out mm (in) | - | 0.08 (0.0032) | |
| Brake drag force N (lb) | 68 (15.3) or less | - | |
| Brake pedal distortion mm (in) | M/T | 240 - 246 (9.4 - 9.7) | - |
| TC-SST | 242 - 248 (9.5 - 9.8) | - | |