LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2009 >> Lancer ES, Standard >> Repair and Diagnosis >> Steering >> Steering Column >> Power Steering Gear Box And Linkage >> Disassembly And Assembly >> Assembly Service Points >> >>B<< Lock Nut/Tie-Rod End Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>B<< Lock Nut/Tie-Rod End Installation

Screw in the tie-rod to the length shown in the figure, and hand-tighten the lock nut.

NOTE: Install the steering gear and linkage to the body, adjust the toe-in, and then tighten the lock nut to the specified torque.
Fig 1: Identifying Tie-Rods Measurement Value
G05905027Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals