Service Specifications
SERVICE SPECIFICATIONS
| Item | Standard value | Limit | ||
|---|---|---|---|---|
| Steering wheel free play mm (in) | With engine running | - | 30 (1.2) or less | |
| With engine stopped | 16.5 (0.65) or less | - | ||
| Steering angle | Inner wheel | 40°50' ± 1°30' | - | |
| Outer wheel (reference value) | 33°50' | - | ||
| Toe-in mm (in) | 1 ± 2 (0.04 ± 0.08) | - | ||
| Tie rod end ball joint rotation torque N.m (in-lb) | 2.9 (26) or less | - | ||
| Tie rod oscillating resistance N (lb) [Tie rod oscillating torque N.m (in-lb)] | 5.5 - 18 (1.2 - 4.0) [1.5 - 4.9 (13.3 - 43.4)] | - | ||
| Engine idle speed r/min | 700 ± 50 | - | ||
| Stationary steering effort N (lb) [Fluctuation allowance N (lb)] | 29 (6.5) or less [5.9 (1.33) or less] | - | ||
| Oil pump pressure MPa (psi) | Oil pump relief pressure | Except 2.0L - Turbo Engine | 8.8 - 9.5 (1,276 - 1,378) | - |
| 2.0L - Turbo Engine | 8.1 - 8.8 (1,175 - 1,276) | |||
| Pressure under no-load conditions | Except 2.0L - Turbo Engine | 0.2 - 0.7 (29 - 102) | - | |
| 2.0L - Turbo Engine | 1.0 (145) | |||
| Steering gear retention hydraulic pressure | Except 2.0L - Turbo Engine | 8.8 - 9.5 (1,276 - 1,378) | - | |
| 2.0L - Turbo Engine | 8.1 - 8.8 (1,175 - 1,276) | |||
| Steering gear total pinion torque N.m (in-lb) [Change in torque N.m (in-lb)] | 1.0 - 2.0 (0.8 - 1.6) [0.4 (3.5) or less] | - | ||
| Band crimped width mm (in) | 2.4 - 2.8 (0.09 - 0.11) | - | ||