Removal and Replacement

KNOCK SENSOR

REMOVAL AND INSTALLATION [2.0L ENGINE NON-TURBO, 2.4L ENGINE]

CAUTION:
- When the knock sensor replacement is performed, use scan tool MB991958 to initialize the learning value.
- Do not drop or hit the knock sensor against other components. Internal damage may result, and the knock sensor will need to be replaced.

Pre-removal & Post-Installation Operation:

Removal Steps 1-2:

REMOVAL SERVICE POINT

[A] THROTTLE BODY MOUNTING BOLTS REMOVAL

Remove the throttle body mounting bolts and put the throttle body aside so as not to interfere the knock sensor connector disconnection.