How To Operate The Scan Tool MB991958: Notes

CAUTION: Before setting, if the combination meter does not start measuring the elapsed time, turn the ignition switch to the ON position while pressing the meter information switch to start a measurement.

Connect the scan tool MB991958 to the data link connector.
Start the M.U.T.-III system on the PC and turn the ignition switch to the "ON" position.
Select "Meter" on the "System Select" screen, and press the "OK" button.
Select "Special Function" on the next screen.
Select "Service Reminder" on the "Special function" screen.
Select the function to be executed from "Function List."
- 1 Reminder reset (Indicator off) (Refer to).
- 2 Next schedule reminder cancel (Refer to).
- 3 Extra reminder setting (Refer to).
- 4 Extra reminder cancel (Refer to).
- 5 Periodic reminder schedule set (Refer to).
- 6 Integrated value adjustment (Refer to).
- 7 Optional INT schedule setting (Refer to).
  
  Fig 1: Scan Tool Screen Display - Special Function
  Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.