Diagnostic Procedure
WARNING: This page is about a different car, the 2008 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- STEP 1. Verify the keyless entry system.
Q: Does the keyless entry system work normally?
YES : Go to Step 2.
NO : Refer to TROUBLE SYMPTOM CHART .
- STEP 2. Check the customize function.
The "Timer lock timer" has been set to one of the followings with the customization function. Check if the doors are locked at the set period.
- 30sec
- 60sec
- 120sec
- 180sec
Q: Is the check result normal?
YES : Go to Step 3.
NO : Set "Timer lock timer" to one of the time above with a customization function (refer to CONFIGURATION FUNCTION ).
- STEP 3. Check of the troubles
Check that the keyless entry system works normally.
Q: Is the check result normal?
YES : Intermittent malfunction (refer to HOW TO COPE WITH INTERMITTENT MALFUNCTIONS ).
NO : Replace ETACS-ECU.