Selector Lever Operation Check
- Depress and lock the parking brake pedal.
- Move the selector lever to every range and check that the lever moves smoothly with secure feel of engagement.
- Make sure that the engine starts when the selector lever is in the N or P range, and does not start when the selector lever is in other range.
- Start the engine. Depress the parking brake pedal again to release it.
- Make sure that the vehicle moves forward when the selector lever is moved from the N range to D range, or to the 1st to 6th speed in the sports mode. Also make sure that the vehicle moves backward when the selector lever is moved from the N to R range.
- Stop the engine.
- Turn ON the ignition switch, and move the selector lever from the P to R range. Check that the backup lamp comes on and the buzzer sounds at this time.
NOTE:
Since the vehicle is equipped with the CVT wrong-operation preventive device, the selector lever cannot be moved out of the P position without depressing the brake pedal after turning ON the ignition switch.