Control Circuit Testing

The starter control circuit components should be tested in the order in which they are listed, as follows  :

• Starter Relay  - Refer to Starter Relay  . The starter relay is located within the TIPM (Totally Integrated Power Module)  . Refer to "NO CRANK CONDITION ".
• Starter Solenoid  - Refer to STARTER MOTOR .
• Ignition Switch  - Refer to  IGNITION SWITCH AND KEY LOCK CYLINDER  . 
• Clutch Pedal Position Switch  - If equipped with manual transmission, refer to  CLUTCH PEDAL POSITION SWITCH  . 
• Park/Neutral Position Switch  - If equipped with automatic transmission, refer to  PARK/NEUTRAL POSITION SWITCH  . .
• Wire harnesses and connections  - refer to appropriate SYSTEM WIRING DIAGRAMS.