Data List Reference Table
The following items can be read by the scan tool from the TCL/ASC-ECU input data. (Refer to HOW TO CONNECT THE SCAN TOOL (M.U.T.-III) ).
DATA LIST REFERENCE
| M.U.T.-III SCAN TOOL DISPLAY | ITEM NO. | CHECK ITEM | CHECKING REQUIREMENTS | NORMAL VALUE |
|---|---|---|---|---|
| FR wheel speed sensor | 01 | Front right wheel speed sensor | Drive the vehicle | Vehicle speeds displayed on the speedometer and scan tool are identical. |
| FL wheel speed sensor | 02 | Front left wheel speed sensor | ||
| RR wheel speed sensor | 03 | Rear right wheel speed sensor | ||
| RL wheel speed sensor | 04 | Rear left wheel speed sensor | ||
| Battery voltage | 05 | TCL/ASC-ECU power supply voltage | Ignition switch power supply voltage and valve monitor voltage | Battery positive voltage |
| Stoplight switch | 06 | Stoplight switch | Depress the brake pedal. | ON |
| Release the brake pedal. | OFF | |||
| Straight G sensor | 30 | Straight G | -9.8 - 9.8 m/s2 | |
| Lateral G sensor | 31 | Lateral G | -9.8 - 9.8 m/s2 | |
| Steering angle | 32 | Steering angle | -900 - 900 deg | |
| Yaw rate sensor | 33 | Yaw rate | -50 - 50 deg/s | |
| Master cylinder pressure | 34 | Master cylinder pressure | The value fluctuates significantly as the brake pedal is depressed. | 0 - 5 V |
| TCL mode | 35 | TCL operation | When the TCL outputs the operation permission signal during driving | ON |
| When the TCL outputs the operation inhibition signal during driving | OFF | |||
| Brake indicator lamp | 36 | Brake warning light | Depress the brake pedal. | ON |
| Release the brake pedal. | OFF | |||
| ASC disable state | 37 | Whether the ASC control is possible or not | Possible | Enable |
| Impossible | disable | |||
| Sum of ASC disable state | 38 | Number of times the ASC control is impossible | 0 - 255 | |