LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2010 >> Lancer ES, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Basic Brake System - Lancer SPORTBACK) >> On-Vehicle Service >> Check Valve Operation Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Valve Operation Check

WARNING: This page is about a different variant/trim than selected.
  1. Remove the check valve (Refer to REMOVAL AND INSTALLATION <2.0 L ENGINE>  or REMOVAL AND INSTALLATION <2.4 L ENGINE> ).
    CAUTION: Replace the check valve when it is faulty.
  2. Using a vacuum pump, check operation of the check valve.
    OPERATION CHART

    Vacuum pump connection Normal condition
    When connected to the booster side (1) Vacuum is generated and maintained.
    When connected to the engine side (2) No vacuum is generated.
    Fig 1: Checking Operation Of Check Valve
    G05376264Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals