LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2010 >> Lancer ES, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Basic Brake System - Lancer SPORTBACK) >> Service Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Service Specifications

WARNING: This page is about a different variant/trim than selected.
SERVICE SPECIFICATION

Item Standard value Limit
Brake pedal height mm (in) 219.8 - 227.8 (8.7 - 9.0) -
Dimension from the brake booster stud bolt end to the clevis hole center mm (in) 75.8 - 80.2 (2.98 - 3.16) -
Brake pedal free play mm (in) 3 - 8 (0.12 - 0.31) -
Pedal-to-floor clearance when brake pedal is depressed mm (in)
[Pedal depression force: approx. 500 N]
85 (3.35) or more -
Brake pedal distortion mm Distance from the pedal pad surface to the level surface M/T 240 - 245 (9.4 - 9.6) -
CVT, TC-SST 239 - 248 (9.4 - 9.8) -
Fluid pressure generated by brake booster non-servo effect test kPa (psi) Pedal depression force: 100 N (22.5 lb) 2.0 L Engine 0 - 510 (0 - 74) -
2.4 L Engine 0 - 590 (0 - 85) -
Pedal depression force: 300 N (67.4 lb) 2.0 L Engine 1,170 - 1,880 (170 - 273) -
2.4 L Engine 1,360 - 2,180 (197 - 316) -
Fluid pressure generated by brake booster servo effect test kPa (psi) Pedal depression force: 100 N (22.5 lb) 2.0 L Engine 4,180 - 5,470 (606 - 794) -
2.4 L Engine 4,850 - 6,460 (703 - 937) -
Pedal depression force: 300 N (67.4 lb) 2.0 L Engine 9,110 - 9,820 (1,322 - 1,425) -
2.4 L Engine 10,550 - 11,380 (1,530 - 1,650) -
Front disk brake Brake pad thickness mm (in) 10.0 (0.39) 2.0 (0.08)
Brake disk thickness mm (in) 2.0 L Engine 24.0 (0.94) 22.4 (0.88)
2.4 L Engine 26.0 (1.02) 24.4 (0.96)
Brake disk run-out mm (in) - 0.06 (0.0024)
Brake drag force N (lb) 2.0 L Engine 85 (19.1) or less -
2.4 L Engine 68 (15.3) or less -
Rear disk brake Brake pad thickness mm (in) 10.0 (0.39) 2.0 (0.08)
Brake disk thickness mm (in) 10.0 (0.39) 8.4 (0.33)
Brake disk run-out mm (in) - 0.08 (0.0032)
Brake drag force N (lb) 68 (15.3) or less -