Customization Function
WARNING: This page is about a different variant/trim than selected.
By operating the ETACS system or MMCS of scan tool MB991958, the following functions can be programmed. The programmed information is held even when the battery is disconnected.
CUSTOMIZATION FUNCTION CHART
| Adjustment item (scan tool MB991958 display) | Adjustment item | Adjusting contents (scan tool MB991958 display) | Adjusting contents |
|---|---|---|---|
| Hazard answer back | Adjustment of the number of keyless hazard warning light answer back flashes | Lock:1, Unlock:2 | LOCK: Flashes once, UNLOCK: Flashes twice (initial condition) |
| Lock:1, Unlock:0 | LOCK: Flashes once, UNLOCK: No flash | ||
| Lock:0, Unlock:2 | LOCK: No flash, UNLOCK: Flash twice | ||
| Lock:2, Unlock:1 | LOCK: Flash twice, UNLOCK: Flash once | ||
| Lock:2, Unlock:0 | LOCK: Flash twice, UNLOCK: No flash | ||
| Lock:0, Unlock:1 | LOCK: No flash, UNLOCK: Flash once | ||
| Lock:0, Unlock:0 | No function | ||
| Dome light delay timer with door | Adjustment of interior light delay shutdown time | 0sec | 0 second |
| 7. 5sec | 7. 5 seconds | ||
| 15 sec | 15 seconds | ||
| 30sec | 30 seconds (initial condition) | ||
| 60sec | 60 seconds | ||
| 120sec | 120 seconds | ||
| 180sec | 180 seconds | ||
| Welcome light | Disabling or enabling welcome light function <Vehicles with color liquid crystal meter> | Disabled | No function |
| Small light | Tail light illuminates. (initial condition) | ||
| Head light | Headlight illuminates. | ||
| Door unlock mode | Adjustment of power door locks with selective unlocking | All doors unlock | Without function: The first operation of keyless entry system or unlock operation by KOS unlocks all doors. |
| Dr door unlock | With function: The first operation of keyless entry system or unlock operation by KOS unlocks the driver's door only, and the second unlock operation within 2 seconds after that unlocks all doors. (initial condition) | ||
| Auto door unlock | Adjustment of the auto door unlock function | Disabled | Without function (initial condition) <M/T, CVT, TC-SST> |
| Always (P pos) | With function: Operates when the shift lever or the selector lever is moved to the P position. <CVT, TC-SST> | ||
| P/W unlock (P) | With function: Operates when the shift lever or the selector lever is moved to the P position with the power window lock switch in the OFF position. <CVT, TC-SST> | ||
| Always(Lock pos) | With function: Operates when the ignition switch is moved to the LOCK (OFF) position. <M/T, CVT, TC-SST> | ||
| P/W unlock(Lock) | With function: Operates when the ignition switch is turned to the LOCK (OFF) position with the power window lock switch in the OFF position. <M/T, CVT, TC-SST> | ||
| Duration of horn chirp | Horn sounding time during horn answer back | Short | 0.01 second (initial condition) |
| Long | 0.02 second | ||
| Horn chirp by keyless | Horn chirp by keyless entry system <vehicles without auto light> | Not sound horn | No horn answerback function |
| Lock any time | The horn sounds when the lock button of keyless entry transmitter is pressed once. | ||
| W lock any time | The horn sounds when the lock button of keyless entry transmitter is pressed twice. (initial condition) | ||
| Horn chirp by keyless entry system <vehicles with auto light> | Not sound horn | No horn answerback function | |
| Lock any time | The horn sounds when the lock button of keyless entry transmitter is pressed once. | ||
| Lock/auto ON | During daytime, while the lighting switch is in the AUTO position, the horn sounds once when the lock is pressed once. | ||
| W lock any time | The horn sounds when the lock button of keyless entry transmitter is pressed twice. (initial condition) | ||
| Timer lock timer | Timer lock period adjustment | 30sec | 30 seconds (initial condition) |
| 60sec | 60 seconds | ||
| 120sec | 120 seconds | ||
| 180sec | 180 seconds | ||
| Panic alarm switch | With/without panic alarm function | Disable | No function |
| Enable | With function (initial condition) |