LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis (Single Page) >> Steering >> Steering Column >> Power Steering -- Lancer >> Steering Column Shaft Assembly >> Removal And Installation >> Removal Service Points >> <<C>> Steering Column Shaft Assembly Disconnection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

<<C>> Steering Column Shaft Assembly Disconnection

  1. Remove the steering column bolt connecting the steering gear to the steering column assembly.
  2. Disconnect the steering gear from the steering column assembly while sliding the shaft A to the shaft B with the clip claw as shown in the illustration is pinched.
  3. Remove the steering column mounting bolt.
    Fig 1: Identifying Steering Column Mounting Bolt And Steering Shaft Clip And Claw
    G06673014Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals