LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis (Single Page) >> Transmission >> Manual Trans >> Manual Transaxle Overhaul -- Lancer >> Transaxle >> Disassembly And Assembly >> Assembly Service Points >> >>D<< Transaxle Case Assembly Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>D<< Transaxle Case Assembly Installation

  1. Completely degrease the FIPG-applied surface so that water and oil including the old sealant cannot adhere to the surface coated with the sealant.

    Never touch the degreased surface by hand.

  2. Apply a 1.2 mm (0.05 inch) diameter bead of sealant as illustrated onto the transaxle case assembly.

    Specified sealant: Mitsubishi Part No. MD974421 or equivalent 

    Fig 1: Identifying Sealant Applying Area Onto Transaxle Case Assembly
    G06672109Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals