LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2010 >> Lancer Evolution MR >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Wireless Control Module (WCM) - Lancer Evolution >> On-Vehicle Service >> Id Codes Registration Procedure >> Registration Using Scan Tool MB991958 (M.U.T.-III Sub Assembly) >> "Keyless ID Reg." METHOD
April 5, 2026: LEMON Manuals is launched! Read the announcement.

"Keyless ID Reg." METHOD

  1. On the "Keyless ID Reg." screen, enter the password and press the OK button.
  2. Register within 1 minute and send the programming packet* to register the keyless ID. To register multiple keys, register the next key within 1 minute from the registration operation of previous key. Complete the registration of necessary keys, then press the OK button to finish the keyless ID registration.
    Fig 1: Screen Display - Keyless ID Reg
    G05384481Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    NOTE:
    • Up to eight ignition keys can be registered.
    • *: Programming packet sending procedure Complete the following steps  1 to  3 within four seconds.
      1. Press and hold both the lock and the unlock switch for 1 second or longer.
      2. Release both the lock and the unlock switch for 0.5 second or longer.
      3. Press the unlock switch.
  3. Push the OK button after "Keyless ID Registration was finished." is displayed.
  4. Check number of the keyless IDs registered.
    Fig 2: Screen Display - Keyless IDs Registered
    G05384482Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals