<<A>> Wiper Link Assembly Removal
WARNING: This page is about a different variant/trim than selected.
- Manually turn the link rod of the wiper link assembly forward to the position indicated in the figure.CAUTION: Another mechanic fully pushes up the hood so that the left side of link assembly is pulled out easily.
- Pull out the attachment section of the left side of wiper link assembly forward until the link rod bumps against the front deck garnish retainer.CAUTION: When pulling out the link assembly forward, be careful not to make a contact with the windshield glass.
- While turning the link assembly upward (A), pull out the entire link assembly diagonally forward left (B).