LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2010 >> Lancer Evolution SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Front Axle - Lancer SPORTBACK) >> Driveshaft Assembly >> Removal And Installation >> Installation Service Points >> >>B<< Stabilizer Link Connection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>B<< Stabilizer Link Connection

WARNING: This page is about a different variant/trim than selected.

Use a hexagon wrench to install the stabilizer link and strut connection nut as shown in the illustration.

Fig 1: Identifying Stabilizer Link And Strut Connection Nut
G05432090Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals