Sensor Check

The speed sensor and gyro sensor will be checked, depending on the vehicle conditions such as driving condition, stationary condition and travel direction change.

1. Select "Sensor Check" on "Service" screen.
   Fig 1: Display - Service Screen

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
2. The sensor check with the vehicle stationary will be executed in accordance with the screen.
   Fig 2: Display - Sensor Check Screen With Vehicle Stationary (1 Of 2)

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
   Fig 3: Display - Sensor Check Screen With Vehicle Stationary (2 Of 2)

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
3. The sensor check with the vehicle in motion will be executed in accordance with the screen.
   Fig 4: Display - Sensor Check Screen With Vehicle In Motion

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
4. When the sensor checks are complete, the screen will display the check results.
   NOTE: If there is "NG" or "N/A" as the check results, select "NG Code" on the "Sensor Check" screen. Then "NG code Indication" screen will show the NG code.
   Fig 5: Display - Check Results Screen

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

   NG CODE REFERENCE TABLE FOR SENSOR CHECK 

   NG CODE REFERENCE CHART
   
   

   Sensor classification	NG code No.	Error items
   Gyro sensor	1	Offset error while the vehicle is stationary (lower limit error)
   	2	Offset error while the vehicle is stationary (upper limit error)
   	5	Output error during driving
   Speed sensor	6	Output error while the vehicle is stationary

   Fig 6: Display - NG Code Indication Screen

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.