LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2010 >> Lancer Evolution SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Continuously Variable Transaxle On-Vehicle Service -- Lancer) >> Diagnosis >> How To Initialize CVT Learned Value >> Initialization Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Initialization Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Move the selector lever to the "P" range and turn the ignition switch to the "LOCK" (OFF) position. Then, connect M.U.T.-III to the diagnosis connector.
  2. Turn the ignition switch to the "ON" position, and then move the selector lever to the "R" range.
  3. Depress the accelerator pedal while depressing the brake pedal. (Engine is not runnning.) Using the MUT-III, execute the clear DTC function for the CVT ECU (even if no codes are set).
    NOTE: Performing initialization of the learned value will also erase the diagnosis code.
scientia non olet · About LEMON Manuals