LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2010 >> Lancer Evolution SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Active Stability Control System (ASC) -- Lancer) >> ASC Off Switch >> Inspection >> ASC Off Switch Continuity Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ASC Off Switch Continuity Check

WARNING: This page is about a different variant/trim than selected.
  1. As shown in the illustration, connect the circuit tester to the ASC OFF switch as a single unit.
  2. Check the continuity when the ASC OFF switch is pressed and released.
    CONTINUITY SPECIFICATION

    Item When the ASC OFF switch is released (No operation status) When the ASC OFF switch is pressed
    Continuity between terminal No. 1 and No. 2 No continuity Continuity exists. (2 Ω or less)
    Continuity between terminal No. 3 and No. 4 Continuity exists. Continuity exists.
    Fig 1: Checking Continuity Between ASC OFF Switch Terminals
    G06665951Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals