LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2010 >> Lancer Evolution SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (Engine Intake System And Exhaust System - Lancer) >> Intake Manifold >> Removal And Installation (2.0L Engine Turbo) >> Installation Service Points >> >>A<< Number 2 Intake Air Temperature Sensor Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>A<< Number 2 Intake Air Temperature Sensor Installation

WARNING: This page is about a different variant/trim than selected.

Tighten the number 2 intake air temperature sensor to the specified torque by using special tool MB992188.

Tightening torque: 14 ± 1 N.m (120 ± 13 in-lb) 

Fig 1: Identifying Intake Air Temperature Sensor
G06671821Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals