Customization Function
WARNING: This page is about a different variant/trim than selected.
By operating the ETACS system or MMCS of scan tool MB991958, the following functions can be programmed. The programmed information is held even when the battery is disconnected.
CUSTOMIZATION FUNCTION CHART
| Adjustment item (scan tool display) | Adjustment item | Adjusting contents (scan tool display) | Adjusting contents |
|---|---|---|---|
| Front wiper operation | Adjustment of the intermittent windshield wiper operation <vehicles without auto light> | Normal INT | Intermittent wiper interval is fixed to 4 seconds. |
| Variable INT | Intermittent wiper interval is calculated only by the wiper volume control. | ||
| Speed Sensitive | Intermittent wiper interval is calculated according to the intermittent wiper volume control and vehicle speed (default). | ||
| Adjustment of the intermittent windshield wiper operation <vehicles with auto light> | Normal INT | Intermittent wiper interval is fixed to 4 seconds. | |
| Variable INT | Intermittent wiper interval is calculated only by the wiper volume control. | ||
| Speed Sensitive | Intermittent wiper interval is calculated according to the intermittent wiper volume control and vehicle speed. | ||
| Rain Sensitive | Intermittent wiper interval is calculated according to the intermittent wiper volume control and lighting control sensor (default). | ||
| Front wiper washer | Disabling or enabling washer-linked wiper function | Only washer | No function |
| Washer & wiper | With function (default) |