LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2010 >> Lancer Evolution SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 68 (Electronic Time And Alarm Control System (ETACS) - Lancer Evolution) >> Troubleshooting >> Input Signal Procedures >> Inspection Procedure 10: ETACS-ECU does not receive any signal from the hazard warning light switch >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure 10: ETACS-ECU does not receive any signal from the hazard warning light switch: Notes

WARNING: This page is about a different variant/trim than selected.
Fig 1: Hazard Warning Switch Circuit Diagram
G06678535Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.