LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2010 >> Lancer Evolution SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 99 (Door System - Lancer Evolution) >> Check At Ecu Terminal >> Power Window Switch Terminal Check >> Power Window Main Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Window Main Switch

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Power Window Main Switch And E-15 Connector Terminals
G05394913Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
TERMINALS REFERENCE CHART

Terminal No. Check items Check conditions Normal conditions
1 Output to power window motor (Passenger's side) - -
2 Output to power window motor (Driver's side) - -
3 Output to power window motor (Passenger' side) - -
4 Power supply Power window relay: ON Battery positive voltage
5 Power supply Always Battery positive voltage
6 Output to power window motor (Driver's side) - -
7 LIN communication line (between ETACS-ECUs) Always 0 to 12 V (pulse signal)
8 Input from power window motor (pulse sensor signal) When the power windows are operating 0 to 5 V (pulse signal)
9 Input from power window motor (pulse sensor ground) - 1 V or less
10 Ground Always 1 V or less
11 Input from power window motor (pulse sensor signal) When the power windows are operating 0 to 5 V (pulse signal)
12 Input from power window motor (power supply to pulse sensor) When the power windows are operating 5 V
13 - - -
14 - - -
15 Output to power window motor (Rear right side) - -
16 - - -
17 Output to power window motor (Rear right side) - -
18 Output to power window motor (Rear left side) - -
19 Output to power window motor (Rear left side) - -