Customization Function
WARNING: This page is about a different variant/trim than selected.
By operating the ETACS system or MMCS of scan tool MB991958, the following functions can be programmed. The programmed information is held even when the battery is disconnected.
ADJUSTMENT ITEM CHART
| Adjustment item (scan tool MB991958 M.U.T.-III display) | Adjustment item | Adjusting contents (scan tool MB991958 display) | Adjusting contents |
|---|---|---|---|
| Auto door unlock | Adjustment of the auto door unlock function | Disabled | Without function (initial condition) <M/T, TC-SST> |
| Always (P pos) | With function: Operates when the shift lever or the selector lever is moved to the P position. <TC-SST> | ||
| P/W unlock (P) | With function: Operates when the shift lever or the selector lever is moved to the P position with the power window lock switch in the OFF position. <TC-SST> | ||
| Always(Lock pos) | With function: Operates when the ignition switch is moved to the LOCK (OFF) position. <M/T, TC-SST> | ||
| P/W unlock(Lock) | With function: Operates when the ignition switch is turned to the LOCK (OFF) position with the power window lock switch in the OFF position. <M/T, TC-SST> |