LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2010 >> Outlander ES, AWD >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System >> Power Steering Gear Box And Linkage >> Disassembly And Assembly >> Assembly Service Points >> >> B << Lock Nut/Tie-Rod End Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> B << Lock Nut/Tie-Rod End Installation

Screw in the tie-rod to the length shown below, and hand-tighten the lock nut.

NOTE: Install the steering gear & linkage to the body, adjust the toe-in, and then tighten the lock nut to the specified torque.
Fig 1: Identifying Tie-Rod Length
G06483017Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals