LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2011 >> Eclipse GS, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System >> Automatic Transaxle Diagnosis >> How To Initialize A/T Learned Value >> Initialization Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Initialization Procedure

  1. Shift the selector lever to P and turn the ignition switch to the "LOCK" (OFF) position.
  2. Connect the M.U.T.-III to the vehicle's data link connector.
  3. In the ELC-A/T menu screen, select "Special Function," then select "Memory Reset."
  4. Select "OK" to reset the A/T learned memory.
  5. After this initialization, make the system learn the idling in accordance with "Learning procedure for idling in MFI engine" (Refer to PRECAUTIONS BEFORE SERVICE ).
    NOTE: This reset procedure will also automatically initialize the INVECS-II Learned Value. A/T DTCs and A/T freeze-frame data will be erased. (Engine DTCs, engine-related freeze-frame data, and Readiness status will remain even after A/T Learned Value is reset.)
scientia non olet · About LEMON Manuals