>>A<< Dynamic Damper <LH/RH>/Damper Band <RH>/TJ Boot Installation
CAUTION:
There should be no grease adhered to the rubber part of the dynamic damper.
- Install the dynamic damper in the position (L) shown in the illustration.
L: 260 ± 3 mm (10.2 ± 0.12 inches) <LH>
L: 406 ± 3 mm (16.0 ± 0.12 inches) <RH>
- Secure the damper bands.
- Wrap plastic tape around the shaft spline, and then install the TJ boot band (small) and TJ boot.