Removal And Installation: Notes
CAUTION:
- Do not strike the ABS rotors installed to the BJ or EBJ outer race of driveshaft against other parts when removing or installing the driveshaft. Otherwise the ABS rotors will be damaged.
- Be careful not to strike the pole piece at the tip of the front wheel speed sensor with tools during servicing work.
Required Special Tools:
- MB990211: Slide Hammer
- MB990242: Puller Shaft
- MB990244: Puller Bar
- MB990767: Front Hub and Flange Yoke Holder
- MB991354: Puller Body
- MB991897: Ball Joint Remover