Fastener Tightening Specifications
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Transmission fluid drain plug | 32 ± 2 N.m (23 ± 2 ft-lb) |
| Transmission range switch | |
| Transmission range switch body mounting bolt | 11 ± 1 N.m (96 ± 8 in-lb) |
| Transaxle control | |
| Adjusting nut | 12 ± 2 N.m (107 ± 17 in-lb) |
| Selector lever assembly attaching bolt | 12 ± 2 N.m (102 ± 22 in-lb) |
| Shift lock cable unit fixing bolt | 5.0 ± 1.0 N.m (44 ± 9 in-lb) |
| Transaxle control cable attaching bolt | 12 ± 2 N.m (102 ± 22 in-lb) |
| A/T key interlock and shift lock mechanisms | |
| Shift lock cable unit fixing bolt | 5.0 ± 1.0 N.m (44 ± 9 in-lb) |
| Transaxle assembly <4A/T> | |
| Adjusting nut | 12 ± 2 N.m (107 ± 17 in-lb) |
| ATF warmer (transmission fluid cooler) bracket attaching bolt | 23 ± 3 N.m (17 ± 2 ft-lb) |
| Bell housing cover attaching bolt (engine side) | 9.0 ± 1.0 N.m (80 ± 9 in-lb) |
| Bell housing cover attaching bolt (transaxle side) | 26 ± 5 N.m (19 ± 4 ft-lb) |
| Center member attaching bolt | 83 ± 12 N.m (61 ± 9 ft-lb) |
| Drive plate bolt | 49 ± 3 N.m (36 ± 2 ft-lb) |
| Drive shaft nut | 226 ± 29 N.m (167 ± 21 ft-lb) |
| Front roll stopper bracket retainer nut | 58 ± 7 N.m (43 ± 5 ft-lb) |
| Rear roll stopper bracket attaching bolt | 90 ± 10 N.m (67 ± 7 ft-lb) |
| Rear roll stopper bracket retainer nut | 58 ± 7 N.m (43 ± 5 ft-lb) |
| Self-locking nut (lower arm ball joint connection) | 65 ± 6 N.m (48 ± 4 ft-lb) |
| Self-locking nut (tie rod end connection) | 29 ± 4 N.m (21 ± 3 ft-lb) |
| Stabilizer link to strut connecting nut | 48 ± 7 N.m (36 ± 5 ft-lb) |
| Starter motor attaching bolt | 30 ± 3 N.m (23 ± 2 ft-lb) |
| Transaxle assembly upper part coupling bolt | 48 ± 6 N.m (36 ± 4 ft-lb) |
| Transaxle assembly lower part coupling bolt | 48 ± 6 N.m (36 ± 4 ft-lb) |
| Transaxle mounting body side bracket attaching nut | 58 ± 7 N.m (43 ± 5 ft-lb) |
| Transaxle mounting stopper attaching nut | 113 ± 12 N.m (83 ± 9 ft-lb) |
| Transaxle assembly <5A/T> | |
| Adjusting nut | 12 ± 2 N.m (107 ± 17 in-lb) |
| Center member attaching bolt | 83 ± 12 N.m (61 ± 9 ft-lb) |
| Cover attaching bolt | 11 ± 0.5 N.m (93 ± 4 in-lb) |
| Drive shaft and inner shaft assembly bolt (RH) | 41 ± 4 N.m (30 ± 3 ft-lb) |
| Drive shaft nut | 226 ± 29 N.m (167 ± 21 ft-lb) |
| Engine oil pan and transaxle coupling bolt | 35 ± 6 N.m (26 ± 4 ft-lb) |
| Front roll stopper bracket retainer nut | 58 ± 7 N.m (43 ± 5 ft-lb) |
| Rear roll stopper bracket attaching bolt | 90 ± 10 N.m (67 ± 7 ft-lb) |
| Rear roll stopper bracket retainer nut | 58 ± 7 N.m (43 ± 5 ft-lb) |
| Self-locking nut (lower arm ball joint connection) | 65 ± 6 N.m (48 ± 4 ft-lb) |
| Self-locking nut (tie rod end connection) | 29 ± 4 N.m (21 ± 3 ft-lb) |
| Stabilizer link to strut connecting nut | 48 ± 7 N.m (36 ± 5 ft-lb) |
| Torque converter and drive plate bolt | 49 ± 3 N.m (36 ± 2 ft-lb) |
| Transaxle assembly upper part coupling bolt | 73 ± 10 N.m (54 ± 7 ft-lb) |
| Transaxle assembly lower part coupling bolt | 88 ± 10 N.m (65 ± 7 ft-lb) |
| Transaxle mounting body bracket attaching nut | 58 ± 7 N.m (43 ± 5 ft-lb) |
| Transaxle mounting stopper attaching nut | 113 ± 12 N.m (83 ± 9 ft-lb) |
| Transmission Fluid Cooler <4A/T> | |
| ATF warmer (transmission fluid cooler) bracket attaching bolt | 23 ± 3 N.m (17 ± 2 ft-lb) |
| ATF warmer (transmission fluid cooler) attaching bolt | 23 ± 3 N.m (17 ± 2 ft-lb) |
| Transmission Fluid Cooler <5A/T> | |
| Transmission fluid cooler attaching bolt | 12 ± 2 N.m (102 ± 22 in-lb) |
| Transmission fluid cooler bracket attaching bolt | 12 ± 2 N.m (102 ± 22 in-lb) |
| Transmission fluid cooler line tube attaching bolt | 12 ± 2 N.m (102 ± 22 in-lb) |