<< B >> Select Cable Disconnection (Transmission Side)/Gearshift Cable Disconnection (Transaxle Side)/Gearshift Link Clip Removal

CAUTION: Be careful not to pull out the cable directly to disconnect the joint because the cable could be broken.

Use the clip remover (special tool: MB992277), and disconnect the joint.

Fig 1: Identifying Special Tool MB992277
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Push up the claws of the gearshift link clip using a screwdriver, etc., and then remove the gearshift link clip from the bracket together with the cables.

Fig 2: Identifying Gearshift Link Clip And Claws
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.