>>B<< Spider Assembly/ETJ Case Installation
CAUTION:
- The driveshaft joint use special grease. Do not mix old and new or different types of grease.
- If the spider assembly has been cleaned, take special care to apply the specified grease.
- Apply the specified grease furnished in the repair kit to the spider assembly between the spider axle and the roller.
Specified grease: Repair kit grease
- Install the spider assembly to the shaft from the direction of the spline chamfered side.
- After applying the specified grease to the ETJ case, insert the driveshaft and apply grease one more time.
Specified grease: Repair kit grease
Amount to use: 120 ± 10 g (4.2 ± 0.3 ounce)
NOTE: When using the repair kit grease, fill the half of the grease into the joint and the other half into the boot as a guideline, and consume the grease completely.