Data List Reference Table
DATA LIST REFERENCE CHART
| Item No. | Display on scan tool | Item name | Check conditions | Normal conditions | |
|---|---|---|---|---|---|
| 1 | AWC control mode | AWC control mode | TARMAC is selected (displayed on multi information display). | TARMAC | |
| GRAVEL is selected (displayed on multi information display). | GRAVEL | ||||
| SNOW is selected (displayed on multi information display). | SNOW | ||||
| 2 | T/M gear position hold request | T/M shift range storing request flag | Perform a test run of the vehicle. | Retention requested | ON |
| Retention not requested | OFF | ||||
| 3 | System fail | System malfunction | Normal | Correct | |
| Faulty | Malfunction | ||||
| 4 | ACD target torque (for Meter) | ACD target torque (Meter display) | Perform a test run of the vehicle. | 0 - 5 seg | |
| 5 | Request Yaw moment (for Meter) | Requested yaw moment (Meter display) | Perform a test run of the vehicle. | -5 ~ 5 seg | |
| 6 | FL brake control indication | Brake control instruction <FL> | Perform a test run of the vehicle. | Not requested | Not requested |
| Brake pressure command | Brake pressure | ||||
| Slip ratio command | Slip ratio | ||||
| Brake pressure and slip ratio command | Brake pressure and slip ratio | ||||
| 7 | FR brake control indication | Brake control instruction <FR> | Perform a test run of the vehicle. | Not requested | Not requested |
| Brake pressure command | Brake pressure | ||||
| Slip ratio command | Slip ratio | ||||
| Brake pressure and slip ratio command | Brake pressure and slip ratio | ||||
| 8 | RL brake control indication | Brake control instruction <RL> | Perform a test run of the vehicle. | Not requested | Not requested |
| Brake pressure command | Brake pressure | ||||
| Slip ratio command | Slip ratio | ||||
| Brake pressure and slip ratio command | Brake pressure and slip ratio | ||||
| 9 | RR brake control indication | Brake control instruction <RR> | Perform a test run of the vehicle. | Not requested | Not requested |
| Brake pressure command | Brake pressure | ||||
| Slip ratio command | Slip ratio | ||||
| Brake pressure and slip ratio command | Brake pressure and slip ratio | ||||
| 10 | Rear ABS control request status | Rear ABS independent control request | Perform a test run of the vehicle. | Not requested | Not requested |
| Independent control | Independent control | ||||
| Select low | Select low | ||||
| Error | Malfunction | ||||
| 11 | Steering angle sensor | Steering wheel sensor | Steering wheel: Steered 90° to right | R90 deg | |
| Steering wheel: Steered 90° to left | L90 deg | ||||
| 12 | Steering angle speed | Steering wheel steering angle speed | Steering wheel: Without steering wheel operation | 0 deg/s | |
| Steering wheel: With steering wheel operation | Changes depending on the turning speed. | ||||
| 13 | Steering angle sensor (status) | Steering wheel sensor (status) | Normal | Correct | |
| Faulty | Malfunction | ||||
| Neutral point not learned | Neutral not learned | ||||
| Neutral point not learned or failed | Neutral not learned and Malfunction | ||||
| 14 | Accelerator position | Accelerator opening angle | Release the accelerator pedal | 18~22% | |
| Depress the accelerator pedal | Increases in response to the depression amount | ||||
| Accelerator pedal fully opened | 80% or more | ||||
| 15 | Engine speed | Engine speed | Idling and test run | Nearly the same as the tachometer display | |
| 16 | Engine torque (Driver request) | Engine torque (Driver request value) | Operate the accelerator pedal | The torque changes | |
| 17 | T/M Gear position <Vehicles with TC-SST> | T/M shift range | Shift lever position: P | P | |
| Shift lever position: R | R | ||||
| Shift lever position: Drive at D | D1 - D6 | ||||
| Shift lever position: Manual mode | M/T | ||||
| 18 | FL wheel speed (raw value) | Wheel speed sensor <FL> | - (reference because of RPM) | - | |
| 19 | FR wheel speed (raw value) | Wheel speed sensor <FR> | |||
| 20 | RL wheel speed (raw value) | Wheel speed sensor <RL> | |||
| 21 | RR wheel speed (raw value) | Wheel speed sensor <RR> | |||
| 22 | FL wheel speed sensor | Wheel speed sensor <FL> | Perform a test run of the vehicle. | Nearly the same as the speedometer display | |
| 23 | FR wheel speed sensor | Wheel speed sensor <FR> | |||
| 24 | RL wheel speed sensor | Wheel speed sensor <RL> | |||
| 25 | RR wheel speed sensor | Wheel speed sensor <RR> | |||
| 26 | Yaw rate sensor | Yaw rate sensor | Perform a test run of the vehicle. | -100 - 100 deg/s | |
| 27 | Yaw rate sensor (acceleration) | Yaw rate sensor (Angle acceleration) | Perform a test run of the vehicle. | The value changes depending on the yaw change speed. | |
| 28 | Yaw rate sensor (status) | Yaw rate sensor (Status) | Normal | Correct | |
| Faulty | Malfunction | ||||
| Self-diagnosis | Under testing | ||||
| System malfunction | System malfunction | ||||
| 29 | Lateral G sensor | Lateral G sensor | Vehicle is stopped (horizontal state). | -1.1 - 1.1 m/s2 | |
| Perform a test run of the vehicle. | -10 - 10 m/s2 | ||||
| 30 | Lateral G sensor (status) | Lateral G sensor (Status) | Normal | Correct | |
| Faulty | Malfunction | ||||
| Self-diagnosis | Under testing | ||||
| System malfunction | System malfunction | ||||
| 31 | Longitudinal G sensor | Longitudinal G sensor | Vehicle is stopped (horizontal state). | -1.1 - 1.1 m/s2 | |
| Perform a test run of the vehicle. | -10 - 10 m/s2 | ||||
| 32 | Longitudinal G sensor (status) | Longitudinal G sensor (Status) | Normal | Correct | |
| Faulty | Malfunction | ||||
| Self-diagnosis | Under testing | ||||
| System malfunction | System malfunction | ||||
| 38 | Master cylinder pressure sensor | Master cylinder pressure sensor | The brake pedal is depressed | Rises depending on the depression value. | |
| The brake pedal is released | -0.3~0.3 MPa | ||||
| 39 | Brake switch (CAN input) | Stoplight switch | Brake pedal: Depressed | ON | |
| Brake pedal: Released | OFF | ||||
| 40 | Parking brake SW (CAN input) | Parking brake switch | Parking brake lever: Pulled | ON | |
| Parking brake lever: Released | OFF | ||||
| 41 | Back up lamp SW (CAN input) | Back-up light switch | Shift lever: Operated to reverse (vehicles with SST only) | ON | |
| Shift lever: Other than above | OFF | ||||
| 42 | Ignition SW (CAN input) | Ignition switch | Ignition switch: ON | ON | |
| Ignition switch: START | START | ||||
| 43 | Battery voltage (CAN input) | Battery positive voltage | Ignition switch: ON | Battery positive voltage | |
| 44 | IOD fuse (CAN input) | IOD fuse | Fuse inserted | ON | |
| Fuse removed | OFF | ||||
| 45 | Odometer (CAN input) | Odometer | Ignition switch: ON | The same as the meter display | |
| 46 | ETACS coding status | ETACS coding status | Coding incomplete | Not complete | |
| Coding data requested | Data request | ||||
| Coding completed | Complete | ||||
| 47 | ECU connection (ABS) | ECU connection (ABS) | ASC-ECU connected | Present | |
| ASC-ECU disconnected | Not present | ||||
| 48 | ECU connection (ENGINE) | ECU connection (Engine) | Engine control module connected | Present | |
| Engine control module disconnected | Not present | ||||
| 49 | ECU connection (T/M) | ECU connection (T/M) | SST-ECU connected | Present | |
| SST-ECU disconnected | Not present | ||||
| 50 | ECU connection (SAS) | ECU connection (Steering wheel sensor) | Steering sensor connected | Present | |
| Steering sensor disconnected | Not present | ||||
| 51 | Coding status | T/M, R/D coding status | Coding incomplete | Not complete | |
| Coding completed | Complete | ||||
| 52 | T/M type (CAN input) | T/M type | 5M/T | 5M/T | |
| TC-SST | SST | ||||
| 53 | Rear diff type (CAN input) | Rear differential type | Mechanical differential | LOM | |
| AYC differential | AYC | ||||
| 54 | FL wheel ABS actuation flag | ABS activation flag <FL> | Operating | ON | |
| Inactive | OFF | ||||
| 55 | FR wheel ABS actuation flag | ABS activation flag <FR> | Operating | ON | |
| Inactive | OFF | ||||
| 56 | RL wheel ABS actuation flag | ABS activation flag <RL> | Operating | ON | |
| Inactive | OFF | ||||
| 57 | RR wheel ABS actuation flag | ABS activation flag <RR> | Operating | ON | |
| Inactive | OFF | ||||
| 58 | ABS fail flag | ABS fail flag | Faulty | ON | |
| Normal | OFF | ||||
| 61 | FL wheel ASC actuation flag | ASC activation flag <FL> | Operating | ON | |
| Inactive | OFF | ||||
| 62 | FR wheel ASC actuation flag | ASC activation flag <FR> | Operating | ON | |
| Inactive | OFF | ||||
| 63 | RL wheel ASC actuation flag | ASC activation flag <RL> | Operating | ON | |
| Inactive | OFF | ||||
| 64 | RR wheel ASC actuation flag | ASC activation flag <RR> | Operating | ON | |
| Inactive | OFF | ||||
| 65 | ASC fail flag | ASC fail flag | Faulty | ON | |
| Normal | OFF | ||||
| 66 | ASC switch mode | ASC OFF switch | When ASC is ON | ON | |
| When ASC is OFF | OFF | ||||
| When ASC is completely OFF | Completely OFF | ||||
| 67 | Brake control enable flag | Brake control permission flag | Prohibited | Prohibited | |
| Permitted | Permitted | ||||
| 69 | Yaw rate self test start req.flag | Yaw rate self test start request | Start requested | ON | |
| Start not requested | OFF | ||||
| 70 | G sensor self test start req.flag | Longitudinal/lateral G sensor self test start request | Start requested | ON | |
| Start not requested | OFF | ||||
| 71 | G sensor self test executing flag | Longitudinal/lateral G sensor during self test flag | Self-diagnosis | ON | |
| Normal condition | OFF | ||||
| 72 | Yaw rate self test executing flag | Yaw rate during self test flag | Self-diagnosis | ON | |
| Normal condition | OFF | ||||
| 73 | Sensor cluster initial check | G and yaw rate sensor initial check | Initial check uncompleted | Not complete | |
| Initial check completed | Complete | ||||
| 74 | Flame No reception flag | SYNC frame not received flag | Not received | ON | |
| Correct | OFF | ||||
| 75 | Sensor cluster low voltage flag | G and yaw rate sensor low voltage abnormality flag | Low voltage | ON | |
| Correct | OFF | ||||
| 76 | Sensor cluster high voltage flag | G and yaw rate sensor high voltage abnormality flag | High voltage | ON | |
| Correct | OFF | ||||
| 83 | IG1 | IG1 (ignition switch) | ON | ON | |
| OFF | OFF | ||||
| 84 | ECU power supply voltage | ECU power supply voltage | Ignition switch: ON | 10 - 16 V | |
| 85 | Output load voltage | Power supply voltage for output load | Ignition switch: ON | 10 - 16 V | |
| 86 | Pressure sensor power voltage | Pressure sensor power supply voltage | Ignition switch: ON | Approx. 5 V | |
| 87 | Pressure sensor output voltage | Pressure sensor output voltage | Immediately after electric pump motor operation | 1.86 - 2.67 V | |
| 88 | Pressure sensor | Pressure sensor | Immediately after electric pump motor operation | 1 - 1.6 MPa | |
| 89 | Mode SW | AWC switch <Vehicles with steering wheel audio remote control switch> | Mode selection switch: Pressed | ON | |
| Mode selection switch: Released | OFF | ||||
| 90 | Mode SW(steering) 1 | AWC switch (steering) 1 <Vehicles without steering wheel audio remote control switch> | Mode selection switch: Pressed to the upper side | ON | |
| Mode selection switch: Released | OFF | ||||
| 91 | Mode SW(steering) 2 | AWC switch (steering) 2 <Vehicles without steering wheel audio remote control switch> | Mode selection switch: Pressed to the down side | ON | |
| Mode selection switch: Released | OFF | ||||
| 92 | ACD proportion valve (indicated) | ACD proportioning valve indicator current | During ACD operation | 50 - 1,000 mA | |
| 93 | AYC proportion valve (indicated) | AYC proportioning valve indicator current | During AYC operation | 50 - 1,000 mA | |
| 94 | LH direction V drive indication | Left direction valve driving indicator flag | ON | ON | |
| OFF | OFF | ||||
| 95 | RH direction V drive indication | Right direction valve driving indicator flag | ON | ON | |
| OFF | OFF | ||||
| 96 | Motor relay drive indication | Motor relay driving indicator flag | ON | ON | |
| OFF | OFF | ||||
| 97 | Yaw rate sensor (adjusted value) | Yaw rate sensor (Correction amount) | Ignition switch: ON | -6 - 6 deg/s | |
| 98 | SAS (adjusted value) | Steering sensor (Correction amount) | Ignition switch: ON | -15 - 15 deg | |
| 99 | Lateral G sensor(adjusted value) | Lateral G sensor (Correction amount) | Ignition switch: ON | -1.7 - 1.7 m/s2 | |
| 100 | Longitudinal G (adjusted value) | Longitudinal G sensor (Correction amount) | Ignition switch: ON | -3 - 3 m/s2 | |
| 101 | Chassis Number writing counter | Chassis number writing count | Ignition switch: ON | Writing count | |
| 102 | Chassis Number (original) lock | Chassis number (original) lock | Ignition switch: ON | Locked | Lock |
| Unlocked | Unlock | ||||
| 103 | Mileage counter | Mileage counter | Ignition switch: ON | Counter value | |
| 104 | Coding counter | Coding count | Ignition switch: ON | Coding count | |