LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2011 >> Lancer Evolution GSR >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Manual Transaxle On-Vehicle Service - Lancer Evolution >> On-Vehicle Service >> Transmission Oil Level Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Oil Level Check

  1. Remove the engine room under cover front B assembly. (Refer to UNDER COVER .)
  2. Remove the filler plug and gasket.
  3. Check that the oil level is just below the lower edge of the filler plug hole.
  4. Check that the oil is not excessively foul and has moderate viscosity.
  5. Install the filler plug and new gasket, then tighten them to the specified torque.

    Tightening torque: 32 ± 2 N.m (24 ± 1 ft-lb) 

  6. Install the engine room under cover front B assembly. (Refer to UNDER COVER .)
    Fig 1: Identifying Oil Filler Plug And Oil Drain Plug
    G05392267Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Identifying Filler Plug Hole, Filler Plug And Gasket
    G06672032Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.