Front Seatback Assembly With Side-Air Bag Module Check

WARNING: Never attempt to measure the circuit resistance of the air bag module (squib), even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental air bag deployment will result, and possible serious personal injury.

WARNING: If any improper part is found during the following inspection, replace the front seatback assembly with a new one. Dispose of the old one according to the specified procedure (Refer to UNDEPLOYED AIR BAG MODULE DISPOSAL ).

Check the air bag module deployment section for dents or deformation.
Check the connector for damage, the terminals for deformation, and the harness for binding.

Fig 1: Identifying Side Airbag Module Deployment Section
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.