LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2012 >> Eclipse GS, Standard Trans >> Repair and Diagnosis (Single Page) >> Transmission >> Manual Trans >> Manual Transaxle Overhaul >> Transaxle >> Disassembly And Assembly >> Assembly Service Points >> >>I<< Vehicle Speed Sensor Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>I<< Vehicle Speed Sensor Installation

  1. Apply gear oil (Hypoid gear oil SAE 75W-90 or 75W-85W conforming to API classification GL-4) to the O-ring of the vehicle speed sensor. Install into the transaxle housing.
  2. Tighten the bolt to specified torque.

    Tightening torque: 3.9 ± 1.0 N.m (35 ± 9 in-lb) 

    Fig 1: Applying Gear Oil To O-Ring Of Vehicle Speed Sensor
    G06684561Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals