Repair and Diagnosis (Single Page)

You are viewing the full "tree" of links on one page. This can load slowly, but is easier to search. The same page can appear multiple times under a different folder, that is why the page is so large.
View "split tree" where inner folders are split out. where inner links are on separate pages.

Expand All (for easy ctrl-f) Collapse All

• Quick Lookups
  • Common Specs & Procedures
    • Common Specs & Procedures
  • DTC Index
    • Automatic Air Conditioning DTCS
    • Automatic Transaxle System DTCS
    • Combination Meter DTCS
    • Heating, Air Conditioning And Ventilation DTCS
    • Immobilizer System DTCS
    • MULTIPORT Fuel Injection (MFI) DTCS
      • 2.4L
      • 3.8L
    • Simplified Wiring System (SWS) DTCS
    • Supplemental Restraint System (SRS) DTCS
    • Traction Control/Active Stability Control System DTCS
      • Abs/TCL/ASC-Ecu
      • Steering Wheel Sensor
    • Tire Pressure Monitoring System (TPMS) DTCS
  • Electrical Component Locations
    • OEM Component Locations
      • Fusible Link, Fuse And IOD Or Storage Connector
      • Grounding Cable
      • Grounding
      • Inspection Terminal
      • Other Devices
      • Sensor
      • Control Unit
      • Solenoid And Solenoid Valve
      • Relay
  • Fluids
  • Technical Bulletins
    • Tech Tips
    • Technical Service Bulletins
  • Tire Fitment
  • Wiring Diagrams
    • Connector End Views - 2.4L
      • Connector End Views
        • Interlock Switch Connector End View (C-101)
        • Convertible Top Control Module Connector End View (D-45)
        • SRS-ECU Connector End View (C-122)
        • Clockspring Connector End View (C-302, C-303, C-306)
        • Intermediate Connector (D-30) And Rear Dome Light Connector End View (D-06)
        • Blower Motor Connector End View (C-116)
        • Door Switch (RH) Connector End View (D-01) (Eclipse Spyder)
        • Door Lock Actuator (RH) Connector End View (E-05)
        • Power Window Sub Switch Connector End View (E-06)
        • AUX Adapter (C-139) And AUX Box Connector End View (C-138)
        • Passenger's Air Bag Module Connector End View (C-112)
        • Solenoid Valve (Tonneau Drive Cylinder) Connector End View (F-25)
        • Fuel Level Sensor Connector End View (D-10) (Eclipse)
        • Torque Converter Clutch Solenoid Valve Connector End View (B-111-4)
        • Intermediate Connector (C-21) Connector End View
        • Ignition Switch Connector End View (C-308)
        • Heated Seat Switch Connector End View
        • Heater Air Intake Duct Sensor Connector End View (C-105)
        • Rear Window Defogger Relay Connector End View
        • Radio Switch (LH) (C-311) And Clock Spring (C-303) Connector End View
        • PCM Connector End View
        • Remote Controlled Mirror (LH) Connector End View (E-12)
        • Joint Connector (C-01) Connector End View
        • Key Reminder Switch Connector End View (C-310)
        • Interphone Microphone Connector End View (D-51) (Eclipse)
        • Intermediate Connector (C-29) Connector End View
        • Front Dome Light Connector End View (D-03 And D-04)
        • Power Window Motor Connector End View (E-03)
        • Side-Airbag Module (LH) Connector End View (D-23)
        • Windshield Washer Motor Connector End View (A-33)
        • Clutch Pedal Position Switch Connector End View (C-129)
        • Front Impact Sensor (LH) Connector End View (A-21)
        • Injector Connector End View (B-01, B-03, B-26 And B-29)
        • Front Combination Light (LH) Connector End View (A-17)
        • Microphone Switch Connector End View
        • Knock Sensor Connector End View (B-126)
        • Power Window Motor (LH) Connector End View (E-16)
        • Side-Marker Light (LH) Connector End View (A-39)
        • Power Window Motor Connector End View (D-37)
        • Intermediate Connector (C-26) Connector End View
        • Headlight (LH) Connector End View (A-18)
        • Junction Block Connector (C-202 And C-209) Connector End View
        • Engine Oil Pressure Switch Connector End View (B-33)
        • Condenser Fan Motor Connector End View (A-29)
        • Horn Relay Connector End View (A-08X)
        • Ambient Air Temperature Sensor Connector End View (A-27)
        • Front Dome Light Connector End View (D-50)
        • Blower Switch Connector End View
        • Rear Height, Front Height And Slide Motor Connector End View
        • Rear Combination Light (LH) Connector End View (F-14) (Eclipse)
        • ASC OFF Switch Connector End View (C-133)
        • Radiator Fan Relay Connector End View
        • Door Speaker (LH) Connector End View (E-13)
        • Door Lock Actuator (LH) Connector End View (E-11)
        • Passenger Seat Belt Warning Light Connector End View (C-07)
        • A/T Control Relay Connector End View (B-15X)
        • Tweeter (LH) Connector End View (C-130)
        • Security Indicator Connector End View (C-02)
        • TCL/ASC-ECU Connector End View (A-02, A-03, A-38)
        • Front-ECU Connector End View (A-14X)
        • Luggage Compartment Light Connector End View (D-09)
        • A/C Pressure Sensor Connector End View (A-34)
        • Intermediate Connector (C-27) Connector End View
        • Steering Wheel Sensor Connector End View (C-312)
        • Junction Block Connector End View (C-202 And C-216)
        • Trunk Lid Latch Switch Connector End View (F-09)
        • Front Wheel Speed Sensor (LH) Connector End View (A-06)
        • Interphone Microphone Connector End View (D-51) (Eclipse Spyder)
        • Front Turn-Signal Light (LH) Connector End View (A-40)
        • Backup Light Switch Connector End View (B-114)
        • Quarter Window Regulator Motor Connector End View
        • Intermediate Connector (C-25) Connector End View
        • Potentiometer Connector End View (C-104)
        • TPMS Receiver Connector End View (C-121)
        • Tonneau Sensor Connector End View
        • Outside/Inside Air Selection Damper Control Motor Connector End View (C-108)
        • Side Impact Sensor (RH) Connector End View (D-33)
        • Clock Spring Side Air Bag Module Connector End View (C-305)
        • Inside Rear View Mirror Assembly Connector End View (D-49) (Eclipse)
        • Door Switch (LH) Connector End View (D-15) (Eclipse Spyder)
        • SRS-ECU Connector End View (C-122, C-123, C-124)
        • License Plate Light Connector End View (F-10) (Eclipse)
        • Front Fog Light Switch (C-127) Or Front Fog Light ASC Off Switch Connector End View (C-136)
        • Convertible Top Control Module Connector End View (F-27)
        • ETACS-ECU Connector End View (C-217, C-218, C-219)
        • Sunroof Switch Connector End View (D-32)
        • Rear Combination Light (RH) Connector End View (F-07) (Eclipse)
        • Fuel Tank Differential Pressure Sensor Connector End View (D-18)
        • Remote Controlled Mirror (RH) Connector End View (E-01)
        • Convertible Top Control Module Connector End View (F-26)
        • Starter Relay Connector End View (B-11X)
        • Underdrive Solenoid Valve Connector End View (B-111-1)
        • Joint Connector (C-03) Connector End View
        • Radiator Fan Motor Connector End View
        • Fuel Level Sensor (Main) Connector End View (D-19)
        • Woofer Connector End View (D-12) (Eclipse Spyder)
        • Door Switch (RH) Connector End View (D-01) (Eclipse)
        • Cylinder (1, 4) Heated Oxygen Sensor (Front) Connector End View (B-36)
        • Solenoid Valve Connector End View (F-18)
        • Rear Window Defogger Connector End View (F-04) (Eclipse)
        • Rear Window Defogger Connector End View (F-04) (Eclipse Spyder)
        • 5-Bow Sensor Connector End View (F-16)
        • Front-ECU Connector End View (A-13X)
        • Hazard Warning Light Switch Connector End View (C-08)
        • Brake Fluid Level Switch Connector End View (A-04)
        • Joint Connector (C-28) Connector End View
        • Air Thermo Sensor Connector End View (C-102)
        • Headlight Assembly (RH) Connector End View (A-42)
        • Intermediate Connector (C-11) Connector End View
        • (Cylinder 1, 4) Heated Oxygen Sensor (Rear) Connector End View (B-37)
        • Radio And CD Player Connector End View (C-117)
        • Evaporative Emission Ventilation Solenoid Connector End View (F-13)
        • Windshield Wiper Motor Connector End View (A-05)
        • Blower Switch Connector End View (C-116 And C-106)
        • Evaporative Emission Purge Solenoid Connector End View (B-05)
        • Column Switch Connector End View (C-309)
        • Convertible Top Control Module Connector End View (F-22, F-26 And F-27)
        • Fan Control Relay Connector End View (A-12X)
        • Quarter Speaker (RH) Connector End View (D-05) (Eclipse Spyder)
        • Headlight Assembly (LH) Connector End View (A-41)
        • Camshaft Position Sensor Connector End View (B-110)
        • Satellite Radio Tuner Connector End View (D-48) (Eclipse)
        • Engine Coolant Temperature Sensor Connector End View (B-106)
        • Front Fog Light Relay Connector End View (A-07X)
        • SRS-ECU Connector End View (C-123)
        • Ambient Air Temperature Sensor Connector End View (A-28)
        • Quarter Speaker (LH) Connector End View (D-14) (Eclipse Spyder)
        • Passenger's Seat Belt Pre-Tensioner Connector End View (D-34)
        • Parking And Side-Marker Light (RH) Connector End View (A-44)
        • License Plate Light Connector End View (F-10) (Eclipse Spyder)
        • Door Speaker (RH) Connector End View (E-07)
        • Amplifier (C-114 & C-115), CD Changer (C-117 & C-119) And CD Player Connector End View (C-118)
        • Rear Wheel Speed Sensor RH Connector End View (F-08) (Eclipse)
        • Fuel Level Sensor Connector End View (D-10) (Eclipse Spyder)
        • Windshield Wiper And Windshield Washer Switch Connector End View
        • Power Window Switch Connector End View
        • Shift Switch Assembly Connector End View (C-17)
        • Rear Wheel Speed Sensor RH Connector End View (F-08) (Eclipse Spyder)
        • Curtain Air Bag Module (RH) Connector End View (D-08)
        • Horn (Low) Connector End View (A-23)
        • (Cylinder 2, 3) Heated Oxygen Sensor (Rear) Connector End View (B-34)
        • Rear Wheel Speed Sensor LH Connector End View (F-12) (Eclipse Spyder)
        • Curtain Air Bag Module (Squib) (LH) Connector End View (D-11)
        • Crankshaft Position Sensor Connector End View (B-125)
        • Passenger Air Bag Off Indicator Light Connector End View (C-05)
        • (Cylinder 2, 3) Heated Oxygen Sensor (Front) Connector End View (B-35)
        • Windshield Washer Motor Connector End View
        • Convertible Top Switch Connector End View (C-30)
        • Liftgate Switch Connector End View
        • Clock Spring (C-303) And Remote Controlled Radio Switch (RH) Connector End View (C-301)
        • A/C-ECU Connector End View (C-20)
        • A/C Compressor Clutch Relay Connector End View (B-17X)
        • ETACS-ECU Connector End View (C-219)
        • G And Yaw Rate Sensor Connector End View (C-32)
        • Accelerator Pedal Position Sensor Connector End View (C-22)
        • Front Impact Sensor (RH) Connector End View (A-30)
        • Hood Switch Connector End View (A-37)
        • Short Stroke Switch (LH) Connector End View (E-18)
        • Fuel Pump Module Connector End View (D-19) (Eclipse)
        • Sunroof-ECU Connector End View (D-35)
        • Front-ECU Connector End View (A-13X, A-14X)
        • Door Switch Connector End View
        • Windshield And Rear Washer Motor Connector End View (A-32)
        • Side-Airbag Module (RH) Connector End View (D-28)
        • Hands Free Module Connector End View (C-35)
        • Multi-Center Display Unit Connector End View (C-06)
        • Rear Combination Light (LH) Connector End View (F-14) (Eclipse Spyder)
        • Reduction Solenoid Valve Connector End View (B-111-6)
        • TCL Switch Connector End View
        • Front Fog Light (RH) Connector End View (A-31)
        • Ignition Coil Connector End View (B-101, B-102, B-121 Or B-122)
        • Remote Controlled Radio Switch Connector End View
        • Combination Meter Connector End View (C-101)
        • Manifold Absolute Pressure Sensor Connector End View (B-02)
        • A/C-ECU Connector End View (C-14)
        • Rear Window Defogger Connector End View (F-01) (Eclipse)
        • Intermediate Connector (A-15) Connector End View
        • Front Seat Belt Retractor Connector End View (D-17)
        • A/C-ECU Connector End View (C-15, C-20)
        • CD Changer Connector End View (C-119)
        • Door Switch (LH) Connector End View (D-15) (Eclipse)
        • Clock Spring Connector End View (C-307 And C-305)
        • Short Stroke Switch (RH) Connector End View (E-17)
        • Convertible Top Control Module Connector End View (D-46)
        • Inside Rear View Mirror Assembly Connector End View (D-49) (Eclipse Spyder)
        • Headlight Leveling Switch Connector End View
        • Power Transistor Connector End View (C-107)
        • Potentiometer Connector End View (C-109)
        • Liftgate Lock Release Handle Connector End View (F-06)
        • TPMS Receiver Connector End View (C-211)
        • A/T Control Solenoid Valve Connector End View
        • Power Window Main Switch Connector End View (E-14)
        • Engine Oil Control Valve Connector End View (B-32)
        • Rear View Camera Connector End View (F-34) (Eclipse)
        • Intermediate Connector (C-09) Connector End View
        • ECM (M/T) Or PCM (A/T) Connector End View (B-22)
        • Parking Brake Switch Connector End View (C-16)
        • MFI Relay Connector End View (B-16X)
        • Tweeter (RH) (C-110) And Radio And CD Player Connector End View (C-117)
        • Power Window Relay Connector End View (C-207)
        • Rear Wiper Motor Connector End View (F-03)
        • Wheel Speed Sensor Connector End View
        • Fuel Pump Module Connector End View (D-19) (Eclipse Spyder)
        • Variable Intermittent Wiper Control Switch Connector End View
        • Transmission Range Switch Connector End View
        • Intermediate Connector (C-09) And Audio Amplifier Connector End View (C-114)
        • Junction Block Connector (C-208) Connector End View
        • Rear Window Defogger Relay Connector End View (C-205)
        • Remote Controlled Radio Switch Connector End View (RH)
        • Rear Combination Light (RH) Connector End View (F-07) (Eclipse Spyder)
        • Overdrive Solenoid Valve Connector End View (B-111-3)
        • Convertible Top Control Module (D-45) And Tonneau Sensor Connector End View (D-39)
        • Sunroof Motor Assembly Connector End View (D-35)
        • Intermediate Connector (C-24) Connector End View
        • Liftgate Lock Actuator Connector End View (F-11)
        • Front Fog Light (LH) Connector End View (A-24)
        • Intermediate Connector (C-10) Connector End View
        • Occupant Classification ECU Connector End View (D-26)
        • A/C-ECU Connector End View (C-15)
        • Fuel Pump Relay (1) Connector End View (C-214)
        • ETACS-ECU Connector End View (C-218)
        • Rear Wheel Speed Sensor LH Connector End View (F-12) (Eclipse)
        • PCM Connector End View (B-19)
        • Auto-Cruise Control Switch Connector End View (C-302)
        • ECM Connector End View (B-21)
        • Power Window Sub Switch Connector End View (E-08)
        • Rear View Camera Connector End View (F-34) (Eclipse Spyder)
        • Throttle Actuator Control Motor Relay Connector End View (B-13X)
        • Quarter Speaker (RH) Connector End View (D-05) (Eclipse)
        • Inside Rear View Mirror Assembly Connector End View (D-04)
        • Throttle Actuator Control Motor Connector End View (B-06)
        • Fuel Pump Relay (2) Connector End View (C-212)
        • Blower Switch Connector End View (C-12)
        • Stoplight Switch Connector End View (C-103)
        • EGR Valve Connector End View (B-105)
        • Seat Slide Sensor Connector End View (D-24)
        • Condenser Fan Relay Connector End View (A-19X)
        • Tweeter (LH) Connector End View (C-131)
        • 5-Bow Sensor (F-16 & F-22) And Convertible Top Control Module Connector End View (F-27)
        • Convertible Top Relay Connector End View (D-44)
        • Power Seat Switch Connector End View
        • Intake Air Temperature Sensor Connector End View
        • A/C-ECU Connector End View (C-19)
        • Combination Meter Connector End View (C-04)
        • Horn (High) Connector End View (A-25)
        • Input Shaft Speed Sensor Connector End View (B-112)
        • Satellite Radio Tuner Connector End View (D-48) (Eclipse Spyder)
        • ECM And PCM Connector End View
        • Power Steering Pressure Switch Connector End View (B-30)
        • 5-Bow Sensor Connector End View (F-22)
        • Mass Airflow Sensor Connector End View (B-09)
        • ECM Or PCM Connector End View (B-20)
        • Backup Light Switch Connector End View
        • Second Solenoid Valve Connector End View (B-111-2)
        • Blower Relay Connector End View
        • Convertible Top Motor Connector End View (D-41)
        • TPMS Receiver Connector End View (C-133)
        • Low-Reverse Solenoid Valve Connector End View (B-111-5)
        • Headlight (RH) Connector End View (A-35)
        • ECM Connector End View (B-18)
        • Clock Spring Connector End View (D-306)
        • Data Link Connector End View (C-125)
        • Junction Block Connector (C-203) Connector End View
        • Rear Window Defogger Connector End View (F-01) (Eclipse Spyder)
        • Intermediate Connector (C-23) Connector End View
        • Front Turn-Signal Light (RH) Connector End View (A-43)
        • SRS-ECU Connector End View
        • Junction Block Connector (C-215) Connector End View
        • Convertible Top Position Switch Connector End View (F-29)
        • ETACS-ECU Connector End View (C-217)
        • Output Shaft Speed Sensor Connector End View (B-108)
        • Quarter Speaker (LH) Connector End View (D-14) (Eclipse)
        • A/C-ECU Connector End View (C-14 Or C-15)
        • Control Solenoid Valve Assembly Connector End View (B-111)
        • Front Combination Light (RH) Connector End View (A-36)
        • Transmission Range Switch Connector End View (B-113)
        • Vehicle Speed Sensor Connector End View (B-104)
        • Hands Free Module Connector End View (C-34)
        • SRS-ECU Connector End View (C-124)
        • Liftgate Lock Release Handle Connector End View
        • Front Wheel Speed Sensor RH Connector End View (A-01)
        • Lighting Switch And Windshield Wiper Switch Connector End View
        • Seat Belt Switch (Driver's Side) Connector End View (D-22)
        • Tonneau Latch Switch Connector End View (F-28)
        • Woofer Connector End View (D-12) (Eclipse)
        • Fan Control Module Connector End View (A-22)
        • Door Mirror Control Switch Connector End View
        • Passenger's Seat Belt Switch Connector End View (D-25)
        • Generator Connector End View (B-120)
        • Driver Seat Belt Pre-Tensioner Connector End View (D-16)
        • 5-Bow Sensor (UP) Connector End View (F-23)
        • Tweeter (RH) (C-111) And CD Changer Connector End View (C-117)
    • OEM Circuit Diagrams
      • How To Read Circuit Diagrams
        • Notes
        • Connector/Grounding Indications
        • Symbols (Except Connector And Grounding)
        • Wire Color Codes
      • Junction Block
      • Joint Connector
      • Centralized Junction
        • Fusible Link And Fuse
        • Centralized Relay
      • Power Distribution System <Eclipse (Vehicles With Halogen Type Headlight)>
      • Power Distribution System <Eclipse (Vehicles With Discharge Type Headlight)>
      • Power Distribution System <Eclipse SPYDER (Vehicles With Halogen Type Headlight)>
      • Power Distribution System <Eclipse SPYDER (Vehicles With Discharge Type Headlight)>
      • Starting System <M/T>
      • Starting System <A/T>
      • Ignition System <2.4L Engine>
      • Ignition System <3.8L Engine>
      • Charging System
      • MULTIPORT Fuel Injection (MFI) System <2.4L Engine-M/T>
      • MULTIPORT Fuel Injection (MFI) System <2.4L Engine-A/T>
      • MULTIPORT Fuel Injection (MFI) System <3.8L Engine-M/T>
      • MULTIPORT Fuel Injection (MFI) System <3.8L Engine-A/T>
      • Cooling System <2.4L Engine>
      • Cooling System <3.8L Engine>
      • INVECS-II 4A/T <2.4L Engine (Vehicles With Halogen Type Headlight)>
      • INVECS-II 4A/T <2.4L Engine (Vehicles With Discharge Type Headlight)>
      • INVECS-II 5A/T <3.8L Engine>
      • Headlight <Halogen Type>
      • Headlight <Discharge Type>
      • Headlight Leveling System
      • Taillight, Position Light And License Plate Light <Vehicles With Halogen Type Headlight>
      • Taillight, Position Light And License Plate Light <Vehicles With Discharge Type Headlight>
      • Fog Light <Vehicles With Halogen Type Headlight>
      • Fog Light <Vehicles With Discharge Type Headlight>
      • Front Dome Light, Rear Dome Light, Luggage Compartment Light And Ignition Key Hole Illumination Light <Eclipse>
      • Front Dome Light And Ignition Key Hole Illumination Light <Eclipse SPYDER>
      • Glove Box Light
      • Vanity Mirror Light
      • Turn-Signal Light And Hazard Warning Light <Vehicles With Halogen Type Headlight>
      • Turn-Signal Light And Hazard Warning Light <Vehicles With Discharge Type Headlight>
      • Backup Light <M/T>
      • Backup Light <A/T>
      • Stoplight
      • Horn
      • Meter And Gauge <M/T (Vehicles With Halogen Type Headlight)>
      • Meter And Gauge <M/T (Vehicles With Discharge Type Headlight)>
      • Meter And Gauge <A/T (Vehicles With Halogen Type Headlight)>
      • Meter And Gauge <A/T (Vehicles With Discharge Type Headlight)>
      • Brake Warning Light, Oil Pressure Warning Light, Fuel Warning Light
      • Power Windows <Eclipse>
      • Power Windows <Eclipse SPYDER>
      • Central Door Locking System <Eclipse>
      • Central Door Locking System <Eclipse SPYDER>
      • Manual Air Conditioning System <2.4L Engine (Vehicles With Halogen Type Headlight)>
      • Manual Air Conditioning System <2.4L Engine (Vehicles With Discharge Type Headlight)>
      • Automatic Air Conditioning System <3.8L Engine>
      • Windshield Wiper And Washer <Eclipse-M/T>
      • Windshield Wiper And Washer <Eclipse-A/T>
      • Windshield Wiper And Washer <Eclipse SPYDER-M/T>
      • Windshield Wiper And Washer <Eclipse SPYDER-A/T>
      • Rear Wiper And Washer <M/T>
      • Rear Wiper And Washer <A/T>
      • Rear Window Defogger And Door Mirror Heater <Eclipse (Vehicles With Halogen Type Headlight)>
      • Rear Window Defogger And Door Mirror Heater <Eclipse (Vehicles With Discharge Type Headlight)>
      • Rear Window Defogger And Door Mirror Heater <Eclipse SPYDER (Vehicles With Halogen Type Headlight)>
      • Rear Window Defogger And Door Mirror Heater <Eclipse SPYDER (Vehicles With Discharge Type Headlight)>
      • Remote Controlled Mirror
      • Automatic Anti-Dazzling Mirror
      • Audio System <Vehicles Without Audio Amplifier>
      • Audio System <Vehicles With Audio Amplifier (Eclipse)>
      • Audio System <Vehicles With Audio Amplifier (Eclipse SPYDER)>
      • Accessory Socket
      • Multi-Center Display
      • Sunroof
      • Auto-Cruise Control System <2.4L Engine-M/T>
      • Auto-Cruise Control System <2.4L Engine-A/T>
      • Auto-Cruise Control System <3.8L Engine-M/T>
      • Auto-Cruise Control System <3.8L Engine-A/T>
      • Electronic Brake-Force Distribution (EBD), Anti-Lock Braking System (Abs) And Active Stability Control System (ASC) <Vehicles With Halogen Type Headlight>
      • Electronic Brake-Force Distribution (EBD), Anti-Lock Braking System (Abs) And Active Stability Control System (ASC) <Vehicles With Discharge Type Headlight>
      • Engine Immobilizer System <2.4L Engine-M/T>
      • Engine Immobilizer System <2.4L Engine-A/T>
      • Engine Immobilizer System <3.8L Engine-M/T>
      • Engine Immobilizer System <3.8L Engine-A/T>
      • Supplemental Restraint System (SRS) <Vehicles With Halogen Type Headlight>
      • Supplemental Restraint System (SRS) <Vehicles With Discharge Type Headlight>
      • Power Seat
      • Heated Seat <Vehicles With Halogen Type Headlight>
      • Heated Seat <Vehicles With Discharge Type Headlight>
      • Theft-Alarm System
      • Tire Pressure Monitoring System (TPMS)
      • Hands-Free Cellular Phone System
      • Rear View Camera
      • Forgotten Key Prevention Function
      • Lighting Monitor Tone Alarm
      • Ignition Key Reminder Tone Alarm
      • Seat Belt Warning Tone Alarm
      • Door Ajar Warning Tone Alarm <M/T>
      • Door Ajar Warning Tone Alarm <A/T>
      • Spare Connector (For Remote Controlled Engine Starter) <A/T>
      • Controller Area Network (Can) <2.4L Engine-M/T>
      • Controller Area Network (Can) <2.4L Engine-A/T>
      • Controller Area Network (Can) <3.8L Engine-M/T>
      • Controller Area Network (Can) <3.8L Engine-A/T>
      • Convertible Top
    • System Wiring Diagrams
      • Using lemon2025'S Wiring Diagrams
      • Air Conditioning
      • Anti-Lock Brakes
      • Anti-Theft
      • Body Control Modules
      • Computer Data Lines
      • Cooling Fan
      • Cruise Control
      • Defoggers
      • Engine Performance
        • 2.4L
        • 3.8L
      • Exterior Lights
      • Ground Distribution
      • Headlights
      • Horn
      • Instrument Cluster
      • Interior Lights
      • Navigation
      • Power Distribution
      • Power Door Locks
      • Power Mirrors
      • Power Seats
      • Power Top/Sunroof
      • Power Windows
      • Radio
      • Starting/Charging
      • Supplemental Restraints
      • Transmission
      • Trunk, Tailgate, Fuel Door
      • Warning Systems
      • Wiper/Washer
    • Using lemon2025'S System Wiring Diagrams
      • Introduction
      • Wiring Diagram Features And Controls
      • Wiring Diagram Color Abbreviations
      • Wiring Diagram Symbols
      • Wiring Diagram Ground Number Locations
      • Wiring Diagram Component Locations
• Accessories & Equipment
  • Accessories Control Systems
    • Accessory Socket
      • Removal And Installation
  • Anti-Theft Systems
    • Door System
      • General Description
        • Operation
          • Central Door Locking System
          • Power Windows
          • Short Stroke Mechanism
      • Central Door Locking System Diagnosis
      • Power Window Diagnosis
        • Introduction To Power Window Diagnosis
          • Notes
          • Short Stroke Mechanism
        • Power Window Diagnostic Troubleshooting Strategy
        • Trouble Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Short Stroke Mechanism does not Work.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 2: Short Stroke Mechanism does not Work.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
      • Door Diagnosis
        • Introduction To Glass And Door Diagnosis
      • Glass And Door Diagnostic Troubleshooting Strategy
        • Notes
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Water Leak Through Door Window Glass
            • Diagnosis
          • INSPECTION PROCEDURE 2: Door Window Glass Malfunction
            • Diagnosis
          • INSPECTION PROCEDURE 3: Water Leak Through Door Edge
            • Diagnosis
          • INSPECTION PROCEDURE 4: Water Leak from Door Center
            • Diagnosis
          • INSPECTION PROCEDURE 5: Door Hard to Open
            • Diagnosis
          • INSPECTION PROCEDURE 6: Door does not Open or Close Completely
            • Diagnosis
          • INSPECTION PROCEDURE 7: Uneven Gap Between Body
            • Diagnosis
          • INSPECTION PROCEDURE 8: Wind Noise Around Door
            • Diagnosis
        • How To Locate Wind Noise
      • Special Tools
      • On-Vehicle Service
        • Front Door Fit Adjustment
        • Door Window Glass Adjustment <Eclipse>
        • Door Window Glass Adjustment <Eclipse SPYDER>
        • Power Window Timer Function Check
        • Power Window Operating Current Check
        • Power Window Relay Check
        • Power Window Check
        • Short Stroke Mechanism Fully Closed Position Learning Procedure
        • Central Door Locking System Inspection
        • Forgotten Key Prevention Function Check
        • Door Outside Handle Play Check
        • Door Inside Handle Play Check
          • Door Inside Handle Knob Play Check
          • Door Inside Handle Lock Knob Stroke Check
      • Door Assembly
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Striker Installation
        • Inspection
          • Door Switch Check
      • Door Glass And Regulator
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Door Window Glass Mounting Bolt Removal
          • Installation Service Points
            • >>A<< Door Window Glass Mounting Bolt Installation
            • >>B<< Door Window Module Assembly Installation
        • Inspection
          • Power Window Switch Continuity Check
          • Main Switch
          • Sub Switch
      • Door Handle And Latch
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Door Check Installation
        • Door Lock Cylinder Disassembly And Assembly
          • Notes
          • Assembly Service Points
            • >>A<< Tumbler Assembly
            • >>B<< Cylinder Sub-Assembly Assembly
            • >>C<< Cap Assembly
        • Inspection
          • Front Door Latch Check
          • Central Door Lock Switch Continuity Check
          • Short Stroke Switch Continuity Check
      • Window Glass RUNCHANNEL And Door Opening Weatherstrip
        • Removal And Installation
          • Notes
          • Installation Service Points
            • >>A<< Door Window Weatherstrip Holder Installation
            • >>B<< Door Drip Weatherstrip Installation
            • >>C<< Door Opening Weatherstrip Outer Installation
    • Immobilizer System
      • General Description
        • Notes
        • Construction Diagram
        • Operation
      • Encrypted Code Registration Criteria Table
      • Immobilizer System Diagnosis
        • Introduction To Immobilizer System Diagnosis
        • Immobilizer System Diagnostic Troubleshooting Strategy
        • Diagnosis Function
          • How To Connect Scan Tool (M.U.T.-III)
          • How To Read And Erase Diagnostic Trouble Codes
          • How To Read Data List
        • Diagnostic Trouble Code Chart
      • Diagnostic Trouble Code Procedures
        • DTC B1702: Reception Error of Transponder Data
          • Notes
          • Circuit Operation
          • DTC Set Condition
          • Troubleshooting Hints
          • Diagnosis
        • DTC B1703: Transponder Data Inconsistent
          • DTC Set Condition
          • Troubleshooting Hints
          • Diagnosis
        • DTC B1731: Immobilizer Communication Failure
          • DTC Set Condition
          • Technical Description (Comment)
          • Troubleshooting Hints
            • Notes
            • Diagnosis
        • DTC B1761: VIN Not Registered
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • Symptom Chart
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: The Ignition Key cannot be Registered
          • Technical Description (Comment)
          • Troubleshooting Hints
        • INSPECTION PROCEDURE 2: Engine Cranks, but does not Start
          • Technical Description
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 3: The Immobilizer Indicator Light does not Illuminate
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • Data List Reference Table
        • Check At ETACS-Ecu (Immobilizer-Ecu) Terminal
      • Special Tools
      • On-Vehicle Service
        • Encrypted Code Registration Procedure
          • Notes
          • Precautions During Service
          • Encrypted Code Registration Using Ignition Key <Registration Using Scan Tool MB991958 (M.U.T.-III Sub Assembly)>
          • Encrypted Code Registration Using Ignition Key <Registration Using Ignition Key Only>
          • Encrypted Code Registration Using Barcode No
      • Key Ring Antenna
        • Removal And Installation
        • Inspection
          • Key Reminder Switch Check
      • ETACS-Ecu
        • Removal And Installation
    • Keyless Entry System
      • General Description
      • Keyless Entry System Diagnosis
      • Special Tool
      • On-Vehicle Service
        • Keyless Entry System Inspection
        • Keyless Entry System Timer Lock Function Inspection
        • Enabling/Disabling The ANSWERBACK Function
          • Notes
          • Enabling/Disabling The Hazard ANSWERBACK Function
            • How To Adjust Hazard ANSWERBACK When The Transmitter Is Used To Lock Doors
            • How To Adjust Hazard ANSWERBACK When The Transmitter Is Used To Unlock Doors
            • Enabling/Disabling The Horn ANSWERBACK Function
        • How To Register Secret Code
          • Notes
          • When Special Tool MB991824 (V.C.I.) Is Used
      • Transmitter
        • Disassembly And Assembly
          • Notes
          • Disassembly Service Points
            • <<A>> Upper Cover Removal
            • <<B>> Battery Removal
          • Assembly Service Point
            • >>A<< Battery Installation
        • Inspection
          • Transmitter Battery Check
    • Theft Alarm System
      • Theft-Alarm System Diagnosis
      • Removal And Installation
        • Theft-alarm system component parts
        • Panic alarm system component parts
      • Inspection
        • Theft-Alarm Indicator Light Check
  • Collision/Avoidance
    • Rear View Camera
      • General Description
        • Notes
        • Operation
      • Special Tool
      • Trouble Symptom Chart
      • Symptom Procedures
        • Rear View Camera Image Is not Correctly Displayed
          • Notes
          • Comments On Trouble Symptom
          • Probable Causes
          • Diagnostic Procedure
      • Removal And Installation
  • Communication Devices
    • Controller Area Network (Can)
      • General Description
        • Notes
        • Structure
      • Special Tools
      • Test Equipment
      • Service Precautions
      • Precautions On How To Repair The Can Bus Lines
        • Precautions On How To Repair The Can Bus Lines
        • Precautions On How To Repair The Terminator Resistor
        • Can Bus Line Repair Harness (Part Name And Number)
      • Explanation About The Scan Tool (M.U.T.-III) Can Bus Diagnostics
      • Diagnostic Trouble Code Diagnosis
        • On-Board Diagnostics
          • Notes
          • How To Connect The Scan Tool (M.U.T.-III)
          • How To Diagnose The Can Bus Line
      • Diagnosis
        • Can Bus Diagnostics Table
        • Can Bus Diagnostics
          • DIAGNOSTIC ITEM 1: Diagnose shorts in the power supply to CAN bus line
            • Notes
            • Function
            • Trouble Judgment Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DIAGNOSTIC ITEM 2: Diagnose shorts in the ground to CAN bus line
            • Notes
            • Function
            • Trouble Judgment Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DIAGNOSTIC ITEM 3: Diagnose shorts between CAN_H and L lines
            • Notes
            • Function
            • Trouble Judgment Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DIAGNOSTIC ITEM 4: Diagnose the terminator resistors
            • Notes
            • Function
            • Trouble Judgment Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DIAGNOSTIC ITEM 5: Diagnose when the scan tool cannot receive the data sent by combination meter
            • Notes
            • Function
            • Trouble Judgment Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DIAGNOSTIC ITEM 6: Diagnose when the scan tool cannot receive the data sent by ETACS-ECU
            • Notes
            • Function
            • Trouble Judgment Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DIAGNOSTIC ITEM 7: Diagnose when the scan tool cannot receive the data sent by A/C-ECU
            • Notes
            • Function
            • Trouble Judgment Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DIAGNOSTIC ITEM 8: Diagnose when the scan tool cannot receive the data sent by SRS-ECU
            • Notes
            • Function
            • Trouble Judgment Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DIAGNOSTIC ITEM 9: Diagnose when the scan tool cannot receive the data sent by TPMS receiver
            • Notes
            • Function
            • Trouble Judgment Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DIAGNOSTIC ITEM 10: Diagnose when the scan tool cannot receive the data sent by the ECM or the PCM
            • Notes
            • Function
            • Trouble Judgment Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DIAGNOSTIC ITEM 11: Diagnose when the scan tool cannot receive the data sent by TCL/ASC-ECU
            • Notes
            • Function
            • Trouble Judgment Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DIAGNOSTIC ITEM 12: Diagnose when the scan tool cannot receive the data sent by convertible top control module.
            • Notes
            • Function
            • Trouble Judgment Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DIAGNOSTIC ITEM 13: Diagnose when the scan tool cannot receive the data sent by the ECM or the PCM and TCL/ASC-ECU.
            • Notes
            • Function
            • Trouble Judgment Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DIAGNOSTIC ITEM 14: Diagnose when the scan tool cannot receive the data sent by the ECM or the PCM and TCL/ASC-ECU.
            • Notes
            • Function
            • Trouble Judgment Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DIAGNOSTIC ITEM 15: Diagnose when the scan tool cannot receive the data sent by the ECM or the PCM , and TCL/ASC-ECU, and convertible top control module.
            • Notes
            • Function
            • Trouble Judgment Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DIAGNOSTIC ITEM 16: Diagnose when the scan tool cannot receive the data sent by steering wheel sensor
            • Notes
            • Function
            • Trouble Judgment Conditions
            • Troubleshooting Hints
            • Diagnosis
      • Can Communication-Related DTC Code (U Code) Table
  • Cruise Control Systems
    • General Description
      • Notes
      • Construction Diagram
    • Cruise Control System Diagnosis
      • Introduction To Auto-Cruise Control System Diagnosis
        • Notes
        • Auto-cruise control system diagnostic trouble codes
      • Diagnostic Troubleshooting Strategy
      • Diagnostic Function
        • How To Connect The Scan Tool (M.U.T.-III)
        • How To Read Diagnostic Trouble Codes
          • Notes
          • Diagnostic Result Display Method When Using The "Cruise" Indicator Light
        • How To Erase Diagnostic Trouble Codes
        • How To Read Data List
        • How To Diagnose The Can Bus Line
      • Diagnostic Trouble Code Chart
      • Diagnostic Trouble Code Procedures
        • DTC 15: Auto-cruise Control Switch System
          • Notes
          • Circuit Operation
          • DTC Set Conditions
            • Check Condition
            • Judgement Criteria
          • Troubleshooting Hints (The Most Likely Causes For This Case:)
          • Diagnosis
        • DTC 22: Stoplight Switch System
          • Notes
          • Circuit Operation
          • DTC Set Conditions
            • Check Condition
            • Judgement Criteria
          • Troubleshooting Hints (The Most Likely Causes For This Case:)
          • Diagnosis
        • DTC 23: ECM or PCM and Its Related Components
          • DTC Set Conditions
          • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
          • Diagnosis
      • Symptom Chart
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: When the Brake Pedal is Depressed, Auto-cruise Control System is not Cancelled
          • Comment
          • Troubleshooting Hints (The Most Likely Causes For This Case:)
          • Diagnosis
        • INSPECTION PROCEDURE 2: When Clutch Pedal is Depressed, Auto-cruise Control System is not Cancelled
          • Notes
          • Circuit Operation
          • Comment
          • Troubleshooting Hints (The Most Likely Causes For This Case:)
          • Diagnosis
        • INSPECTION PROCEDURE 3: When the Selector Lever is Moved to "N" Position, Auto-cruise Control System is not Cancelled
          • Notes
          • Circuit Operation
          • Comment
          • Troubleshooting Hints (The Most Likely Causes For This Case:)
          • Diagnosis
        • INSPECTION PROCEDURE 4: When the Auto-cruise Control "CANCEL" Switch is Set to ON, Auto-cruise Control System is not Cancelled
          • Comment
          • Troubleshooting Hints (The Most Likely Causes For This Case:)
          • Diagnosis
        • INSPECTION PROCEDURE 5: Auto-cruise Control System cannot be Set
          • Comment
          • Troubleshooting Hints (The Most Likely Causes For This Case:)
          • Diagnosis
        • INSPECTION PROCEDURE 6: Hunting (Repeated Acceleration and Deceleration) Occurs at the Set Vehicle Speed
          • Comment
          • Troubleshooting Hints (The Most Likely Causes For This Case:)
          • Diagnosis
        • INSPECTION PROCEDURE 7: When "CRUISE" (MAIN) Switch is Turned "ON", "CRUISE" Indicator Light Inside Combination Meter does not Illuminate. (However, Auto-cruise Control System is Normal)
          • Notes
          • Circuit Operation
          • Comment
          • Troubleshooting Hints
          • Diagnosis
      • Data List Reference Table
      • ECM <M/T> Or Pcm <A/T> Terminal Voltage Reference Chart For Auto-Cruise Control System Operation
    • Special Tools
    • On-Vehicle Service
      • Auto-Cruise Control Switch Check
        • Auto-Cruise Control Main Switch Check
        • Auto-Cruise Control Setting
        • Speed-Increase Setting
        • Speed-Reduction Setting
        • Return To The Set Speed Before Cancellation And Auto-Cruise Control Cancellation
      • Auto-Cruise Control System Component Check
        • Auto-Cruise Control Switch Check
        • Stoplight Switch
        • Clutch Pedal Position Switch <M/T>
        • Transmission Range Switch ("N" Position) <A/T>
        • Throttle Position Sensor
    • Cruise Control
      • Removal And Installation
  • Drivers Assistance Systems - ADAS
    • Rear View Camera
      • General Description
        • Notes
        • Operation
      • Special Tool
      • Trouble Symptom Chart
      • Symptom Procedures
        • Rear View Camera Image Is not Correctly Displayed
          • Notes
          • Comments On Trouble Symptom
          • Probable Causes
          • Diagnostic Procedure
      • Removal And Installation
  • Entertainment Systems
    • Hands-Free Cellular Phone System
      • General Description
        • Notes
        • System Block Diagram
      • Removal And Installation
        • Hands Free Module
        • Microphone Switch
        • Interphone Microphone
        • Installation Service Point
          • >>A<< Interphone Microphone Installation
        • Inspection
          • Microphone Switch Check
          • Illumination Check
          • Interphone Microphone Check
      • Special Tools
      • Trouble Symptom Chart
      • Diagnosis
        • Introduction To Hands Free Cellular Phone Diagnosis
        • Troubleshooting Strategy
      • On-Vehicle Service
        • Erase The PASSCODE
        • Pairing A Cellular Phone Or Deleting A Phone
          • Notes
          • Pairing A Cellular Phone
          • Deleting A Phone
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: When the SPEECH button is pressed, the voice information is not output
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 2: When the SPEECH button is pressed, the voice information is output, but the voice recognition is not performed
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 3: When the hands-free cellular phone system is activated, the audio system is not set to mute. "PHONE (phone)" is not shown on the display
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
    • Radio And Cd Player
      • General Description
        • Radio And Cd Player
          • Notes
          • <Standard Audio System>
          • <Premium Audio System>
        • Speaker
        • Aux Box
      • Radio With Cd Player, Speaker And Antenna Diagnosis
        • Introduction To Audio System Diagnosis
          • Notes
          • Audio Error Codes
        • Audio System Diagnostic Troubleshooting Strategy
        • Symptom Chart
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: When power switch is turned "ON," no power is available
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 2: Remote controlled radio switch: When remote controlled radio power switch is turned "ON," no power is available. But radio and CD player with CD changer power switch is available.
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 3: Remote controlled radio switch: The system does not recognize the remote controlled radio switch (RH) only.
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 4: Remote controlled radio switch: The system does not recognize the remote controlled radio switch (LH) only.
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 5: No Sound.
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 6: No sound from one speaker.
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 7: No sound from door speaker or woofer.
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 8: No sound from tweeter or quarter speaker.
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • Inspection Procedure 9: The sound of external input are not played
          • Notes
          • Comments On Trouble Symptom
          • Probable Causes
          • Diagnosis
        • INSPECTION PROCEDURE 10: Noise: Noise is present while moving (AM)
        • INSPECTION PROCEDURE 11: Noise: Noise is present while moving (FM)
          • Notes
          • Diagnosis
        • INSPECTION PROCEDURE 12: Noise: Sound mixed with noise, only at night (AM)
          • Notes
          • Diagnosis
        • INSPECTION PROCEDURE 13: Noise: Noise is overpowering both AM and FM
          • Diagnosis
        • INSPECTION PROCEDURE 14: Noise: Excessive noise on AM and FM
          • Diagnosis
        • INSPECTION PROCEDURE 15: Noise: Noise is detected with engine running
          • Diagnosis
        • INSPECTION PROCEDURE 16: Noise: Noise appears during vibration or shocks
          • Diagnosis
        • INSPECTION PROCEDURE 17: Noise: Noise is present while moving (FM)
          • Diagnosis
        • INSPECTION PROCEDURE 18: Noise: Constant noise
          • Diagnosis
        • INSPECTION PROCEDURE 19: Radio: No reception (AM)
          • Diagnosis
        • INSPECTION PROCEDURE 20: Radio: Poor reception
          • Diagnosis
        • INSPECTION PROCEDURE 21: Radio: Distortion on AM and/or FM
          • Diagnosis
        • INSPECTION PROCEDURE 22: Radio: Distortion on FM only
          • Diagnosis
        • INSPECTION PROCEDURE 23: Radio: Auto select function inoperative, too few automatic stations are selected
          • Diagnosis
        • INSPECTION PROCEDURE 24: Radio: Preset stations are erased
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 25: CD player, CD auto changer: CD can not be Inserted
          • Diagnosis
        • INSPECTION PROCEDURE 26: CD player, CD auto changer: No sound (CD only)
          • Diagnosis
        • INSPECTION PROCEDURE 27: CD player, CD auto changer: CD sound skips
          • Diagnosis
        • INSPECTION PROCEDURE 28: CD player, CD auto changer: Sound quality is poor
          • Diagnosis
        • INSPECTION PROCEDURE 29: CD player, CD auto changer: CD cannot be ejected
          • Diagnosis
      • Radio With Cd Player
        • Removal And Installation
      • Steering Wheel Audio Remote Control Switch
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Remote Controlled Radio Switch Removal
          • Installation Service Point
            • >>A<< Harness Assembly Installation
        • Inspection
          • Remote Controlled Radio Switch Continuity Check
      • Speaker
        • Removal And Installation
          • <Tweeter/Door Speaker/Quarter Speaker>
          • <Rear Speaker (Woofer)>
      • Amplifier
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Audio Amplifier Installation
      • Antenna
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
      • Aux Adapter
        • Removal And Installation
        • Aux Adapter Inspection
    • Satellite Radio Tuner
      • General Description
        • Satellite Radio
      • Diagnosis
        • Introduction To Satellite Radio Diagnosis
          • ERROR CODE (SIRIUS satellite radio)
        • Satellite Radio System Diagnostic Troubleshooting Strategy
        • Symptom Chart
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: The error code "ANT" is displayed on the multi-center display
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 2: The error code "SAT E" is displayed on the multi-center display
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
      • Special Tool
      • On-Vehicle Service
        • How To Read SIRIUS Id
          • Display The SIRIUS Id On The Multi-Center Display
          • Read The SIRIUS Id Directly From The Satellite Radio Tuner
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Removal Service Point
            • <<A>> Removal Of Satellite Antenna Base
    • Specifications (Chassis Electrical)
      • Fastener Tightening Specifications
      • Service Specifications
        • <Battery>
        • <Combination Meter>
        • <Headlight>
        • <Front Fog Light>
      • Lubricant
        • <Ignition Switch>
  • Exterior Lights
    • Fog Light
      • Front Fog Light
        • Fog Light Removal And Installation
        • Fog Light Switch Removal And Installation
      • Inspection
        • Fog Light Relay Check
        • Fog Light Switch Check
      • On-Vehicle Service
        • Fog Light Aiming
          • Pre-Aiming Instructions
          • Fog Light Adjustment
        • Bulb Replacement
      • Front Fog Light Diagnosis
    • Headlight, Front Side Marker Light And Position Light Assembly
      • Service Precautions Discharge Headlight
        • Notes
        • 1. Checking Procedure For Discharge Headlight Related Parts (Inspection Procedure When Reusing The Controller)
          • 1 - 1 Visual Check Of Controller (Case)
          • 1 - 2 Check Of Wiring Harness Between Controller And Bulb
          • 1 - 3 Check Of Controller Operation
          • 2. Troubleshooting procedure for discharge headlight (diagnostic procedure for malfunctions)
        • Symptom Chart
      • Headlight Diagnosis
      • On-Vehicle Service
        • Headlight Aiming
          • Pre-Aiming Instructions
          • Headlight Adjustment
        • Luminous Intensity Measurement
        • Bulb Replacement
          • Headlight Bulb <Vehicles Without Discharge Headlight>
          • Front Turn-Signal, Parking And Side-Marker Light Bulb
      • Headlight And Front Combination Light
        • Headlight Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Headlight Assembly Removal
            • <<B>> Headlight Bulb Socket Cover Removal <Vehicles With Discharge Headlight>
            • <<C>> Headlight Bulb Removal <Vehicles With Discharge Headlight>
          • Installation Service Point
            • >>A<< Headlight Bulb Installation <Vehicles With Discharge Headlight>
        • Headlight Leveling Switch Removal And Installation
      • Inspection
        • Headlight Leveling Switch Check <Vehicles With Headlight Manual Leveling System>
    • High-Mounted Stoplight
      • Removal And Installation
        • Vehicles Without Large Type Rear Spoiler
        • Vehicles With Large Type Rear Spoiler
    • License Plate Light
      • Removal And Installation
    • Rear Combination Light
      • Diagnosis
      • Special Tool
      • Rear Combination Light
        • Removal And Installation
          • Notes
          • Removal Service Points
            • A - Rear Combination Light Removal
            • B - Socket Assembly Removal
    • Specifications (Chassis Electrical)
      • Fastener Tightening Specifications
      • Service Specifications
        • <Battery>
        • <Combination Meter>
        • <Headlight>
        • <Front Fog Light>
      • Lubricant
        • <Ignition Switch>
  • Gauges & Instrument Panels
    • Combination Meter Assembly
      • General Description
      • Combination Meters Diagnosis
        • Diagnostic Troubleshooting Strategy
        • Diagnosis Function
          • How To Connect Scan Tool (M.U.T.-III)
          • How To Read And Erase Diagnostic Trouble Codes
          • How To Diagnose The Can Bus Lines
        • Diagnostic Trouble Code Chart
      • Diagnostic Trouble Code Procedures
        • DTC B1200: Defective odometer
          • Notes
          • Circuit Operation
          • DTC Set Condition
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • DTC B1201: Defective fuel gauge
          • Notes
          • Circuit Operation
          • DTC Set Condition
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1073: Bus off
          • Notes
          • Circuit Operation
          • DTC Set Condition
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1100: ECM or PCM time-out (related to engine)
          • Notes
          • DTC Set Condition
          • Technical Description (Comment)
            • Notes
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1101: PCM time-out (related to A/T)
          • Notes
          • DTC Set Condition
          • Technical Description (Comment)
            • Notes
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1102: TCL/ASC-ECU time-out
          • Notes
          • DTC Set Condition
          • Technical Description (Comment)
            • Notes
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1109: ETACS-ECU time-out
          • Notes
          • Circuit Operation
          • DTC Set Condition
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1112: SRS-ECU time-out
          • Notes
          • DTC Set Condition
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1114: TPMS-ECU time-out
          • Notes
          • DTC Set Condition
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1120: Failure information on ECM or PCM (related to engine)
          • Notes
          • DTC Set Condition
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1206: Flag invalid
          • Notes
          • Trouble Judgment
          • Comments On Trouble Symptom
            • Current trouble
            • Past trouble
          • Possible Causes
          • Diagnosis
        • DTC U1434: Failure information on TPMS-ECU
          • Notes
          • DTC Set Condition
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • Symptom Chart
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: Communication with scan tool is not possible
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 2: Power supply circuit.; INSPECTION PROCEDURE 3: Odometer and trip meter are not displayed.; INSPECTION PROCEDURE 4: No needle meters work.; INSPECTION PROCEDURE 5: When the ignition switch is turned to the ON position, the indicator and warning lights do not illuminate
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Possible Causes
          • Diagnosis
        • INSPECTION PROCEDURE 6: Speedometer does not work (other meters work); INSPECTION PROCEDURE 7: The fuel gauge needle moves excessively
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 8: Tachometer does not work (other meters work)
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 9: Fuel gauge does not work (other meters work)
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 10: Engine coolant temperature gauge does not work (other meters work)
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 11: The Fuel Warning Light does not Illuminate or go out
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • Data List Reference Table
        • Actuator Test Reference Table
        • Combination Meter Terminal Check
      • Special Tools
      • On-Vehicle Service
        • Speedometer Check
        • Tachometer Check
        • Fuel Level Sensor Check
          • Fuel Level Sensor Resistance
          • Fuel Level Sensor Float Height
      • Combination Meter Assembly
        • Removal And Installation
        • Disassembly And Assembly
    • Interior Trim
      • General Description
        • Operation
          • Seat Belt Warning System
          • Rear View System
      • Seat Belt Diagnosis
      • Inside Rear View Mirror Diagnosis
        • Introduction To Inside Rear View Mirror Diagnosis
        • Inside Rear View Mirror Diagnostic Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: The Inside Rear View Mirror can not be Set to Night Mode
            • Notes
            • Function
            • Troubleshooting Hints
            • Diagnosis
      • On-Vehicle Service
        • Auto-Dimming Feature Test
      • Special Tool
      • Instrument Panel Assembly
        • Removal And Installation
        • Clip And Claw Positions
          • Notes
          • Removal Service Point
            • <<A>> Instrument Panel Under Cover Removal
            • <<B>> Connector Disconnection
            • <<C>> Instrument Panel Assembly Removal
        • Glove Box Lock Cylinder Disassembly And Assembly
          • Notes
          • Disassembly Service Point
            • <<A>> Tumbler Disassembly
          • Assembly Service Point
            • >>A<< Tumbler Assembly
        • Disassembly And Assembly
      • Floor Console Assembly
        • Removal And Installation
        • Disassembly And Assembly
          • Notes
          • Removal Service Point
            • <<A>> Accessory Socket (Battery) Case B
      • Trims
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Clip And Claw Position
            • <Eclipse>
            • <Eclipse SPYDER>
          • Removal Service Point
            • <<A>> Front Pillar Trim Removal
      • Door Trim
        • Removal And Installation
          • <Front Door Trim>
          • Removal Service Point
            • <<A>> Inside Handle Cover Removal
        • Disassembly And Assembly
          • <Front Door Trim>
      • Liftgate Trim
        • Removal And Installation
          • <Eclipse>
      • Headlining
        • Removal And Installation
          • <Eclipse>
          • Removal Service Point
            • <<A>> Headlining Assembly Removal
      • Inside Rear View Mirror
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Inside Rear View Mirror Removal
      • Front Seat Assembly
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Front Seat Assembly Installation
        • Inspection
          • Heated Seat Switch Check
            • Continuity Test Of Heated Seat Switch
          • Seat Cushion Heater Check
          • Seatback Heater Check
          • Heated Seat Relay Continuity Check
          • Power Seat Switch Continuity Check
          • Operation Check Of Power Seat Motor
        • Disassembly And Assembly
          • <Driver's Seat>
          • <Front Passenger's Seat>
          • Removal Service Points
            • <<A>> Seatback Panel Removal
            • <<B>> Seatback Panel Removal
      • Rear Seat Assembly
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Installation Service Points
            • <<A>> Installation Of Rear Seat Cushion Assembly
            • <<B>> Installation Of Rear Seatback Assembly <Eclipse SPYDER>
        • Disassembly And Assembly
          • <Eclipse>
          • <Eclipse SPYDER>
      • Front Seat Belt
        • Removal And Installation
          • Notes
          • <Eclipse SPYDER>
        • Inspection
          • Seat Belt Switch Continuity Check (Driver's Side)
      • Rear Seat Belt
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
      • Specifications
        • Fastener Tightening Specifications
        • Lubricant
          • <Instrument Panel>
    • Multi-Center Display
      • General Description
        • Notes
        • Precautions During Service
          • Diagnosis Tips Concerning The Entire System
          • Diagnosis Tips When Only Specific Function(S) Is Defective
      • Diagnosis
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: The multi-center display does not Show any Information
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 2: "-" (Ambient air temperature sensor error) is displayed on the ambient air temperature display.
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 3: The ambient air temperature display does not change normally.
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 4: On the Audio Screen, "E" cannot Proceed to Next Screen
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 5: The Compass can not be Calibrated Manually, or Goes Out of Calibration Easily.
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Check At Multi-Center Display Unit Terminal
      • Special Tools
      • On-Vehicle Service
        • Compass Calibration
          • One Turn Magnetic Compensation
          • Deflection Angle Compensation
            • Compass Calibration
            • Adjust For Compass Variance
        • Vehicle Magnetic Compensation
          • Demagnetization And Correction Method
      • Multi-Center Display
        • Removal And Installation
        • Disassembly And Assembly
    • Specifications (Chassis Electrical)
      • Fastener Tightening Specifications
      • Service Specifications
        • <Battery>
        • <Combination Meter>
        • <Headlight>
        • <Front Fog Light>
      • Lubricant
        • <Ignition Switch>
  • Headlights
    • Specifications (Chassis Electrical)
      • Fastener Tightening Specifications
      • Service Specifications
        • <Battery>
        • <Combination Meter>
        • <Headlight>
        • <Front Fog Light>
      • Lubricant
        • <Ignition Switch>
  • Heated Glass/Defoggers
    • General Description
      • Defogger Operation
    • Defogger Diagnosis
    • On-Vehicle Service
      • Printed-Heater Lines Check
      • Rear Window Defogger Switch
        • Removal And Installation
        • Inspection
          • Defogger Relay Continuity Check
  • Horns
    • Horn System
      • Horn
        • Diagnosis
        • Horn
          • Removal And Installation
          • Inspection
            • Horn Relay Continuity Check
  • Ignition Switch/Steering Lock
    • Ignition Switch
      • General Description
        • Ignition Key Reminder Tone Alarm
          • Notes
          • Door Lock Prevention Function
        • Ignition Key Reminder Tone Alarm And Door Lock Prevention Function Diagnosis
        • Trouble Symptom Chart
        • Symptom Procedures
          • Malfunction of the ignition switch power supply system
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
      • Ignition Switch
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Steering Lock Cylinder Removal
        • Inspection
          • Ignition Switch Continuity Check
        • Handle Lock Cylinder Disassembly And Assembly
          • Notes
          • Assembly Service Point
            • >>A<< Tumbler Assembly
            • >>B<< Cylinder Sub-Assembly Assembly
    • Specifications (Chassis Electrical)
      • Fastener Tightening Specifications
      • Service Specifications
        • <Battery>
        • <Combination Meter>
        • <Headlight>
        • <Front Fog Light>
      • Lubricant
        • <Ignition Switch>
  • Infotainment
    • Hands-Free Cellular Phone System
      • General Description
        • Notes
        • System Block Diagram
      • Removal And Installation
        • Hands Free Module
        • Microphone Switch
        • Interphone Microphone
        • Installation Service Point
          • >>A<< Interphone Microphone Installation
        • Inspection
          • Microphone Switch Check
          • Illumination Check
          • Interphone Microphone Check
      • Special Tools
      • Trouble Symptom Chart
      • Diagnosis
        • Introduction To Hands Free Cellular Phone Diagnosis
        • Troubleshooting Strategy
      • On-Vehicle Service
        • Erase The PASSCODE
        • Pairing A Cellular Phone Or Deleting A Phone
          • Notes
          • Pairing A Cellular Phone
          • Deleting A Phone
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: When the SPEECH button is pressed, the voice information is not output
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 2: When the SPEECH button is pressed, the voice information is output, but the voice recognition is not performed
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 3: When the hands-free cellular phone system is activated, the audio system is not set to mute. "PHONE (phone)" is not shown on the display
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
    • Radio And Cd Player
      • General Description
        • Radio And Cd Player
          • Notes
          • <Standard Audio System>
          • <Premium Audio System>
        • Speaker
        • Aux Box
      • Radio With Cd Player, Speaker And Antenna Diagnosis
        • Introduction To Audio System Diagnosis
          • Notes
          • Audio Error Codes
        • Audio System Diagnostic Troubleshooting Strategy
        • Symptom Chart
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: When power switch is turned "ON," no power is available
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 2: Remote controlled radio switch: When remote controlled radio power switch is turned "ON," no power is available. But radio and CD player with CD changer power switch is available.
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 3: Remote controlled radio switch: The system does not recognize the remote controlled radio switch (RH) only.
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 4: Remote controlled radio switch: The system does not recognize the remote controlled radio switch (LH) only.
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 5: No Sound.
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 6: No sound from one speaker.
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 7: No sound from door speaker or woofer.
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 8: No sound from tweeter or quarter speaker.
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • Inspection Procedure 9: The sound of external input are not played
          • Notes
          • Comments On Trouble Symptom
          • Probable Causes
          • Diagnosis
        • INSPECTION PROCEDURE 10: Noise: Noise is present while moving (AM)
        • INSPECTION PROCEDURE 11: Noise: Noise is present while moving (FM)
          • Notes
          • Diagnosis
        • INSPECTION PROCEDURE 12: Noise: Sound mixed with noise, only at night (AM)
          • Notes
          • Diagnosis
        • INSPECTION PROCEDURE 13: Noise: Noise is overpowering both AM and FM
          • Diagnosis
        • INSPECTION PROCEDURE 14: Noise: Excessive noise on AM and FM
          • Diagnosis
        • INSPECTION PROCEDURE 15: Noise: Noise is detected with engine running
          • Diagnosis
        • INSPECTION PROCEDURE 16: Noise: Noise appears during vibration or shocks
          • Diagnosis
        • INSPECTION PROCEDURE 17: Noise: Noise is present while moving (FM)
          • Diagnosis
        • INSPECTION PROCEDURE 18: Noise: Constant noise
          • Diagnosis
        • INSPECTION PROCEDURE 19: Radio: No reception (AM)
          • Diagnosis
        • INSPECTION PROCEDURE 20: Radio: Poor reception
          • Diagnosis
        • INSPECTION PROCEDURE 21: Radio: Distortion on AM and/or FM
          • Diagnosis
        • INSPECTION PROCEDURE 22: Radio: Distortion on FM only
          • Diagnosis
        • INSPECTION PROCEDURE 23: Radio: Auto select function inoperative, too few automatic stations are selected
          • Diagnosis
        • INSPECTION PROCEDURE 24: Radio: Preset stations are erased
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 25: CD player, CD auto changer: CD can not be Inserted
          • Diagnosis
        • INSPECTION PROCEDURE 26: CD player, CD auto changer: No sound (CD only)
          • Diagnosis
        • INSPECTION PROCEDURE 27: CD player, CD auto changer: CD sound skips
          • Diagnosis
        • INSPECTION PROCEDURE 28: CD player, CD auto changer: Sound quality is poor
          • Diagnosis
        • INSPECTION PROCEDURE 29: CD player, CD auto changer: CD cannot be ejected
          • Diagnosis
      • Radio With Cd Player
        • Removal And Installation
      • Steering Wheel Audio Remote Control Switch
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Remote Controlled Radio Switch Removal
          • Installation Service Point
            • >>A<< Harness Assembly Installation
        • Inspection
          • Remote Controlled Radio Switch Continuity Check
      • Speaker
        • Removal And Installation
          • <Tweeter/Door Speaker/Quarter Speaker>
          • <Rear Speaker (Woofer)>
      • Amplifier
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Audio Amplifier Installation
      • Antenna
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
      • Aux Adapter
        • Removal And Installation
        • Aux Adapter Inspection
    • Satellite Radio Tuner
      • General Description
        • Satellite Radio
      • Diagnosis
        • Introduction To Satellite Radio Diagnosis
          • ERROR CODE (SIRIUS satellite radio)
        • Satellite Radio System Diagnostic Troubleshooting Strategy
        • Symptom Chart
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: The error code "ANT" is displayed on the multi-center display
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 2: The error code "SAT E" is displayed on the multi-center display
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
      • Special Tool
      • On-Vehicle Service
        • How To Read SIRIUS Id
          • Display The SIRIUS Id On The Multi-Center Display
          • Read The SIRIUS Id Directly From The Satellite Radio Tuner
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Removal Service Point
            • <<A>> Removal Of Satellite Antenna Base
    • Specifications (Chassis Electrical)
      • Fastener Tightening Specifications
      • Service Specifications
        • <Battery>
        • <Combination Meter>
        • <Headlight>
        • <Front Fog Light>
      • Lubricant
        • <Ignition Switch>
  • Interior/Exterior Trim
    • Emblem (Identifying Mark)
      • Removal And Installation
        • Notes
        • Installation Service Point
          • >>A<< Mark Installation
    • Garnishes And Moldings
      • Special Tool
      • Removal And Installation
    • Interior Trim
      • General Description
        • Operation
          • Seat Belt Warning System
          • Rear View System
      • Seat Belt Diagnosis
      • Inside Rear View Mirror Diagnosis
        • Introduction To Inside Rear View Mirror Diagnosis
        • Inside Rear View Mirror Diagnostic Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: The Inside Rear View Mirror can not be Set to Night Mode
            • Notes
            • Function
            • Troubleshooting Hints
            • Diagnosis
      • On-Vehicle Service
        • Auto-Dimming Feature Test
      • Special Tool
      • Instrument Panel Assembly
        • Removal And Installation
        • Clip And Claw Positions
          • Notes
          • Removal Service Point
            • <<A>> Instrument Panel Under Cover Removal
            • <<B>> Connector Disconnection
            • <<C>> Instrument Panel Assembly Removal
        • Glove Box Lock Cylinder Disassembly And Assembly
          • Notes
          • Disassembly Service Point
            • <<A>> Tumbler Disassembly
          • Assembly Service Point
            • >>A<< Tumbler Assembly
        • Disassembly And Assembly
      • Floor Console Assembly
        • Removal And Installation
        • Disassembly And Assembly
          • Notes
          • Removal Service Point
            • <<A>> Accessory Socket (Battery) Case B
      • Trims
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Clip And Claw Position
            • <Eclipse>
            • <Eclipse SPYDER>
          • Removal Service Point
            • <<A>> Front Pillar Trim Removal
      • Door Trim
        • Removal And Installation
          • <Front Door Trim>
          • Removal Service Point
            • <<A>> Inside Handle Cover Removal
        • Disassembly And Assembly
          • <Front Door Trim>
      • Liftgate Trim
        • Removal And Installation
          • <Eclipse>
      • Headlining
        • Removal And Installation
          • <Eclipse>
          • Removal Service Point
            • <<A>> Headlining Assembly Removal
      • Inside Rear View Mirror
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Inside Rear View Mirror Removal
      • Front Seat Assembly
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Front Seat Assembly Installation
        • Inspection
          • Heated Seat Switch Check
            • Continuity Test Of Heated Seat Switch
          • Seat Cushion Heater Check
          • Seatback Heater Check
          • Heated Seat Relay Continuity Check
          • Power Seat Switch Continuity Check
          • Operation Check Of Power Seat Motor
        • Disassembly And Assembly
          • <Driver's Seat>
          • <Front Passenger's Seat>
          • Removal Service Points
            • <<A>> Seatback Panel Removal
            • <<B>> Seatback Panel Removal
      • Rear Seat Assembly
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Installation Service Points
            • <<A>> Installation Of Rear Seat Cushion Assembly
            • <<B>> Installation Of Rear Seatback Assembly <Eclipse SPYDER>
        • Disassembly And Assembly
          • <Eclipse>
          • <Eclipse SPYDER>
      • Front Seat Belt
        • Removal And Installation
          • Notes
          • <Eclipse SPYDER>
        • Inspection
          • Seat Belt Switch Continuity Check (Driver's Side)
      • Rear Seat Belt
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
      • Specifications
        • Fastener Tightening Specifications
        • Lubricant
          • <Instrument Panel>
    • Rear Spoiler
      • Removal And Installation
        • Notes
        • Removal Service Point
          • <<A>> Large Type Rear Spoiler Assembly Removal
        • Installation Service Point
          • >>A<< Tape Installation
    • Side Air Dam
      • Removal And Installation
  • Interior/Illumination Lights
    • Dome Light
      • Dome Light
        • Removal And Installation
          • Eclipse (Vehicles Without Sunroof)
          • Eclipse (Vehicles With Sunroof)
          • Eclipse SPYDER
      • Diagnosis
  • Mirrors
    • Door Mirror
      • General Description
        • Operation Door Mirror
          • Remote Controlled Mirror Operation
          • Heated Door Mirror Operation
      • Heated Door Mirror Diagnosis
        • Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: All Heated Door Mirrors do not Operate
            • Notes
            • Circuit Operation
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 2: The Right or Left Heated Door Mirror does not Operate
            • Notes
            • Circuit Operation
            • Troubleshooting Hints
            • Diagnosis
      • Door Mirror
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Mirror Removal
            • <<B>> Door Mirror Assembly Removal
        • Inspection
          • Remote Controlled Mirror Operation Check
          • Door Mirror Control Switch Continuity Check
          • Heated Door Mirror Check
    • Interior Trim
      • General Description
        • Operation
          • Seat Belt Warning System
          • Rear View System
      • Seat Belt Diagnosis
      • Inside Rear View Mirror Diagnosis
        • Introduction To Inside Rear View Mirror Diagnosis
        • Inside Rear View Mirror Diagnostic Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: The Inside Rear View Mirror can not be Set to Night Mode
            • Notes
            • Function
            • Troubleshooting Hints
            • Diagnosis
      • On-Vehicle Service
        • Auto-Dimming Feature Test
      • Special Tool
      • Instrument Panel Assembly
        • Removal And Installation
        • Clip And Claw Positions
          • Notes
          • Removal Service Point
            • <<A>> Instrument Panel Under Cover Removal
            • <<B>> Connector Disconnection
            • <<C>> Instrument Panel Assembly Removal
        • Glove Box Lock Cylinder Disassembly And Assembly
          • Notes
          • Disassembly Service Point
            • <<A>> Tumbler Disassembly
          • Assembly Service Point
            • >>A<< Tumbler Assembly
        • Disassembly And Assembly
      • Floor Console Assembly
        • Removal And Installation
        • Disassembly And Assembly
          • Notes
          • Removal Service Point
            • <<A>> Accessory Socket (Battery) Case B
      • Trims
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Clip And Claw Position
            • <Eclipse>
            • <Eclipse SPYDER>
          • Removal Service Point
            • <<A>> Front Pillar Trim Removal
      • Door Trim
        • Removal And Installation
          • <Front Door Trim>
          • Removal Service Point
            • <<A>> Inside Handle Cover Removal
        • Disassembly And Assembly
          • <Front Door Trim>
      • Liftgate Trim
        • Removal And Installation
          • <Eclipse>
      • Headlining
        • Removal And Installation
          • <Eclipse>
          • Removal Service Point
            • <<A>> Headlining Assembly Removal
      • Inside Rear View Mirror
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Inside Rear View Mirror Removal
      • Front Seat Assembly
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Front Seat Assembly Installation
        • Inspection
          • Heated Seat Switch Check
            • Continuity Test Of Heated Seat Switch
          • Seat Cushion Heater Check
          • Seatback Heater Check
          • Heated Seat Relay Continuity Check
          • Power Seat Switch Continuity Check
          • Operation Check Of Power Seat Motor
        • Disassembly And Assembly
          • <Driver's Seat>
          • <Front Passenger's Seat>
          • Removal Service Points
            • <<A>> Seatback Panel Removal
            • <<B>> Seatback Panel Removal
      • Rear Seat Assembly
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Installation Service Points
            • <<A>> Installation Of Rear Seat Cushion Assembly
            • <<B>> Installation Of Rear Seatback Assembly <Eclipse SPYDER>
        • Disassembly And Assembly
          • <Eclipse>
          • <Eclipse SPYDER>
      • Front Seat Belt
        • Removal And Installation
          • Notes
          • <Eclipse SPYDER>
        • Inspection
          • Seat Belt Switch Continuity Check (Driver's Side)
      • Rear Seat Belt
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
      • Specifications
        • Fastener Tightening Specifications
        • Lubricant
          • <Instrument Panel>
    • Specifications (Exterior)
      • Fastener Tightening Specifications
      • Service Specifications
      • Adhesive
  • Seats
    • Interior Trim
      • General Description
        • Operation
          • Seat Belt Warning System
          • Rear View System
      • Seat Belt Diagnosis
      • Inside Rear View Mirror Diagnosis
        • Introduction To Inside Rear View Mirror Diagnosis
        • Inside Rear View Mirror Diagnostic Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: The Inside Rear View Mirror can not be Set to Night Mode
            • Notes
            • Function
            • Troubleshooting Hints
            • Diagnosis
      • On-Vehicle Service
        • Auto-Dimming Feature Test
      • Special Tool
      • Instrument Panel Assembly
        • Removal And Installation
        • Clip And Claw Positions
          • Notes
          • Removal Service Point
            • <<A>> Instrument Panel Under Cover Removal
            • <<B>> Connector Disconnection
            • <<C>> Instrument Panel Assembly Removal
        • Glove Box Lock Cylinder Disassembly And Assembly
          • Notes
          • Disassembly Service Point
            • <<A>> Tumbler Disassembly
          • Assembly Service Point
            • >>A<< Tumbler Assembly
        • Disassembly And Assembly
      • Floor Console Assembly
        • Removal And Installation
        • Disassembly And Assembly
          • Notes
          • Removal Service Point
            • <<A>> Accessory Socket (Battery) Case B
      • Trims
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Clip And Claw Position
            • <Eclipse>
            • <Eclipse SPYDER>
          • Removal Service Point
            • <<A>> Front Pillar Trim Removal
      • Door Trim
        • Removal And Installation
          • <Front Door Trim>
          • Removal Service Point
            • <<A>> Inside Handle Cover Removal
        • Disassembly And Assembly
          • <Front Door Trim>
      • Liftgate Trim
        • Removal And Installation
          • <Eclipse>
      • Headlining
        • Removal And Installation
          • <Eclipse>
          • Removal Service Point
            • <<A>> Headlining Assembly Removal
      • Inside Rear View Mirror
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Inside Rear View Mirror Removal
      • Front Seat Assembly
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Front Seat Assembly Installation
        • Inspection
          • Heated Seat Switch Check
            • Continuity Test Of Heated Seat Switch
          • Seat Cushion Heater Check
          • Seatback Heater Check
          • Heated Seat Relay Continuity Check
          • Power Seat Switch Continuity Check
          • Operation Check Of Power Seat Motor
        • Disassembly And Assembly
          • <Driver's Seat>
          • <Front Passenger's Seat>
          • Removal Service Points
            • <<A>> Seatback Panel Removal
            • <<B>> Seatback Panel Removal
      • Rear Seat Assembly
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Installation Service Points
            • <<A>> Installation Of Rear Seat Cushion Assembly
            • <<B>> Installation Of Rear Seatback Assembly <Eclipse SPYDER>
        • Disassembly And Assembly
          • <Eclipse>
          • <Eclipse SPYDER>
      • Front Seat Belt
        • Removal And Installation
          • Notes
          • <Eclipse SPYDER>
        • Inspection
          • Seat Belt Switch Continuity Check (Driver's Side)
      • Rear Seat Belt
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
      • Specifications
        • Fastener Tightening Specifications
        • Lubricant
          • <Instrument Panel>
  • Steering Column Switches
    • Removal And Installation
      • Turn-Signal Light/Lighting Switch And Windshield Wiper/Windshield Washer Switch
      • Column Switch Body
        • Notes
        • Removal Service Point
          • <<A>> Column Switch Connector Removal
  • Warning Systems
    • Hazard Warning Light Switch
      • Hazard Warning Light Diagnosis
      • Hazard Warning Light Switch
        • Removal And Installation
        • Inspection
          • Hazard Warning Light Switch Check
  • Window Motors & Regulators
    • Window Glass
      • General
        • Notes
        • Items
        • Window Glass Installation
      • Window Glass Diagnosis
        • Introduction To Window Glass Diagnosis
        • Window Glass Diagnostic Troubleshooting Strategy
        • Window Glass Diagnostic Trouble Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Water Leak Through Windshield/Water Leak Through Quarter Window Glass/Water Leak Though Liftgate Window Glass
            • Diagnosis
      • Special Tool
      • Windshield
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Windshield Removal
          • Installation Service Points
            • >>A<< Windshield Spacer/Glass Stopper/Windshield Molding Installation
            • >>B<< Windshield Installation
      • Quarter Window Glass
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Quarter Window Glass Assembly Removal
          • Installation Service Points
            • >>A<< Gasket/Clip Installation
            • >>B<< Quarter Window Glass Assembly Installation
      • Liftgate Window Glass
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Liftgate Window Glass Removal
          • Installation Service Points
            • >>A<< Glass Stopper/Lower Molding/Upper Molding Installation
            • >>B<< Liftgate Window Glass Installation
        • REMOVAL AND INSTALLATION
          • Notes
          • Removal Service Point
            • <<A>> Liftgate Window Glass Removal
          • Installation Service Points
            • >>A<< Glass Stopper/Liftgate Window Glass Molding Side Installation
            • >>B<< Liftgate Window Glass Installation
  • Wiper/Washer Systems
    • Rear Wiper And Washer System
      • General Description
        • Rear Wiper And Washer Operation
          • Rear Wiper Operation
          • Rear Washer Operation
      • Rear Wiper And Washer Diagnosis
      • On-Vehicle Service
        • Check Of Rear Wiper Operation When Selector Lever (Or Gearshift Lever) Is At "R" Position
      • Rear Wiper And Washer
        • Removal And Installation
          • Notes
          • Installation Service Points
            • >>A<< Grommet Installation
            • >>B<< Rear Wiper Blade Installation
            • >>C<< Rear Wiper Arm Installation
        • Inspection
          • Rear Wiper Motor Check
          • Wiper Motor Operation
          • Wiper Motor At Stop Position Operation
          • Rear Washer Fluid Ejection Check
          • Rear Wiper And Washer Switch Check
    • Specifications (Exterior)
      • Fastener Tightening Specifications
      • Service Specifications
      • Adhesive
    • Windshield Wiper And Washer System
      • General Description
        • Windshield Wiper And Washer Operation
          • Windshield Low-Speed (And High-Speed) Wiper Operation
          • Windshield Intermittent Wiper Operation (Vehicle Speed-Sensitive Variable Type)
          • Windshield Mist Wiper Operation
          • Windshield Washer Operation
      • Windshield Wiper And Washer Diagnosis
      • Special Tools
      • On-Vehicle Service
        • Windshield Intermittent Wiper Interval Check
        • Windshield Washer Fluid Ejection Check
      • Windshield Wiper
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Windshield Wiper Link/Windshield Wiper Motor Removal
          • Installation Service Points
            • >>A<< Windshield Wiper Blade Installation
            • >>B<< Windshield Wiper Arm Installation
        • Inspection
          • Windshield Wiper Motor Check
          • Windshield Wiper Motor At Low Or High Speed Operation
          • Windshield Wiper Motor At Stop Position Operation
          • Windshield Wiper Switch Check
          • Windshield Intermittent Wiper Interval Check
      • Windshield Washer
        • Removal And Installation
        • Inspection
          • Windshield Washer Motor Check
          • Windshield Washer Switch Check
• Body & Frame
  • Door Locks
    • Door System
      • General Description
        • Operation
          • Central Door Locking System
          • Power Windows
          • Short Stroke Mechanism
      • Central Door Locking System Diagnosis
      • Power Window Diagnosis
        • Introduction To Power Window Diagnosis
          • Notes
          • Short Stroke Mechanism
        • Power Window Diagnostic Troubleshooting Strategy
        • Trouble Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Short Stroke Mechanism does not Work.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 2: Short Stroke Mechanism does not Work.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
      • Door Diagnosis
        • Introduction To Glass And Door Diagnosis
      • Glass And Door Diagnostic Troubleshooting Strategy
        • Notes
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Water Leak Through Door Window Glass
            • Diagnosis
          • INSPECTION PROCEDURE 2: Door Window Glass Malfunction
            • Diagnosis
          • INSPECTION PROCEDURE 3: Water Leak Through Door Edge
            • Diagnosis
          • INSPECTION PROCEDURE 4: Water Leak from Door Center
            • Diagnosis
          • INSPECTION PROCEDURE 5: Door Hard to Open
            • Diagnosis
          • INSPECTION PROCEDURE 6: Door does not Open or Close Completely
            • Diagnosis
          • INSPECTION PROCEDURE 7: Uneven Gap Between Body
            • Diagnosis
          • INSPECTION PROCEDURE 8: Wind Noise Around Door
            • Diagnosis
        • How To Locate Wind Noise
      • Special Tools
      • On-Vehicle Service
        • Front Door Fit Adjustment
        • Door Window Glass Adjustment <Eclipse>
        • Door Window Glass Adjustment <Eclipse SPYDER>
        • Power Window Timer Function Check
        • Power Window Operating Current Check
        • Power Window Relay Check
        • Power Window Check
        • Short Stroke Mechanism Fully Closed Position Learning Procedure
        • Central Door Locking System Inspection
        • Forgotten Key Prevention Function Check
        • Door Outside Handle Play Check
        • Door Inside Handle Play Check
          • Door Inside Handle Knob Play Check
          • Door Inside Handle Lock Knob Stroke Check
      • Door Assembly
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Striker Installation
        • Inspection
          • Door Switch Check
      • Door Glass And Regulator
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Door Window Glass Mounting Bolt Removal
          • Installation Service Points
            • >>A<< Door Window Glass Mounting Bolt Installation
            • >>B<< Door Window Module Assembly Installation
        • Inspection
          • Power Window Switch Continuity Check
          • Main Switch
          • Sub Switch
      • Door Handle And Latch
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Door Check Installation
        • Door Lock Cylinder Disassembly And Assembly
          • Notes
          • Assembly Service Points
            • >>A<< Tumbler Assembly
            • >>B<< Cylinder Sub-Assembly Assembly
            • >>C<< Cap Assembly
        • Inspection
          • Front Door Latch Check
          • Central Door Lock Switch Continuity Check
          • Short Stroke Switch Continuity Check
      • Window Glass RUNCHANNEL And Door Opening Weatherstrip
        • Removal And Installation
          • Notes
          • Installation Service Points
            • >>A<< Door Window Weatherstrip Holder Installation
            • >>B<< Door Drip Weatherstrip Installation
            • >>C<< Door Opening Weatherstrip Outer Installation
    • Immobilizer System
      • General Description
        • Notes
        • Construction Diagram
        • Operation
      • Encrypted Code Registration Criteria Table
      • Immobilizer System Diagnosis
        • Introduction To Immobilizer System Diagnosis
        • Immobilizer System Diagnostic Troubleshooting Strategy
        • Diagnosis Function
          • How To Connect Scan Tool (M.U.T.-III)
          • How To Read And Erase Diagnostic Trouble Codes
          • How To Read Data List
        • Diagnostic Trouble Code Chart
      • Diagnostic Trouble Code Procedures
        • DTC B1702: Reception Error of Transponder Data
          • Notes
          • Circuit Operation
          • DTC Set Condition
          • Troubleshooting Hints
          • Diagnosis
        • DTC B1703: Transponder Data Inconsistent
          • DTC Set Condition
          • Troubleshooting Hints
          • Diagnosis
        • DTC B1731: Immobilizer Communication Failure
          • DTC Set Condition
          • Technical Description (Comment)
          • Troubleshooting Hints
            • Notes
            • Diagnosis
        • DTC B1761: VIN Not Registered
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • Symptom Chart
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: The Ignition Key cannot be Registered
          • Technical Description (Comment)
          • Troubleshooting Hints
        • INSPECTION PROCEDURE 2: Engine Cranks, but does not Start
          • Technical Description
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 3: The Immobilizer Indicator Light does not Illuminate
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • Data List Reference Table
        • Check At ETACS-Ecu (Immobilizer-Ecu) Terminal
      • Special Tools
      • On-Vehicle Service
        • Encrypted Code Registration Procedure
          • Notes
          • Precautions During Service
          • Encrypted Code Registration Using Ignition Key <Registration Using Scan Tool MB991958 (M.U.T.-III Sub Assembly)>
          • Encrypted Code Registration Using Ignition Key <Registration Using Ignition Key Only>
          • Encrypted Code Registration Using Barcode No
      • Key Ring Antenna
        • Removal And Installation
        • Inspection
          • Key Reminder Switch Check
      • ETACS-Ecu
        • Removal And Installation
    • Keyless Entry System
      • General Description
      • Keyless Entry System Diagnosis
      • Special Tool
      • On-Vehicle Service
        • Keyless Entry System Inspection
        • Keyless Entry System Timer Lock Function Inspection
        • Enabling/Disabling The ANSWERBACK Function
          • Notes
          • Enabling/Disabling The Hazard ANSWERBACK Function
            • How To Adjust Hazard ANSWERBACK When The Transmitter Is Used To Lock Doors
            • How To Adjust Hazard ANSWERBACK When The Transmitter Is Used To Unlock Doors
            • Enabling/Disabling The Horn ANSWERBACK Function
        • How To Register Secret Code
          • Notes
          • When Special Tool MB991824 (V.C.I.) Is Used
      • Transmitter
        • Disassembly And Assembly
          • Notes
          • Disassembly Service Points
            • <<A>> Upper Cover Removal
            • <<B>> Battery Removal
          • Assembly Service Point
            • >>A<< Battery Installation
        • Inspection
          • Transmitter Battery Check
    • Theft Alarm System
      • Theft-Alarm System Diagnosis
      • Removal And Installation
        • Theft-alarm system component parts
        • Panic alarm system component parts
      • Inspection
        • Theft-Alarm Indicator Light Check
  • Exterior Body Panels
    • Door System
      • General Description
        • Operation
          • Central Door Locking System
          • Power Windows
          • Short Stroke Mechanism
      • Central Door Locking System Diagnosis
      • Power Window Diagnosis
        • Introduction To Power Window Diagnosis
          • Notes
          • Short Stroke Mechanism
        • Power Window Diagnostic Troubleshooting Strategy
        • Trouble Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Short Stroke Mechanism does not Work.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 2: Short Stroke Mechanism does not Work.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
      • Door Diagnosis
        • Introduction To Glass And Door Diagnosis
      • Glass And Door Diagnostic Troubleshooting Strategy
        • Notes
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Water Leak Through Door Window Glass
            • Diagnosis
          • INSPECTION PROCEDURE 2: Door Window Glass Malfunction
            • Diagnosis
          • INSPECTION PROCEDURE 3: Water Leak Through Door Edge
            • Diagnosis
          • INSPECTION PROCEDURE 4: Water Leak from Door Center
            • Diagnosis
          • INSPECTION PROCEDURE 5: Door Hard to Open
            • Diagnosis
          • INSPECTION PROCEDURE 6: Door does not Open or Close Completely
            • Diagnosis
          • INSPECTION PROCEDURE 7: Uneven Gap Between Body
            • Diagnosis
          • INSPECTION PROCEDURE 8: Wind Noise Around Door
            • Diagnosis
        • How To Locate Wind Noise
      • Special Tools
      • On-Vehicle Service
        • Front Door Fit Adjustment
        • Door Window Glass Adjustment <Eclipse>
        • Door Window Glass Adjustment <Eclipse SPYDER>
        • Power Window Timer Function Check
        • Power Window Operating Current Check
        • Power Window Relay Check
        • Power Window Check
        • Short Stroke Mechanism Fully Closed Position Learning Procedure
        • Central Door Locking System Inspection
        • Forgotten Key Prevention Function Check
        • Door Outside Handle Play Check
        • Door Inside Handle Play Check
          • Door Inside Handle Knob Play Check
          • Door Inside Handle Lock Knob Stroke Check
      • Door Assembly
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Striker Installation
        • Inspection
          • Door Switch Check
      • Door Glass And Regulator
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Door Window Glass Mounting Bolt Removal
          • Installation Service Points
            • >>A<< Door Window Glass Mounting Bolt Installation
            • >>B<< Door Window Module Assembly Installation
        • Inspection
          • Power Window Switch Continuity Check
          • Main Switch
          • Sub Switch
      • Door Handle And Latch
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Door Check Installation
        • Door Lock Cylinder Disassembly And Assembly
          • Notes
          • Assembly Service Points
            • >>A<< Tumbler Assembly
            • >>B<< Cylinder Sub-Assembly Assembly
            • >>C<< Cap Assembly
        • Inspection
          • Front Door Latch Check
          • Central Door Lock Switch Continuity Check
          • Short Stroke Switch Continuity Check
      • Window Glass RUNCHANNEL And Door Opening Weatherstrip
        • Removal And Installation
          • Notes
          • Installation Service Points
            • >>A<< Door Window Weatherstrip Holder Installation
            • >>B<< Door Drip Weatherstrip Installation
            • >>C<< Door Opening Weatherstrip Outer Installation
    • Fender
      • Fender Removal And Installation
    • Front Bumper Assembly And Radiator Grille
      • Removal And Installation
      • Disassembly And Assembly
    • Fuel Filler Lid
      • Removal And Installation
    • Hood
      • Body Diagnosis
        • Introduction To Hood Diagnosis
        • Hood Diagnostic Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Difficult Locking and Unlocking
            • Diagnosis
          • INSPECTION PROCEDURE 2: Uneven Body Clearance
            • Diagnosis
          • INSPECTION PROCEDURE 3: Uneven Height
            • Diagnosis
      • On-Vehicle Service
        • Adjustment Of Clearance Around Hood
        • Alignment Of Hood Latch And Striker
        • Adjustment Of Hood Height
      • Hood
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Hood Lock Release Cable Removal
          • Installation Service Point
            • >>A<< Hood Switch Installation
        • Inspection
          • Hood Switch Check
    • Liftgate
      • Liftgate Diagnosis
        • Introduction To Liftgate Diagnosis
        • Liftgate Diagnostic Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Difficult Locking and Unlocking
            • Diagnosis
          • INSPECTION PROCEDURE 2: Uneven Body Clearance
            • Diagnosis
          • INSPECTION PROCEDURE 3: Uneven Height
            • Diagnosis
      • Special Tools
      • On-Vehicle Service
        • Adjustment Of Clearance Around Liftgate
        • Alignment Of Liftgate Latch And Liftgate Striker
        • Adjustment Of Liftgate Height
      • Liftgate
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Floor Wiring Harness Removal
            • <<B>> Liftgate Gas Spring Removal
          • Installation Service Points
            • >>A<< Liftgate Hinge Installation
            • >>B<< Floor Wiring Harness Installation
            • >>C<< Liftgate Opening Weatherstrip Installation
        • Inspection
          • Liftgate Lock Release Handle Continuity Check
          • Liftgate Lock Actuator
            • Notes
            • Liftgate Latch Switch
    • Loose Panel
      • Removal And Installation
        • Notes
        • Installation Service Point
          • >>A<< Front Pillar Gusset <Convertible>
    • Rear Bumper Assembly
      • Removal And Installation
    • Specifications (Body)
      • Fastener Tightening Specifications
      • Service Specifications
        • <Door>
        • <Keyless Entry System>
        • <Sunroof>
      • Lubricant
        • <Door, Trunk Lid>
        • <Degrease Agent>
      • Sealant And Adhesives
        • <Window Glass>
        • <Liftgate>
        • <Convertible Top>
      • Component Identifications
        • <Door Check>
    • Specifications (Exterior)
      • Fastener Tightening Specifications
      • Service Specifications
      • Adhesive
    • Under Cover
      • Removal And Installation
  • Exterior/Interior Trim
    • Emblem (Identifying Mark)
      • Removal And Installation
        • Notes
        • Installation Service Point
          • >>A<< Mark Installation
    • Garnishes And Moldings
      • Special Tool
      • Removal And Installation
    • Interior Trim
      • General Description
        • Operation
          • Seat Belt Warning System
          • Rear View System
      • Seat Belt Diagnosis
      • Inside Rear View Mirror Diagnosis
        • Introduction To Inside Rear View Mirror Diagnosis
        • Inside Rear View Mirror Diagnostic Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: The Inside Rear View Mirror can not be Set to Night Mode
            • Notes
            • Function
            • Troubleshooting Hints
            • Diagnosis
      • On-Vehicle Service
        • Auto-Dimming Feature Test
      • Special Tool
      • Instrument Panel Assembly
        • Removal And Installation
        • Clip And Claw Positions
          • Notes
          • Removal Service Point
            • <<A>> Instrument Panel Under Cover Removal
            • <<B>> Connector Disconnection
            • <<C>> Instrument Panel Assembly Removal
        • Glove Box Lock Cylinder Disassembly And Assembly
          • Notes
          • Disassembly Service Point
            • <<A>> Tumbler Disassembly
          • Assembly Service Point
            • >>A<< Tumbler Assembly
        • Disassembly And Assembly
      • Floor Console Assembly
        • Removal And Installation
        • Disassembly And Assembly
          • Notes
          • Removal Service Point
            • <<A>> Accessory Socket (Battery) Case B
      • Trims
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Clip And Claw Position
            • <Eclipse>
            • <Eclipse SPYDER>
          • Removal Service Point
            • <<A>> Front Pillar Trim Removal
      • Door Trim
        • Removal And Installation
          • <Front Door Trim>
          • Removal Service Point
            • <<A>> Inside Handle Cover Removal
        • Disassembly And Assembly
          • <Front Door Trim>
      • Liftgate Trim
        • Removal And Installation
          • <Eclipse>
      • Headlining
        • Removal And Installation
          • <Eclipse>
          • Removal Service Point
            • <<A>> Headlining Assembly Removal
      • Inside Rear View Mirror
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Inside Rear View Mirror Removal
      • Front Seat Assembly
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Front Seat Assembly Installation
        • Inspection
          • Heated Seat Switch Check
            • Continuity Test Of Heated Seat Switch
          • Seat Cushion Heater Check
          • Seatback Heater Check
          • Heated Seat Relay Continuity Check
          • Power Seat Switch Continuity Check
          • Operation Check Of Power Seat Motor
        • Disassembly And Assembly
          • <Driver's Seat>
          • <Front Passenger's Seat>
          • Removal Service Points
            • <<A>> Seatback Panel Removal
            • <<B>> Seatback Panel Removal
      • Rear Seat Assembly
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Installation Service Points
            • <<A>> Installation Of Rear Seat Cushion Assembly
            • <<B>> Installation Of Rear Seatback Assembly <Eclipse SPYDER>
        • Disassembly And Assembly
          • <Eclipse>
          • <Eclipse SPYDER>
      • Front Seat Belt
        • Removal And Installation
          • Notes
          • <Eclipse SPYDER>
        • Inspection
          • Seat Belt Switch Continuity Check (Driver's Side)
      • Rear Seat Belt
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
      • Specifications
        • Fastener Tightening Specifications
        • Lubricant
          • <Instrument Panel>
    • Rear Spoiler
      • Removal And Installation
        • Notes
        • Removal Service Point
          • <<A>> Large Type Rear Spoiler Assembly Removal
        • Installation Service Point
          • >>A<< Tape Installation
    • Side Air Dam
      • Removal And Installation
  • Ignition Switch/Steering Lock
    • Ignition Switch
      • General Description
        • Ignition Key Reminder Tone Alarm
          • Notes
          • Door Lock Prevention Function
        • Ignition Key Reminder Tone Alarm And Door Lock Prevention Function Diagnosis
        • Trouble Symptom Chart
        • Symptom Procedures
          • Malfunction of the ignition switch power supply system
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
      • Ignition Switch
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Steering Lock Cylinder Removal
        • Inspection
          • Ignition Switch Continuity Check
        • Handle Lock Cylinder Disassembly And Assembly
          • Notes
          • Assembly Service Point
            • >>A<< Tumbler Assembly
            • >>B<< Cylinder Sub-Assembly Assembly
    • Specifications (Chassis Electrical)
      • Fastener Tightening Specifications
      • Service Specifications
        • <Battery>
        • <Combination Meter>
        • <Headlight>
        • <Front Fog Light>
      • Lubricant
        • <Ignition Switch>
  • Mirrors
    • Door Mirror
      • General Description
        • Operation Door Mirror
          • Remote Controlled Mirror Operation
          • Heated Door Mirror Operation
      • Heated Door Mirror Diagnosis
        • Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: All Heated Door Mirrors do not Operate
            • Notes
            • Circuit Operation
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 2: The Right or Left Heated Door Mirror does not Operate
            • Notes
            • Circuit Operation
            • Troubleshooting Hints
            • Diagnosis
      • Door Mirror
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Mirror Removal
            • <<B>> Door Mirror Assembly Removal
        • Inspection
          • Remote Controlled Mirror Operation Check
          • Door Mirror Control Switch Continuity Check
          • Heated Door Mirror Check
    • Interior Trim
      • General Description
        • Operation
          • Seat Belt Warning System
          • Rear View System
      • Seat Belt Diagnosis
      • Inside Rear View Mirror Diagnosis
        • Introduction To Inside Rear View Mirror Diagnosis
        • Inside Rear View Mirror Diagnostic Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: The Inside Rear View Mirror can not be Set to Night Mode
            • Notes
            • Function
            • Troubleshooting Hints
            • Diagnosis
      • On-Vehicle Service
        • Auto-Dimming Feature Test
      • Special Tool
      • Instrument Panel Assembly
        • Removal And Installation
        • Clip And Claw Positions
          • Notes
          • Removal Service Point
            • <<A>> Instrument Panel Under Cover Removal
            • <<B>> Connector Disconnection
            • <<C>> Instrument Panel Assembly Removal
        • Glove Box Lock Cylinder Disassembly And Assembly
          • Notes
          • Disassembly Service Point
            • <<A>> Tumbler Disassembly
          • Assembly Service Point
            • >>A<< Tumbler Assembly
        • Disassembly And Assembly
      • Floor Console Assembly
        • Removal And Installation
        • Disassembly And Assembly
          • Notes
          • Removal Service Point
            • <<A>> Accessory Socket (Battery) Case B
      • Trims
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Clip And Claw Position
            • <Eclipse>
            • <Eclipse SPYDER>
          • Removal Service Point
            • <<A>> Front Pillar Trim Removal
      • Door Trim
        • Removal And Installation
          • <Front Door Trim>
          • Removal Service Point
            • <<A>> Inside Handle Cover Removal
        • Disassembly And Assembly
          • <Front Door Trim>
      • Liftgate Trim
        • Removal And Installation
          • <Eclipse>
      • Headlining
        • Removal And Installation
          • <Eclipse>
          • Removal Service Point
            • <<A>> Headlining Assembly Removal
      • Inside Rear View Mirror
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Inside Rear View Mirror Removal
      • Front Seat Assembly
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Front Seat Assembly Installation
        • Inspection
          • Heated Seat Switch Check
            • Continuity Test Of Heated Seat Switch
          • Seat Cushion Heater Check
          • Seatback Heater Check
          • Heated Seat Relay Continuity Check
          • Power Seat Switch Continuity Check
          • Operation Check Of Power Seat Motor
        • Disassembly And Assembly
          • <Driver's Seat>
          • <Front Passenger's Seat>
          • Removal Service Points
            • <<A>> Seatback Panel Removal
            • <<B>> Seatback Panel Removal
      • Rear Seat Assembly
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Installation Service Points
            • <<A>> Installation Of Rear Seat Cushion Assembly
            • <<B>> Installation Of Rear Seatback Assembly <Eclipse SPYDER>
        • Disassembly And Assembly
          • <Eclipse>
          • <Eclipse SPYDER>
      • Front Seat Belt
        • Removal And Installation
          • Notes
          • <Eclipse SPYDER>
        • Inspection
          • Seat Belt Switch Continuity Check (Driver's Side)
      • Rear Seat Belt
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
      • Specifications
        • Fastener Tightening Specifications
        • Lubricant
          • <Instrument Panel>
    • Specifications (Exterior)
      • Fastener Tightening Specifications
      • Service Specifications
      • Adhesive
  • Seats
    • Interior Trim
      • General Description
        • Operation
          • Seat Belt Warning System
          • Rear View System
      • Seat Belt Diagnosis
      • Inside Rear View Mirror Diagnosis
        • Introduction To Inside Rear View Mirror Diagnosis
        • Inside Rear View Mirror Diagnostic Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: The Inside Rear View Mirror can not be Set to Night Mode
            • Notes
            • Function
            • Troubleshooting Hints
            • Diagnosis
      • On-Vehicle Service
        • Auto-Dimming Feature Test
      • Special Tool
      • Instrument Panel Assembly
        • Removal And Installation
        • Clip And Claw Positions
          • Notes
          • Removal Service Point
            • <<A>> Instrument Panel Under Cover Removal
            • <<B>> Connector Disconnection
            • <<C>> Instrument Panel Assembly Removal
        • Glove Box Lock Cylinder Disassembly And Assembly
          • Notes
          • Disassembly Service Point
            • <<A>> Tumbler Disassembly
          • Assembly Service Point
            • >>A<< Tumbler Assembly
        • Disassembly And Assembly
      • Floor Console Assembly
        • Removal And Installation
        • Disassembly And Assembly
          • Notes
          • Removal Service Point
            • <<A>> Accessory Socket (Battery) Case B
      • Trims
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Clip And Claw Position
            • <Eclipse>
            • <Eclipse SPYDER>
          • Removal Service Point
            • <<A>> Front Pillar Trim Removal
      • Door Trim
        • Removal And Installation
          • <Front Door Trim>
          • Removal Service Point
            • <<A>> Inside Handle Cover Removal
        • Disassembly And Assembly
          • <Front Door Trim>
      • Liftgate Trim
        • Removal And Installation
          • <Eclipse>
      • Headlining
        • Removal And Installation
          • <Eclipse>
          • Removal Service Point
            • <<A>> Headlining Assembly Removal
      • Inside Rear View Mirror
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Inside Rear View Mirror Removal
      • Front Seat Assembly
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Front Seat Assembly Installation
        • Inspection
          • Heated Seat Switch Check
            • Continuity Test Of Heated Seat Switch
          • Seat Cushion Heater Check
          • Seatback Heater Check
          • Heated Seat Relay Continuity Check
          • Power Seat Switch Continuity Check
          • Operation Check Of Power Seat Motor
        • Disassembly And Assembly
          • <Driver's Seat>
          • <Front Passenger's Seat>
          • Removal Service Points
            • <<A>> Seatback Panel Removal
            • <<B>> Seatback Panel Removal
      • Rear Seat Assembly
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Installation Service Points
            • <<A>> Installation Of Rear Seat Cushion Assembly
            • <<B>> Installation Of Rear Seatback Assembly <Eclipse SPYDER>
        • Disassembly And Assembly
          • <Eclipse>
          • <Eclipse SPYDER>
      • Front Seat Belt
        • Removal And Installation
          • Notes
          • <Eclipse SPYDER>
        • Inspection
          • Seat Belt Switch Continuity Check (Driver's Side)
      • Rear Seat Belt
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
      • Specifications
        • Fastener Tightening Specifications
        • Lubricant
          • <Instrument Panel>
  • Sun Roof/T-Top/Convertible Top
    • Sunroof Assembly
      • General Description
      • Sunroof Diagnosis
      • Special Tools
      • On-Vehicle Service
        • Water Test
        • Sunroof Fit Adjustment
        • Sunroof Check
        • Sunroof Timer Function Check
        • Roof Lid Glass Operation Current Check
        • Sunroof Operation Check
          • Notes
          • Basic Operation
          • Sunroof Timer Mechanism
      • Sunroof Assembly
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Rear Drain Pipe/Front Drain Pipe Installation
        • Inspection
          • Sunroof Switch Continuity Check
        • Disassembly And Assembly
  • Windows
    • Window Glass
      • General
        • Notes
        • Items
        • Window Glass Installation
      • Window Glass Diagnosis
        • Introduction To Window Glass Diagnosis
        • Window Glass Diagnostic Troubleshooting Strategy
        • Window Glass Diagnostic Trouble Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Water Leak Through Windshield/Water Leak Through Quarter Window Glass/Water Leak Though Liftgate Window Glass
            • Diagnosis
      • Special Tool
      • Windshield
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Windshield Removal
          • Installation Service Points
            • >>A<< Windshield Spacer/Glass Stopper/Windshield Molding Installation
            • >>B<< Windshield Installation
      • Quarter Window Glass
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Quarter Window Glass Assembly Removal
          • Installation Service Points
            • >>A<< Gasket/Clip Installation
            • >>B<< Quarter Window Glass Assembly Installation
      • Liftgate Window Glass
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Liftgate Window Glass Removal
          • Installation Service Points
            • >>A<< Glass Stopper/Lower Molding/Upper Molding Installation
            • >>B<< Liftgate Window Glass Installation
        • REMOVAL AND INSTALLATION
          • Notes
          • Removal Service Point
            • <<A>> Liftgate Window Glass Removal
          • Installation Service Points
            • >>A<< Glass Stopper/Liftgate Window Glass Molding Side Installation
            • >>B<< Liftgate Window Glass Installation
• Brakes
  • Anti-Lock Brakes
    • Traction Control/Active Stability Control System
      • General Description
        • Notes
        • Construction Diagram
        • System Configuration Diagram
        • System Check Sound
        • TCL/ASC Operation Sounds And Sensations
        • Sensor
          • G And Yaw Rate Sensor
          • Steering Wheel Sensor
          • ASC Off Switch
            • Notes
            • ASC Off Switch Operation And Their Respective Controls
        • Actuator
          • Hydraulic Unit
          • TCL/ASC Indicator And ASC Off Indicator
            • Notes
            • TCL/ASC Indicator
            • ASC Off Indicator
            • TCL/ASC Indicator, ASC Off Indicator And Their Operation Pattern
          • TCL/ASC-Ecu
          • System Configuration
          • Overview Of Control
        • Example Of ASC Operation
        • Example Of The Effect Of Control
        • Integrated Control
        • Example Of Operation Of TCL
        • Fail-Safe And Diagnostic Functions
      • TCL/ASC Diagnosis
        • Introduction To TCL/ASC Diagnosis
          • Notes
          • TCL/ASC Diagnostic Trouble Code Detection Conditions
        • TCL/ASC Diagnostic Troubleshooting Strategy
        • Diagnostic Function
          • On-Board Diagnostics
          • How To Connect The Scan Tool (M.U.T.-III)
          • How To Read And Erase Diagnostic Trouble Codes
          • How To Read Data List
          • How To Perform Actuator Test
          • How To Diagnose The Can Bus Line
        • Diagnostic Trouble Code Chart
        • Diagnostic Trouble Code Procedures
          • Wheel speed DTC C1200: FR wheel SPD. SNSR. malfunction
            • Notes
            • Circuit Operation
            • TCL/ASC DTC Set Conditions
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
              • Current trouble
              • Past trouble
            • Diagnosis
          • DTC C1201: FR wheel SPD. SNSR. invalid signal
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
              • Current trouble
              • Past trouble
            • Diagnosis
          • DTC C1205: FL wheel SPD. SNSR. malfunction
            • Notes
            • Circuit Operation
            • TCL/ASC DTC Set Conditions
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
              • Current trouble
              • Past trouble
            • Diagnosis
          • DTC C1206: FL wheel SPD. SNSR. invalid signal
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
              • Current trouble
              • Past trouble
            • Diagnosis
          • DTC C1210: RR wheel SPD. SNSR. malfunction
            • Notes
            • Circuit Operation
            • TCL/ASC DTC Set Conditions
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
              • Current trouble
              • Past trouble
            • Diagnosis
          • DTC C1211: RR wheel SPD. SNSR. invalid signal
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
              • Current trouble
              • Past trouble
            • Diagnosis
          • DTC C1215: RL wheel SPD. SNSR. malfunction
            • Notes
            • Circuit Operation
            • TCL/ASC DTC Set Conditions
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
              • Current trouble
              • Past trouble
            • Diagnosis
          • DTC C1216: RL wheel SPD. SNSR. invalid signal
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
              • Current trouble
              • Past trouble
            • Diagnosis
          • DTC C1226: FR inlet valve; DTC C1231: FR outlet valve; DTC C1236: FL inlet valve; DTC C1241: FL outlet valve; DTC C1246: RR inlet valve; DTC C1251: RR outlet valve; DTC C1256: RL inlet valve; DTC C1261: RL outlet valve; DTC C1300: FR cut valve; DTC C1305: FR suction valve; DTC C1310: FL cut valve; DTC C1315: FL suction valve
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • TROUBLESHOOTING HINTS (The most likely causes for these DTCs are to set are:)
              • Current trouble
              • Past trouble
            • Diagnosis
          • DTC C1271: Motor drive circuit
            • Notes
            • Circuit Operation
            • TCL/ASC DTC Set Conditions
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
              • Current trouble
              • Past Trouble
            • Diagnosis
          • DTC C1276: Valve Power Supply Circuit
            • Notes
            • Circuit Operation
            • TCL/ASC DTC Set Conditions
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
              • Current trouble
              • Past Trouble
            • Diagnosis
          • DTC C1340: Stoplight switch
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
              • Current trouble
              • Past Trouble
            • Diagnosis
          • DTC C1361: M/C pressure SNSR. stuck/low gain; DTC C1364: M/C pressure SNSR. malfunction
            • Notes
            • Circuit Operation
            • TCL/ASC DTC Set Conditions
            • TROUBLESHOOTING HINTS (The most likely causes for these DTCs are to set are:)
            • Diagnosis
          • DTC C1366: Lateral G SNSR. stuck/low gain; DTC C1371: Yaw rate SNSR. stuck/low gain; DTC C1377: Communication error G and yaw rate SNSR.; DTC C1864: G and yaw rate SNSR. power supply voltage
            • Notes
            • Circuit Operation
            • TCL/ASC DTC Set Conditions
              • Notes
              • DTC C1366: Lateral G SNSR. stuck/low gain (seizure or abnormal output signal)
              • DTC C1371: Yaw rate SNSR. stuck/low gain (seizure, abnormal output signal or oscillation)
              • DTC C1377: Communication error G and yaw rate SNSR. (seizure or abnormal output signal)
              • DTC C1864: G and yaw rate SNSR. power supply voltage (abnormal output or poor performance)
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
              • Current trouble
              • Past Trouble
            • Diagnosis
          • DTC C1394: INCOMP. learn neutral (SAS)
            • Notes
            • DTC Set Conditions
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Diagnosis
          • DTC C1395: INCOMP. Brake fluid filling
            • Notes
            • TCL/ASC DTC Set Conditions
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Diagnosis
          • DTC C1505: Steering angle sensor (detected by ASC side); DTC C1506: Steering angle sensor error (detected by itself)
            • Notes
            • Circuit Operation
            • TCL/ASC DTC Set Conditions
              • Notes
              • DTC C1505: Steering Angle Sensor (signal seizure or abnormal neutral point)
              • DTC C1506: Steering Angle Sensor (abnormal steering angle)
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
              • Current trouble
              • Past Trouble
            • Diagnosis
          • DTC C1607: ECU failure
            • Notes
            • TCL/ASC DTC Set Conditions
            • TROUBLESHOOTING HINTS (The most likely causes for these DTCs are to set are:)
            • Diagnosis
          • DTC C1640: Coding not completed
            • Notes
            • TCL/ASC DTC Set Conditions
            • TROUBLESHOOTING HINTS (The most likely causes for these DTCs are to set are:)
            • Diagnosis
          • DTC C1641: Coding not completed
            • Notes
            • TCL/ASC DTC Set Conditions
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Diagnosis
          • DTC C1860: Abnormality in battery voltage (high voltage); DTC C1861: Abnormality in battery voltage (low voltage)
            • Notes
            • Circuit Operation
            • TCL/ASC DTC Set Conditions
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
              • Current trouble
              • Past Trouble
            • Diagnosis
          • DTC U1073: Bus off
            • Notes
            • Trouble Judgment
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Diagnosis
          • DTC U1100: CAN Communications System Time Out Error Engine Related Data
            • Notes
            • DTC Set Condition
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Diagnosis
          • DTC U1101: CAN Communications System Time Out Error A/T Related Data
            • Notes
            • DTC Set Condition
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Diagnosis
          • DTC U1104: SAS CAN Timeout/Not equipped
            • Notes
            • Circuit Operation
            • TCL/ASC DTC Set Conditions
              • Current trouble
              • Past trouble
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Diagnosis
          • DTC U1120: CAN Communications System TCL Uncontrollable by Engine Malfunction
            • Notes
            • DTC Set Condition
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Diagnosis
        • Diagnostic Trouble Code Procedures
          • DTC C1551: Hall-IC output voltage; DTC C1552: Hall-IC output pattern; DTC C1553: Optical sensor; DTC C1554: Speed sensor is out of range; DTC C1555: Steering angle SNS. out of range; DTC C1608: EEPROM failure
            • Notes
            • Circuit Operation
            • TCL/ASC DTC Set Conditions
              • Notes
              • DTC C1551: Hall-IC output voltage
              • DTC C1552: Hall-IC output pattern
              • DTC C1553: Optical sensor
              • DTC C1554: Speed sensor is out of range
              • DTC C1555: Steering angle SNS. out of range
              • DTC C1608: EEPROM failure
            • TROUBLESHOOTING HINTS (The most likely causes for these DTCs are to set are:)
            • Diagnosis
          • DTC U1073: Bus off
            • Notes
            • Trouble Judgment
            • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Diagnosis
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Communication between Scan Tool and the TCL/ASC-ECU is not possible
            • Notes
            • Technical Description (Comment)
            • TROUBLESHOOTING HINTS (The most likely causes for this case:)
            • Diagnosis
          • INSPECTION PROCEDURE 2: Communication between Scan Tool and the steering wheel sensor is not possible
            • Notes
            • Technical Description (Comment)
            • TROUBLESHOOTING HINTS (The most likely causes for this case:)
            • Diagnosis
          • INSPECTION PROCEDURE 3: TCL/ASC-ECU power supply circuit system
            • Notes
            • Circuit Operation
            • Troubleshooting Hints (The Most Likely Causes For This Case:)
            • Diagnosis
          • INSPECTION PROCEDURE 4: Steering wheel sensor power supply circuit system
            • Notes
            • Circuit Operation
            • Troubleshooting Hints (The Most Likely Causes For This Case:)
            • Diagnosis
          • INSPECTION PROCEDURE 5: When the Ignition Switch is Turned to the "ON" Position (Engine Stopped), the "ASC OFF" Indicator does not Illuminate; INSPECTION PROCEDURE 6: When the Ignition Switch is Turned to the "ON" Position (Engine Stopped), the TCL/ASC Work Indicator does not Illuminate; INSPECTION PROCEDURE 7: The "ASC OFF" Indicator Remains Illuminated After the Engine is Started; INSPECTION PROCEDURE 8: The TCL/ASC Work Indicator Remains Illuminated After the Engine is Started
            • Notes
            • Circuit Operation
            • Comment
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 9: When the ASC OFF Switch is Push On, ASC does not be Cancelled
            • Notes
            • Circuit Operation
            • Comment
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 10: TCL/ASC System dose not Operate
            • Comment
            • TROUBLESHOOTING HINTS (The most likely causes for this case:)
            • Diagnosis
        • Data List Reference Table
        • Actuator Test Reference Table
          • Notes
          • Actuator Test Specifications
        • Check At TCL/ASC-Ecu
          • Terminal Voltage Check Chart
          • Resistance And Continuity Between Harness-Side Connector Terminals
      • Special Tools
      • On-Vehicle Service
        • Wheel Speed Sensor Output Voltage Measurement
        • Hydraulic Unit Check
        • In The Event Of A Discharged Battery
        • G And Yaw Rate Sensor Calibration
        • Steering Wheel Sensor Calibration
        • Brake Fluid Pressure Sensor Calibration
      • Hydraulic Unit
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> TCL/ASC-Ecu Harness Connector Disconnection
            • <<B>> Hydraulic Unit (Integrated With TCL/ASC-Ecu) Removal
          • Installation Service Point
            • >>A<< Brake Tube Connection
      • Wheel Speed Sensor
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Front Wheel Speed Sensor/Rear Wheel Speed Sensor Removal
        • Inspection
          • Wheel Speed Sensor Check
          • Toothed Wheel Speed Rotor Check
      • ASC Off Switch
        • Removal And Installation
        • Inspection
          • ASC Off Switch Continuity Check
      • G And Yaw Rate Sensor
        • Removal And Installation
      • Steering Wheel Sensor
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Steering Wheel Sensor Neutral Point Alignment
      • Specifications
        • Fastener Tightening Specification
        • Service Specifications
  • Mechanical - Hydraulic
    • Basic Disc Brake System
      • General Description
        • Notes
        • Features
          • Improved braking performance
          • Improved stability
          • Improved serviceability
        • Construction Diagram
      • Basic Brake System Diagnosis
        • Introduction To Basic Brake System Diagnosis
        • Basic Brake System Diagnostic Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Vehicle Pulls to One Side when Brakes are Applied
            • Diagnosis
          • INSPECTION PROCEDURE 2: Insufficient Braking Power
            • Diagnosis
          • INSPECTION PROCEDURE 3: Increased Pedal Stroke (Reduced Pedal-to-Floor Board Clearance)
            • Diagnosis
          • INSPECTION PROCEDURE 4: Brake Drag
            • Diagnosis
          • INSPECTION PROCEDURE 5: Scraping or Grinding Noise when Brakes are Applied
            • Diagnosis
          • INSPECTION PROCEDURE 6: Squealing, Groaning or Chattering Noise when Brakes are Applied
            • Diagnosis
          • INSPECTION PROCEDURE 7: Squealing Noise when Brakes are not Applied
            • Diagnosis
          • INSPECTION PROCEDURE 8: Groaning, Clicking or Rattling Noise when Brakes are not Applied
            • Diagnosis
      • Special Tools
      • On-Vehicle Service
        • Brake Pedal Check And Adjustment
          • Notes
          • Brake Pedal Height
          • Brake Pedal Free Play
          • Clearance Between Brake Pedal And Dash Panel
        • Brake Booster Operating Test
        • Check Valve Operation Check
        • Bleeding
          • Notes
          • Master Cylinder Bleeding
          • Brake Line Bleeding
        • Brake Fluid Level Sensor Check
        • Disc Brake Pad Check
        • Brake Pad Replacement
          • Notes
          • Front
          • Rear
        • Brake Disc Check
          • Notes
          • Brake Disc Thickness Check
          • Brake Disc Thickness Unevenness Check And Correction
          • Brake Disc Run-Out Check And Correction
        • Brake Drag Force Check
      • Brake Pedal
        • Removal And Installation
        • Inspection
          • Stoplight Switch Check
      • Master Cylinder Assembly And Brake Booster Assembly
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Brake Booster Vacuum Hose Connection
      • Disc Brake Assembly
        • Removal And Installation
        • Inspection
          • Brake Disc Check
          • Notes
          • Pad Wear Check
        • Disassembly And Assembly
          • Notes
          • Lubrication Points
          • Disassembly Service Points
            • Notes
            • <<A>> Caliper Piston/Piston Boot Removal
            • <<B>> Piston Seal Removal
        • Disassembly And Assembly
          • Notes
          • Lubrication Points
          • Disassembly Service Points
            • Notes
            • <<A>> Piston Boot/Caliper Piston Removal
            • <<B>> Piston Seal Removal
          • Assembly Service Point
            • >>A<< Rear Brake Pin Installation
      • Specifications
        • Fastener Tightening Specifications
        • General Specifications
        • Service Specifications
        • Lubricants
  • Parking Brake System
    • General Description
      • Notes
      • Construction Diagram
    • Parking Brake Diagnosis
      • Introduction
      • Troubleshooting Strategy
      • Symptom Chart
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: Insufficient Parking Brake Function
          • Diagnosis
        • INSPECTION PROCEDURE 2: When the Parking Brake Lever is Pulled, the Brake Warning Light does not Illuminate
          • Notes
          • Technical Description (Comment)
          • Troubleshooting Hints (The Most Likely Causes For This Case:)
          • Diagnosis
        • INSPECTION PROCEDURE 3: When the Parking Brake Lever is Released, the Brake Warning Light does not Turn Off
          • Notes
          • Technical Description (Comment)
          • Troubleshooting Hints (The Most Likely Causes For This Case:)
          • Diagnosis
    • On-Vehicle Service
      • Parking Brake Lever Stroke Check And Adjustment
      • Parking Brake Switch Check
      • Parking Brake Lining Seating Procedure
    • Parking Brake Lever
      • Removal And Installation
    • Installation Service Point
      • >>A<< Rear Parking Brake Cable Installation
    • Parking Brake Cable
      • Removal And Installation
    • Parking Brake Lining And Drum
      • Removal And Installation
        • Notes
        • Removal Service Points
          • <<A>> Rear Brake Bolt/Rear Brake Caliper Assembly Removal
          • <<B>> Rear Brake Disc Removal
          • <<C>> Rear Brake Chamber Retainer Removal
        • Installation Service Points
          • >>A<< Rear Brake Chamber Retainer Installation
          • >>B<< Rear Brake Shoe Slack Adjuster Installation
          • >>C<< Shoe-To-Anchor Spring Installation
      • Inspection
        • Parking Brake Lining And Brake Drum Check
    • Specifications
      • Fastener Tightening Specifications
      • Service Specifications
      • Lubricant
  • Traction Control/Active Stability Control System
    • General Description
      • Notes
      • Construction Diagram
      • System Configuration Diagram
      • System Check Sound
      • TCL/ASC Operation Sounds And Sensations
      • Sensor
        • G And Yaw Rate Sensor
        • Steering Wheel Sensor
        • ASC Off Switch
          • Notes
          • ASC Off Switch Operation And Their Respective Controls
      • Actuator
        • Hydraulic Unit
        • TCL/ASC Indicator And ASC Off Indicator
          • Notes
          • TCL/ASC Indicator
          • ASC Off Indicator
          • TCL/ASC Indicator, ASC Off Indicator And Their Operation Pattern
        • TCL/ASC-Ecu
        • System Configuration
        • Overview Of Control
      • Example Of ASC Operation
      • Example Of The Effect Of Control
      • Integrated Control
      • Example Of Operation Of TCL
      • Fail-Safe And Diagnostic Functions
    • TCL/ASC Diagnosis
      • Introduction To TCL/ASC Diagnosis
        • Notes
        • TCL/ASC Diagnostic Trouble Code Detection Conditions
      • TCL/ASC Diagnostic Troubleshooting Strategy
      • Diagnostic Function
        • On-Board Diagnostics
        • How To Connect The Scan Tool (M.U.T.-III)
        • How To Read And Erase Diagnostic Trouble Codes
        • How To Read Data List
        • How To Perform Actuator Test
        • How To Diagnose The Can Bus Line
      • Diagnostic Trouble Code Chart
      • Diagnostic Trouble Code Procedures
        • Wheel speed DTC C1200: FR wheel SPD. SNSR. malfunction
          • Notes
          • Circuit Operation
          • TCL/ASC DTC Set Conditions
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Current trouble
            • Past trouble
          • Diagnosis
        • DTC C1201: FR wheel SPD. SNSR. invalid signal
          • Notes
          • Circuit Operation
          • DTC Set Conditions
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Current trouble
            • Past trouble
          • Diagnosis
        • DTC C1205: FL wheel SPD. SNSR. malfunction
          • Notes
          • Circuit Operation
          • TCL/ASC DTC Set Conditions
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Current trouble
            • Past trouble
          • Diagnosis
        • DTC C1206: FL wheel SPD. SNSR. invalid signal
          • Notes
          • Circuit Operation
          • DTC Set Conditions
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Current trouble
            • Past trouble
          • Diagnosis
        • DTC C1210: RR wheel SPD. SNSR. malfunction
          • Notes
          • Circuit Operation
          • TCL/ASC DTC Set Conditions
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Current trouble
            • Past trouble
          • Diagnosis
        • DTC C1211: RR wheel SPD. SNSR. invalid signal
          • Notes
          • Circuit Operation
          • DTC Set Conditions
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Current trouble
            • Past trouble
          • Diagnosis
        • DTC C1215: RL wheel SPD. SNSR. malfunction
          • Notes
          • Circuit Operation
          • TCL/ASC DTC Set Conditions
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Current trouble
            • Past trouble
          • Diagnosis
        • DTC C1216: RL wheel SPD. SNSR. invalid signal
          • Notes
          • Circuit Operation
          • DTC Set Conditions
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Current trouble
            • Past trouble
          • Diagnosis
        • DTC C1226: FR inlet valve; DTC C1231: FR outlet valve; DTC C1236: FL inlet valve; DTC C1241: FL outlet valve; DTC C1246: RR inlet valve; DTC C1251: RR outlet valve; DTC C1256: RL inlet valve; DTC C1261: RL outlet valve; DTC C1300: FR cut valve; DTC C1305: FR suction valve; DTC C1310: FL cut valve; DTC C1315: FL suction valve
          • Notes
          • Circuit Operation
          • DTC Set Conditions
          • TROUBLESHOOTING HINTS (The most likely causes for these DTCs are to set are:)
            • Current trouble
            • Past trouble
          • Diagnosis
        • DTC C1271: Motor drive circuit
          • Notes
          • Circuit Operation
          • TCL/ASC DTC Set Conditions
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Current trouble
            • Past Trouble
          • Diagnosis
        • DTC C1276: Valve Power Supply Circuit
          • Notes
          • Circuit Operation
          • TCL/ASC DTC Set Conditions
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Current trouble
            • Past Trouble
          • Diagnosis
        • DTC C1340: Stoplight switch
          • Notes
          • Circuit Operation
          • DTC Set Conditions
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Current trouble
            • Past Trouble
          • Diagnosis
        • DTC C1361: M/C pressure SNSR. stuck/low gain; DTC C1364: M/C pressure SNSR. malfunction
          • Notes
          • Circuit Operation
          • TCL/ASC DTC Set Conditions
          • TROUBLESHOOTING HINTS (The most likely causes for these DTCs are to set are:)
          • Diagnosis
        • DTC C1366: Lateral G SNSR. stuck/low gain; DTC C1371: Yaw rate SNSR. stuck/low gain; DTC C1377: Communication error G and yaw rate SNSR.; DTC C1864: G and yaw rate SNSR. power supply voltage
          • Notes
          • Circuit Operation
          • TCL/ASC DTC Set Conditions
            • Notes
            • DTC C1366: Lateral G SNSR. stuck/low gain (seizure or abnormal output signal)
            • DTC C1371: Yaw rate SNSR. stuck/low gain (seizure, abnormal output signal or oscillation)
            • DTC C1377: Communication error G and yaw rate SNSR. (seizure or abnormal output signal)
            • DTC C1864: G and yaw rate SNSR. power supply voltage (abnormal output or poor performance)
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Current trouble
            • Past Trouble
          • Diagnosis
        • DTC C1394: INCOMP. learn neutral (SAS)
          • Notes
          • DTC Set Conditions
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
          • Diagnosis
        • DTC C1395: INCOMP. Brake fluid filling
          • Notes
          • TCL/ASC DTC Set Conditions
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
          • Diagnosis
        • DTC C1505: Steering angle sensor (detected by ASC side); DTC C1506: Steering angle sensor error (detected by itself)
          • Notes
          • Circuit Operation
          • TCL/ASC DTC Set Conditions
            • Notes
            • DTC C1505: Steering Angle Sensor (signal seizure or abnormal neutral point)
            • DTC C1506: Steering Angle Sensor (abnormal steering angle)
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Current trouble
            • Past Trouble
          • Diagnosis
        • DTC C1607: ECU failure
          • Notes
          • TCL/ASC DTC Set Conditions
          • TROUBLESHOOTING HINTS (The most likely causes for these DTCs are to set are:)
          • Diagnosis
        • DTC C1640: Coding not completed
          • Notes
          • TCL/ASC DTC Set Conditions
          • TROUBLESHOOTING HINTS (The most likely causes for these DTCs are to set are:)
          • Diagnosis
        • DTC C1641: Coding not completed
          • Notes
          • TCL/ASC DTC Set Conditions
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
          • Diagnosis
        • DTC C1860: Abnormality in battery voltage (high voltage); DTC C1861: Abnormality in battery voltage (low voltage)
          • Notes
          • Circuit Operation
          • TCL/ASC DTC Set Conditions
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
            • Current trouble
            • Past Trouble
          • Diagnosis
        • DTC U1073: Bus off
          • Notes
          • Trouble Judgment
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
          • Diagnosis
        • DTC U1100: CAN Communications System Time Out Error Engine Related Data
          • Notes
          • DTC Set Condition
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
          • Diagnosis
        • DTC U1101: CAN Communications System Time Out Error A/T Related Data
          • Notes
          • DTC Set Condition
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
          • Diagnosis
        • DTC U1104: SAS CAN Timeout/Not equipped
          • Notes
          • Circuit Operation
          • TCL/ASC DTC Set Conditions
            • Current trouble
            • Past trouble
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
          • Diagnosis
        • DTC U1120: CAN Communications System TCL Uncontrollable by Engine Malfunction
          • Notes
          • DTC Set Condition
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
          • Diagnosis
      • Diagnostic Trouble Code Procedures
        • DTC C1551: Hall-IC output voltage; DTC C1552: Hall-IC output pattern; DTC C1553: Optical sensor; DTC C1554: Speed sensor is out of range; DTC C1555: Steering angle SNS. out of range; DTC C1608: EEPROM failure
          • Notes
          • Circuit Operation
          • TCL/ASC DTC Set Conditions
            • Notes
            • DTC C1551: Hall-IC output voltage
            • DTC C1552: Hall-IC output pattern
            • DTC C1553: Optical sensor
            • DTC C1554: Speed sensor is out of range
            • DTC C1555: Steering angle SNS. out of range
            • DTC C1608: EEPROM failure
          • TROUBLESHOOTING HINTS (The most likely causes for these DTCs are to set are:)
          • Diagnosis
        • DTC U1073: Bus off
          • Notes
          • Trouble Judgment
          • Troubleshooting Hints (The Most Likely Causes For These DTCS Are To Set Are:)
          • Diagnosis
      • Symptom Chart
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: Communication between Scan Tool and the TCL/ASC-ECU is not possible
          • Notes
          • Technical Description (Comment)
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 2: Communication between Scan Tool and the steering wheel sensor is not possible
          • Notes
          • Technical Description (Comment)
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 3: TCL/ASC-ECU power supply circuit system
          • Notes
          • Circuit Operation
          • Troubleshooting Hints (The Most Likely Causes For This Case:)
          • Diagnosis
        • INSPECTION PROCEDURE 4: Steering wheel sensor power supply circuit system
          • Notes
          • Circuit Operation
          • Troubleshooting Hints (The Most Likely Causes For This Case:)
          • Diagnosis
        • INSPECTION PROCEDURE 5: When the Ignition Switch is Turned to the "ON" Position (Engine Stopped), the "ASC OFF" Indicator does not Illuminate; INSPECTION PROCEDURE 6: When the Ignition Switch is Turned to the "ON" Position (Engine Stopped), the TCL/ASC Work Indicator does not Illuminate; INSPECTION PROCEDURE 7: The "ASC OFF" Indicator Remains Illuminated After the Engine is Started; INSPECTION PROCEDURE 8: The TCL/ASC Work Indicator Remains Illuminated After the Engine is Started
          • Notes
          • Circuit Operation
          • Comment
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 9: When the ASC OFF Switch is Push On, ASC does not be Cancelled
          • Notes
          • Circuit Operation
          • Comment
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 10: TCL/ASC System dose not Operate
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
      • Data List Reference Table
      • Actuator Test Reference Table
        • Notes
        • Actuator Test Specifications
      • Check At TCL/ASC-Ecu
        • Terminal Voltage Check Chart
        • Resistance And Continuity Between Harness-Side Connector Terminals
    • Special Tools
    • On-Vehicle Service
      • Wheel Speed Sensor Output Voltage Measurement
      • Hydraulic Unit Check
      • In The Event Of A Discharged Battery
      • G And Yaw Rate Sensor Calibration
      • Steering Wheel Sensor Calibration
      • Brake Fluid Pressure Sensor Calibration
    • Hydraulic Unit
      • Removal And Installation
        • Notes
        • Removal Service Points
          • <<A>> TCL/ASC-Ecu Harness Connector Disconnection
          • <<B>> Hydraulic Unit (Integrated With TCL/ASC-Ecu) Removal
        • Installation Service Point
          • >>A<< Brake Tube Connection
    • Wheel Speed Sensor
      • Removal And Installation
        • Notes
        • Removal Service Point
          • <<A>> Front Wheel Speed Sensor/Rear Wheel Speed Sensor Removal
      • Inspection
        • Wheel Speed Sensor Check
        • Toothed Wheel Speed Rotor Check
    • ASC Off Switch
      • Removal And Installation
      • Inspection
        • ASC Off Switch Continuity Check
    • G And Yaw Rate Sensor
      • Removal And Installation
    • Steering Wheel Sensor
      • Removal And Installation
        • Notes
        • Installation Service Point
          • >>A<< Steering Wheel Sensor Neutral Point Alignment
    • Specifications
      • Fastener Tightening Specification
      • Service Specifications
• Drivelines & Axles
  • Axle Shafts
    • Front Axle
      • General Description
        • Notes
        • Construction Diagram
      • Front Axle Diagnosis
        • Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Noise during Wheel Rotation
            • Diagnosis
          • INSPECTION PROCEDURE 2: Noise Due to Excessive Play of Wheel in Turning Direction
            • Diagnosis
      • Special Tools
      • On-Vehicle Service
        • Wheel Bearing End Play Check
        • Hub Bolt Replacement
      • Front Axle Hub Assembly
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Driveshaft Nut Removal
            • <<B>> Caliper Assembly Removal
            • <<C>> Brake Disc Removal
            • <<D>> Self Locking Nut (Connection For Lower Arm Ball Joint And Tie Rod End) Removal
            • <<E>> Front Wheel Hub Assembly Removal
          • Installation Service Point
            • >>A<< Washer/Driveshaft Nut Installation
        • Inspection
          • Notes
          • Wheel Bearing Rotation Starting Torque And End Play Check
      • Driveshaft Assembly
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Driveshaft Nut Removal
            • <<B>> Self Locking Nut (Lower Arm Ball Joint/Tie Rod End Connection) Removal
            • <<C>> Driveshaft Assembly/Driveshaft And Inner Shaft Assembly <3.8L Engine-RH> Removal
          • Installation Service Points
            • >>A<< Driveshaft And Inner Shaft Assembly <3.8L Engine-RH>/Driveshaft Installation
            • >>B<< Driveshaft Nut Installation
        • Disassembly And Assembly <2.4L Engine>
          • Notes
          • Lubrication Points
          • Disassembly Service Points
            • <<A>> TJ Case/Spider Assembly Removal
            • <<B>> TJ Boot Removal
          • Assembly Service Points
            • >>A<< Dynamic Damper <LH/RH>/Damper Band <RH>/TJ Boot Installation
            • >>B<< Spider Assembly Installation
            • >>C<< TJ Case Installation
            • >>D<< TJ Boot Band (Small)/TJ Boot Band (Large) Installation
        • Disassembly And Assembly <3.8L Engine>
          • Notes
          • Lubrication Points
          • Disassembly Service Points
            • <<A>> PTJ Case/Inner Shaft Assembly Removal
            • <<B>> Seal Plate Removal
            • <<C>> PTJ Case Removal
            • <<D>> Inner Shaft Removal
            • <<E>> Center Bearing Removal
            • <<F>> PTJ Boot Removal
          • Assembly Service Points
            • >>A<< EBJ Boot Installation
            • >>B<< Dynamic Damper/Damper Band Installation
            • >>C<< PTJ Boot Installation
            • >>D<< Spider Assembly Installation
            • >>E<< Center Bearing Installation
            • >>F<< Dust Seal Inner/Dust Seal Outer Installation
            • >>G<< Inner Shaft Installation
            • >>H<< PTJ Case Installation
            • >>I<< Seal Plate Installation
            • >>J<< PTJ Case And Inner Shaft Assembly Installation
            • >>K<< PTJ Boot Band (Small)/PTJ Boot Band (Large) Installation
        • Inspection
        • BJ/EBJ Boot Replacement
      • Specifications
        • Fastener Tightening Specifications
        • General Specifications
        • Service Specifications
        • Lubricants
  • Wheel Hubs
    • Rear Axle
      • General Description
        • Notes
        • Construction Diagram
      • Rear Axle Diagnosis
        • Introduction To Rear Axle Diagnosis
        • Rear Axle Diagnostic Troubleshooting Strategy
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Abnormal Noise
            • Diagnosis
      • Special Tools
      • On-Vehicle Service
        • Wheel Bearing End Play Check
        • Rear Hub Rotary-Sliding Resistance Check
        • Hub Bolt Replacement
        • Rear Suspension Bushing Replacement
      • Rear Axle Hub Assembly
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Caliper Assembly Removal
            • <<B>> Brake Disc Removal
        • Inspection
      • Knuckle
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Self Locking Nut (Toe Control Arm Connection) Removal
        • Inspection
      • Specifications
        • Fastener Tightening Specifications
        • Service Specifications
• Electrical
  • Body Electrical
    • Battery
      • On-Vehicle Service
        • Battery Check
          • Notes
          • Battery Visual Inspection (1)
          • Battery Visual Inspection (2)
        • Battery Charging
          • Notes
          • Charge Rate
            • Notes
            • Charge Rate Chart
        • Battery Test
          • Battery Testing Procedure
          • Load Test Rate Chart
          • Load Test Chart
    • Connector End Views - 2.4L
      • Connector End Views
        • Interlock Switch Connector End View (C-101)
        • Convertible Top Control Module Connector End View (D-45)
        • SRS-ECU Connector End View (C-122)
        • Clockspring Connector End View (C-302, C-303, C-306)
        • Intermediate Connector (D-30) And Rear Dome Light Connector End View (D-06)
        • Blower Motor Connector End View (C-116)
        • Door Switch (RH) Connector End View (D-01) (Eclipse Spyder)
        • Door Lock Actuator (RH) Connector End View (E-05)
        • Power Window Sub Switch Connector End View (E-06)
        • AUX Adapter (C-139) And AUX Box Connector End View (C-138)
        • Passenger's Air Bag Module Connector End View (C-112)
        • Solenoid Valve (Tonneau Drive Cylinder) Connector End View (F-25)
        • Fuel Level Sensor Connector End View (D-10) (Eclipse)
        • Torque Converter Clutch Solenoid Valve Connector End View (B-111-4)
        • Intermediate Connector (C-21) Connector End View
        • Ignition Switch Connector End View (C-308)
        • Heated Seat Switch Connector End View
        • Heater Air Intake Duct Sensor Connector End View (C-105)
        • Rear Window Defogger Relay Connector End View
        • Radio Switch (LH) (C-311) And Clock Spring (C-303) Connector End View
        • PCM Connector End View
        • Remote Controlled Mirror (LH) Connector End View (E-12)
        • Joint Connector (C-01) Connector End View
        • Key Reminder Switch Connector End View (C-310)
        • Interphone Microphone Connector End View (D-51) (Eclipse)
        • Intermediate Connector (C-29) Connector End View
        • Front Dome Light Connector End View (D-03 And D-04)
        • Power Window Motor Connector End View (E-03)
        • Side-Airbag Module (LH) Connector End View (D-23)
        • Windshield Washer Motor Connector End View (A-33)
        • Clutch Pedal Position Switch Connector End View (C-129)
        • Front Impact Sensor (LH) Connector End View (A-21)
        • Injector Connector End View (B-01, B-03, B-26 And B-29)
        • Front Combination Light (LH) Connector End View (A-17)
        • Microphone Switch Connector End View
        • Knock Sensor Connector End View (B-126)
        • Power Window Motor (LH) Connector End View (E-16)
        • Side-Marker Light (LH) Connector End View (A-39)
        • Power Window Motor Connector End View (D-37)
        • Intermediate Connector (C-26) Connector End View
        • Headlight (LH) Connector End View (A-18)
        • Junction Block Connector (C-202 And C-209) Connector End View
        • Engine Oil Pressure Switch Connector End View (B-33)
        • Condenser Fan Motor Connector End View (A-29)
        • Horn Relay Connector End View (A-08X)
        • Ambient Air Temperature Sensor Connector End View (A-27)
        • Front Dome Light Connector End View (D-50)
        • Blower Switch Connector End View
        • Rear Height, Front Height And Slide Motor Connector End View
        • Rear Combination Light (LH) Connector End View (F-14) (Eclipse)
        • ASC OFF Switch Connector End View (C-133)
        • Radiator Fan Relay Connector End View
        • Door Speaker (LH) Connector End View (E-13)
        • Door Lock Actuator (LH) Connector End View (E-11)
        • Passenger Seat Belt Warning Light Connector End View (C-07)
        • A/T Control Relay Connector End View (B-15X)
        • Tweeter (LH) Connector End View (C-130)
        • Security Indicator Connector End View (C-02)
        • TCL/ASC-ECU Connector End View (A-02, A-03, A-38)
        • Front-ECU Connector End View (A-14X)
        • Luggage Compartment Light Connector End View (D-09)
        • A/C Pressure Sensor Connector End View (A-34)
        • Intermediate Connector (C-27) Connector End View
        • Steering Wheel Sensor Connector End View (C-312)
        • Junction Block Connector End View (C-202 And C-216)
        • Trunk Lid Latch Switch Connector End View (F-09)
        • Front Wheel Speed Sensor (LH) Connector End View (A-06)
        • Interphone Microphone Connector End View (D-51) (Eclipse Spyder)
        • Front Turn-Signal Light (LH) Connector End View (A-40)
        • Backup Light Switch Connector End View (B-114)
        • Quarter Window Regulator Motor Connector End View
        • Intermediate Connector (C-25) Connector End View
        • Potentiometer Connector End View (C-104)
        • TPMS Receiver Connector End View (C-121)
        • Tonneau Sensor Connector End View
        • Outside/Inside Air Selection Damper Control Motor Connector End View (C-108)
        • Side Impact Sensor (RH) Connector End View (D-33)
        • Clock Spring Side Air Bag Module Connector End View (C-305)
        • Inside Rear View Mirror Assembly Connector End View (D-49) (Eclipse)
        • Door Switch (LH) Connector End View (D-15) (Eclipse Spyder)
        • SRS-ECU Connector End View (C-122, C-123, C-124)
        • License Plate Light Connector End View (F-10) (Eclipse)
        • Front Fog Light Switch (C-127) Or Front Fog Light ASC Off Switch Connector End View (C-136)
        • Convertible Top Control Module Connector End View (F-27)
        • ETACS-ECU Connector End View (C-217, C-218, C-219)
        • Sunroof Switch Connector End View (D-32)
        • Rear Combination Light (RH) Connector End View (F-07) (Eclipse)
        • Fuel Tank Differential Pressure Sensor Connector End View (D-18)
        • Remote Controlled Mirror (RH) Connector End View (E-01)
        • Convertible Top Control Module Connector End View (F-26)
        • Starter Relay Connector End View (B-11X)
        • Underdrive Solenoid Valve Connector End View (B-111-1)
        • Joint Connector (C-03) Connector End View
        • Radiator Fan Motor Connector End View
        • Fuel Level Sensor (Main) Connector End View (D-19)
        • Woofer Connector End View (D-12) (Eclipse Spyder)
        • Door Switch (RH) Connector End View (D-01) (Eclipse)
        • Cylinder (1, 4) Heated Oxygen Sensor (Front) Connector End View (B-36)
        • Solenoid Valve Connector End View (F-18)
        • Rear Window Defogger Connector End View (F-04) (Eclipse)
        • Rear Window Defogger Connector End View (F-04) (Eclipse Spyder)
        • 5-Bow Sensor Connector End View (F-16)
        • Front-ECU Connector End View (A-13X)
        • Hazard Warning Light Switch Connector End View (C-08)
        • Brake Fluid Level Switch Connector End View (A-04)
        • Joint Connector (C-28) Connector End View
        • Air Thermo Sensor Connector End View (C-102)
        • Headlight Assembly (RH) Connector End View (A-42)
        • Intermediate Connector (C-11) Connector End View
        • (Cylinder 1, 4) Heated Oxygen Sensor (Rear) Connector End View (B-37)
        • Radio And CD Player Connector End View (C-117)
        • Evaporative Emission Ventilation Solenoid Connector End View (F-13)
        • Windshield Wiper Motor Connector End View (A-05)
        • Blower Switch Connector End View (C-116 And C-106)
        • Evaporative Emission Purge Solenoid Connector End View (B-05)
        • Column Switch Connector End View (C-309)
        • Convertible Top Control Module Connector End View (F-22, F-26 And F-27)
        • Fan Control Relay Connector End View (A-12X)
        • Quarter Speaker (RH) Connector End View (D-05) (Eclipse Spyder)
        • Headlight Assembly (LH) Connector End View (A-41)
        • Camshaft Position Sensor Connector End View (B-110)
        • Satellite Radio Tuner Connector End View (D-48) (Eclipse)
        • Engine Coolant Temperature Sensor Connector End View (B-106)
        • Front Fog Light Relay Connector End View (A-07X)
        • SRS-ECU Connector End View (C-123)
        • Ambient Air Temperature Sensor Connector End View (A-28)
        • Quarter Speaker (LH) Connector End View (D-14) (Eclipse Spyder)
        • Passenger's Seat Belt Pre-Tensioner Connector End View (D-34)
        • Parking And Side-Marker Light (RH) Connector End View (A-44)
        • License Plate Light Connector End View (F-10) (Eclipse Spyder)
        • Door Speaker (RH) Connector End View (E-07)
        • Amplifier (C-114 & C-115), CD Changer (C-117 & C-119) And CD Player Connector End View (C-118)
        • Rear Wheel Speed Sensor RH Connector End View (F-08) (Eclipse)
        • Fuel Level Sensor Connector End View (D-10) (Eclipse Spyder)
        • Windshield Wiper And Windshield Washer Switch Connector End View
        • Power Window Switch Connector End View
        • Shift Switch Assembly Connector End View (C-17)
        • Rear Wheel Speed Sensor RH Connector End View (F-08) (Eclipse Spyder)
        • Curtain Air Bag Module (RH) Connector End View (D-08)
        • Horn (Low) Connector End View (A-23)
        • (Cylinder 2, 3) Heated Oxygen Sensor (Rear) Connector End View (B-34)
        • Rear Wheel Speed Sensor LH Connector End View (F-12) (Eclipse Spyder)
        • Curtain Air Bag Module (Squib) (LH) Connector End View (D-11)
        • Crankshaft Position Sensor Connector End View (B-125)
        • Passenger Air Bag Off Indicator Light Connector End View (C-05)
        • (Cylinder 2, 3) Heated Oxygen Sensor (Front) Connector End View (B-35)
        • Windshield Washer Motor Connector End View
        • Convertible Top Switch Connector End View (C-30)
        • Liftgate Switch Connector End View
        • Clock Spring (C-303) And Remote Controlled Radio Switch (RH) Connector End View (C-301)
        • A/C-ECU Connector End View (C-20)
        • A/C Compressor Clutch Relay Connector End View (B-17X)
        • ETACS-ECU Connector End View (C-219)
        • G And Yaw Rate Sensor Connector End View (C-32)
        • Accelerator Pedal Position Sensor Connector End View (C-22)
        • Front Impact Sensor (RH) Connector End View (A-30)
        • Hood Switch Connector End View (A-37)
        • Short Stroke Switch (LH) Connector End View (E-18)
        • Fuel Pump Module Connector End View (D-19) (Eclipse)
        • Sunroof-ECU Connector End View (D-35)
        • Front-ECU Connector End View (A-13X, A-14X)
        • Door Switch Connector End View
        • Windshield And Rear Washer Motor Connector End View (A-32)
        • Side-Airbag Module (RH) Connector End View (D-28)
        • Hands Free Module Connector End View (C-35)
        • Multi-Center Display Unit Connector End View (C-06)
        • Rear Combination Light (LH) Connector End View (F-14) (Eclipse Spyder)
        • Reduction Solenoid Valve Connector End View (B-111-6)
        • TCL Switch Connector End View
        • Front Fog Light (RH) Connector End View (A-31)
        • Ignition Coil Connector End View (B-101, B-102, B-121 Or B-122)
        • Remote Controlled Radio Switch Connector End View
        • Combination Meter Connector End View (C-101)
        • Manifold Absolute Pressure Sensor Connector End View (B-02)
        • A/C-ECU Connector End View (C-14)
        • Rear Window Defogger Connector End View (F-01) (Eclipse)
        • Intermediate Connector (A-15) Connector End View
        • Front Seat Belt Retractor Connector End View (D-17)
        • A/C-ECU Connector End View (C-15, C-20)
        • CD Changer Connector End View (C-119)
        • Door Switch (LH) Connector End View (D-15) (Eclipse)
        • Clock Spring Connector End View (C-307 And C-305)
        • Short Stroke Switch (RH) Connector End View (E-17)
        • Convertible Top Control Module Connector End View (D-46)
        • Inside Rear View Mirror Assembly Connector End View (D-49) (Eclipse Spyder)
        • Headlight Leveling Switch Connector End View
        • Power Transistor Connector End View (C-107)
        • Potentiometer Connector End View (C-109)
        • Liftgate Lock Release Handle Connector End View (F-06)
        • TPMS Receiver Connector End View (C-211)
        • A/T Control Solenoid Valve Connector End View
        • Power Window Main Switch Connector End View (E-14)
        • Engine Oil Control Valve Connector End View (B-32)
        • Rear View Camera Connector End View (F-34) (Eclipse)
        • Intermediate Connector (C-09) Connector End View
        • ECM (M/T) Or PCM (A/T) Connector End View (B-22)
        • Parking Brake Switch Connector End View (C-16)
        • MFI Relay Connector End View (B-16X)
        • Tweeter (RH) (C-110) And Radio And CD Player Connector End View (C-117)
        • Power Window Relay Connector End View (C-207)
        • Rear Wiper Motor Connector End View (F-03)
        • Wheel Speed Sensor Connector End View
        • Fuel Pump Module Connector End View (D-19) (Eclipse Spyder)
        • Variable Intermittent Wiper Control Switch Connector End View
        • Transmission Range Switch Connector End View
        • Intermediate Connector (C-09) And Audio Amplifier Connector End View (C-114)
        • Junction Block Connector (C-208) Connector End View
        • Rear Window Defogger Relay Connector End View (C-205)
        • Remote Controlled Radio Switch Connector End View (RH)
        • Rear Combination Light (RH) Connector End View (F-07) (Eclipse Spyder)
        • Overdrive Solenoid Valve Connector End View (B-111-3)
        • Convertible Top Control Module (D-45) And Tonneau Sensor Connector End View (D-39)
        • Sunroof Motor Assembly Connector End View (D-35)
        • Intermediate Connector (C-24) Connector End View
        • Liftgate Lock Actuator Connector End View (F-11)
        • Front Fog Light (LH) Connector End View (A-24)
        • Intermediate Connector (C-10) Connector End View
        • Occupant Classification ECU Connector End View (D-26)
        • A/C-ECU Connector End View (C-15)
        • Fuel Pump Relay (1) Connector End View (C-214)
        • ETACS-ECU Connector End View (C-218)
        • Rear Wheel Speed Sensor LH Connector End View (F-12) (Eclipse)
        • PCM Connector End View (B-19)
        • Auto-Cruise Control Switch Connector End View (C-302)
        • ECM Connector End View (B-21)
        • Power Window Sub Switch Connector End View (E-08)
        • Rear View Camera Connector End View (F-34) (Eclipse Spyder)
        • Throttle Actuator Control Motor Relay Connector End View (B-13X)
        • Quarter Speaker (RH) Connector End View (D-05) (Eclipse)
        • Inside Rear View Mirror Assembly Connector End View (D-04)
        • Throttle Actuator Control Motor Connector End View (B-06)
        • Fuel Pump Relay (2) Connector End View (C-212)
        • Blower Switch Connector End View (C-12)
        • Stoplight Switch Connector End View (C-103)
        • EGR Valve Connector End View (B-105)
        • Seat Slide Sensor Connector End View (D-24)
        • Condenser Fan Relay Connector End View (A-19X)
        • Tweeter (LH) Connector End View (C-131)
        • 5-Bow Sensor (F-16 & F-22) And Convertible Top Control Module Connector End View (F-27)
        • Convertible Top Relay Connector End View (D-44)
        • Power Seat Switch Connector End View
        • Intake Air Temperature Sensor Connector End View
        • A/C-ECU Connector End View (C-19)
        • Combination Meter Connector End View (C-04)
        • Horn (High) Connector End View (A-25)
        • Input Shaft Speed Sensor Connector End View (B-112)
        • Satellite Radio Tuner Connector End View (D-48) (Eclipse Spyder)
        • ECM And PCM Connector End View
        • Power Steering Pressure Switch Connector End View (B-30)
        • 5-Bow Sensor Connector End View (F-22)
        • Mass Airflow Sensor Connector End View (B-09)
        • ECM Or PCM Connector End View (B-20)
        • Backup Light Switch Connector End View
        • Second Solenoid Valve Connector End View (B-111-2)
        • Blower Relay Connector End View
        • Convertible Top Motor Connector End View (D-41)
        • TPMS Receiver Connector End View (C-133)
        • Low-Reverse Solenoid Valve Connector End View (B-111-5)
        • Headlight (RH) Connector End View (A-35)
        • ECM Connector End View (B-18)
        • Clock Spring Connector End View (D-306)
        • Data Link Connector End View (C-125)
        • Junction Block Connector (C-203) Connector End View
        • Rear Window Defogger Connector End View (F-01) (Eclipse Spyder)
        • Intermediate Connector (C-23) Connector End View
        • Front Turn-Signal Light (RH) Connector End View (A-43)
        • SRS-ECU Connector End View
        • Junction Block Connector (C-215) Connector End View
        • Convertible Top Position Switch Connector End View (F-29)
        • ETACS-ECU Connector End View (C-217)
        • Output Shaft Speed Sensor Connector End View (B-108)
        • Quarter Speaker (LH) Connector End View (D-14) (Eclipse)
        • A/C-ECU Connector End View (C-14 Or C-15)
        • Control Solenoid Valve Assembly Connector End View (B-111)
        • Front Combination Light (RH) Connector End View (A-36)
        • Transmission Range Switch Connector End View (B-113)
        • Vehicle Speed Sensor Connector End View (B-104)
        • Hands Free Module Connector End View (C-34)
        • SRS-ECU Connector End View (C-124)
        • Liftgate Lock Release Handle Connector End View
        • Front Wheel Speed Sensor RH Connector End View (A-01)
        • Lighting Switch And Windshield Wiper Switch Connector End View
        • Seat Belt Switch (Driver's Side) Connector End View (D-22)
        • Tonneau Latch Switch Connector End View (F-28)
        • Woofer Connector End View (D-12) (Eclipse)
        • Fan Control Module Connector End View (A-22)
        • Door Mirror Control Switch Connector End View
        • Passenger's Seat Belt Switch Connector End View (D-25)
        • Generator Connector End View (B-120)
        • Driver Seat Belt Pre-Tensioner Connector End View (D-16)
        • 5-Bow Sensor (UP) Connector End View (F-23)
        • Tweeter (RH) (C-111) And CD Changer Connector End View (C-117)
    • General - Electrical
      • Harness Connector Inspection
        • Connector Continuity And Voltage Test
        • Improper Terminal Engagement Check
        • Connector Terminal Engagement And Disengagement
        • Computer Connector
        • Round Waterproof Connector
        • Rectangular Waterproof Connector
        • Injector Connector
      • How To Diagnose
        • How To Diagnose
        • Troubleshooting Steps
        • Information For Diagnosis
        • Inspection
        • Inspection Instruments
        • Checking Fuses
          • Notes
          • Cautions In Event Of Blown Fuse
        • Checking Switches
        • Checking Relays
        • Cables And Wires Check
        • Battery Handling
        • General Electrical System Check
    • OEM Circuit Diagrams
      • How To Read Circuit Diagrams
        • Notes
        • Connector/Grounding Indications
        • Symbols (Except Connector And Grounding)
        • Wire Color Codes
      • Junction Block
      • Joint Connector
      • Centralized Junction
        • Fusible Link And Fuse
        • Centralized Relay
      • Power Distribution System <Eclipse (Vehicles With Halogen Type Headlight)>
      • Power Distribution System <Eclipse (Vehicles With Discharge Type Headlight)>
      • Power Distribution System <Eclipse SPYDER (Vehicles With Halogen Type Headlight)>
      • Power Distribution System <Eclipse SPYDER (Vehicles With Discharge Type Headlight)>
      • Starting System <M/T>
      • Starting System <A/T>
      • Ignition System <2.4L Engine>
      • Ignition System <3.8L Engine>
      • Charging System
      • MULTIPORT Fuel Injection (MFI) System <2.4L Engine-M/T>
      • MULTIPORT Fuel Injection (MFI) System <2.4L Engine-A/T>
      • MULTIPORT Fuel Injection (MFI) System <3.8L Engine-M/T>
      • MULTIPORT Fuel Injection (MFI) System <3.8L Engine-A/T>
      • Cooling System <2.4L Engine>
      • Cooling System <3.8L Engine>
      • INVECS-II 4A/T <2.4L Engine (Vehicles With Halogen Type Headlight)>
      • INVECS-II 4A/T <2.4L Engine (Vehicles With Discharge Type Headlight)>
      • INVECS-II 5A/T <3.8L Engine>
      • Headlight <Halogen Type>
      • Headlight <Discharge Type>
      • Headlight Leveling System
      • Taillight, Position Light And License Plate Light <Vehicles With Halogen Type Headlight>
      • Taillight, Position Light And License Plate Light <Vehicles With Discharge Type Headlight>
      • Fog Light <Vehicles With Halogen Type Headlight>
      • Fog Light <Vehicles With Discharge Type Headlight>
      • Front Dome Light, Rear Dome Light, Luggage Compartment Light And Ignition Key Hole Illumination Light <Eclipse>
      • Front Dome Light And Ignition Key Hole Illumination Light <Eclipse SPYDER>
      • Glove Box Light
      • Vanity Mirror Light
      • Turn-Signal Light And Hazard Warning Light <Vehicles With Halogen Type Headlight>
      • Turn-Signal Light And Hazard Warning Light <Vehicles With Discharge Type Headlight>
      • Backup Light <M/T>
      • Backup Light <A/T>
      • Stoplight
      • Horn
      • Meter And Gauge <M/T (Vehicles With Halogen Type Headlight)>
      • Meter And Gauge <M/T (Vehicles With Discharge Type Headlight)>
      • Meter And Gauge <A/T (Vehicles With Halogen Type Headlight)>
      • Meter And Gauge <A/T (Vehicles With Discharge Type Headlight)>
      • Brake Warning Light, Oil Pressure Warning Light, Fuel Warning Light
      • Power Windows <Eclipse>
      • Power Windows <Eclipse SPYDER>
      • Central Door Locking System <Eclipse>
      • Central Door Locking System <Eclipse SPYDER>
      • Manual Air Conditioning System <2.4L Engine (Vehicles With Halogen Type Headlight)>
      • Manual Air Conditioning System <2.4L Engine (Vehicles With Discharge Type Headlight)>
      • Automatic Air Conditioning System <3.8L Engine>
      • Windshield Wiper And Washer <Eclipse-M/T>
      • Windshield Wiper And Washer <Eclipse-A/T>
      • Windshield Wiper And Washer <Eclipse SPYDER-M/T>
      • Windshield Wiper And Washer <Eclipse SPYDER-A/T>
      • Rear Wiper And Washer <M/T>
      • Rear Wiper And Washer <A/T>
      • Rear Window Defogger And Door Mirror Heater <Eclipse (Vehicles With Halogen Type Headlight)>
      • Rear Window Defogger And Door Mirror Heater <Eclipse (Vehicles With Discharge Type Headlight)>
      • Rear Window Defogger And Door Mirror Heater <Eclipse SPYDER (Vehicles With Halogen Type Headlight)>
      • Rear Window Defogger And Door Mirror Heater <Eclipse SPYDER (Vehicles With Discharge Type Headlight)>
      • Remote Controlled Mirror
      • Automatic Anti-Dazzling Mirror
      • Audio System <Vehicles Without Audio Amplifier>
      • Audio System <Vehicles With Audio Amplifier (Eclipse)>
      • Audio System <Vehicles With Audio Amplifier (Eclipse SPYDER)>
      • Accessory Socket
      • Multi-Center Display
      • Sunroof
      • Auto-Cruise Control System <2.4L Engine-M/T>
      • Auto-Cruise Control System <2.4L Engine-A/T>
      • Auto-Cruise Control System <3.8L Engine-M/T>
      • Auto-Cruise Control System <3.8L Engine-A/T>
      • Electronic Brake-Force Distribution (EBD), Anti-Lock Braking System (Abs) And Active Stability Control System (ASC) <Vehicles With Halogen Type Headlight>
      • Electronic Brake-Force Distribution (EBD), Anti-Lock Braking System (Abs) And Active Stability Control System (ASC) <Vehicles With Discharge Type Headlight>
      • Engine Immobilizer System <2.4L Engine-M/T>
      • Engine Immobilizer System <2.4L Engine-A/T>
      • Engine Immobilizer System <3.8L Engine-M/T>
      • Engine Immobilizer System <3.8L Engine-A/T>
      • Supplemental Restraint System (SRS) <Vehicles With Halogen Type Headlight>
      • Supplemental Restraint System (SRS) <Vehicles With Discharge Type Headlight>
      • Power Seat
      • Heated Seat <Vehicles With Halogen Type Headlight>
      • Heated Seat <Vehicles With Discharge Type Headlight>
      • Theft-Alarm System
      • Tire Pressure Monitoring System (TPMS)
      • Hands-Free Cellular Phone System
      • Rear View Camera
      • Forgotten Key Prevention Function
      • Lighting Monitor Tone Alarm
      • Ignition Key Reminder Tone Alarm
      • Seat Belt Warning Tone Alarm
      • Door Ajar Warning Tone Alarm <M/T>
      • Door Ajar Warning Tone Alarm <A/T>
      • Spare Connector (For Remote Controlled Engine Starter) <A/T>
      • Controller Area Network (Can) <2.4L Engine-M/T>
      • Controller Area Network (Can) <2.4L Engine-A/T>
      • Controller Area Network (Can) <3.8L Engine-M/T>
      • Controller Area Network (Can) <3.8L Engine-A/T>
      • Convertible Top
    • OEM Splice Locations
      • How To Read Splice Locations
      • Index
      • Engine Compartment
      • Engine And Transaxle <2.4L Engine>
      • Engine And Transaxle <3.8L Engine>
      • Dash Panel
      • Floor And Roof <Eclipse>
      • Floor And Roof <Eclipse SPYDER>
      • Door
      • Luggage Compartment <Eclipse>
      • Luggage Compartment <Eclipse SPYDER>
    • OEM Wiring Harness Routing
      • Overall Configuration Diagram <Eclipse>
      • Overall Configuration Diagram <Eclipse SPYDER>
      • How To Read Configuration Diagrams
      • Engine Compartment
      • Engine And Transaxle <2.4L Engine>
      • Engine And Transaxle <3.8L Engine>
      • Dash Panel
      • Floor And Roof <Eclipse>
      • Floor And Roof <Eclipse SPYDER>
      • Door
      • Luggage Compartment <Eclipse>
      • Luggage Compartment <Eclipse SPYDER>
    • Simplified Wiring System (SWS)
      • General Information
        • Communication Method
        • Operation
          • Tone Alarm Function
            • Ignition Key Reminder Tone Alarm Function
            • Light Reminder Tone Alarm Function
            • Seat Belt Tone Alarm Function
            • Door Ajar Tone Alarm Function
          • Central Door Locking System
            • Central Door Locking System Operation
            • Forgotten Key Prevention Function
          • Power Window Relay Control
            • Power Window Relay Operation
            • Power Window Timer Function
          • Keyless Entry System
            • Keyless Entry Hazard Answer Back Function
            • Keyless Entry Horn Answer Back Function
            • Liftgate Unlock Function <Eclipse>
            • Trunk Lid Unlock Function <Eclipse SPYDER>
            • Timed Locking Mechanism
          • Sunroof Control
            • Sunroof Timer Function
          • Windshield Wiper And Washer
            • Low-Speed Wiper, High-Speed Wiper Control
            • Intermittent Control
            • Mist Wiper Control
            • Washer Control
          • Rear Wiper And Washer
            • Intermittent Control (Basic Control)
            • "R" Position-Linked Control
            • Rear Washer Control
          • Headlight
            • Headlight Automatic Shutdown Function
            • High-Beam Indicator
            • Daytime Running Light Function
          • Flasher Timer
            • Turn-Signal Light
            • Hazard Warning Light
            • Turn-Signal Indicators
          • Front Fog Light
            • Front Fog Light
            • Front Fog Light Indicator
            • Interior Light
            • Interior Light Automatic Shutdown Function
            • Seat Belt Indicator
            • Door-Ajar Indicator Light
            • Ignition Key Cylinder Illumination Function
      • Special Tools
      • SWS Diagnosis
        • General Information
          • Before Carrying Out Troubleshooting
        • Diagnostic Function
          • On-Board Diagnostics
          • How To Connect The Scan Tool (M.U.T.-III)
          • How To Read And Erase Diagnostic Trouble Codes
          • How To Diagnose The Can Bus Lines
        • SWS Diagnostic Troubleshooting Strategy
        • How To Connect SWS Monitor
        • How To Use SWS Monitor
        • How To Check Ecus
        • Service Data Check
          • Notes
          • • Notes
            • Column-Ecu
              • Notes
              • ETACS
              • Front-ECU, Power window, Sunroof
            • • Notes
              • Wiper
              • Rear Wiper
              • Lighting
              • Turn Signal
              • Buzzer
              • Sunroof
              • Pulse Check
      • Diagnostic Trouble Code Chart
      • Diagnostic Trouble Code Procedures
        • DTC U1700: Malfunction in the SWS communication line
          • Notes
          • Trouble Judgment
            • Notes
            • Technical Description (Comment)
              • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1701: Communication error in the column switch
          • Notes
          • Trouble Judgment
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1702: Communication error in the front-ECU
          • Notes
          • Trouble Judgment
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
            • Troubleshooting Hints
          • Diagnosis
        • DTC U1703: Communication error in the sunroof-ECU or the sunroof not installed
          • Notes
          • Trouble Judgment
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1073: Bus off
          • Notes
          • Trouble Judgment
          • Technical Description (Comment)
            • Notes
            • Troubleshooting Hints
            • Diagnosis
        • DTC U1100: ECM or PCM time-out (related to engine); DTC U1101: ECM or PCM time-out (related to transaxle)
          • Notes
          • Trouble Judgment
            • DTC U1100
            • DTC U1101
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1108: Combination meter time-out
          • Notes
          • Trouble Judgment
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1110: A/C-ECU time-out
          • Notes
          • Trouble Judgment
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1128: Failure information on combination meter
          • Notes
          • Trouble Judgment
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
      • Symptom Chart
        • Ecu Communication System
        • Function System
      • Input Signal Chart
        • SWS Monitor
        • Scan Tool Or Voltmeter
      • Symptom Procedures
        • INSPECTION PROCEDURE A-1: Communication with the SWS monitor kit is not possible
          • Notes
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE A-2: Communication with the column switch (column-ECU) is not possible
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
          • INSPECTION PROCEDURE A-3: Communication with the ETACS-ECU is not possible
        • INSPECTION PROCEDURE A-4: Communication with the front-ECU is not possible
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE A-5: Communication with the sunroof-ECU is not possible
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • Tone Alarm
          • General Description Concerning The Tone Alarm
            • Notes
            • Tone Alarm
              • Ignition Key Reminder Tone Alarm Function
              • Light Reminder Tone Alarm Function
              • Seat belt tone alarm function
              • Door Ajar Tone Alarm Function
          • INSPECTION PROCEDURE B-1: Tone Alarm: Ignition key reminder tone alarm function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE B-2: Tone Alarm: Light reminder tone alarm function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE B-3: Tone Alarm: Seat belt tone alarm function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE B-4: Tone Alarm: Door ajar tone alarm function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Central Door Locking System
          • General Description Concerning Central Door Locking System
            • Notes
            • Central Door Locking System
              • Door Locking Or Unlocking By Operating The Driver's Or Passenger's Door Lock Switch
              • Forgotten key prevention function
          • INSPECTION PROCEDURE C-1: Central Door Locking System: The central door locking system does not work at all
            • Notes
            • Circuit Operation
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE C-2: Central Door Locking System: Some doors do not lock or unlock
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE C-3: Central Door Locking System: None of the doors lock and unlock with just the door lock switch operation
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE C-4: Central Door Locking System: None of the doors lock and unlock with just the driver's or passenger's inside lock knob operation
            • Notes
            • Technical Description
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE C-5: Central Door Locking System: Forgotten key prevention function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Power Windows
          • General Description Concerning The Power Windows
            • Notes
            • Power Window
              • Power Window Timer Function
          • INSPECTION PROCEDURE D-1: Power Windows: Power windows do not work at all
            • Notes
            • Circuit Operation
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE D-2: Power Window: The power window timer function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE D-3: Power Window: Only the door window (LH) does not work by operating the power window main switch
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE D-4: Power Window: Power window (RH) does not work normally by operating the power window sub switch
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE D-5: Power Window: Power window (RH) does not work normally by operating the power window main switch
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Keyless Entry System
          • General Description Concerning The Keyless Entry System
            • Notes
            • Keyless Entry System
              • Keyless Entry Hazard Answer Back Function
              • Keyless Entry Horn Answer Back Function
              • Liftgate Unlock Function
              • Timed Locking Mechanism
          • INSPECTION PROCEDURE E-1: Keyless Entry System: Keyless entry system does not operate
            • Notes
            • Circuit Operation
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE E-2: Keyless Entry System: The dome light, the turn-signal lights and the horn do not operate through the answer back function
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE E-3: Keyless Entry System: Encrypted code cannot be registered
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE E-4: Keyless Entry System: The liftgate or trunk lid is not opened when the keyless entry transmitter "LIFTGATE" button or "TRUNK LID" button is operated
            • Notes
            • Circuit Operation
            • Troubleshooting Hints
            • Diagnosis
        • Sunroof
          • General Description Concerning The Sunroof
            • Notes
            • Sunroof
              • Sunroof Timer Function
          • INSPECTION PROCEDURE F-1: Sunroof: Sunroof does not operate
            • Notes
            • Circuit Operation
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE F-2: Sunroof: Any of the sunroof switch positions is defective
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE F-3: Sunroof: Sunroof timer function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Windshield Wiper And Washer
          • General Description Concerning The Windshield Wiper And Washer
            • Notes
            • Windshield Wiper And Washer
              • Intermittent Control (Vehicle Speed-Dependent Variable Type)
              • Mist wiper control
              • Low-speed wiper, high-speed wiper control
              • Washer control
          • INSPECTION PROCEDURE G-1: Windshield Wiper and Washer: The windshield wipers do not work at all
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE G-2: Windshield Wiper and Washer: The windshield wipers do not work when the windshield wiper switch is at "INT" or "MIST" position or the windshield washer switch is at "ON" position. However, the wipers work at low speed when the windshield wiper switch is at "LO" or "HI."
          • Technical Description (Comment)
            • Notes
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE G-3: Windshield Wiper and Washer: Either of the windshield wiper switch positions are defective
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE G-4: Windshield Wiper and Washer: Windshield wipers does not stop at the predetermined park position
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE G-5: Windshield Wiper and Washer: The windshield intermittent wiper interval cannot be adjusted by using the variable intermittent wiper control switch
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE G-6: Windshield Wiper and Washer: The windshield intermittent wiper interval is not changed according to the vehicle speed
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE G-7: Windshield Wiper and Washer: The windshield washer does not work
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Rear Wiper And Washer
          • General Description Concerning The Rear Wiper And Washer
            • Notes
            • Rear Wiper And Washer
              • Rear wiper control
              • Rear washer control
          • INSPECTION PROCEDURE H-1: Rear Wiper and Washer: Rear wiper does not work at all
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE H-2: Rear Wiper and Washer: Rear wiper does not stop at the predetermined park position
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE H-3: Rear Wiper and Washer: When the selector lever is moved to "R" position during the rear wiper operation, the rear wiper does not operate at the continuous mode
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE H-4: Rear Wiper and Washer: Rear washer does not operate
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Headlight And Taillight
          • General Description Concerning The Headlights And Taillights
            • Notes
            • Headlights And Taillights
              • Taillights
              • Headlights
              • Headlight Automatic-Shutoff Function
              • High-Beam Indicator
              • Daytime running light function
          • INSPECTION PROCEDURE I-1: Headlight and Taillight: None of the taillight illuminate normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-2: Headlight and Taillight: None of the headlight (low-beam) illuminate normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-3: Headlight and Taillight: The headlights (high-beam) do not Illuminate normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-4: Headlight and Taillight: When the passing switch is turned "ON," the headlights (low-beam or high-beam) do not illuminate
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-5: Headlight and Taillight: Headlights do not illuminate when the lighting switch is at "TAIL," and "PASSING" position, but illuminate at low-beam when the switch is at "HEAD" position. At this position, the headlights cannot be changed to high beam by operating the dimmer switch
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-6: Headlight and Taillight: The taillights, the front parking lights or the license plate light do not illuminate.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-6: Headlight and Taillight: The taillights, the front parking lights or the license plate light do not illuminate.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-7: Headlight and Taillight: One of the headlights does not illuminate.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-7: Headlight and Taillight: One of the headlights does not illuminate.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-8: Headlight and Taillight: The high-beam indicator light does not illuminate
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-9: Headlight and Taillight: Headlight automatic shutoff function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-10: Headlight and Taillight: Headlight dimmer switch automatic resetting function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hint
            • Diagnosis
          • INSPECTION PROCEDURE I-11: Headlight and Taillight: Daytime running light function does not work normally
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Flasher Timer
          • General Description Concerning The Flasher Timer
            • Notes
            • Flasher Timer
              • Turn-Signal Light
              • Hazard Warning Light
              • Turn-Signal Indicators
          • INSPECTION PROCEDURE J-1: Flasher Timer: Turn-signal lights do not flash when the turn-signal light switch is turned on
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE J-2: Flasher Timer: Hazard warning lights do not flash when the hazard warning light switch is turned on
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE J-3: Flasher Timer: One of the turn-signal lights does not illuminate.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE J-3: Flasher Timer: One of the turn-signal lights does not illuminate.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE J-4: Flasher Timer: The turn-signal light indicator does not illuminate normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Fog Light
          • General Description Concerning The Front Fog Lights
            • Notes
            • Front Fog Light
              • Front fog light
            • Front Fog Light Indicator
          • INSPECTION PROCEDURE K-1: Front fog light: Front fog lights do not illuminate when the front fog light switch is turned on
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE K-2: Front fog Light: Front fog lights do not go out when the headlights (low-beam) are turned off while the front fog lights are on
            • Technical Description (Comment)
            • Troubleshooting Hint
            • Diagnosis
          • INSPECTION PROCEDURE K-3: Front fog Light: One of the front fog lights does not illuminate
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE K-4: Front fog light: The front fog light indicator does not illuminate normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Interior Light
          • General Description Concerning The Interior Light
            • Notes
            • Interior Light
              • Interior Light Control
              • Interior light automatic-shutoff function
              • Seat belt indicator
              • Door Ajar Indicator
              • Ignition Key Cylinder Illumination Function
          • INSPECTION PROCEDURE L-1: Interior Light: The dome lights do not illuminate and go out normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE L-2: Interior Light: The front dome light or rear dome light does not illuminate or go out normally.
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE L-2: Interior Light: The dome light does not illuminate or go out normally.
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE L-3: Interior Light: The luggage compartment light does not illuminate or go out normally.
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE L-4: Interior light: Dome light dimming function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE L-5: Interior Light: The ignition key hole illumination light does not illuminate or go out normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE L-6: Interior Light: The interior light automatic shutoff function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE L-7: Interior Light: The door ajar indicator lights do not illuminate or go out normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE L-8: Interior Light: The seat belt warning light does not illuminate or go out normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Theft-Alarm System
          • General Description Concerning The Theft-Alarm System
            • Notes
            • Theft-Alarm System
              • Armed Stage
              • Disarmed Stage
              • Alarm Stage
              • Type Of Alarm
              • Alarm Deactivation
              • Testing The Theft-Alarm System
          • INSPECTION PROCEDURE O-1: Theft-alarm System: Theft-alarm system is not armed (theft-alarm indicator does not illuminate)
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE O-2: Theft-alarm System: The theft-alarm system is not armed
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE O-3: Theft-alarm System: Horn does not sound when the theft-alarm system is triggered
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE O-4: Theft-alarm System: Headlights (high-beam) do not flash when the theft-alarm system is triggered
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE O-5: Theft-alarm System: Panic alarm function does not work
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
      • Input Signal Procedures
        • INSPECTION PROCEDURE M-1: ETACS-ECU does not receive any signal from the ignition switch (ACC)
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE M-2: ETACS-ECU does not receive any signal from the ignition switch (IG1)
          • Notes
          • Circuit Operation
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE M-3: ETACS-ECU does not receive any signal from the front fog light switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
            • Notes
            • Diagnosis
        • INSPECTION PROCEDURE M-4: ETACS-ECU does not receive "R" position signal from the backup light switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE M-5: ETACS-ECU does not receive one of signals from the door switches
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE M-6: Column Switch: ETACS-ECU does not receive any signal from the taillight switch, the headlight switch, the passing light switch, the dimmer switch or the turn-signal light switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE M-7: Column switch: ETACS-ECU does not receive any signal from the windshield mist wiper switch, the windshield intermittent wiper switch, the windshield low-speed wiper switch, the windshield high-speed wiper switch, the rear wiper switch, the windshield washer switch or the rear washer switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE M-8: Column Switch: ETACS-ECU does not receive any signal from the variable intermittent wiper control switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE M-9: Sunroof Switch: ETACS-ECU does not receive any signal from the up, open or close/down switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
          • INSPECTION PROCEDURE N-1: ETACS-ECU does not receive any signal from the key reminder switch
        • INSPECTION PROCEDURE N-2: ETACS-ECU does not receive any signal from the hazard warning light switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE N-3: ETACS-ECU does not receive one of signals from the door lock actuators
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE N-4: ETACS-ECU does not receive one of signals from the door lock switch (incorporated in the power window main switch and power window sub switch)
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE N-5: ETACS-ECU does not receive any signal from the liftgate latch switch.
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE N-5: ETACS-ECU does not receive any signal from the trunk lid latch switch.
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE N-6: ETACS-ECU does not receive any signal from the liftgate lock release handle.
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE N-7: Transmitter: ETACS-ECU does not receive any signal from the lock, unlock, liftgate , trunk lid or panic switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE N-8: ETACS-ECU does not receive any interior light loaded signal
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
          • INSPECTION PROCEDURE N-9: ETACS-ECU does not receive an auto-stop signal from the rear wiper motor
        • INSPECTION PROCEDURE N-10: ETACS-ECU does not receive any signal from hood switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
      • Check At Ecu Terminal
        • ETACS-Ecu
        • Column Switch
        • Front-Ecu
        • Sunroof-Ecu
  • Charging Systems
    • Charging System
      • General Description
        • Notes
        • Operation
      • Charging System Diagnosis
        • Troubleshooting Hints
        • Troubleshooting Guide
      • Special Tool
      • On-Vehicle Service
        • Generator Output Line Voltage Drop Test
        • Output Current Test
        • Regulated Voltage Test
          • Notes
          • Voltage Regulation Table
        • Wave Pattern Check Using An Oscilloscope
          • Measurement Method
          • Abnormal Waveforms Examples
      • Generator Assembly
        • Removal And Installation <2.4L Engine>
          • Notes
          • Removal Service Point
            • <<A>> Generator Assembly Removal
        • Removal And Installation <3.8L Engine>
          • Notes
          • Removal Service Points
            • <<A>> A/C Compressor And Clutch Assembly Removal
            • <<B>> Generator Assembly Removal
          • Installation Service Point
            • >>A<< Generator Assembly Installation
        • Disassembly And Assembly
          • <2.4L Engine>
          • <3.8L Engine>
          • Disassembly Service Points
            • <<A>> Front Bracket Assembly Removal
            • <<B>> Generator Pulley Removal
            • <<C>> Stator Removal
          • Assembly Service Points
            • >>A<< Regulator Assembly Installation
            • >>B<< Rotor Assembly Installation
        • Inspection
          • Rotor Check
          • Stator Check
          • Rectifier Check
          • Brush Check
    • Specifications (Chassis Electrical)
      • Fastener Tightening Specifications
      • Service Specifications
        • <Battery>
        • <Combination Meter>
        • <Headlight>
        • <Front Fog Light>
      • Lubricant
        • <Ignition Switch>
    • Specifications [Engine Electrical]
      • Fastener Tightening Specifications
        • <2.4L Engine>
        • <3.8L Engine>
      • General Specifications
        • <2.4L Engine>
        • <3.8L Engine>
      • Service Specifications
  • OEM Component Locations
    • Fusible Link, Fuse And IOD Or Storage Connector
    • Grounding Cable
    • Grounding
    • Inspection Terminal
    • Other Devices
    • Sensor
    • Control Unit
    • Solenoid And Solenoid Valve
    • Relay
  • Gauges
    • Combination Meter Assembly
      • General Description
      • Combination Meters Diagnosis
        • Diagnostic Troubleshooting Strategy
        • Diagnosis Function
          • How To Connect Scan Tool (M.U.T.-III)
          • How To Read And Erase Diagnostic Trouble Codes
          • How To Diagnose The Can Bus Lines
        • Diagnostic Trouble Code Chart
      • Diagnostic Trouble Code Procedures
        • DTC B1200: Defective odometer
          • Notes
          • Circuit Operation
          • DTC Set Condition
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • DTC B1201: Defective fuel gauge
          • Notes
          • Circuit Operation
          • DTC Set Condition
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1073: Bus off
          • Notes
          • Circuit Operation
          • DTC Set Condition
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1100: ECM or PCM time-out (related to engine)
          • Notes
          • DTC Set Condition
          • Technical Description (Comment)
            • Notes
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1101: PCM time-out (related to A/T)
          • Notes
          • DTC Set Condition
          • Technical Description (Comment)
            • Notes
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1102: TCL/ASC-ECU time-out
          • Notes
          • DTC Set Condition
          • Technical Description (Comment)
            • Notes
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1109: ETACS-ECU time-out
          • Notes
          • Circuit Operation
          • DTC Set Condition
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1112: SRS-ECU time-out
          • Notes
          • DTC Set Condition
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1114: TPMS-ECU time-out
          • Notes
          • DTC Set Condition
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1120: Failure information on ECM or PCM (related to engine)
          • Notes
          • DTC Set Condition
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1206: Flag invalid
          • Notes
          • Trouble Judgment
          • Comments On Trouble Symptom
            • Current trouble
            • Past trouble
          • Possible Causes
          • Diagnosis
        • DTC U1434: Failure information on TPMS-ECU
          • Notes
          • DTC Set Condition
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • Symptom Chart
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: Communication with scan tool is not possible
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 2: Power supply circuit.; INSPECTION PROCEDURE 3: Odometer and trip meter are not displayed.; INSPECTION PROCEDURE 4: No needle meters work.; INSPECTION PROCEDURE 5: When the ignition switch is turned to the ON position, the indicator and warning lights do not illuminate
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Possible Causes
          • Diagnosis
        • INSPECTION PROCEDURE 6: Speedometer does not work (other meters work); INSPECTION PROCEDURE 7: The fuel gauge needle moves excessively
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 8: Tachometer does not work (other meters work)
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 9: Fuel gauge does not work (other meters work)
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 10: Engine coolant temperature gauge does not work (other meters work)
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE 11: The Fuel Warning Light does not Illuminate or go out
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • Data List Reference Table
        • Actuator Test Reference Table
        • Combination Meter Terminal Check
      • Special Tools
      • On-Vehicle Service
        • Speedometer Check
        • Tachometer Check
        • Fuel Level Sensor Check
          • Fuel Level Sensor Resistance
          • Fuel Level Sensor Float Height
      • Combination Meter Assembly
        • Removal And Installation
        • Disassembly And Assembly
    • Interior Trim
      • General Description
        • Operation
          • Seat Belt Warning System
          • Rear View System
      • Seat Belt Diagnosis
      • Inside Rear View Mirror Diagnosis
        • Introduction To Inside Rear View Mirror Diagnosis
        • Inside Rear View Mirror Diagnostic Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: The Inside Rear View Mirror can not be Set to Night Mode
            • Notes
            • Function
            • Troubleshooting Hints
            • Diagnosis
      • On-Vehicle Service
        • Auto-Dimming Feature Test
      • Special Tool
      • Instrument Panel Assembly
        • Removal And Installation
        • Clip And Claw Positions
          • Notes
          • Removal Service Point
            • <<A>> Instrument Panel Under Cover Removal
            • <<B>> Connector Disconnection
            • <<C>> Instrument Panel Assembly Removal
        • Glove Box Lock Cylinder Disassembly And Assembly
          • Notes
          • Disassembly Service Point
            • <<A>> Tumbler Disassembly
          • Assembly Service Point
            • >>A<< Tumbler Assembly
        • Disassembly And Assembly
      • Floor Console Assembly
        • Removal And Installation
        • Disassembly And Assembly
          • Notes
          • Removal Service Point
            • <<A>> Accessory Socket (Battery) Case B
      • Trims
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Clip And Claw Position
            • <Eclipse>
            • <Eclipse SPYDER>
          • Removal Service Point
            • <<A>> Front Pillar Trim Removal
      • Door Trim
        • Removal And Installation
          • <Front Door Trim>
          • Removal Service Point
            • <<A>> Inside Handle Cover Removal
        • Disassembly And Assembly
          • <Front Door Trim>
      • Liftgate Trim
        • Removal And Installation
          • <Eclipse>
      • Headlining
        • Removal And Installation
          • <Eclipse>
          • Removal Service Point
            • <<A>> Headlining Assembly Removal
      • Inside Rear View Mirror
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Inside Rear View Mirror Removal
      • Front Seat Assembly
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Front Seat Assembly Installation
        • Inspection
          • Heated Seat Switch Check
            • Continuity Test Of Heated Seat Switch
          • Seat Cushion Heater Check
          • Seatback Heater Check
          • Heated Seat Relay Continuity Check
          • Power Seat Switch Continuity Check
          • Operation Check Of Power Seat Motor
        • Disassembly And Assembly
          • <Driver's Seat>
          • <Front Passenger's Seat>
          • Removal Service Points
            • <<A>> Seatback Panel Removal
            • <<B>> Seatback Panel Removal
      • Rear Seat Assembly
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Installation Service Points
            • <<A>> Installation Of Rear Seat Cushion Assembly
            • <<B>> Installation Of Rear Seatback Assembly <Eclipse SPYDER>
        • Disassembly And Assembly
          • <Eclipse>
          • <Eclipse SPYDER>
      • Front Seat Belt
        • Removal And Installation
          • Notes
          • <Eclipse SPYDER>
        • Inspection
          • Seat Belt Switch Continuity Check (Driver's Side)
      • Rear Seat Belt
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
      • Specifications
        • Fastener Tightening Specifications
        • Lubricant
          • <Instrument Panel>
    • Multi-Center Display
      • General Description
        • Notes
        • Precautions During Service
          • Diagnosis Tips Concerning The Entire System
          • Diagnosis Tips When Only Specific Function(S) Is Defective
      • Diagnosis
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: The multi-center display does not Show any Information
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 2: "-" (Ambient air temperature sensor error) is displayed on the ambient air temperature display.
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 3: The ambient air temperature display does not change normally.
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 4: On the Audio Screen, "E" cannot Proceed to Next Screen
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 5: The Compass can not be Calibrated Manually, or Goes Out of Calibration Easily.
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Check At Multi-Center Display Unit Terminal
      • Special Tools
      • On-Vehicle Service
        • Compass Calibration
          • One Turn Magnetic Compensation
          • Deflection Angle Compensation
            • Compass Calibration
            • Adjust For Compass Variance
        • Vehicle Magnetic Compensation
          • Demagnetization And Correction Method
      • Multi-Center Display
        • Removal And Installation
        • Disassembly And Assembly
    • Specifications (Chassis Electrical)
      • Fastener Tightening Specifications
      • Service Specifications
        • <Battery>
        • <Combination Meter>
        • <Headlight>
        • <Front Fog Light>
      • Lubricant
        • <Ignition Switch>
  • Horns
    • Horn System
      • Horn
        • Diagnosis
        • Horn
          • Removal And Installation
          • Inspection
            • Horn Relay Continuity Check
  • Motors, Switches, Relays
    • Battery
      • On-Vehicle Service
        • Battery Check
          • Notes
          • Battery Visual Inspection (1)
          • Battery Visual Inspection (2)
        • Battery Charging
          • Notes
          • Charge Rate
            • Notes
            • Charge Rate Chart
        • Battery Test
          • Battery Testing Procedure
          • Load Test Rate Chart
          • Load Test Chart
    • Connector End Views - 2.4L
      • Connector End Views
        • Interlock Switch Connector End View (C-101)
        • Convertible Top Control Module Connector End View (D-45)
        • SRS-ECU Connector End View (C-122)
        • Clockspring Connector End View (C-302, C-303, C-306)
        • Intermediate Connector (D-30) And Rear Dome Light Connector End View (D-06)
        • Blower Motor Connector End View (C-116)
        • Door Switch (RH) Connector End View (D-01) (Eclipse Spyder)
        • Door Lock Actuator (RH) Connector End View (E-05)
        • Power Window Sub Switch Connector End View (E-06)
        • AUX Adapter (C-139) And AUX Box Connector End View (C-138)
        • Passenger's Air Bag Module Connector End View (C-112)
        • Solenoid Valve (Tonneau Drive Cylinder) Connector End View (F-25)
        • Fuel Level Sensor Connector End View (D-10) (Eclipse)
        • Torque Converter Clutch Solenoid Valve Connector End View (B-111-4)
        • Intermediate Connector (C-21) Connector End View
        • Ignition Switch Connector End View (C-308)
        • Heated Seat Switch Connector End View
        • Heater Air Intake Duct Sensor Connector End View (C-105)
        • Rear Window Defogger Relay Connector End View
        • Radio Switch (LH) (C-311) And Clock Spring (C-303) Connector End View
        • PCM Connector End View
        • Remote Controlled Mirror (LH) Connector End View (E-12)
        • Joint Connector (C-01) Connector End View
        • Key Reminder Switch Connector End View (C-310)
        • Interphone Microphone Connector End View (D-51) (Eclipse)
        • Intermediate Connector (C-29) Connector End View
        • Front Dome Light Connector End View (D-03 And D-04)
        • Power Window Motor Connector End View (E-03)
        • Side-Airbag Module (LH) Connector End View (D-23)
        • Windshield Washer Motor Connector End View (A-33)
        • Clutch Pedal Position Switch Connector End View (C-129)
        • Front Impact Sensor (LH) Connector End View (A-21)
        • Injector Connector End View (B-01, B-03, B-26 And B-29)
        • Front Combination Light (LH) Connector End View (A-17)
        • Microphone Switch Connector End View
        • Knock Sensor Connector End View (B-126)
        • Power Window Motor (LH) Connector End View (E-16)
        • Side-Marker Light (LH) Connector End View (A-39)
        • Power Window Motor Connector End View (D-37)
        • Intermediate Connector (C-26) Connector End View
        • Headlight (LH) Connector End View (A-18)
        • Junction Block Connector (C-202 And C-209) Connector End View
        • Engine Oil Pressure Switch Connector End View (B-33)
        • Condenser Fan Motor Connector End View (A-29)
        • Horn Relay Connector End View (A-08X)
        • Ambient Air Temperature Sensor Connector End View (A-27)
        • Front Dome Light Connector End View (D-50)
        • Blower Switch Connector End View
        • Rear Height, Front Height And Slide Motor Connector End View
        • Rear Combination Light (LH) Connector End View (F-14) (Eclipse)
        • ASC OFF Switch Connector End View (C-133)
        • Radiator Fan Relay Connector End View
        • Door Speaker (LH) Connector End View (E-13)
        • Door Lock Actuator (LH) Connector End View (E-11)
        • Passenger Seat Belt Warning Light Connector End View (C-07)
        • A/T Control Relay Connector End View (B-15X)
        • Tweeter (LH) Connector End View (C-130)
        • Security Indicator Connector End View (C-02)
        • TCL/ASC-ECU Connector End View (A-02, A-03, A-38)
        • Front-ECU Connector End View (A-14X)
        • Luggage Compartment Light Connector End View (D-09)
        • A/C Pressure Sensor Connector End View (A-34)
        • Intermediate Connector (C-27) Connector End View
        • Steering Wheel Sensor Connector End View (C-312)
        • Junction Block Connector End View (C-202 And C-216)
        • Trunk Lid Latch Switch Connector End View (F-09)
        • Front Wheel Speed Sensor (LH) Connector End View (A-06)
        • Interphone Microphone Connector End View (D-51) (Eclipse Spyder)
        • Front Turn-Signal Light (LH) Connector End View (A-40)
        • Backup Light Switch Connector End View (B-114)
        • Quarter Window Regulator Motor Connector End View
        • Intermediate Connector (C-25) Connector End View
        • Potentiometer Connector End View (C-104)
        • TPMS Receiver Connector End View (C-121)
        • Tonneau Sensor Connector End View
        • Outside/Inside Air Selection Damper Control Motor Connector End View (C-108)
        • Side Impact Sensor (RH) Connector End View (D-33)
        • Clock Spring Side Air Bag Module Connector End View (C-305)
        • Inside Rear View Mirror Assembly Connector End View (D-49) (Eclipse)
        • Door Switch (LH) Connector End View (D-15) (Eclipse Spyder)
        • SRS-ECU Connector End View (C-122, C-123, C-124)
        • License Plate Light Connector End View (F-10) (Eclipse)
        • Front Fog Light Switch (C-127) Or Front Fog Light ASC Off Switch Connector End View (C-136)
        • Convertible Top Control Module Connector End View (F-27)
        • ETACS-ECU Connector End View (C-217, C-218, C-219)
        • Sunroof Switch Connector End View (D-32)
        • Rear Combination Light (RH) Connector End View (F-07) (Eclipse)
        • Fuel Tank Differential Pressure Sensor Connector End View (D-18)
        • Remote Controlled Mirror (RH) Connector End View (E-01)
        • Convertible Top Control Module Connector End View (F-26)
        • Starter Relay Connector End View (B-11X)
        • Underdrive Solenoid Valve Connector End View (B-111-1)
        • Joint Connector (C-03) Connector End View
        • Radiator Fan Motor Connector End View
        • Fuel Level Sensor (Main) Connector End View (D-19)
        • Woofer Connector End View (D-12) (Eclipse Spyder)
        • Door Switch (RH) Connector End View (D-01) (Eclipse)
        • Cylinder (1, 4) Heated Oxygen Sensor (Front) Connector End View (B-36)
        • Solenoid Valve Connector End View (F-18)
        • Rear Window Defogger Connector End View (F-04) (Eclipse)
        • Rear Window Defogger Connector End View (F-04) (Eclipse Spyder)
        • 5-Bow Sensor Connector End View (F-16)
        • Front-ECU Connector End View (A-13X)
        • Hazard Warning Light Switch Connector End View (C-08)
        • Brake Fluid Level Switch Connector End View (A-04)
        • Joint Connector (C-28) Connector End View
        • Air Thermo Sensor Connector End View (C-102)
        • Headlight Assembly (RH) Connector End View (A-42)
        • Intermediate Connector (C-11) Connector End View
        • (Cylinder 1, 4) Heated Oxygen Sensor (Rear) Connector End View (B-37)
        • Radio And CD Player Connector End View (C-117)
        • Evaporative Emission Ventilation Solenoid Connector End View (F-13)
        • Windshield Wiper Motor Connector End View (A-05)
        • Blower Switch Connector End View (C-116 And C-106)
        • Evaporative Emission Purge Solenoid Connector End View (B-05)
        • Column Switch Connector End View (C-309)
        • Convertible Top Control Module Connector End View (F-22, F-26 And F-27)
        • Fan Control Relay Connector End View (A-12X)
        • Quarter Speaker (RH) Connector End View (D-05) (Eclipse Spyder)
        • Headlight Assembly (LH) Connector End View (A-41)
        • Camshaft Position Sensor Connector End View (B-110)
        • Satellite Radio Tuner Connector End View (D-48) (Eclipse)
        • Engine Coolant Temperature Sensor Connector End View (B-106)
        • Front Fog Light Relay Connector End View (A-07X)
        • SRS-ECU Connector End View (C-123)
        • Ambient Air Temperature Sensor Connector End View (A-28)
        • Quarter Speaker (LH) Connector End View (D-14) (Eclipse Spyder)
        • Passenger's Seat Belt Pre-Tensioner Connector End View (D-34)
        • Parking And Side-Marker Light (RH) Connector End View (A-44)
        • License Plate Light Connector End View (F-10) (Eclipse Spyder)
        • Door Speaker (RH) Connector End View (E-07)
        • Amplifier (C-114 & C-115), CD Changer (C-117 & C-119) And CD Player Connector End View (C-118)
        • Rear Wheel Speed Sensor RH Connector End View (F-08) (Eclipse)
        • Fuel Level Sensor Connector End View (D-10) (Eclipse Spyder)
        • Windshield Wiper And Windshield Washer Switch Connector End View
        • Power Window Switch Connector End View
        • Shift Switch Assembly Connector End View (C-17)
        • Rear Wheel Speed Sensor RH Connector End View (F-08) (Eclipse Spyder)
        • Curtain Air Bag Module (RH) Connector End View (D-08)
        • Horn (Low) Connector End View (A-23)
        • (Cylinder 2, 3) Heated Oxygen Sensor (Rear) Connector End View (B-34)
        • Rear Wheel Speed Sensor LH Connector End View (F-12) (Eclipse Spyder)
        • Curtain Air Bag Module (Squib) (LH) Connector End View (D-11)
        • Crankshaft Position Sensor Connector End View (B-125)
        • Passenger Air Bag Off Indicator Light Connector End View (C-05)
        • (Cylinder 2, 3) Heated Oxygen Sensor (Front) Connector End View (B-35)
        • Windshield Washer Motor Connector End View
        • Convertible Top Switch Connector End View (C-30)
        • Liftgate Switch Connector End View
        • Clock Spring (C-303) And Remote Controlled Radio Switch (RH) Connector End View (C-301)
        • A/C-ECU Connector End View (C-20)
        • A/C Compressor Clutch Relay Connector End View (B-17X)
        • ETACS-ECU Connector End View (C-219)
        • G And Yaw Rate Sensor Connector End View (C-32)
        • Accelerator Pedal Position Sensor Connector End View (C-22)
        • Front Impact Sensor (RH) Connector End View (A-30)
        • Hood Switch Connector End View (A-37)
        • Short Stroke Switch (LH) Connector End View (E-18)
        • Fuel Pump Module Connector End View (D-19) (Eclipse)
        • Sunroof-ECU Connector End View (D-35)
        • Front-ECU Connector End View (A-13X, A-14X)
        • Door Switch Connector End View
        • Windshield And Rear Washer Motor Connector End View (A-32)
        • Side-Airbag Module (RH) Connector End View (D-28)
        • Hands Free Module Connector End View (C-35)
        • Multi-Center Display Unit Connector End View (C-06)
        • Rear Combination Light (LH) Connector End View (F-14) (Eclipse Spyder)
        • Reduction Solenoid Valve Connector End View (B-111-6)
        • TCL Switch Connector End View
        • Front Fog Light (RH) Connector End View (A-31)
        • Ignition Coil Connector End View (B-101, B-102, B-121 Or B-122)
        • Remote Controlled Radio Switch Connector End View
        • Combination Meter Connector End View (C-101)
        • Manifold Absolute Pressure Sensor Connector End View (B-02)
        • A/C-ECU Connector End View (C-14)
        • Rear Window Defogger Connector End View (F-01) (Eclipse)
        • Intermediate Connector (A-15) Connector End View
        • Front Seat Belt Retractor Connector End View (D-17)
        • A/C-ECU Connector End View (C-15, C-20)
        • CD Changer Connector End View (C-119)
        • Door Switch (LH) Connector End View (D-15) (Eclipse)
        • Clock Spring Connector End View (C-307 And C-305)
        • Short Stroke Switch (RH) Connector End View (E-17)
        • Convertible Top Control Module Connector End View (D-46)
        • Inside Rear View Mirror Assembly Connector End View (D-49) (Eclipse Spyder)
        • Headlight Leveling Switch Connector End View
        • Power Transistor Connector End View (C-107)
        • Potentiometer Connector End View (C-109)
        • Liftgate Lock Release Handle Connector End View (F-06)
        • TPMS Receiver Connector End View (C-211)
        • A/T Control Solenoid Valve Connector End View
        • Power Window Main Switch Connector End View (E-14)
        • Engine Oil Control Valve Connector End View (B-32)
        • Rear View Camera Connector End View (F-34) (Eclipse)
        • Intermediate Connector (C-09) Connector End View
        • ECM (M/T) Or PCM (A/T) Connector End View (B-22)
        • Parking Brake Switch Connector End View (C-16)
        • MFI Relay Connector End View (B-16X)
        • Tweeter (RH) (C-110) And Radio And CD Player Connector End View (C-117)
        • Power Window Relay Connector End View (C-207)
        • Rear Wiper Motor Connector End View (F-03)
        • Wheel Speed Sensor Connector End View
        • Fuel Pump Module Connector End View (D-19) (Eclipse Spyder)
        • Variable Intermittent Wiper Control Switch Connector End View
        • Transmission Range Switch Connector End View
        • Intermediate Connector (C-09) And Audio Amplifier Connector End View (C-114)
        • Junction Block Connector (C-208) Connector End View
        • Rear Window Defogger Relay Connector End View (C-205)
        • Remote Controlled Radio Switch Connector End View (RH)
        • Rear Combination Light (RH) Connector End View (F-07) (Eclipse Spyder)
        • Overdrive Solenoid Valve Connector End View (B-111-3)
        • Convertible Top Control Module (D-45) And Tonneau Sensor Connector End View (D-39)
        • Sunroof Motor Assembly Connector End View (D-35)
        • Intermediate Connector (C-24) Connector End View
        • Liftgate Lock Actuator Connector End View (F-11)
        • Front Fog Light (LH) Connector End View (A-24)
        • Intermediate Connector (C-10) Connector End View
        • Occupant Classification ECU Connector End View (D-26)
        • A/C-ECU Connector End View (C-15)
        • Fuel Pump Relay (1) Connector End View (C-214)
        • ETACS-ECU Connector End View (C-218)
        • Rear Wheel Speed Sensor LH Connector End View (F-12) (Eclipse)
        • PCM Connector End View (B-19)
        • Auto-Cruise Control Switch Connector End View (C-302)
        • ECM Connector End View (B-21)
        • Power Window Sub Switch Connector End View (E-08)
        • Rear View Camera Connector End View (F-34) (Eclipse Spyder)
        • Throttle Actuator Control Motor Relay Connector End View (B-13X)
        • Quarter Speaker (RH) Connector End View (D-05) (Eclipse)
        • Inside Rear View Mirror Assembly Connector End View (D-04)
        • Throttle Actuator Control Motor Connector End View (B-06)
        • Fuel Pump Relay (2) Connector End View (C-212)
        • Blower Switch Connector End View (C-12)
        • Stoplight Switch Connector End View (C-103)
        • EGR Valve Connector End View (B-105)
        • Seat Slide Sensor Connector End View (D-24)
        • Condenser Fan Relay Connector End View (A-19X)
        • Tweeter (LH) Connector End View (C-131)
        • 5-Bow Sensor (F-16 & F-22) And Convertible Top Control Module Connector End View (F-27)
        • Convertible Top Relay Connector End View (D-44)
        • Power Seat Switch Connector End View
        • Intake Air Temperature Sensor Connector End View
        • A/C-ECU Connector End View (C-19)
        • Combination Meter Connector End View (C-04)
        • Horn (High) Connector End View (A-25)
        • Input Shaft Speed Sensor Connector End View (B-112)
        • Satellite Radio Tuner Connector End View (D-48) (Eclipse Spyder)
        • ECM And PCM Connector End View
        • Power Steering Pressure Switch Connector End View (B-30)
        • 5-Bow Sensor Connector End View (F-22)
        • Mass Airflow Sensor Connector End View (B-09)
        • ECM Or PCM Connector End View (B-20)
        • Backup Light Switch Connector End View
        • Second Solenoid Valve Connector End View (B-111-2)
        • Blower Relay Connector End View
        • Convertible Top Motor Connector End View (D-41)
        • TPMS Receiver Connector End View (C-133)
        • Low-Reverse Solenoid Valve Connector End View (B-111-5)
        • Headlight (RH) Connector End View (A-35)
        • ECM Connector End View (B-18)
        • Clock Spring Connector End View (D-306)
        • Data Link Connector End View (C-125)
        • Junction Block Connector (C-203) Connector End View
        • Rear Window Defogger Connector End View (F-01) (Eclipse Spyder)
        • Intermediate Connector (C-23) Connector End View
        • Front Turn-Signal Light (RH) Connector End View (A-43)
        • SRS-ECU Connector End View
        • Junction Block Connector (C-215) Connector End View
        • Convertible Top Position Switch Connector End View (F-29)
        • ETACS-ECU Connector End View (C-217)
        • Output Shaft Speed Sensor Connector End View (B-108)
        • Quarter Speaker (LH) Connector End View (D-14) (Eclipse)
        • A/C-ECU Connector End View (C-14 Or C-15)
        • Control Solenoid Valve Assembly Connector End View (B-111)
        • Front Combination Light (RH) Connector End View (A-36)
        • Transmission Range Switch Connector End View (B-113)
        • Vehicle Speed Sensor Connector End View (B-104)
        • Hands Free Module Connector End View (C-34)
        • SRS-ECU Connector End View (C-124)
        • Liftgate Lock Release Handle Connector End View
        • Front Wheel Speed Sensor RH Connector End View (A-01)
        • Lighting Switch And Windshield Wiper Switch Connector End View
        • Seat Belt Switch (Driver's Side) Connector End View (D-22)
        • Tonneau Latch Switch Connector End View (F-28)
        • Woofer Connector End View (D-12) (Eclipse)
        • Fan Control Module Connector End View (A-22)
        • Door Mirror Control Switch Connector End View
        • Passenger's Seat Belt Switch Connector End View (D-25)
        • Generator Connector End View (B-120)
        • Driver Seat Belt Pre-Tensioner Connector End View (D-16)
        • 5-Bow Sensor (UP) Connector End View (F-23)
        • Tweeter (RH) (C-111) And CD Changer Connector End View (C-117)
    • General - Electrical
      • Harness Connector Inspection
        • Connector Continuity And Voltage Test
        • Improper Terminal Engagement Check
        • Connector Terminal Engagement And Disengagement
        • Computer Connector
        • Round Waterproof Connector
        • Rectangular Waterproof Connector
        • Injector Connector
      • How To Diagnose
        • How To Diagnose
        • Troubleshooting Steps
        • Information For Diagnosis
        • Inspection
        • Inspection Instruments
        • Checking Fuses
          • Notes
          • Cautions In Event Of Blown Fuse
        • Checking Switches
        • Checking Relays
        • Cables And Wires Check
        • Battery Handling
        • General Electrical System Check
    • OEM Circuit Diagrams
      • How To Read Circuit Diagrams
        • Notes
        • Connector/Grounding Indications
        • Symbols (Except Connector And Grounding)
        • Wire Color Codes
      • Junction Block
      • Joint Connector
      • Centralized Junction
        • Fusible Link And Fuse
        • Centralized Relay
      • Power Distribution System <Eclipse (Vehicles With Halogen Type Headlight)>
      • Power Distribution System <Eclipse (Vehicles With Discharge Type Headlight)>
      • Power Distribution System <Eclipse SPYDER (Vehicles With Halogen Type Headlight)>
      • Power Distribution System <Eclipse SPYDER (Vehicles With Discharge Type Headlight)>
      • Starting System <M/T>
      • Starting System <A/T>
      • Ignition System <2.4L Engine>
      • Ignition System <3.8L Engine>
      • Charging System
      • MULTIPORT Fuel Injection (MFI) System <2.4L Engine-M/T>
      • MULTIPORT Fuel Injection (MFI) System <2.4L Engine-A/T>
      • MULTIPORT Fuel Injection (MFI) System <3.8L Engine-M/T>
      • MULTIPORT Fuel Injection (MFI) System <3.8L Engine-A/T>
      • Cooling System <2.4L Engine>
      • Cooling System <3.8L Engine>
      • INVECS-II 4A/T <2.4L Engine (Vehicles With Halogen Type Headlight)>
      • INVECS-II 4A/T <2.4L Engine (Vehicles With Discharge Type Headlight)>
      • INVECS-II 5A/T <3.8L Engine>
      • Headlight <Halogen Type>
      • Headlight <Discharge Type>
      • Headlight Leveling System
      • Taillight, Position Light And License Plate Light <Vehicles With Halogen Type Headlight>
      • Taillight, Position Light And License Plate Light <Vehicles With Discharge Type Headlight>
      • Fog Light <Vehicles With Halogen Type Headlight>
      • Fog Light <Vehicles With Discharge Type Headlight>
      • Front Dome Light, Rear Dome Light, Luggage Compartment Light And Ignition Key Hole Illumination Light <Eclipse>
      • Front Dome Light And Ignition Key Hole Illumination Light <Eclipse SPYDER>
      • Glove Box Light
      • Vanity Mirror Light
      • Turn-Signal Light And Hazard Warning Light <Vehicles With Halogen Type Headlight>
      • Turn-Signal Light And Hazard Warning Light <Vehicles With Discharge Type Headlight>
      • Backup Light <M/T>
      • Backup Light <A/T>
      • Stoplight
      • Horn
      • Meter And Gauge <M/T (Vehicles With Halogen Type Headlight)>
      • Meter And Gauge <M/T (Vehicles With Discharge Type Headlight)>
      • Meter And Gauge <A/T (Vehicles With Halogen Type Headlight)>
      • Meter And Gauge <A/T (Vehicles With Discharge Type Headlight)>
      • Brake Warning Light, Oil Pressure Warning Light, Fuel Warning Light
      • Power Windows <Eclipse>
      • Power Windows <Eclipse SPYDER>
      • Central Door Locking System <Eclipse>
      • Central Door Locking System <Eclipse SPYDER>
      • Manual Air Conditioning System <2.4L Engine (Vehicles With Halogen Type Headlight)>
      • Manual Air Conditioning System <2.4L Engine (Vehicles With Discharge Type Headlight)>
      • Automatic Air Conditioning System <3.8L Engine>
      • Windshield Wiper And Washer <Eclipse-M/T>
      • Windshield Wiper And Washer <Eclipse-A/T>
      • Windshield Wiper And Washer <Eclipse SPYDER-M/T>
      • Windshield Wiper And Washer <Eclipse SPYDER-A/T>
      • Rear Wiper And Washer <M/T>
      • Rear Wiper And Washer <A/T>
      • Rear Window Defogger And Door Mirror Heater <Eclipse (Vehicles With Halogen Type Headlight)>
      • Rear Window Defogger And Door Mirror Heater <Eclipse (Vehicles With Discharge Type Headlight)>
      • Rear Window Defogger And Door Mirror Heater <Eclipse SPYDER (Vehicles With Halogen Type Headlight)>
      • Rear Window Defogger And Door Mirror Heater <Eclipse SPYDER (Vehicles With Discharge Type Headlight)>
      • Remote Controlled Mirror
      • Automatic Anti-Dazzling Mirror
      • Audio System <Vehicles Without Audio Amplifier>
      • Audio System <Vehicles With Audio Amplifier (Eclipse)>
      • Audio System <Vehicles With Audio Amplifier (Eclipse SPYDER)>
      • Accessory Socket
      • Multi-Center Display
      • Sunroof
      • Auto-Cruise Control System <2.4L Engine-M/T>
      • Auto-Cruise Control System <2.4L Engine-A/T>
      • Auto-Cruise Control System <3.8L Engine-M/T>
      • Auto-Cruise Control System <3.8L Engine-A/T>
      • Electronic Brake-Force Distribution (EBD), Anti-Lock Braking System (Abs) And Active Stability Control System (ASC) <Vehicles With Halogen Type Headlight>
      • Electronic Brake-Force Distribution (EBD), Anti-Lock Braking System (Abs) And Active Stability Control System (ASC) <Vehicles With Discharge Type Headlight>
      • Engine Immobilizer System <2.4L Engine-M/T>
      • Engine Immobilizer System <2.4L Engine-A/T>
      • Engine Immobilizer System <3.8L Engine-M/T>
      • Engine Immobilizer System <3.8L Engine-A/T>
      • Supplemental Restraint System (SRS) <Vehicles With Halogen Type Headlight>
      • Supplemental Restraint System (SRS) <Vehicles With Discharge Type Headlight>
      • Power Seat
      • Heated Seat <Vehicles With Halogen Type Headlight>
      • Heated Seat <Vehicles With Discharge Type Headlight>
      • Theft-Alarm System
      • Tire Pressure Monitoring System (TPMS)
      • Hands-Free Cellular Phone System
      • Rear View Camera
      • Forgotten Key Prevention Function
      • Lighting Monitor Tone Alarm
      • Ignition Key Reminder Tone Alarm
      • Seat Belt Warning Tone Alarm
      • Door Ajar Warning Tone Alarm <M/T>
      • Door Ajar Warning Tone Alarm <A/T>
      • Spare Connector (For Remote Controlled Engine Starter) <A/T>
      • Controller Area Network (Can) <2.4L Engine-M/T>
      • Controller Area Network (Can) <2.4L Engine-A/T>
      • Controller Area Network (Can) <3.8L Engine-M/T>
      • Controller Area Network (Can) <3.8L Engine-A/T>
      • Convertible Top
    • OEM Splice Locations
      • How To Read Splice Locations
      • Index
      • Engine Compartment
      • Engine And Transaxle <2.4L Engine>
      • Engine And Transaxle <3.8L Engine>
      • Dash Panel
      • Floor And Roof <Eclipse>
      • Floor And Roof <Eclipse SPYDER>
      • Door
      • Luggage Compartment <Eclipse>
      • Luggage Compartment <Eclipse SPYDER>
    • OEM Wiring Harness Routing
      • Overall Configuration Diagram <Eclipse>
      • Overall Configuration Diagram <Eclipse SPYDER>
      • How To Read Configuration Diagrams
      • Engine Compartment
      • Engine And Transaxle <2.4L Engine>
      • Engine And Transaxle <3.8L Engine>
      • Dash Panel
      • Floor And Roof <Eclipse>
      • Floor And Roof <Eclipse SPYDER>
      • Door
      • Luggage Compartment <Eclipse>
      • Luggage Compartment <Eclipse SPYDER>
    • Simplified Wiring System (SWS)
      • General Information
        • Communication Method
        • Operation
          • Tone Alarm Function
            • Ignition Key Reminder Tone Alarm Function
            • Light Reminder Tone Alarm Function
            • Seat Belt Tone Alarm Function
            • Door Ajar Tone Alarm Function
          • Central Door Locking System
            • Central Door Locking System Operation
            • Forgotten Key Prevention Function
          • Power Window Relay Control
            • Power Window Relay Operation
            • Power Window Timer Function
          • Keyless Entry System
            • Keyless Entry Hazard Answer Back Function
            • Keyless Entry Horn Answer Back Function
            • Liftgate Unlock Function <Eclipse>
            • Trunk Lid Unlock Function <Eclipse SPYDER>
            • Timed Locking Mechanism
          • Sunroof Control
            • Sunroof Timer Function
          • Windshield Wiper And Washer
            • Low-Speed Wiper, High-Speed Wiper Control
            • Intermittent Control
            • Mist Wiper Control
            • Washer Control
          • Rear Wiper And Washer
            • Intermittent Control (Basic Control)
            • "R" Position-Linked Control
            • Rear Washer Control
          • Headlight
            • Headlight Automatic Shutdown Function
            • High-Beam Indicator
            • Daytime Running Light Function
          • Flasher Timer
            • Turn-Signal Light
            • Hazard Warning Light
            • Turn-Signal Indicators
          • Front Fog Light
            • Front Fog Light
            • Front Fog Light Indicator
            • Interior Light
            • Interior Light Automatic Shutdown Function
            • Seat Belt Indicator
            • Door-Ajar Indicator Light
            • Ignition Key Cylinder Illumination Function
      • Special Tools
      • SWS Diagnosis
        • General Information
          • Before Carrying Out Troubleshooting
        • Diagnostic Function
          • On-Board Diagnostics
          • How To Connect The Scan Tool (M.U.T.-III)
          • How To Read And Erase Diagnostic Trouble Codes
          • How To Diagnose The Can Bus Lines
        • SWS Diagnostic Troubleshooting Strategy
        • How To Connect SWS Monitor
        • How To Use SWS Monitor
        • How To Check Ecus
        • Service Data Check
          • Notes
          • • Notes
            • Column-Ecu
              • Notes
              • ETACS
              • Front-ECU, Power window, Sunroof
            • • Notes
              • Wiper
              • Rear Wiper
              • Lighting
              • Turn Signal
              • Buzzer
              • Sunroof
              • Pulse Check
      • Diagnostic Trouble Code Chart
      • Diagnostic Trouble Code Procedures
        • DTC U1700: Malfunction in the SWS communication line
          • Notes
          • Trouble Judgment
            • Notes
            • Technical Description (Comment)
              • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1701: Communication error in the column switch
          • Notes
          • Trouble Judgment
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1702: Communication error in the front-ECU
          • Notes
          • Trouble Judgment
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
            • Troubleshooting Hints
          • Diagnosis
        • DTC U1703: Communication error in the sunroof-ECU or the sunroof not installed
          • Notes
          • Trouble Judgment
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1073: Bus off
          • Notes
          • Trouble Judgment
          • Technical Description (Comment)
            • Notes
            • Troubleshooting Hints
            • Diagnosis
        • DTC U1100: ECM or PCM time-out (related to engine); DTC U1101: ECM or PCM time-out (related to transaxle)
          • Notes
          • Trouble Judgment
            • DTC U1100
            • DTC U1101
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1108: Combination meter time-out
          • Notes
          • Trouble Judgment
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1110: A/C-ECU time-out
          • Notes
          • Trouble Judgment
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
        • DTC U1128: Failure information on combination meter
          • Notes
          • Trouble Judgment
          • Technical Description (Comment)
            • Current trouble
            • Past trouble
          • Troubleshooting Hints
          • Diagnosis
      • Symptom Chart
        • Ecu Communication System
        • Function System
      • Input Signal Chart
        • SWS Monitor
        • Scan Tool Or Voltmeter
      • Symptom Procedures
        • INSPECTION PROCEDURE A-1: Communication with the SWS monitor kit is not possible
          • Notes
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE A-2: Communication with the column switch (column-ECU) is not possible
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
          • INSPECTION PROCEDURE A-3: Communication with the ETACS-ECU is not possible
        • INSPECTION PROCEDURE A-4: Communication with the front-ECU is not possible
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE A-5: Communication with the sunroof-ECU is not possible
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • Tone Alarm
          • General Description Concerning The Tone Alarm
            • Notes
            • Tone Alarm
              • Ignition Key Reminder Tone Alarm Function
              • Light Reminder Tone Alarm Function
              • Seat belt tone alarm function
              • Door Ajar Tone Alarm Function
          • INSPECTION PROCEDURE B-1: Tone Alarm: Ignition key reminder tone alarm function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE B-2: Tone Alarm: Light reminder tone alarm function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE B-3: Tone Alarm: Seat belt tone alarm function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE B-4: Tone Alarm: Door ajar tone alarm function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Central Door Locking System
          • General Description Concerning Central Door Locking System
            • Notes
            • Central Door Locking System
              • Door Locking Or Unlocking By Operating The Driver's Or Passenger's Door Lock Switch
              • Forgotten key prevention function
          • INSPECTION PROCEDURE C-1: Central Door Locking System: The central door locking system does not work at all
            • Notes
            • Circuit Operation
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE C-2: Central Door Locking System: Some doors do not lock or unlock
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE C-3: Central Door Locking System: None of the doors lock and unlock with just the door lock switch operation
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE C-4: Central Door Locking System: None of the doors lock and unlock with just the driver's or passenger's inside lock knob operation
            • Notes
            • Technical Description
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE C-5: Central Door Locking System: Forgotten key prevention function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Power Windows
          • General Description Concerning The Power Windows
            • Notes
            • Power Window
              • Power Window Timer Function
          • INSPECTION PROCEDURE D-1: Power Windows: Power windows do not work at all
            • Notes
            • Circuit Operation
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE D-2: Power Window: The power window timer function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE D-3: Power Window: Only the door window (LH) does not work by operating the power window main switch
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE D-4: Power Window: Power window (RH) does not work normally by operating the power window sub switch
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE D-5: Power Window: Power window (RH) does not work normally by operating the power window main switch
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Keyless Entry System
          • General Description Concerning The Keyless Entry System
            • Notes
            • Keyless Entry System
              • Keyless Entry Hazard Answer Back Function
              • Keyless Entry Horn Answer Back Function
              • Liftgate Unlock Function
              • Timed Locking Mechanism
          • INSPECTION PROCEDURE E-1: Keyless Entry System: Keyless entry system does not operate
            • Notes
            • Circuit Operation
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE E-2: Keyless Entry System: The dome light, the turn-signal lights and the horn do not operate through the answer back function
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE E-3: Keyless Entry System: Encrypted code cannot be registered
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE E-4: Keyless Entry System: The liftgate or trunk lid is not opened when the keyless entry transmitter "LIFTGATE" button or "TRUNK LID" button is operated
            • Notes
            • Circuit Operation
            • Troubleshooting Hints
            • Diagnosis
        • Sunroof
          • General Description Concerning The Sunroof
            • Notes
            • Sunroof
              • Sunroof Timer Function
          • INSPECTION PROCEDURE F-1: Sunroof: Sunroof does not operate
            • Notes
            • Circuit Operation
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE F-2: Sunroof: Any of the sunroof switch positions is defective
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE F-3: Sunroof: Sunroof timer function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Windshield Wiper And Washer
          • General Description Concerning The Windshield Wiper And Washer
            • Notes
            • Windshield Wiper And Washer
              • Intermittent Control (Vehicle Speed-Dependent Variable Type)
              • Mist wiper control
              • Low-speed wiper, high-speed wiper control
              • Washer control
          • INSPECTION PROCEDURE G-1: Windshield Wiper and Washer: The windshield wipers do not work at all
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE G-2: Windshield Wiper and Washer: The windshield wipers do not work when the windshield wiper switch is at "INT" or "MIST" position or the windshield washer switch is at "ON" position. However, the wipers work at low speed when the windshield wiper switch is at "LO" or "HI."
          • Technical Description (Comment)
            • Notes
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE G-3: Windshield Wiper and Washer: Either of the windshield wiper switch positions are defective
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE G-4: Windshield Wiper and Washer: Windshield wipers does not stop at the predetermined park position
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE G-5: Windshield Wiper and Washer: The windshield intermittent wiper interval cannot be adjusted by using the variable intermittent wiper control switch
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE G-6: Windshield Wiper and Washer: The windshield intermittent wiper interval is not changed according to the vehicle speed
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE G-7: Windshield Wiper and Washer: The windshield washer does not work
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Rear Wiper And Washer
          • General Description Concerning The Rear Wiper And Washer
            • Notes
            • Rear Wiper And Washer
              • Rear wiper control
              • Rear washer control
          • INSPECTION PROCEDURE H-1: Rear Wiper and Washer: Rear wiper does not work at all
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE H-2: Rear Wiper and Washer: Rear wiper does not stop at the predetermined park position
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE H-3: Rear Wiper and Washer: When the selector lever is moved to "R" position during the rear wiper operation, the rear wiper does not operate at the continuous mode
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE H-4: Rear Wiper and Washer: Rear washer does not operate
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Headlight And Taillight
          • General Description Concerning The Headlights And Taillights
            • Notes
            • Headlights And Taillights
              • Taillights
              • Headlights
              • Headlight Automatic-Shutoff Function
              • High-Beam Indicator
              • Daytime running light function
          • INSPECTION PROCEDURE I-1: Headlight and Taillight: None of the taillight illuminate normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-2: Headlight and Taillight: None of the headlight (low-beam) illuminate normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-3: Headlight and Taillight: The headlights (high-beam) do not Illuminate normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-4: Headlight and Taillight: When the passing switch is turned "ON," the headlights (low-beam or high-beam) do not illuminate
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-5: Headlight and Taillight: Headlights do not illuminate when the lighting switch is at "TAIL," and "PASSING" position, but illuminate at low-beam when the switch is at "HEAD" position. At this position, the headlights cannot be changed to high beam by operating the dimmer switch
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-6: Headlight and Taillight: The taillights, the front parking lights or the license plate light do not illuminate.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-6: Headlight and Taillight: The taillights, the front parking lights or the license plate light do not illuminate.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-7: Headlight and Taillight: One of the headlights does not illuminate.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-7: Headlight and Taillight: One of the headlights does not illuminate.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-8: Headlight and Taillight: The high-beam indicator light does not illuminate
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-9: Headlight and Taillight: Headlight automatic shutoff function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE I-10: Headlight and Taillight: Headlight dimmer switch automatic resetting function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hint
            • Diagnosis
          • INSPECTION PROCEDURE I-11: Headlight and Taillight: Daytime running light function does not work normally
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Flasher Timer
          • General Description Concerning The Flasher Timer
            • Notes
            • Flasher Timer
              • Turn-Signal Light
              • Hazard Warning Light
              • Turn-Signal Indicators
          • INSPECTION PROCEDURE J-1: Flasher Timer: Turn-signal lights do not flash when the turn-signal light switch is turned on
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE J-2: Flasher Timer: Hazard warning lights do not flash when the hazard warning light switch is turned on
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE J-3: Flasher Timer: One of the turn-signal lights does not illuminate.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE J-3: Flasher Timer: One of the turn-signal lights does not illuminate.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE J-4: Flasher Timer: The turn-signal light indicator does not illuminate normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Fog Light
          • General Description Concerning The Front Fog Lights
            • Notes
            • Front Fog Light
              • Front fog light
            • Front Fog Light Indicator
          • INSPECTION PROCEDURE K-1: Front fog light: Front fog lights do not illuminate when the front fog light switch is turned on
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE K-2: Front fog Light: Front fog lights do not go out when the headlights (low-beam) are turned off while the front fog lights are on
            • Technical Description (Comment)
            • Troubleshooting Hint
            • Diagnosis
          • INSPECTION PROCEDURE K-3: Front fog Light: One of the front fog lights does not illuminate
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE K-4: Front fog light: The front fog light indicator does not illuminate normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Interior Light
          • General Description Concerning The Interior Light
            • Notes
            • Interior Light
              • Interior Light Control
              • Interior light automatic-shutoff function
              • Seat belt indicator
              • Door Ajar Indicator
              • Ignition Key Cylinder Illumination Function
          • INSPECTION PROCEDURE L-1: Interior Light: The dome lights do not illuminate and go out normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE L-2: Interior Light: The front dome light or rear dome light does not illuminate or go out normally.
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE L-2: Interior Light: The dome light does not illuminate or go out normally.
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE L-3: Interior Light: The luggage compartment light does not illuminate or go out normally.
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE L-4: Interior light: Dome light dimming function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE L-5: Interior Light: The ignition key hole illumination light does not illuminate or go out normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE L-6: Interior Light: The interior light automatic shutoff function does not work normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE L-7: Interior Light: The door ajar indicator lights do not illuminate or go out normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE L-8: Interior Light: The seat belt warning light does not illuminate or go out normally
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Theft-Alarm System
          • General Description Concerning The Theft-Alarm System
            • Notes
            • Theft-Alarm System
              • Armed Stage
              • Disarmed Stage
              • Alarm Stage
              • Type Of Alarm
              • Alarm Deactivation
              • Testing The Theft-Alarm System
          • INSPECTION PROCEDURE O-1: Theft-alarm System: Theft-alarm system is not armed (theft-alarm indicator does not illuminate)
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE O-2: Theft-alarm System: The theft-alarm system is not armed
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE O-3: Theft-alarm System: Horn does not sound when the theft-alarm system is triggered
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE O-4: Theft-alarm System: Headlights (high-beam) do not flash when the theft-alarm system is triggered
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE O-5: Theft-alarm System: Panic alarm function does not work
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
      • Input Signal Procedures
        • INSPECTION PROCEDURE M-1: ETACS-ECU does not receive any signal from the ignition switch (ACC)
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE M-2: ETACS-ECU does not receive any signal from the ignition switch (IG1)
          • Notes
          • Circuit Operation
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE M-3: ETACS-ECU does not receive any signal from the front fog light switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
            • Notes
            • Diagnosis
        • INSPECTION PROCEDURE M-4: ETACS-ECU does not receive "R" position signal from the backup light switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE M-5: ETACS-ECU does not receive one of signals from the door switches
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE M-6: Column Switch: ETACS-ECU does not receive any signal from the taillight switch, the headlight switch, the passing light switch, the dimmer switch or the turn-signal light switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE M-7: Column switch: ETACS-ECU does not receive any signal from the windshield mist wiper switch, the windshield intermittent wiper switch, the windshield low-speed wiper switch, the windshield high-speed wiper switch, the rear wiper switch, the windshield washer switch or the rear washer switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE M-8: Column Switch: ETACS-ECU does not receive any signal from the variable intermittent wiper control switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE M-9: Sunroof Switch: ETACS-ECU does not receive any signal from the up, open or close/down switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
          • INSPECTION PROCEDURE N-1: ETACS-ECU does not receive any signal from the key reminder switch
        • INSPECTION PROCEDURE N-2: ETACS-ECU does not receive any signal from the hazard warning light switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE N-3: ETACS-ECU does not receive one of signals from the door lock actuators
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE N-4: ETACS-ECU does not receive one of signals from the door lock switch (incorporated in the power window main switch and power window sub switch)
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE N-5: ETACS-ECU does not receive any signal from the liftgate latch switch.
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE N-5: ETACS-ECU does not receive any signal from the trunk lid latch switch.
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE N-6: ETACS-ECU does not receive any signal from the liftgate lock release handle.
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE N-7: Transmitter: ETACS-ECU does not receive any signal from the lock, unlock, liftgate , trunk lid or panic switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
        • INSPECTION PROCEDURE N-8: ETACS-ECU does not receive any interior light loaded signal
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
          • INSPECTION PROCEDURE N-9: ETACS-ECU does not receive an auto-stop signal from the rear wiper motor
        • INSPECTION PROCEDURE N-10: ETACS-ECU does not receive any signal from hood switch
          • Notes
          • Circuit Operation
          • Technical Description (Comment)
          • Troubleshooting Hints
          • Diagnosis
      • Check At Ecu Terminal
        • ETACS-Ecu
        • Column Switch
        • Front-Ecu
        • Sunroof-Ecu
  • Starter
    • Specifications [Engine Electrical]
      • Fastener Tightening Specifications
        • <2.4L Engine>
        • <3.8L Engine>
      • General Specifications
        • <2.4L Engine>
        • <3.8L Engine>
      • Service Specifications
    • Starting System
      • General Description
        • Notes
        • Operation
      • Starting System Diagnosis
        • Troubleshooting Hints
        • Troubleshooting Guide
      • On-Vehicle Service
        • Starter Relay Check <M/T>
      • Starter Motor Assembly
        • Removal And Installation <2.4L Engine>
          • <M/T>
          • <A/T>
          • Removal Service Points
            • <<A>> Clutch Release Cylinder Removal
            • <<B>> ATF Warmer (Transmission Fluid Cooler) And Bracket Assembly Removal
            • <<C>> Starter Assembly <M/T> Removal
            • <<D>> Starter Assembly <A/T> Removal
        • Removal And Installation <3.8L Engine>
          • Notes
          • Removal Service Point
            • <<A>> Starter Assembly Removal
        • Inspection
          • Pinion Gap Adjustment
          • Magnetic Switch Pull-In Test
          • Magnetic Switch Hold-In Test
          • Free Running Test
          • Magnetic Switch Return Test
          • Commutator Check
          • Brush Check
          • Overrunning Clutch Check
          • Front And Rear Bracket Bushing Check
          • Armature Check
        • Disassembly And Assembly
          • Notes
          • Disassembly Service Points
            • <<A>> Snap Ring And Stop Ring Removal
          • Starter Motor Part Cleaning
          • Assembly Service Point
            • >>A<< Stop Ring And Snap Ring Installation
  • Wiring Diagrams
    • Connector End Views - 2.4L
      • Connector End Views
        • Interlock Switch Connector End View (C-101)
        • Convertible Top Control Module Connector End View (D-45)
        • SRS-ECU Connector End View (C-122)
        • Clockspring Connector End View (C-302, C-303, C-306)
        • Intermediate Connector (D-30) And Rear Dome Light Connector End View (D-06)
        • Blower Motor Connector End View (C-116)
        • Door Switch (RH) Connector End View (D-01) (Eclipse Spyder)
        • Door Lock Actuator (RH) Connector End View (E-05)
        • Power Window Sub Switch Connector End View (E-06)
        • AUX Adapter (C-139) And AUX Box Connector End View (C-138)
        • Passenger's Air Bag Module Connector End View (C-112)
        • Solenoid Valve (Tonneau Drive Cylinder) Connector End View (F-25)
        • Fuel Level Sensor Connector End View (D-10) (Eclipse)
        • Torque Converter Clutch Solenoid Valve Connector End View (B-111-4)
        • Intermediate Connector (C-21) Connector End View
        • Ignition Switch Connector End View (C-308)
        • Heated Seat Switch Connector End View
        • Heater Air Intake Duct Sensor Connector End View (C-105)
        • Rear Window Defogger Relay Connector End View
        • Radio Switch (LH) (C-311) And Clock Spring (C-303) Connector End View
        • PCM Connector End View
        • Remote Controlled Mirror (LH) Connector End View (E-12)
        • Joint Connector (C-01) Connector End View
        • Key Reminder Switch Connector End View (C-310)
        • Interphone Microphone Connector End View (D-51) (Eclipse)
        • Intermediate Connector (C-29) Connector End View
        • Front Dome Light Connector End View (D-03 And D-04)
        • Power Window Motor Connector End View (E-03)
        • Side-Airbag Module (LH) Connector End View (D-23)
        • Windshield Washer Motor Connector End View (A-33)
        • Clutch Pedal Position Switch Connector End View (C-129)
        • Front Impact Sensor (LH) Connector End View (A-21)
        • Injector Connector End View (B-01, B-03, B-26 And B-29)
        • Front Combination Light (LH) Connector End View (A-17)
        • Microphone Switch Connector End View
        • Knock Sensor Connector End View (B-126)
        • Power Window Motor (LH) Connector End View (E-16)
        • Side-Marker Light (LH) Connector End View (A-39)
        • Power Window Motor Connector End View (D-37)
        • Intermediate Connector (C-26) Connector End View
        • Headlight (LH) Connector End View (A-18)
        • Junction Block Connector (C-202 And C-209) Connector End View
        • Engine Oil Pressure Switch Connector End View (B-33)
        • Condenser Fan Motor Connector End View (A-29)
        • Horn Relay Connector End View (A-08X)
        • Ambient Air Temperature Sensor Connector End View (A-27)
        • Front Dome Light Connector End View (D-50)
        • Blower Switch Connector End View
        • Rear Height, Front Height And Slide Motor Connector End View
        • Rear Combination Light (LH) Connector End View (F-14) (Eclipse)
        • ASC OFF Switch Connector End View (C-133)
        • Radiator Fan Relay Connector End View
        • Door Speaker (LH) Connector End View (E-13)
        • Door Lock Actuator (LH) Connector End View (E-11)
        • Passenger Seat Belt Warning Light Connector End View (C-07)
        • A/T Control Relay Connector End View (B-15X)
        • Tweeter (LH) Connector End View (C-130)
        • Security Indicator Connector End View (C-02)
        • TCL/ASC-ECU Connector End View (A-02, A-03, A-38)
        • Front-ECU Connector End View (A-14X)
        • Luggage Compartment Light Connector End View (D-09)
        • A/C Pressure Sensor Connector End View (A-34)
        • Intermediate Connector (C-27) Connector End View
        • Steering Wheel Sensor Connector End View (C-312)
        • Junction Block Connector End View (C-202 And C-216)
        • Trunk Lid Latch Switch Connector End View (F-09)
        • Front Wheel Speed Sensor (LH) Connector End View (A-06)
        • Interphone Microphone Connector End View (D-51) (Eclipse Spyder)
        • Front Turn-Signal Light (LH) Connector End View (A-40)
        • Backup Light Switch Connector End View (B-114)
        • Quarter Window Regulator Motor Connector End View
        • Intermediate Connector (C-25) Connector End View
        • Potentiometer Connector End View (C-104)
        • TPMS Receiver Connector End View (C-121)
        • Tonneau Sensor Connector End View
        • Outside/Inside Air Selection Damper Control Motor Connector End View (C-108)
        • Side Impact Sensor (RH) Connector End View (D-33)
        • Clock Spring Side Air Bag Module Connector End View (C-305)
        • Inside Rear View Mirror Assembly Connector End View (D-49) (Eclipse)
        • Door Switch (LH) Connector End View (D-15) (Eclipse Spyder)
        • SRS-ECU Connector End View (C-122, C-123, C-124)
        • License Plate Light Connector End View (F-10) (Eclipse)
        • Front Fog Light Switch (C-127) Or Front Fog Light ASC Off Switch Connector End View (C-136)
        • Convertible Top Control Module Connector End View (F-27)
        • ETACS-ECU Connector End View (C-217, C-218, C-219)
        • Sunroof Switch Connector End View (D-32)
        • Rear Combination Light (RH) Connector End View (F-07) (Eclipse)
        • Fuel Tank Differential Pressure Sensor Connector End View (D-18)
        • Remote Controlled Mirror (RH) Connector End View (E-01)
        • Convertible Top Control Module Connector End View (F-26)
        • Starter Relay Connector End View (B-11X)
        • Underdrive Solenoid Valve Connector End View (B-111-1)
        • Joint Connector (C-03) Connector End View
        • Radiator Fan Motor Connector End View
        • Fuel Level Sensor (Main) Connector End View (D-19)
        • Woofer Connector End View (D-12) (Eclipse Spyder)
        • Door Switch (RH) Connector End View (D-01) (Eclipse)
        • Cylinder (1, 4) Heated Oxygen Sensor (Front) Connector End View (B-36)
        • Solenoid Valve Connector End View (F-18)
        • Rear Window Defogger Connector End View (F-04) (Eclipse)
        • Rear Window Defogger Connector End View (F-04) (Eclipse Spyder)
        • 5-Bow Sensor Connector End View (F-16)
        • Front-ECU Connector End View (A-13X)
        • Hazard Warning Light Switch Connector End View (C-08)
        • Brake Fluid Level Switch Connector End View (A-04)
        • Joint Connector (C-28) Connector End View
        • Air Thermo Sensor Connector End View (C-102)
        • Headlight Assembly (RH) Connector End View (A-42)
        • Intermediate Connector (C-11) Connector End View
        • (Cylinder 1, 4) Heated Oxygen Sensor (Rear) Connector End View (B-37)
        • Radio And CD Player Connector End View (C-117)
        • Evaporative Emission Ventilation Solenoid Connector End View (F-13)
        • Windshield Wiper Motor Connector End View (A-05)
        • Blower Switch Connector End View (C-116 And C-106)
        • Evaporative Emission Purge Solenoid Connector End View (B-05)
        • Column Switch Connector End View (C-309)
        • Convertible Top Control Module Connector End View (F-22, F-26 And F-27)
        • Fan Control Relay Connector End View (A-12X)
        • Quarter Speaker (RH) Connector End View (D-05) (Eclipse Spyder)
        • Headlight Assembly (LH) Connector End View (A-41)
        • Camshaft Position Sensor Connector End View (B-110)
        • Satellite Radio Tuner Connector End View (D-48) (Eclipse)
        • Engine Coolant Temperature Sensor Connector End View (B-106)
        • Front Fog Light Relay Connector End View (A-07X)
        • SRS-ECU Connector End View (C-123)
        • Ambient Air Temperature Sensor Connector End View (A-28)
        • Quarter Speaker (LH) Connector End View (D-14) (Eclipse Spyder)
        • Passenger's Seat Belt Pre-Tensioner Connector End View (D-34)
        • Parking And Side-Marker Light (RH) Connector End View (A-44)
        • License Plate Light Connector End View (F-10) (Eclipse Spyder)
        • Door Speaker (RH) Connector End View (E-07)
        • Amplifier (C-114 & C-115), CD Changer (C-117 & C-119) And CD Player Connector End View (C-118)
        • Rear Wheel Speed Sensor RH Connector End View (F-08) (Eclipse)
        • Fuel Level Sensor Connector End View (D-10) (Eclipse Spyder)
        • Windshield Wiper And Windshield Washer Switch Connector End View
        • Power Window Switch Connector End View
        • Shift Switch Assembly Connector End View (C-17)
        • Rear Wheel Speed Sensor RH Connector End View (F-08) (Eclipse Spyder)
        • Curtain Air Bag Module (RH) Connector End View (D-08)
        • Horn (Low) Connector End View (A-23)
        • (Cylinder 2, 3) Heated Oxygen Sensor (Rear) Connector End View (B-34)
        • Rear Wheel Speed Sensor LH Connector End View (F-12) (Eclipse Spyder)
        • Curtain Air Bag Module (Squib) (LH) Connector End View (D-11)
        • Crankshaft Position Sensor Connector End View (B-125)
        • Passenger Air Bag Off Indicator Light Connector End View (C-05)
        • (Cylinder 2, 3) Heated Oxygen Sensor (Front) Connector End View (B-35)
        • Windshield Washer Motor Connector End View
        • Convertible Top Switch Connector End View (C-30)
        • Liftgate Switch Connector End View
        • Clock Spring (C-303) And Remote Controlled Radio Switch (RH) Connector End View (C-301)
        • A/C-ECU Connector End View (C-20)
        • A/C Compressor Clutch Relay Connector End View (B-17X)
        • ETACS-ECU Connector End View (C-219)
        • G And Yaw Rate Sensor Connector End View (C-32)
        • Accelerator Pedal Position Sensor Connector End View (C-22)
        • Front Impact Sensor (RH) Connector End View (A-30)
        • Hood Switch Connector End View (A-37)
        • Short Stroke Switch (LH) Connector End View (E-18)
        • Fuel Pump Module Connector End View (D-19) (Eclipse)
        • Sunroof-ECU Connector End View (D-35)
        • Front-ECU Connector End View (A-13X, A-14X)
        • Door Switch Connector End View
        • Windshield And Rear Washer Motor Connector End View (A-32)
        • Side-Airbag Module (RH) Connector End View (D-28)
        • Hands Free Module Connector End View (C-35)
        • Multi-Center Display Unit Connector End View (C-06)
        • Rear Combination Light (LH) Connector End View (F-14) (Eclipse Spyder)
        • Reduction Solenoid Valve Connector End View (B-111-6)
        • TCL Switch Connector End View
        • Front Fog Light (RH) Connector End View (A-31)
        • Ignition Coil Connector End View (B-101, B-102, B-121 Or B-122)
        • Remote Controlled Radio Switch Connector End View
        • Combination Meter Connector End View (C-101)
        • Manifold Absolute Pressure Sensor Connector End View (B-02)
        • A/C-ECU Connector End View (C-14)
        • Rear Window Defogger Connector End View (F-01) (Eclipse)
        • Intermediate Connector (A-15) Connector End View
        • Front Seat Belt Retractor Connector End View (D-17)
        • A/C-ECU Connector End View (C-15, C-20)
        • CD Changer Connector End View (C-119)
        • Door Switch (LH) Connector End View (D-15) (Eclipse)
        • Clock Spring Connector End View (C-307 And C-305)
        • Short Stroke Switch (RH) Connector End View (E-17)
        • Convertible Top Control Module Connector End View (D-46)
        • Inside Rear View Mirror Assembly Connector End View (D-49) (Eclipse Spyder)
        • Headlight Leveling Switch Connector End View
        • Power Transistor Connector End View (C-107)
        • Potentiometer Connector End View (C-109)
        • Liftgate Lock Release Handle Connector End View (F-06)
        • TPMS Receiver Connector End View (C-211)
        • A/T Control Solenoid Valve Connector End View
        • Power Window Main Switch Connector End View (E-14)
        • Engine Oil Control Valve Connector End View (B-32)
        • Rear View Camera Connector End View (F-34) (Eclipse)
        • Intermediate Connector (C-09) Connector End View
        • ECM (M/T) Or PCM (A/T) Connector End View (B-22)
        • Parking Brake Switch Connector End View (C-16)
        • MFI Relay Connector End View (B-16X)
        • Tweeter (RH) (C-110) And Radio And CD Player Connector End View (C-117)
        • Power Window Relay Connector End View (C-207)
        • Rear Wiper Motor Connector End View (F-03)
        • Wheel Speed Sensor Connector End View
        • Fuel Pump Module Connector End View (D-19) (Eclipse Spyder)
        • Variable Intermittent Wiper Control Switch Connector End View
        • Transmission Range Switch Connector End View
        • Intermediate Connector (C-09) And Audio Amplifier Connector End View (C-114)
        • Junction Block Connector (C-208) Connector End View
        • Rear Window Defogger Relay Connector End View (C-205)
        • Remote Controlled Radio Switch Connector End View (RH)
        • Rear Combination Light (RH) Connector End View (F-07) (Eclipse Spyder)
        • Overdrive Solenoid Valve Connector End View (B-111-3)
        • Convertible Top Control Module (D-45) And Tonneau Sensor Connector End View (D-39)
        • Sunroof Motor Assembly Connector End View (D-35)
        • Intermediate Connector (C-24) Connector End View
        • Liftgate Lock Actuator Connector End View (F-11)
        • Front Fog Light (LH) Connector End View (A-24)
        • Intermediate Connector (C-10) Connector End View
        • Occupant Classification ECU Connector End View (D-26)
        • A/C-ECU Connector End View (C-15)
        • Fuel Pump Relay (1) Connector End View (C-214)
        • ETACS-ECU Connector End View (C-218)
        • Rear Wheel Speed Sensor LH Connector End View (F-12) (Eclipse)
        • PCM Connector End View (B-19)
        • Auto-Cruise Control Switch Connector End View (C-302)
        • ECM Connector End View (B-21)
        • Power Window Sub Switch Connector End View (E-08)
        • Rear View Camera Connector End View (F-34) (Eclipse Spyder)
        • Throttle Actuator Control Motor Relay Connector End View (B-13X)
        • Quarter Speaker (RH) Connector End View (D-05) (Eclipse)
        • Inside Rear View Mirror Assembly Connector End View (D-04)
        • Throttle Actuator Control Motor Connector End View (B-06)
        • Fuel Pump Relay (2) Connector End View (C-212)
        • Blower Switch Connector End View (C-12)
        • Stoplight Switch Connector End View (C-103)
        • EGR Valve Connector End View (B-105)
        • Seat Slide Sensor Connector End View (D-24)
        • Condenser Fan Relay Connector End View (A-19X)
        • Tweeter (LH) Connector End View (C-131)
        • 5-Bow Sensor (F-16 & F-22) And Convertible Top Control Module Connector End View (F-27)
        • Convertible Top Relay Connector End View (D-44)
        • Power Seat Switch Connector End View
        • Intake Air Temperature Sensor Connector End View
        • A/C-ECU Connector End View (C-19)
        • Combination Meter Connector End View (C-04)
        • Horn (High) Connector End View (A-25)
        • Input Shaft Speed Sensor Connector End View (B-112)
        • Satellite Radio Tuner Connector End View (D-48) (Eclipse Spyder)
        • ECM And PCM Connector End View
        • Power Steering Pressure Switch Connector End View (B-30)
        • 5-Bow Sensor Connector End View (F-22)
        • Mass Airflow Sensor Connector End View (B-09)
        • ECM Or PCM Connector End View (B-20)
        • Backup Light Switch Connector End View
        • Second Solenoid Valve Connector End View (B-111-2)
        • Blower Relay Connector End View
        • Convertible Top Motor Connector End View (D-41)
        • TPMS Receiver Connector End View (C-133)
        • Low-Reverse Solenoid Valve Connector End View (B-111-5)
        • Headlight (RH) Connector End View (A-35)
        • ECM Connector End View (B-18)
        • Clock Spring Connector End View (D-306)
        • Data Link Connector End View (C-125)
        • Junction Block Connector (C-203) Connector End View
        • Rear Window Defogger Connector End View (F-01) (Eclipse Spyder)
        • Intermediate Connector (C-23) Connector End View
        • Front Turn-Signal Light (RH) Connector End View (A-43)
        • SRS-ECU Connector End View
        • Junction Block Connector (C-215) Connector End View
        • Convertible Top Position Switch Connector End View (F-29)
        • ETACS-ECU Connector End View (C-217)
        • Output Shaft Speed Sensor Connector End View (B-108)
        • Quarter Speaker (LH) Connector End View (D-14) (Eclipse)
        • A/C-ECU Connector End View (C-14 Or C-15)
        • Control Solenoid Valve Assembly Connector End View (B-111)
        • Front Combination Light (RH) Connector End View (A-36)
        • Transmission Range Switch Connector End View (B-113)
        • Vehicle Speed Sensor Connector End View (B-104)
        • Hands Free Module Connector End View (C-34)
        • SRS-ECU Connector End View (C-124)
        • Liftgate Lock Release Handle Connector End View
        • Front Wheel Speed Sensor RH Connector End View (A-01)
        • Lighting Switch And Windshield Wiper Switch Connector End View
        • Seat Belt Switch (Driver's Side) Connector End View (D-22)
        • Tonneau Latch Switch Connector End View (F-28)
        • Woofer Connector End View (D-12) (Eclipse)
        • Fan Control Module Connector End View (A-22)
        • Door Mirror Control Switch Connector End View
        • Passenger's Seat Belt Switch Connector End View (D-25)
        • Generator Connector End View (B-120)
        • Driver Seat Belt Pre-Tensioner Connector End View (D-16)
        • 5-Bow Sensor (UP) Connector End View (F-23)
        • Tweeter (RH) (C-111) And CD Changer Connector End View (C-117)
    • OEM Circuit Diagrams
      • How To Read Circuit Diagrams
        • Notes
        • Connector/Grounding Indications
        • Symbols (Except Connector And Grounding)
        • Wire Color Codes
      • Junction Block
      • Joint Connector
      • Centralized Junction
        • Fusible Link And Fuse
        • Centralized Relay
      • Power Distribution System <Eclipse (Vehicles With Halogen Type Headlight)>
      • Power Distribution System <Eclipse (Vehicles With Discharge Type Headlight)>
      • Power Distribution System <Eclipse SPYDER (Vehicles With Halogen Type Headlight)>
      • Power Distribution System <Eclipse SPYDER (Vehicles With Discharge Type Headlight)>
      • Starting System <M/T>
      • Starting System <A/T>
      • Ignition System <2.4L Engine>
      • Ignition System <3.8L Engine>
      • Charging System
      • MULTIPORT Fuel Injection (MFI) System <2.4L Engine-M/T>
      • MULTIPORT Fuel Injection (MFI) System <2.4L Engine-A/T>
      • MULTIPORT Fuel Injection (MFI) System <3.8L Engine-M/T>
      • MULTIPORT Fuel Injection (MFI) System <3.8L Engine-A/T>
      • Cooling System <2.4L Engine>
      • Cooling System <3.8L Engine>
      • INVECS-II 4A/T <2.4L Engine (Vehicles With Halogen Type Headlight)>
      • INVECS-II 4A/T <2.4L Engine (Vehicles With Discharge Type Headlight)>
      • INVECS-II 5A/T <3.8L Engine>
      • Headlight <Halogen Type>
      • Headlight <Discharge Type>
      • Headlight Leveling System
      • Taillight, Position Light And License Plate Light <Vehicles With Halogen Type Headlight>
      • Taillight, Position Light And License Plate Light <Vehicles With Discharge Type Headlight>
      • Fog Light <Vehicles With Halogen Type Headlight>
      • Fog Light <Vehicles With Discharge Type Headlight>
      • Front Dome Light, Rear Dome Light, Luggage Compartment Light And Ignition Key Hole Illumination Light <Eclipse>
      • Front Dome Light And Ignition Key Hole Illumination Light <Eclipse SPYDER>
      • Glove Box Light
      • Vanity Mirror Light
      • Turn-Signal Light And Hazard Warning Light <Vehicles With Halogen Type Headlight>
      • Turn-Signal Light And Hazard Warning Light <Vehicles With Discharge Type Headlight>
      • Backup Light <M/T>
      • Backup Light <A/T>
      • Stoplight
      • Horn
      • Meter And Gauge <M/T (Vehicles With Halogen Type Headlight)>
      • Meter And Gauge <M/T (Vehicles With Discharge Type Headlight)>
      • Meter And Gauge <A/T (Vehicles With Halogen Type Headlight)>
      • Meter And Gauge <A/T (Vehicles With Discharge Type Headlight)>
      • Brake Warning Light, Oil Pressure Warning Light, Fuel Warning Light
      • Power Windows <Eclipse>
      • Power Windows <Eclipse SPYDER>
      • Central Door Locking System <Eclipse>
      • Central Door Locking System <Eclipse SPYDER>
      • Manual Air Conditioning System <2.4L Engine (Vehicles With Halogen Type Headlight)>
      • Manual Air Conditioning System <2.4L Engine (Vehicles With Discharge Type Headlight)>
      • Automatic Air Conditioning System <3.8L Engine>
      • Windshield Wiper And Washer <Eclipse-M/T>
      • Windshield Wiper And Washer <Eclipse-A/T>
      • Windshield Wiper And Washer <Eclipse SPYDER-M/T>
      • Windshield Wiper And Washer <Eclipse SPYDER-A/T>
      • Rear Wiper And Washer <M/T>
      • Rear Wiper And Washer <A/T>
      • Rear Window Defogger And Door Mirror Heater <Eclipse (Vehicles With Halogen Type Headlight)>
      • Rear Window Defogger And Door Mirror Heater <Eclipse (Vehicles With Discharge Type Headlight)>
      • Rear Window Defogger And Door Mirror Heater <Eclipse SPYDER (Vehicles With Halogen Type Headlight)>
      • Rear Window Defogger And Door Mirror Heater <Eclipse SPYDER (Vehicles With Discharge Type Headlight)>
      • Remote Controlled Mirror
      • Automatic Anti-Dazzling Mirror
      • Audio System <Vehicles Without Audio Amplifier>
      • Audio System <Vehicles With Audio Amplifier (Eclipse)>
      • Audio System <Vehicles With Audio Amplifier (Eclipse SPYDER)>
      • Accessory Socket
      • Multi-Center Display
      • Sunroof
      • Auto-Cruise Control System <2.4L Engine-M/T>
      • Auto-Cruise Control System <2.4L Engine-A/T>
      • Auto-Cruise Control System <3.8L Engine-M/T>
      • Auto-Cruise Control System <3.8L Engine-A/T>
      • Electronic Brake-Force Distribution (EBD), Anti-Lock Braking System (Abs) And Active Stability Control System (ASC) <Vehicles With Halogen Type Headlight>
      • Electronic Brake-Force Distribution (EBD), Anti-Lock Braking System (Abs) And Active Stability Control System (ASC) <Vehicles With Discharge Type Headlight>
      • Engine Immobilizer System <2.4L Engine-M/T>
      • Engine Immobilizer System <2.4L Engine-A/T>
      • Engine Immobilizer System <3.8L Engine-M/T>
      • Engine Immobilizer System <3.8L Engine-A/T>
      • Supplemental Restraint System (SRS) <Vehicles With Halogen Type Headlight>
      • Supplemental Restraint System (SRS) <Vehicles With Discharge Type Headlight>
      • Power Seat
      • Heated Seat <Vehicles With Halogen Type Headlight>
      • Heated Seat <Vehicles With Discharge Type Headlight>
      • Theft-Alarm System
      • Tire Pressure Monitoring System (TPMS)
      • Hands-Free Cellular Phone System
      • Rear View Camera
      • Forgotten Key Prevention Function
      • Lighting Monitor Tone Alarm
      • Ignition Key Reminder Tone Alarm
      • Seat Belt Warning Tone Alarm
      • Door Ajar Warning Tone Alarm <M/T>
      • Door Ajar Warning Tone Alarm <A/T>
      • Spare Connector (For Remote Controlled Engine Starter) <A/T>
      • Controller Area Network (Can) <2.4L Engine-M/T>
      • Controller Area Network (Can) <2.4L Engine-A/T>
      • Controller Area Network (Can) <3.8L Engine-M/T>
      • Controller Area Network (Can) <3.8L Engine-A/T>
      • Convertible Top
    • System Wiring Diagrams
      • Using lemon2025'S Wiring Diagrams
      • Air Conditioning
      • Anti-Lock Brakes
      • Anti-Theft
      • Body Control Modules
      • Computer Data Lines
      • Cooling Fan
      • Cruise Control
      • Defoggers
      • Engine Performance
        • 2.4L
        • 3.8L
      • Exterior Lights
      • Ground Distribution
      • Headlights
      • Horn
      • Instrument Cluster
      • Interior Lights
      • Navigation
      • Power Distribution
      • Power Door Locks
      • Power Mirrors
      • Power Seats
      • Power Top/Sunroof
      • Power Windows
      • Radio
      • Starting/Charging
      • Supplemental Restraints
      • Transmission
      • Trunk, Tailgate, Fuel Door
      • Warning Systems
      • Wiper/Washer
    • Using lemon2025'S System Wiring Diagrams
      • Introduction
      • Wiring Diagram Features And Controls
      • Wiring Diagram Color Abbreviations
      • Wiring Diagram Symbols
      • Wiring Diagram Ground Number Locations
      • Wiring Diagram Component Locations
• Engine Mechanical
  • Cooling System (Mechanical)
    • Engine Cooling System
      • General Description
        • Notes
        • Construction Diagram
      • Special Tools
      • Engine Cooling Diagnosis
        • Introduction
        • Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Coolant Leak
            • Diagnosis
          • INSPECTION PROCEDURE 2: Engine Overheating
            • Diagnosis
          • INSPECTION PROCEDURE 3: Radiator Fan and Condenser Fan do not Operate <3.8L Engine>
            • Notes
            • Circuit Operation
            • Technical Description
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 4: Radiator Fan and Condenser Fan do not Change Speed or Stop <3.8L Engine>
            • Notes
            • Radiator Fan And Condenser Fan Drive Circuit
            • Circuit Operation
            • Technical Description
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 5: Radiator Fan does not Operate <3.8L Engine>
            • Technical Description
            • Troubleshooting Hint
            • Diagnosis
          • INSPECTION PROCEDURE 6: Condenser Fan does not Operate <3.8L Engine>
            • Radiator Fan and Condenser Fan Drive Circuit
            • Circuit Operation
            • Technical Description
            • Troubleshooting Hints
            • Diagnosis
      • On-Vehicle Service
        • Engine Coolant Leak Check
        • Radiator Cap Pressure Check
        • Engine Coolant Replacement
        • Engine Coolant Concentration Test
        • Fan Control Relay Continuity Check
        • Radiator Fan Relay Check <2.4L Engine>
        • Fan Control Module Check <3.8L Engine>
        • Cooling Fan Motor Check <2.4L Engine>
      • Radiator
        • Removal And Installation
          • <2.4L Engine>
          • <3.8L Engine>
          • Removal Service Points
            • <<A>> Radiator Upper Hose/Radiator Lower Hose Disconnection
            • <<B>> Transmission Fluid Cooler Line Hose Removal
          • Installation Service Point
            • >>A<< Radiator Lower Hose/Radiator Upper Hose Connection
      • Thermostat
        • Removal And Installation <2.4L Engine>
          • Notes
          • Removal Service Point
            • <<A>> Radiator Lower Hose Disconnection
          • Installation Service Points
            • >>A<< Thermostat Installation
            • >>B<< Radiator Lower Hose Connection
        • Removal And Installation <3.8L Engine>
          • Notes
          • Removal Service Point
            • <<A>> Radiator Lower Hose Disconnection
          • Installation Service Points
            • >>A<< Thermostat Installation
            • >>B<< Radiator Lower Hose Connection
        • Inspection
          • Thermostat Check
      • Water Pump
        • Removal And Installation <2.4L Engine>
          • Notes
          • Installation Service Point
            • >>A<< O-Ring Installation
        • Removal And Installation <3.8L Engine>
          • Notes
          • Installation Service Point
            • >>A<< O-Ring Installation
      • Water Hose And Water Pipe
        • Removal And Installation <2.4L Engine>
          • Notes
          • Removal Service Point
            • <<A>> Radiator Upper Hose Disconnection
          • Installation Service Points
            • >>A<< O-Rings Installation
            • >>B<< Thermostat Case/Water Outlet Fitting Installation
            • >>C<< Radiator Upper Hose Connection
        • Removal And Installation <3.8L Engine>
          • Notes
          • Removal Service Point
            • <<A>> Radiator Upper Hose Disconnection
          • Installation Service Points
            • >>A<< O-Ring Installation
            • >>B<< Engine Coolant Temperature Sensor Installation
            • >>C<< Radiator Upper Hose Connection
        • Inspection
          • Water Pipe and Hose Check
      • Specifications
        • Fastener Tightening Specifications
        • Service Specification
        • Capacities
        • Sealants
          • <2.4L Engine>
          • <3.8L Engine>
  • Engine Intake System & Exhaust System
    • General Description
    • Intake And Exhaust Diagnosis
      • Service Specification
      • Introduction
      • Troubleshooting Strategy
      • Symptom Chart
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: Exhaust Leakage
          • Diagnosis
        • INSPECTION PROCEDURE 2: Abnormal Noise
          • Diagnosis
    • Special Tools
    • Air Cleaner
      • Removal And Installation <2.4L Engine>
      • Removal And Installation <3.8L Engine>
    • Intake Manifold Plenum
      • Removal And Installation <3.8L Engine>
        • Notes
        • Installation Service Points
          • >>A<< Exhaust Gas RECIRCULATION Valve Gasket Installation
          • >>B<< Intake Manifold Plenum Installation
    • Intake Manifold
      • Removal And Installation <2.4L Engine>
        • Notes
        • Removal Service Point
          • <<A>> Radiator Lower Hose Disconnection
        • Installation Service Points
          • >>A<< Brake Booster Vacuum Hose Connection
          • >>B<< Exhaust Gas RECIRCULATION Valve Gasket Installation
          • >>C<< Thermostat Case Assembly Installation
          • >>D<< Radiator Lower Hose Connection
      • Removal And Installation <3.8L Engine>
        • Notes
        • Removal Service Points
          • <<A>> Fuel High-Pressure Hose Disconnection
          • <<B>> Fuel Rail And Fuel Injector Assembly Removal
        • Installation Service Points
          • >>A<< Intake Manifold Gasket Installation
          • >>B<< Intake Manifold Installation
          • >>C<< Fuel Rail And Fuel Injector Assembly Installation
          • >>D<< Fuel High-Pressure Hose Connection
      • Inspection
        • Notes
        • Intake Manifold Check
    • Exhaust Manifold
      • Removal And Installation <2.4L Engine>
        • Notes
        • Removal Service Point
          • <<A>> Heated Oxygen Sensor Removal
        • Installation Service Point
          • >>A<< Heated Oxygen Sensor Installation
      • Removal And Installation <3.8L Engine>
        • <Left Bank>
        • <Right Bank>
        • Removal Service Points
          • <<A>> Left Bank Heated Oxygen Sensor (Front)/Right Bank Heated Oxygen Sensor (Front) Removal
          • <<B>> Left Bank Heated Oxygen Sensor (Rear)/Right Bank Heated Oxygen Sensor (Rear) Removal
        • Installation Service Points
          • >>A<< Right Bank Heated Oxygen Sensor (Rear)/Left Bank Heated Oxygen Sensor (Rear) Installation
          • >>B<< Right Bank Heated Oxygen Sensor (Front)/Left Bank Heated Oxygen Sensor (Front) Installation
      • Inspection
        • Notes
        • Exhaust Manifold Check
    • Exhaust Pipe And Main Muffler
      • Removal And Installation <2.4L Engine>
        • Notes
        • Removal Service Point
          • <<A>> Heated Oxygen Sensor Removal
        • Installation Service Point
          • >>A<< Heated Oxygen Sensor Installation
      • Removal And Installation <3.8L Engine>
    • Specifications
      • Fastener Tightening Specifications
      • Sealants
  • Fuel System
    • Fuel Supply System
      • General Description
        • Notes
        • Construction Diagram
      • Fuel Supply Diagnosis
        • Introduction
        • Troubleshooting Strategy
        • Symptom Procedures
          • INSPECTION PROCEDURE 1 : Engine Malfunctions Due to Insufficient Fuel Supply
            • TROUBLESHOOTING HINTS (The most likely causes for this case:)
            • Diagnosis
      • Special Tools
      • On-Vehicle Service
        • Fuel Level Sensor Check
        • Fuel Level Sensor Replacement
          • <Fuel Level Sensor (Main)>
          • <Fuel Level Sensor (Sub)>
        • Fuel Pump Operation Check
        • Fuel Pump Module Replacement
        • Fuel Tank Differential Pressure Sensor Check
        • Leveling Valve Check
      • Fuel Tank
        • Removal And Installation
          • <Fuel Tank Assembly>
          • <Fuel Tank Filler Tube>
          • Removal Service Points
            • <<A>> Fuel Pump Module Connector/Fuel Tank Differential Pressure Sensor Connector Disconnection
            • <<B>> Fuel Level Sensor (Sub) Connector Disconnection
            • <<C>> Fuel High-Pressure Hose Disconnection
            • <<D>> Fuel Tank Band/Fuel Tank Assembly Removal
          • Installation Service Points
            • >>A<< Fuel Tank Assembly/Fuel Tank Band Installation
            • >>B<< Fuel High-Pressure Hose Connection
        • Disassembly And Assembly
          • <Fuel Tank Assembly>
          • Removal Service Points
            • <<A>> Fuel Pump Module Removal
            • <<B>> Fuel Level Sensor (Sub) Removal
          • Installation Service Points
            • >>A<< Fuel Level Sensor (Sub) Installation
            • >>B<< Fuel Pump Module Installation
            • >>C<< Fuel High-Pressure Hose Connection
          • Notes
          • <Fuel Pump Module>
        • Inspection
          • Fuel Tank Shut-Off Valve Check
      • Specifications
        • Fastener Tightening Specification
        • Service Specification
  • Lubrication System
    • Engine Lubrication
      • General Description
        • Notes
        • Engine Oils
        • Recommended Precautions
      • Special Tools
      • On-Vehicle Service
        • Engine Oil Check
        • Engine Oil Replacement
        • Engine Oil Filter Replacement
        • Engine Oil Pressure Check
      • Engine Oil Pressure Switch
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Engine Oil Pressure Switch Removal
          • Installation Service Point
            • >>A<< Engine Oil Pressure Switch Installation
      • Specifications
        • Fastener Tightening Specifications
        • Service Specifications
        • Sealant
        • Lubricants
          • Notes
          • Engine Oil
  • Mechanical
    • Engine Intake System & Exhaust System
      • General Description
      • Intake And Exhaust Diagnosis
        • Service Specification
        • Introduction
        • Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Exhaust Leakage
            • Diagnosis
          • INSPECTION PROCEDURE 2: Abnormal Noise
            • Diagnosis
      • Special Tools
      • Air Cleaner
        • Removal And Installation <2.4L Engine>
        • Removal And Installation <3.8L Engine>
      • Intake Manifold Plenum
        • Removal And Installation <3.8L Engine>
          • Notes
          • Installation Service Points
            • >>A<< Exhaust Gas RECIRCULATION Valve Gasket Installation
            • >>B<< Intake Manifold Plenum Installation
      • Intake Manifold
        • Removal And Installation <2.4L Engine>
          • Notes
          • Removal Service Point
            • <<A>> Radiator Lower Hose Disconnection
          • Installation Service Points
            • >>A<< Brake Booster Vacuum Hose Connection
            • >>B<< Exhaust Gas RECIRCULATION Valve Gasket Installation
            • >>C<< Thermostat Case Assembly Installation
            • >>D<< Radiator Lower Hose Connection
        • Removal And Installation <3.8L Engine>
          • Notes
          • Removal Service Points
            • <<A>> Fuel High-Pressure Hose Disconnection
            • <<B>> Fuel Rail And Fuel Injector Assembly Removal
          • Installation Service Points
            • >>A<< Intake Manifold Gasket Installation
            • >>B<< Intake Manifold Installation
            • >>C<< Fuel Rail And Fuel Injector Assembly Installation
            • >>D<< Fuel High-Pressure Hose Connection
        • Inspection
          • Notes
          • Intake Manifold Check
      • Exhaust Manifold
        • Removal And Installation <2.4L Engine>
          • Notes
          • Removal Service Point
            • <<A>> Heated Oxygen Sensor Removal
          • Installation Service Point
            • >>A<< Heated Oxygen Sensor Installation
        • Removal And Installation <3.8L Engine>
          • <Left Bank>
          • <Right Bank>
          • Removal Service Points
            • <<A>> Left Bank Heated Oxygen Sensor (Front)/Right Bank Heated Oxygen Sensor (Front) Removal
            • <<B>> Left Bank Heated Oxygen Sensor (Rear)/Right Bank Heated Oxygen Sensor (Rear) Removal
          • Installation Service Points
            • >>A<< Right Bank Heated Oxygen Sensor (Rear)/Left Bank Heated Oxygen Sensor (Rear) Installation
            • >>B<< Right Bank Heated Oxygen Sensor (Front)/Left Bank Heated Oxygen Sensor (Front) Installation
        • Inspection
          • Notes
          • Exhaust Manifold Check
      • Exhaust Pipe And Main Muffler
        • Removal And Installation <2.4L Engine>
          • Notes
          • Removal Service Point
            • <<A>> Heated Oxygen Sensor Removal
          • Installation Service Point
            • >>A<< Heated Oxygen Sensor Installation
        • Removal And Installation <3.8L Engine>
      • Specifications
        • Fastener Tightening Specifications
        • Sealants
    • Engine Mechanical - 2.4L
      • General Description
      • Engine Diagnosis
      • Special Tools
      • On-Vehicle Service
        • Drive Belt Tension Check
        • Auto-TENSIONER Check
          • Operation Check
          • Function Check
        • Valve Clearance Check And Adjustment
        • Rocker Arm Piston Operation Check
        • Ignition Timing Check
        • Curb Idle Speed Check
        • Idle Mixture Check
        • Compression Pressure Check
        • Manifold Vacuum Check
      • Engine Assembly
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Drive Belt Removal
            • <<B>> Power Steering Oil Pump And Bracket Assembly Removal
            • <<C>> A/C Compressor And Clutch Assembly Removal
            • <<D>> ATF Warmer (Transmission Fluid Cooler) And Bracket Assembly Removal
            • <<E>> Fuel High-Pressure Hose Disconnection
            • <<F>> Transaxle Assembly Removal
            • <<G>> Power Steering Oil Reservoir Removal
            • <<H>> Engine Front Mounting Bracket Removal
            • <<I>> Engine Assembly Removal
          • Installation Service Points
            • >>A<< Engine Assembly Installation
            • >>B<< Engine Front Mounting Bracket Installation
            • >>C<<Transaxle Assembly Installation
            • >>D<< Fuel High-Pressure Hose Connection
            • >>E<< Drive Belt Installation
            • >>F<< Brake Booster Vacuum Hose Connection
      • Crankshaft Pulley
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Drive Belt Removal
          • Installation Service Point
            • >>A<< Drive Belt Installation
      • Camshaft And Valve Stem Seal
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Camshaft Sprocket Removal
            • <<B>> Exhaust Rocker Arm And Shaft Assembly/Intake Rocker Arm And Shaft Assembly Removal
            • <<C>> Camshaft Removal
            • <<D>> Valve Spring Retainer Locks Removal
          • Installation Service Points
            • >>A<< Valve Stem Seals Installation
            • >>B<< Exhaust Valve Springs/Intake Valve Springs Installation
            • >>C<< Valve Spring Retainer Locks Installation
            • >>D<< Camshaft Installation
            • >>E<< Intake Rocker Arm And Shaft Assembly/Intake Rocker Arm Shaft Caps Installation
            • >>F<< Exhaust Rocker Arm And Shaft Assembly/Exhaust Rocker Arm Shaft Caps Installation
            • >>G<< Camshaft Oil Seal Installation
            • >>H<< Camshaft Sprocket Installation
            • >>I<< Camshaft Position Sensor Support Installation
            • >>J<< Engine Oil Pressure Switch Installation
            • >>K<< O-Ring/Engine Oil Control Valve Installation
      • Oil Pan
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Engine Oil Pan Removal
          • Installation Service Points
            • >>A<< Engine Oil Pan Installation
            • >>B<< Engine Oil Pan Drain Plug Gasket Installation
        • Inspection
      • Crankshaft Oil Seal
        • Removal And Installation
          • <M/T>
          • <A/T>
          • Removal Service Points
            • <<A>> Transaxle Assembly Removal
            • <<B>> Flywheel Bolts/A/T Drive Plate Bolts Removal
          • Installation Service Points
            • >>A<< Crankshaft Rear Oil Seal Installation
            • >>B<< Flywheel Bolts/A/T Drive Plate Bolts Installation
            • >>C<< Crankshaft Front Oil Seal Installation
            • >>D<< Crankshaft Balancer Shaft Drive Sprocket Installation
      • Cylinder Head Gasket
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Camshaft Sprocket Removal
            • <<B>> Radiator Upper Hose Disconnection
            • <<C>> Fuel High-Pressure Hose Disconnection
            • <<D>> Cylinder Head Bolts Removal
          • Installation Service Points
            • >>A<< Cylinder Head Gasket Installation
            • >>B<< Cylinder Head Bolts Installation
            • >>C<< Fuel High-Pressure Hose Connection
            • >>D<< Radiator Upper Hose Connection
            • >>E<< Camshaft Sprocket Installation
            • >>F<< Brake Booster Vacuum Hose Connection
      • Timing Belt
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Valve Timing Belt Removal
            • <<B>> Crankshaft Pulley Center Bolt/Crankshaft Pulley Washer/Crankshaft Camshaft Drive Sprocket Removal
            • <<C>> Balancer Timing Belt Removal
          • Installation Service Points
            • >>A<< Balancer Timing Belt/Balancer Timing Belt TENSIONER Installation
            • >>B<< Balancer Timing Belt Tension Adjustment
            • >>C<< Crankshaft Angle Sensing Blade/Crankshaft Camshaft Drive Sprocket/Crankshaft Pulley Washer/Crankshaft Pulley Center Bolt Installation
            • >>D<< Timing Belt TENSIONER Adjuster Installation
            • >>E<< Timing Belt TENSIONER Pulley Installation
            • >>F<< Valve Timing Belt Installation
            • >>G<< Valve Timing Belt Tension Adjustment
        • Inspection
          • Timing Belt TENSIONER Adjuster Check
          • Balancer Timing Belt Tension Check
      • Specifications
        • Fastener Tightening Specifications
        • Service Specifications
        • Sealants
    • Engine Overhaul - 2.4L
      • Special Tools
      • Generator And Ignition System
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Spark Plug Removal
            • <<B>> Camshaft Position Sensing Cylinder Removal
          • Installation Service Point
            • >>A<< Camshaft Position Sensing Cylinder Installation
            • >>B<< Camshaft Position Sensor Support Installation
            • >>C<< Spark Plug Installation
            • >>D<< Crankshaft Pulley Tightening
      • Exhaust Manifold
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Oxygen Sensor Removal
          • Installation Service Point
            • >>A<< Exhaust Manifold Bracket "B" Installation
            • >>B<< Oxygen Sensor/Exhaust Manifold Cover Installation
      • Timing Belt
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Timing Belt Removal
            • <<B>> Oil Pump Sprocket Removal
            • <<C>> Crankshaft Bolt Loosening
            • <<D>> Crankshaft Sprocket Removal
            • <<E>> Timing Belt "B" Removal
            • <<F>> Counterbalance Shaft Sprocket Removal
            • <<G>> Crankshaft Sprocket "B" Removal
            • <<H>> Camshaft Sprocket Bolt Removal
          • Installation Service Points
            • >>A<< Camshaft Sprocket Bolt Installation
            • >>B<< Engine Support Bracket Installation
            • >>C<< Crankshaft Sprocket "B" Installation
            • >>D<< Spacer Installation
            • >>E<< Counterbalance Shaft Sprocket Installation
            • >>F<< Timing Belt "B" Installation
            • >>G<< Crankshaft Sensing Blade/Crankshaft Sprocket/Crankshaft Pulley Washer/Crankshaft Bolt Installation
            • >>H<< Oil Pump Sprocket Installation
            • >>I<< Auto-TENSIONER Installation
            • >>J<< TENSIONER Pulley Installation
            • >>K<< Timing Belt Installation
        • Inspection
          • Timing Belt
          • Auto-TENSIONER
          • Valve Clearance Adjustment
      • Fuel And Emission Parts
        • Removal And Installation
          • Notes
          • Installation Service Points
            • >>A<< Exhaust Gas RECIRCULATION Valve Gasket Installation
            • >>B<< Injectors Installation
            • >>C<< Throttle Body Gasket Installation
      • Intake Manifold And Water Pump
        • Removal And Installation
          • Notes
          • Installation Service Points
            • >>A<< Water Outlet Fitting Installation
            • >>B<< Sealant Application To Engine Coolant Temperature Sensor
            • >>C<< Sealant Application To Engine Oil Pressure Switch
            • >>D<< Sealant Application To Engine Oil Pressure Switch
            • >>E<< Thermostat Housing Installation
            • >>F<< Thermostat Installation
            • >>G<< Intake Manifold Stay Installation
            • >>H<< Water Inlet Pipe/O-Ring Installation
      • Rocker Arms And Camshaft
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Rocker Arms And Rocker Arm Shaft Removal
          • Installation Service Points
            • >>A<< Engine Oil Control Valve/O-Ring Installation
            • >>B<< Adjusting Screw Installation
            • >>C<< Rocker Shaft Spring/Rocker Arms And Rocker Arm Shaft Installation
            • >>D<< Camshaft Oil Seal Installation
        • Inspection
          • Camshaft
      • Cylinder Head And Valves
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Cylinder Head Bolts Removal
            • <<B>> Retainer Lock Removal
          • Installation Service Points
            • >>A<< Valve Stem Seal Installation
            • >>B<< Valve Spring Installation
            • >>C<< Retainer Lock Installation
            • >>D<< Cylinder Head Bolt Installation
        • Inspection
          • Cylinder Head
          • Valve
          • Valve Spring
          • Valve Guide
          • Valve Seat
          • Valve Seat Reconditioning Procedure
          • Valve Seat Replacement Procedure
          • Valve Guide Replacement Procedure
      • Oil Pan And Oil Pump
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Oil Pan Removal
            • <<B>> Plug Removal
            • <<C>> Flange Bolt Removal
            • <<D>> Counterbalance Shaft Front Bearing Removal
            • <<E>> Counterbalance Shaft Rear Bearing Removal
          • Installation Service Points
            • >>A<< Left Counterbalance Shaft Rear Bearing Installation
            • >>B<< Right Counterbalance Shaft Rear Bearing Installation
            • >>C<< Counterbalance Shaft Front Bearing Installation
            • >>D<< Counterbalance Shaft Oil Seal Installation
            • >>E<< Oil Pump Oil Seal Installation
            • >>F<< Crankshaft Front Oil Seal Installation
            • >>G<< Oil Pump Driven Gear/Oil Pump Drive Gear Installation
            • >>H<< Oil Pump Case Installation
            • >>I<< Flange Bolt Installation
            • >>J<< Plug Installation
            • >>K<< Oil Pan Installation
            • >>L<< Drain Plug Gasket Installation
            • >>M<< Oil Filter Installation
        • Inspection
          • Front Case
          • Oil Seal
          • Counterbalance Shaft
          • Oil Pump
      • Piston And Connecting Rod
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Connecting Rod Cap Removal
            • <<B>> Piston And Connecting Rod Assembly Removal
            • <<C>> Piston Pin Removal
          • Installation Service Points
            • >>A<< Piston Pin Installation
            • >>B<< Oil Ring Installation
            • >>C<< Piston Ring Number 2/Piston Ring Number 1 Installation
            • >>D<< Connecting Rod Bearing Installation
            • >>E<< Piston And Connecting Rod Installation
            • >>F<< Connecting Rod Cap Installation
            • >>G<< Connecting Rod Cap Nut Tightening
        • Inspection
          • Piston Ring
          • Crankshaft Pin Oil Clearance <PLASTIGAGE Method>
      • Crankshaft And Cylinder Block
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Flywheel Bolt/Drive Plate Bolt Loosening
          • Installation Service Points
            • >>A<< Crankshaft Thrust Bearing Installation
            • >>B<< Crankshaft Bearing Installation
            • >>C<< Bearing Cap/Bearing Cap Bolt Installation
            • >>D<< Oil Seal Installation
            • >>E<< Sealant Application To Oil Seal Case
            • >>F<< Flywheel Bolt/Drive Plate Bolt Installation
        • Inspection
          • Crankshaft Journal Oil Clearance <PLASTIGAGE Method>
          • Cylinder Block
          • Boring Cylinder
      • Specifications
        • Fastener Tightening Specifications
        • General Specifications
        • Service Specifications
        • Sealants
    • Power Plant Mount
      • General Description
        • Notes
        • Construction Diagram
          • <2.4L Engine>
          • <3.8L Engine>
      • Special Tool
      • Engine Mounting
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Power Steering Oil Reservoir Removal
      • Transaxle Mounting
        • Removal And Installation <2.4L Engine>
          • Notes
          • Installation Service Point
            • >>A<< Transaxle Mounting Stopper Installation
        • Removal And Installation <3.8L Engine>
          • Notes
          • Installation Service Point
            • >>A<< Transaxle Mounting Stopper Installation
      • Engine Roll Stopper And Center Member
        • Removal And Installation
          • Notes
          • Installation Service Points
            • >>B<< Engine Front Roll Stopper Bracket Installation
      • CROSSMEMBER
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Steering Column Assembly And Steering Gear Disconnection
            • <<B>> Self Locking Nuts (Connection For Tie Rod End And Lower Arm Ball Joint) Removal
            • <<C>> Front Axle CROSSMEMBER Stay Removal
            • <<D>> Engine Rear Roll Stopper Bracket, Power Steering Gear And Linkage, Stabilizer Bar And Front Axle No. 1 CROSSMEMBER Assembly Removal
          • Installation Service Points
            • >>A<< Stabilizer Bar Installation
            • >>B<< Engine Rear Roll Stopper Bracket, Power Steering Gear And Linkage, Stabilizer Bar And Front Axle No. 1 CROSSMEMBER Assembly Installation
            • >>C<< Front Axle CROSSMEMBER Stay/Self-Locking Nuts Installation
        • Inspection
      • Specifications
        • Fastener Tightening Specifications
  • Starter
    • Specifications [Engine Electrical]
      • Fastener Tightening Specifications
        • <2.4L Engine>
        • <3.8L Engine>
      • General Specifications
        • <2.4L Engine>
        • <3.8L Engine>
      • Service Specifications
    • Starting System
      • General Description
        • Notes
        • Operation
      • Starting System Diagnosis
        • Troubleshooting Hints
        • Troubleshooting Guide
      • On-Vehicle Service
        • Starter Relay Check <M/T>
      • Starter Motor Assembly
        • Removal And Installation <2.4L Engine>
          • <M/T>
          • <A/T>
          • Removal Service Points
            • <<A>> Clutch Release Cylinder Removal
            • <<B>> ATF Warmer (Transmission Fluid Cooler) And Bracket Assembly Removal
            • <<C>> Starter Assembly <M/T> Removal
            • <<D>> Starter Assembly <A/T> Removal
        • Removal And Installation <3.8L Engine>
          • Notes
          • Removal Service Point
            • <<A>> Starter Assembly Removal
        • Inspection
          • Pinion Gap Adjustment
          • Magnetic Switch Pull-In Test
          • Magnetic Switch Hold-In Test
          • Free Running Test
          • Magnetic Switch Return Test
          • Commutator Check
          • Brush Check
          • Overrunning Clutch Check
          • Front And Rear Bracket Bushing Check
          • Armature Check
        • Disassembly And Assembly
          • Notes
          • Disassembly Service Points
            • <<A>> Snap Ring And Stop Ring Removal
          • Starter Motor Part Cleaning
          • Assembly Service Point
            • >>A<< Stop Ring And Snap Ring Installation
  • Timing Belt Replacement (2.4L)
    • Model Applications
    • Manufacturer's Suggested Scheduled Maintenance
    • Special Tools
    • Timing Belt Components
    • Removal And Installation
      • Valve Timing Belt Removal
      • Balancer Timing Belt Removal
      • Balancer Timing Belt Installation
      • Valve Timing Belt Installation
    • Torque Specifications
• Engine Performance
  • Emissions
    • EGR Function Testing - CHRYSLER/MITSUBISHI
      • EGR Function Testing - CHRYSLER/MITSUBISHI
        • Test 1
          • 1974-84 (Ported EGR Valve)
        • Test 2
          • 1978-87 Carbureted (Dual EGR Valves)
        • Test 3
          • 1983-85 Multiport Fuel Injection (Ported EGR Valve)
        • Test 4
          • 1986 Colt & Colt Vista (Ported EGR Valve)
        • Test 5
          • 1986-88 Cordia & Tredia (Ported EGR Valve)
        • Test 6
          • 1987 Colt, Colt Vista, Mirage, Raider, Ram-50, Montero & Pickup (Ported EGR Valve)
        • Test 7
          • 1987-88 All Others (Ported EGR Valve)
        • Test 8
          • 1989-96 Colt Wagon 1.8L, Montero (A/T), Raider (A/T), Sigma, Van/Wagon & All Other Federal Models (Ported EGR Valve)
        • Test 9
          • 1989-96 Montero (M/T), Raider (M/T) & All Other California Models (Ported EGR Valve)
        • Test 10
    • Emission Applications
      • Emission Applications
    • Emission Control Abbreviations
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
    • State Emission Standards - Diesel
      • ARIZONA
      • Colorado
      • CONNECTICUT
      • IDAHO
      • KENTUCKY
      • MASSACHUSETTS
      • New YORK
      • OHIO
      • RHODE Island
      • UTAH
      • WASHINGTON
    • State Emission Standards - Gas
      • ALASKA
      • ARIZONA
      • CALIFORNIA
        • California Emission Standards ASM Tests
        • Legend
        • Pass/Fail Emission Standards = A+B / VTW
      • Colorado
      • CONNECTICUT
      • DELAWARE
      • District Of COLUMBIA
      • GEORGIA
      • IDAHO
      • ILLINOIS
      • INDIANA
      • KENTUCKY
      • MARYLAND
      • MASSACHUSETTS
      • MISSOURI
      • NEVADA
      • New Jersey
      • New MEXICO
      • New YORK
      • North CAROLINA
      • OHIO
      • OREGON
      • PENNSYLVANIA
      • RHODE Island
      • TENNESSEE
      • TEXAS
      • UTAH
      • VIRGINIA
      • WASHINGTON
      • WISCONSIN
      • U. S. EPA ASM2525 & ASM5015 Start-Up Emission Standards
      • U. S. EPA Revised Final ASM Emission Standards (ASM5015 & ASM2525)
      • U.S. EPA Im240 Emission Standards
        • Start-Up Standards
        • Final Standards
  • Engine Control Systems
    • Engine & Emissions Specifications
      • Fastener Tightening Specifications
      • Service Specifications
    • Engine Control System
      • General Description
        • Notes
        • Construction Diagram
      • Engine Control System Diagnosis
        • Introduction
        • Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Throttle Valve will not Fully Open or Close
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Case:)
            • Diagnosis
          • INSPECTION PROCEDURE 2: Accelerator Pedal Operation not Smooth (Over Acceleration)
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Case:)
            • Diagnosis
      • Special Tool
      • Accelerator Pedal
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Accelerator Stopper Installation
  • Fuel Delivery
    • Fuel Supply System
      • General Description
        • Notes
        • Construction Diagram
      • Fuel Supply Diagnosis
        • Introduction
        • Troubleshooting Strategy
        • Symptom Procedures
          • INSPECTION PROCEDURE 1 : Engine Malfunctions Due to Insufficient Fuel Supply
            • TROUBLESHOOTING HINTS (The most likely causes for this case:)
            • Diagnosis
      • Special Tools
      • On-Vehicle Service
        • Fuel Level Sensor Check
        • Fuel Level Sensor Replacement
          • <Fuel Level Sensor (Main)>
          • <Fuel Level Sensor (Sub)>
        • Fuel Pump Operation Check
        • Fuel Pump Module Replacement
        • Fuel Tank Differential Pressure Sensor Check
        • Leveling Valve Check
      • Fuel Tank
        • Removal And Installation
          • <Fuel Tank Assembly>
          • <Fuel Tank Filler Tube>
          • Removal Service Points
            • <<A>> Fuel Pump Module Connector/Fuel Tank Differential Pressure Sensor Connector Disconnection
            • <<B>> Fuel Level Sensor (Sub) Connector Disconnection
            • <<C>> Fuel High-Pressure Hose Disconnection
            • <<D>> Fuel Tank Band/Fuel Tank Assembly Removal
          • Installation Service Points
            • >>A<< Fuel Tank Assembly/Fuel Tank Band Installation
            • >>B<< Fuel High-Pressure Hose Connection
        • Disassembly And Assembly
          • <Fuel Tank Assembly>
          • Removal Service Points
            • <<A>> Fuel Pump Module Removal
            • <<B>> Fuel Level Sensor (Sub) Removal
          • Installation Service Points
            • >>A<< Fuel Level Sensor (Sub) Installation
            • >>B<< Fuel Pump Module Installation
            • >>C<< Fuel High-Pressure Hose Connection
          • Notes
          • <Fuel Pump Module>
        • Inspection
          • Fuel Tank Shut-Off Valve Check
      • Specifications
        • Fastener Tightening Specification
        • Service Specification
  • Ignition System
    • Ignition System
      • General Description
        • <2.4L Engine>
        • <3.8L Engine>
      • Special Tool
      • On-Vehicle Service
        • Knock Control System Check
          • Notes
          • <2.4L Engine>
          • <3.8L Engine>
        • Ignition Coil Check
          • Notes
          • Primary Coil And Ignition Power Transistor Continuity Check
          • Secondary Coil Check
        • Spark Plug Test
        • Spark Plug Check And Cleaning
          • Notes
          • Spark Plug Gap Check
            • <2.4L Engine>
            • <3.8L Engine>
          • Spark Plug Insulation Resistance Check
          • Spark Plug Cleaning
            • Notes
            • <When a sand blast type plug cleaner is used>
            • <When special tool MB992273 is used>
        • Camshaft Position Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
        • Crankshaft Position Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
      • Ignition Coil
        • Removal And Installation <2.4L Engine>
        • Removal And Installation <3.8L Engine>
      • Camshaft Position Sensor
        • Removal And Installation <2.4L Engine>
        • Removal And Installation <3.8L Engine>
      • Crankshaft Position Sensor
        • Removal And Installation <2.4L Engine>
        • Removal And Installation <3.8L Engine>
          • Notes
          • Installation Service Points
            • >>A<< Crankshaft Position Sensor Installation
            • >>B<< Clip Installation
      • Knock Sensor
        • Removal And Installation <2.4L Engine>
          • Notes
          • Removal Service Point
            • <<A>> Knock Sensor Removal
          • Installation Service Point
            • >>A<< Knock Sensor Installation
        • Removal And Installation <3.8L Engine>
          • Notes
          • Removal Service Point
            • <<A>> Knock Sensor Removal
          • Installation Service Points
            • >>A<< Knock Sensor Installation
            • >>B<< Clip Installation
    • Specifications [Engine Electrical]
      • Fastener Tightening Specifications
        • <2.4L Engine>
        • <3.8L Engine>
      • General Specifications
        • <2.4L Engine>
        • <3.8L Engine>
      • Service Specifications
  • Mode 6 - 1997-2012 MITSUBISHI
    • Introduction
    • 1997
    • 1998-2001
    • 2002-2003
    • 2004-2005
    • 2006-07 Eclipse & 2006 GALANT
    • 2006 Endeavor
    • 2007 GALANT & 2007 Endeavor
    • 2007 Outlander
    • 2008 Eclipse
    • 2008 Endeavor, 2008-10 GALANT, 2009-11 Eclipse & 2009-10 Outlander
    • 2008 Lancer
    • 2008 Outlander
    • 2009 Lancer
    • 2009 Lancer SPORTBACK
    • 2010 Lancer & Lancer SPORTBACK
    • 2011-12 GALANT, 2012 Eclipse & 2012 Outlander
    • 2011 Lancer, 2011 Lancer SPORTBACK & 2011 Outlander
    • 2012 Lancer & 2012 Lancer SPORTBACK
  • Specifications
    • Firing Order & Cylinder Identification
      • Firing Order & Cylinder Identification
        • Notes
        • 3 Cylinder Engine
        • 4 Cylinder Engine
        • V6 Engine
          • 3.7L V6 Engine
          • All Other V6 Engines Except 3.7L
        • V8 Engine
  • System
    • Ambient Air Temperature Sensor
      • Ambient Air Temperature Sensor
        • Removal And Installation
        • Inspection
    • Emission Control System
      • General Description
      • Diagnosis
      • Special Tools
      • Vacuum Hoses
        • Vacuum Hose Routing
          • <2.4L Engine>
          • <3.8L Engine>
        • Vacuum Circuit Diagram
          • <2.4L Engine>
          • <3.8L Engine>
        • Vacuum Hose Installation
        • Vacuum Hose Check
      • Positive Crankcase Ventilation System
        • General Description (Positive Crankcase Ventilation System)
          • Notes
          • System Diagram
            • <2.4L Engine>
            • <3.8L Engine>
        • Component Location
        • Positive Crankcase Ventilation System Check
        • Positive Crankcase Ventilation Valve Check
          • <2.4L Engine>
          • <3.8L Engine>
      • Evaporative Emission Control System
        • General Description (Evaporative Emission System)
          • Notes
          • System Diagram
            • <2.4L Engine>
            • <3.8L Engine>
        • Component Location
        • Purge Control System Check (Purge Flow Check)
        • Evaporative Emission Purge Solenoid Check
        • Mass Airflow Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
        • Barometric Pressure Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
        • Engine Coolant Temperature Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
        • Intake Air Temperature Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
        • Fuel Tank Differential Pressure Sensor Check
        • Evaporative Emission Ventilation Solenoid Check
      • Exhaust Gas RECIRCULATION (EGR) System
        • General Description (Exhaust Gas RECIRCULATION System)
          • Notes
          • Operation
          • System Diagram
            • <2.4L Engine>
            • <3.8L Engine>
        • Component Location
        • EGR Valve (Stepper Motor) Check
          • Notes
          • Checking the Operation Sound
          • Checking the Coil Resistance
          • Operation Check
        • Mass Airflow Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
        • Engine Coolant Temperature Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
        • Crankshaft Position Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
        • Removal And Installation <2.4L Engine>
          • Notes
          • Installation Service Point
            • >>A<< EGR Valve Gasket Installation
        • Removal And Installation <3.8L Engine>
          • Notes
          • Installation Service Point
            • >>A<< EGR Valve Gasket Installation
      • Evaporative Emission Canister And Fuel Tank Pressure Relief Valve
        • Removal And Installation
        • Inspection
          • Evaporative Emission Ventilation Solenoid Check
      • Specifications
        • Fastener Tightening Specifications
        • Service Specifications
    • Engine & Emissions Specifications
      • Fastener Tightening Specifications
      • Service Specifications
    • MULTIPORT Fuel Injection (MFI) - 2.4L - Diagnostic Trouble Code Procedures - DTC P001A Through DTC P0128
      • Diagnostic Trouble Code Procedures
        • DTC P001A: Camshaft Profile Control (engine oil control valve) Circuit
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0031: Cylinder 1, 4 Heated Oxygen Sensor Heater (front) Control Circuit Low
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0032: Cylinder 1, 4 Heated Oxygen Sensor Heater (front) Control Circuit High
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0037: Cylinder 1, 4 Heated Oxygen Sensor Heater (rear) Control Circuit Low
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0038: Cylinder 1, 4 Heated Oxygen Sensor Heater (rear) Control Circuit High
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P003C: Mitsubishi Innovative Valve Timing Electronic Control System (MIVEC) Performance Problem
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criteria
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0051: Cylinder 2, 3 Heated Oxygen Sensor Heater (front) Control Circuit Low
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0052: Cylinder 2, 3 Heated Oxygen Sensor Heater (front) Control Circuit High
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0053: Cylinder 1, 4 Heated Oxygen Sensor Heater (front) Resistance
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0057: Cylinder 2, 3 Heated Oxygen Sensor Heater (rear) Control Circuit Low
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0058: Cylinder 2, 3 Heated Oxygen Sensor Heater (rear) Control Circuit High
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0059: Cylinder 2, 3 Heated Oxygen Sensor Heater (front) Resistance
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0069: Abnormal Correlation Between Manifold Absolute Pressure Sensor And Barometric Pressure Sensor
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0101: Mass Airflow Circuit Range/Performance Problem
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC SET CONDITIONS
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • DTC SET CONDITIONS
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0102: Mass Airflow Circuit Low Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0103: Mass Airflow Circuit High Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0106: Manifold Absolute Pressure Circuit Range/Performance Problem
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC SET CONDITIONS
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • DTC SET CONDITIONS
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0107: Manifold Absolute Pressure Circuit Low Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0108: Manifold Absolute Pressure Circuit High Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0111: Intake Air Temperature Circuit Range/Performance Problem
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0112: Intake Air Temperature Circuit Low Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0113: Intake Air Temperature Circuit High Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0116: Engine Coolant Temperature Circuit Range/Performance Problem
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criteria
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0117: Engine Coolant Temperature Circuit Low Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0118: Engine Coolant Temperature Circuit High Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0122: Throttle Position Sensor (main) Circuit Low Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0123: Throttle Position Sensor (main) Circuit High Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0125: Insufficient Coolant Temperature for Closed Loop Fuel Control
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC SET CONDITIONS
            • Logic Flow Chart
            • Check Conditions, Judgement Criteria
          • DTC SET CONDITIONS
            • Logic Flow Chart
            • Check Conditions, Judgement Criteria
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0128: Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
    • MULTIPORT Fuel Injection (MFI) - 2.4L - Diagnostic Trouble Code Procedures - DTC P0131 Through DTC P0304
      • DTC P0131: Cylinder 1, 4 Heated Oxygen Sensor (front) Circuit Low Voltage
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0132: Cylinder 1, 4 Heated Oxygen Sensor (front) Circuit High Voltage
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Condition
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0133: Cylinder 1, 4 Heated Oxygen Sensor (front) Circuit Slow Response
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0134: Cylinder 1, 4 Heated Oxygen Sensor (front) No Activity Detected
        • Notes
        • Cylinder 1, 4 Heated Oxygen Sensor (front) No Activity Detected Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0137: Cylinder 1, 4 Heated Oxygen Sensor (rear) Circuit Low Voltage
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0138: Cylinder 1, 4 Heated Oxygen Sensor (rear) Circuit High Voltage
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0139: Cylinder 1, 4 Heated Oxygen Sensor (rear) Circuit Slow Response
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0140: Cylinder 1, 4 Heated Oxygen Sensor (rear) Circuit No Activity Detected
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0151: Cylinder 2, 3 Heated Oxygen Sensor (front) Circuit Low Voltage
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0152: Cylinder 2, 3 Heated Oxygen Sensor (front) Circuit High Voltage
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0153: Cylinder 2, 3 Heated Oxygen Sensor (front) Circuit Slow Response
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0154: Cylinder 2, 3 Heated Oxygen Sensor (front) No Activity Detected
        • Notes
        • Cylinder 2, 3 Heated Oxygen Sensor (front) No Activity Detected Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0157: Cylinder 2, 3 Heated Oxygen Sensor (rear) Circuit Low Voltage
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0158: Cylinder 2, 3 Heated Oxygen Sensor (rear) Circuit High Voltage
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0159: Cylinder 2, 3 Heated Oxygen Sensor (rear) Circuit Slow Response
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0160: Cylinder 2, 3 Heated Oxygen Sensor (rear) Circuit No Activity Detected
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0171: System too Lean (cylinder 1, 4)
        • Notes
        • Fuel Trim Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0172: System too Rich (cylinder 1, 4)
        • Notes
        • Fuel Trim Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
        • Check Conditions
          • Notes
          • Judgement Criteria
          • Check Conditions
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0174: System too Lean (cylinder 2, 3)
        • Notes
        • Fuel Trim Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0175: System too Rich (cylinder 2, 3)
        • Notes
        • Fuel Trim Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0181: Fuel Tank Temperature Sensor Circuit Range/Performance
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0182: Fuel Tank Temperature Sensor Circuit Low Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0183: Fuel Tank Temperature Sensor Circuit High Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0201: Injector Circuit-Cylinder 1
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0202: Injector Circuit-Cylinder 2
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0203: Injector Circuit-Cylinder 3
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0204: Injector Circuit-Cylinder 4
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0222: Throttle Position Sensor (sub) Circuit Low Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0223: Throttle Position Sensor (sub) Circuit High Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0300: Random/Multiple Cylinder Misfire Detected
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion (change in the angular acceleration of the crankshaft is used for misfire detection)
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0301: Cylinder 1 Misfire Detected
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion (change in the angular acceleration of the crankshaft is used for misfire detection)
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0302: Cylinder 2 Misfire Detected
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion (change in the angular acceleration of the crankshaft is used for misfire detection)
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0303: Cylinder 3 Misfire Detected
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion (change in the angular acceleration of the crankshaft is used for misfire detection)
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0304: Cylinder 4 Misfire Detected
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion (change in the angular acceleration of the crankshaft is used for misfire detection)
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
    • MULTIPORT Fuel Injection (MFI) - 2.4L - Diagnostic Trouble Code Procedures - DTC P0325 Through DTC P0630
      • DTC P0325: Knock Sensor Circuit
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0335: Crankshaft Position Sensor Circuit
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0340: Camshaft Position Sensor Circuit
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0401: Exhaust Gas Recirculation Flow Insufficient Detected
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0403: Exhaust Gas Recirculation Control Circuit
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0421: Warm Up Catalyst Efficiency Below Threshold (cylinder 1, 4)
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0431: Warm Up Catalyst Efficiency Below Threshold (cylinder 2, 3)
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0441: Evaporative Emission Control System Incorrect Purge Flow
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0442: Evaporative Emission Control System Leak Detected (Small Leak)
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • Monitor Execution Conditions (Other Monitor And Sensor)
        • LOGIC FLOW CHARTS (Monitor Sequence)
        • DTC Set Conditions
          • Notes
          • Check Conditions A: At Start up
          • Check Conditions B: For Test to Run
          • Check Conditions C: For Test to Stop
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
        • Diagnosis
      • DTC P0443: Evaporative Emission Control System Purge Control Valve Circuit
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0446: Evaporative Emission Control System Vent Control Circuit
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0450: Evaporative Emission Control System Pressure Sensor malfunction
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • Monitor Execution Conditions (Other Monitor And Sensor)
        • LOGIC FLOW CHARTS (Monitor Sequence)
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
        • Overview Of Troubleshooting
        • Diagnosis
      • DTC P0451: Evaporative Emission Control System Pressure Sensor Range/Performance
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • Monitor Execution Conditions (Other Monitor And Sensor)
        • LOGIC FLOW CHARTS (Monitor Sequence)
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
        • Overview Of Troubleshooting
        • Diagnosis
      • DTC P0452: Evaporative Emission Control System Pressure Sensor Low Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • Monitor Execution Conditions (Other Monitor And Sensor)
        • LOGIC FLOW CHARTS (Monitor Sequence)
        • DTC Set Conditions
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
        • Overview Of Troubleshooting
        • Diagnosis
      • DTC P0453: Evaporative Emission Control System Pressure Sensor High Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • Monitor Execution Conditions (Other Monitor And Sensor)
        • LOGIC FLOW CHARTS (Monitor Sequence)
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
        • Overview Of Troubleshooting
        • Diagnosis
      • DTC P0455: Evaporative Emission Control System Leak Detected (Gross Leak)
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • Monitor Execution Conditions (Other Monitor And Sensor)
        • LOGIC FLOW CHARTS (Monitor Sequence)
        • DTC Set Conditions
          • Check Conditions A: At Start up
          • Check Conditions B: For Test to Run
          • Check Conditions C: For Test to Stop
          • Judgment Criterion
        • OBD-II Drive Cycle Pattern
        • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
        • Diagnosis
      • DTC P0456: Evaporative Emission Control System Leak Detected (Very Small Leak)
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • Monitor Execution Conditions (Other Monitor And Sensor)
        • LOGIC FLOW CHARTS (Monitor Sequence)
        • DTC Set Conditions
          • Check Conditions A: At Start up
          • Check Conditions B: For Test to Run
          • Check Conditions C: For Test to Stop
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
        • Diagnosis
      • DTC P0461: Fuel Level Sensor (main) Circuit Range/Performance
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
            • Notes
            • Check Condition, Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0462: Fuel Level Sensor Circuit Low Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0463: Fuel Level Sensor Circuit High Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0500: Vehicle Speed Sensor Malfunction
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC SET CONDITIONS (Entry Conditions and Malfunction Thresholds)
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0506: Idle Control System RPM Lower Than Expected
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0507: Idle Control System RPM Higher Than Expected
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P050B: Ignition Timing Retard Insufficient
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0513: Immobilizer Malfunction
        • Technical Description
        • DTC Set Conditions
          • Check Condition
          • Judgement Criterion
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0551: Power Steering Pressure Switch Circuit Range/Performance
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0554: Power Steering Pressure Switch Circuit Intermittent
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0603: EEPROM Malfunction
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0606: Engine Control Module or Powertrain Control Module Main Processor Malfunction
        • Notes
        • Powertrain Control Module Main Processor Malfunction
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0622: Generator FR Terminal Circuit Malfunction
        • Notes
        • Circuit Operation
        • Technical Description
        • DTC Set Conditions
          • Check Condition
          • Judgement Criterion
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set area:)
        • Diagnosis
      • DTC P0630: Vehicle Identification Number (VIN) Malfunction
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
    • MULTIPORT Fuel Injection (MFI) - 2.4L - Diagnostic Trouble Code Procedures - DTC P0638 Through DTC U1117
      • DTC P0638: Throttle Actuator Control Motor Circuit Range/Performance Problem
        • Notes
        • Throttle Actuator Control Motor Circuit Range/Performance Problem Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0642: Throttle Position Sensor Power Supply
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0657: Throttle Actuator Control Motor Relay Circuit Malfunction
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P1506: Idle Control System RPM Lower Than Expected at Low Temperature
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P1507: Idle Control System RPM Higher Than Expected at Low Temperature
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P1513: Remote Control Engine Starter System <Vehicle With Remote Control Engine Starter>
      • DTC P1602: Communication Malfunction (between ECM or PCM Main Processor and System LSI)
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P1603: Battery Backup Line Malfunction
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P1751: A/T Control Relay Malfunction <A/T>
      • DTC P2066: Fuel Level Sensor (sub) Circuit Range/Performance
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition, Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2100: Throttle Actuator Control Motor Circuit (open)
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Check Condition
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2101: Throttle Actuator Control Motor Magneto Malfunction
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2122: Accelerator Pedal Position Sensor (main) Circuit Low Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2123: Accelerator Pedal Position Sensor (main) Circuit High Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2127: Accelerator Pedal Position Sensor (sub) Circuit Low Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2128: Accelerator Pedal Position Sensor (sub) Circuit High Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2135: Throttle Position Sensor (main and sub) Range/Performance Problem
        • Notes
        • Throttle Position Sensor (Main And Sub) Range/Performance Problem Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • Logic Flow Chart
          • Notes
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2138: Accelerator Pedal Position Sensor (main and sub) Circuit Range/Performance Problem
        • Notes
        • Accelerator Pedal Position Sensor (Main And Sub) Range/Performance Problem Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2195: Cylinder 1, 4 Heated Oxygen Sensor (front) Inactive
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2197: Cylinder 2, 3 Heated Oxygen Sensor (front) Inactive
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2228: Barometric Pressure Circuit Low Input
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2229: Barometric Pressure Circuit High Input
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2252: Heated Oxygen Sensor Offset Circuit Low Voltage
        • Notes
        • Heated Oxygen Sensor Offset Circuit Low Voltage Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Condition
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2253: Heated Oxygen Sensor Offset Circuit High Voltage
        • Notes
        • Heated Oxygen Sensor Offset Circuit Low Voltage Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Condition
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC U1073: Bus Off
        • Notes
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criteria
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC U1102: Abs/TCL-Ecu Or TCL/ASC-Ecu Time-Out
        • Notes
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criterion
        • Comment
          • Current Trouble
          • Past Trouble
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC U1108: Combination Meter Time-Out
        • Notes
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • Comment
          • Current Trouble
          • Past Trouble
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC U1109: ETACS-Ecu Time-Out
        • Notes
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criterion
        • Comment
          • Current Trouble
          • Past Trouble
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC U1110: A/C-Ecu Time-Out
        • Notes
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criterion
        • Comment
          • Current Trouble
          • Past Trouble
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC U1117: Immobilizer-Ecu Time-Out
        • Notes
        • DTC Set Conditions
          • Check Condition
          • Judgement Criterion
        • Comment
          • Current Trouble
          • Past Trouble
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
    • MULTIPORT Fuel Injection (MFI) - 2.4L - General Description, Introduction, Diagnostic Trouble Code & Symptom Charts
      • General Description
        • Notes
        • Fuel Injection Control
        • Throttle Valve Opening Control
        • Idle Air Control
        • Ignition Timing Control
        • Diagnostic Test Mode
        • Other Control Functions
          • Fuel Pump Control
          • A/C Compressor Clutch Relay Control
          • Engine Oil Control Valve Control
          • Fan Relay Control
          • Generator Output Current Control
          • Evaporative Emission Purge Control
          • EGR Control
        • MULTIPORT Fuel Injection (MFI) System Diagram
      • MULTIPORT Fuel Injection (MFI) Diagnosis
        • Troubleshooting Strategy
        • Diagnostic Function
          • Notes
          • Malfunction Indicator Lamp (Service Engine Soon Or Check Engine Lamp)
          • How To Connect The Scan Tool (M.U.T.-III)
          • How To Read And Erase Diagnostic Trouble Codes
          • How To Read Data List
          • How To Perform Actuator Test
          • How To Diagnose The Can Bus Lines
          • How To Read Provisional Diagnostic Trouble Codes
          • Confirmation Method
          • Mode 6 Reference Table
          • Diagnostic By Diagnostic Test Mode II (Increased Sensitivity)
          • On-Board Diagnostics
          • OBD-II Drive Cycle
            • Notes
            • Drive Cycle Pattern List
              • Notes
              • Pattern 1
              • Pattern 2
              • Pattern 3
              • Pattern 4
              • Pattern 5
              • Pattern 6
              • Pattern 7
              • Pattern 8
              • Pattern 9
              • Pattern 10
              • Pattern 11
              • Pattern 12
              • Pattern 13
              • Pattern 14
              • Pattern 15
              • Pattern 16
              • Pattern 17
              • Pattern 18
              • Pattern 19
              • Pattern 20
              • Pattern 21
              • Pattern 22
              • Pattern 23
          • System Readiness Test Status
            • Purpose
            • Overview
        • Fail-Safe Function Reference Table
        • Diagnostic Trouble Code Chart
        • Symptom Chart
          • Notes
          • Problem Symptoms Table (For Your Information)
    • MULTIPORT Fuel Injection (MFI) - 2.4L - Reference Tables, Ecu Check, Special Tools, On-Vehicle Service, R & I, Specifications
      • Data List Reference Table
      • General Scan Tool (GST) Mode 01 Reference Table
      • Actuator Test Reference Table
      • Check At The Engine Control Module (Ecu) Or The Powertrain Control Module (Pcm)
        • Notes
        • Terminal Voltage Check Chart
      • Terminal Resistance And Continuity Check
      • Inspection Procedure Using An Oscilloscope
        • Camshaft Position Sensor And Crankshaft Position Sensor
          • Notes
          • Measurement Method
          • Alternate method
            • Notes
            • Wave Pattern Observation Points
          • Examples of Abnormal Wave Patterns
            • Example 1
            • Example 2
        • Injector
          • Notes
          • Measurement Method
            • Overview
            • Notes
            • Alternate method
            • Wave Pattern Observation Points
          • EGR Valve (Stepper Motor)
          • Alternate method
            • Notes
            • Wave Pattern Observation Points
          • Examples of Abnormal Wave Patterns
            • Example 1
            • Example 2
        • Ignition Coil And Ignition Power Transistor
          • Notes
          • Measurement Method
          • Alternate method
            • Notes
            • Wave Pattern Observation Points
          • Examples of Abnormal Wave Patterns
            • Example 1 (Wave pattern during engine cranking)
      • Special Tools
      • On-Vehicle Service
        • Component Location
        • Throttle Body (Throttle Valve Area) Cleaning
        • Fuel Pressure Test
        • Reduce Pressurized Fuel Lines
        • Fuel Pump Operation Check
        • MULTIPORT Fuel Injection (MFI) Relay And Throttle Actuator Control Motor Relay Continuity Check
        • Fuel Pump Relay Continuity Check
        • Intake Air Temperature Sensor Check
        • Engine Coolant Temperature Sensor Check
        • Heated Oxygen Sensor Check
          • Notes
          • <Heated oxygen sensor (rear)>
          • <Heated oxygen sensor (front)>
        • Injector Check
          • Measurement of Resistance between Terminals
          • Checking operation sound
        • Throttle Actuator Control Motor Check
          • <Operation Inspection>
          • <Checking the Terminal Resistance>
        • Engine Oil Control Valve Check
          • Notes
          • Checking the Operation Sound
          • Checking the Coil Resistance
        • Evaporative Emission Purge Solenoid Check
        • Evaporative Emission Ventilation Solenoid Check
        • EGR Valve Check
      • Injector
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Fuel High-Pressure Hose Disconnection
            • <<B>> Fuel Rail And Fuel Injector Assembly Removal
          • Installation Service Points
            • >>A<< Fuel Injector Assembly Installation
            • >>B<< Fuel High-Pressure Hose Connection
      • Throttle Body Assembly
        • Removal And Installation
          • Notes
          • Installation Service Points
            • >>A<< Throttle Body Gasket Installation
            • >>B<< Initialization Procedure
      • Engine Control Module (ECM) And Powertrain Control Module (Pcm)
        • Removal And Installation
          • Notes
          • <Vehicles For USA>
          • <Vehicles For CANADA>
          • Removal Service Point
            • <<A>> Break-Off Bolts Removal
          • Installation Service Points
            • >>A<< Break-Off Bolts Installation
            • >>B<< Initialization Procedure
      • Specifications
        • Fastener Tightening Specifications
        • General Specifications
        • Service Specifications
        • Sealant And Adhesive
    • MULTIPORT Fuel Injection (MFI) - 2.4L - Symptom Procedures
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: Communication with PCM Only Is Not Possible
          • Notes
          • Circuit Operation
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 2: The Malfunction Indicator Lamp (SERVICE ENGINE SOON or Check Engine Lamp) Does Not Illuminate Right after the Ignition Switch Is Turned to the "ON" Position
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 3: The Malfunction Indicator Lamp (SERVICE ENGINE SOON or Check Engine Lamp) Remains Illuminated and Never Goes Out
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 4: Cranks, Won't Start
          • Cranks, Won't Start Circuit
          • Circuit Operation
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 5: Starts Up and Dies
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 6: Hard Starting
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 7: Unstable Idle (rough idle, hunting)
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 8: Idle speed is high (improper idle speed)
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 9: Idle Speed Is Low (Improper Idle Speed)
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 10: When the engine is cold, it stalls at idle (die out)
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 11: When the Engine Is Hot, It Stalls at Idle (die out)
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 12: The Engine Stalls when Accelerating (Pass Out)
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 13: The engine stalls when decelerating
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 14: Hesitation, sag or stumble
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 15: Acceleration shock
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 16: Deceleration Shock
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 17: Poor acceleration
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 18: Surge
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 19: Knocking
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 20: Dieseling (Run-on)
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 21: Too high CO and HC concentration when idling
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 22: Transient, Mass Emission Tailpipe Test Failure
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 23: Purge Flow Test of the Evaporative Emission Canister Failure
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 24: Pressure Test of the Evaporative System Failure
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 25: Generator output voltage is low (approximately 12.3 volts)
          • Notes
          • Circuit Operation
          • TROUBLESHOOTING HINTS (The most likely causes for this charging system:)
          • Diagnosis
        • INSPECTION PROCEDURE 26: Fans (radiator fan, A/C condenser fan) are inoperative
          • Notes
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • INSPECTION PROCEDURE 27: Power supply system and ignition switch-IG system
          • Notes
          • Circuit Operation
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • INSPECTION PROCEDURE 28: Fuel pump system
          • Notes
          • Circuit Operation
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • INSPECTION PROCEDURE 29: Ignition Switch-ST System
          • Notes
          • Circuit Operation
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 30: Ignition Switch-ST System and Transmission Range Switch System
          • Notes
          • Comment
          • TROUBLESHOOTING HINTS (The most likely caused for this code to be set are:)
          • Diagnosis
        • INSPECTION PROCEDURE 31: Ignition Circuit System
          • Notes
          • Circuit Operation
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 32: A/C system
          • Notes
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
  • Testing & Diagnosis
    • Ambient Air Temperature Sensor
      • Ambient Air Temperature Sensor
        • Removal And Installation
        • Inspection
    • Emission Control System
      • General Description
      • Diagnosis
      • Special Tools
      • Vacuum Hoses
        • Vacuum Hose Routing
          • <2.4L Engine>
          • <3.8L Engine>
        • Vacuum Circuit Diagram
          • <2.4L Engine>
          • <3.8L Engine>
        • Vacuum Hose Installation
        • Vacuum Hose Check
      • Positive Crankcase Ventilation System
        • General Description (Positive Crankcase Ventilation System)
          • Notes
          • System Diagram
            • <2.4L Engine>
            • <3.8L Engine>
        • Component Location
        • Positive Crankcase Ventilation System Check
        • Positive Crankcase Ventilation Valve Check
          • <2.4L Engine>
          • <3.8L Engine>
      • Evaporative Emission Control System
        • General Description (Evaporative Emission System)
          • Notes
          • System Diagram
            • <2.4L Engine>
            • <3.8L Engine>
        • Component Location
        • Purge Control System Check (Purge Flow Check)
        • Evaporative Emission Purge Solenoid Check
        • Mass Airflow Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
        • Barometric Pressure Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
        • Engine Coolant Temperature Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
        • Intake Air Temperature Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
        • Fuel Tank Differential Pressure Sensor Check
        • Evaporative Emission Ventilation Solenoid Check
      • Exhaust Gas RECIRCULATION (EGR) System
        • General Description (Exhaust Gas RECIRCULATION System)
          • Notes
          • Operation
          • System Diagram
            • <2.4L Engine>
            • <3.8L Engine>
        • Component Location
        • EGR Valve (Stepper Motor) Check
          • Notes
          • Checking the Operation Sound
          • Checking the Coil Resistance
          • Operation Check
        • Mass Airflow Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
        • Engine Coolant Temperature Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
        • Crankshaft Position Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
        • Removal And Installation <2.4L Engine>
          • Notes
          • Installation Service Point
            • >>A<< EGR Valve Gasket Installation
        • Removal And Installation <3.8L Engine>
          • Notes
          • Installation Service Point
            • >>A<< EGR Valve Gasket Installation
      • Evaporative Emission Canister And Fuel Tank Pressure Relief Valve
        • Removal And Installation
        • Inspection
          • Evaporative Emission Ventilation Solenoid Check
      • Specifications
        • Fastener Tightening Specifications
        • Service Specifications
    • Engine & Emissions Specifications
      • Fastener Tightening Specifications
      • Service Specifications
    • MULTIPORT Fuel Injection (MFI) - 2.4L - Diagnostic Trouble Code Procedures - DTC P001A Through DTC P0128
      • Diagnostic Trouble Code Procedures
        • DTC P001A: Camshaft Profile Control (engine oil control valve) Circuit
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0031: Cylinder 1, 4 Heated Oxygen Sensor Heater (front) Control Circuit Low
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0032: Cylinder 1, 4 Heated Oxygen Sensor Heater (front) Control Circuit High
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0037: Cylinder 1, 4 Heated Oxygen Sensor Heater (rear) Control Circuit Low
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0038: Cylinder 1, 4 Heated Oxygen Sensor Heater (rear) Control Circuit High
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P003C: Mitsubishi Innovative Valve Timing Electronic Control System (MIVEC) Performance Problem
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criteria
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0051: Cylinder 2, 3 Heated Oxygen Sensor Heater (front) Control Circuit Low
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0052: Cylinder 2, 3 Heated Oxygen Sensor Heater (front) Control Circuit High
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0053: Cylinder 1, 4 Heated Oxygen Sensor Heater (front) Resistance
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0057: Cylinder 2, 3 Heated Oxygen Sensor Heater (rear) Control Circuit Low
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0058: Cylinder 2, 3 Heated Oxygen Sensor Heater (rear) Control Circuit High
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0059: Cylinder 2, 3 Heated Oxygen Sensor Heater (front) Resistance
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0069: Abnormal Correlation Between Manifold Absolute Pressure Sensor And Barometric Pressure Sensor
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0101: Mass Airflow Circuit Range/Performance Problem
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC SET CONDITIONS
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • DTC SET CONDITIONS
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0102: Mass Airflow Circuit Low Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0103: Mass Airflow Circuit High Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0106: Manifold Absolute Pressure Circuit Range/Performance Problem
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC SET CONDITIONS
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • DTC SET CONDITIONS
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0107: Manifold Absolute Pressure Circuit Low Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0108: Manifold Absolute Pressure Circuit High Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0111: Intake Air Temperature Circuit Range/Performance Problem
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0112: Intake Air Temperature Circuit Low Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0113: Intake Air Temperature Circuit High Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0116: Engine Coolant Temperature Circuit Range/Performance Problem
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criteria
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0117: Engine Coolant Temperature Circuit Low Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0118: Engine Coolant Temperature Circuit High Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0122: Throttle Position Sensor (main) Circuit Low Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0123: Throttle Position Sensor (main) Circuit High Input
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Condition
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0125: Insufficient Coolant Temperature for Closed Loop Fuel Control
          • Notes
          • Circuit Operation
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
          • DTC SET CONDITIONS
            • Logic Flow Chart
            • Check Conditions, Judgement Criteria
          • DTC SET CONDITIONS
            • Logic Flow Chart
            • Check Conditions, Judgement Criteria
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • DTC P0128: Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)
          • Technical Description
          • Descriptions Of Monitor Methods
          • Monitor Execution
          • DTC Set Conditions
            • Logic Flow Chart
            • Check Conditions
            • Judgement Criterion
          • OBD-II Drive Cycle Pattern
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
    • MULTIPORT Fuel Injection (MFI) - 2.4L - Diagnostic Trouble Code Procedures - DTC P0131 Through DTC P0304
      • DTC P0131: Cylinder 1, 4 Heated Oxygen Sensor (front) Circuit Low Voltage
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0132: Cylinder 1, 4 Heated Oxygen Sensor (front) Circuit High Voltage
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Condition
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0133: Cylinder 1, 4 Heated Oxygen Sensor (front) Circuit Slow Response
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0134: Cylinder 1, 4 Heated Oxygen Sensor (front) No Activity Detected
        • Notes
        • Cylinder 1, 4 Heated Oxygen Sensor (front) No Activity Detected Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0137: Cylinder 1, 4 Heated Oxygen Sensor (rear) Circuit Low Voltage
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0138: Cylinder 1, 4 Heated Oxygen Sensor (rear) Circuit High Voltage
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0139: Cylinder 1, 4 Heated Oxygen Sensor (rear) Circuit Slow Response
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0140: Cylinder 1, 4 Heated Oxygen Sensor (rear) Circuit No Activity Detected
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0151: Cylinder 2, 3 Heated Oxygen Sensor (front) Circuit Low Voltage
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0152: Cylinder 2, 3 Heated Oxygen Sensor (front) Circuit High Voltage
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0153: Cylinder 2, 3 Heated Oxygen Sensor (front) Circuit Slow Response
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0154: Cylinder 2, 3 Heated Oxygen Sensor (front) No Activity Detected
        • Notes
        • Cylinder 2, 3 Heated Oxygen Sensor (front) No Activity Detected Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0157: Cylinder 2, 3 Heated Oxygen Sensor (rear) Circuit Low Voltage
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0158: Cylinder 2, 3 Heated Oxygen Sensor (rear) Circuit High Voltage
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0159: Cylinder 2, 3 Heated Oxygen Sensor (rear) Circuit Slow Response
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0160: Cylinder 2, 3 Heated Oxygen Sensor (rear) Circuit No Activity Detected
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0171: System too Lean (cylinder 1, 4)
        • Notes
        • Fuel Trim Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0172: System too Rich (cylinder 1, 4)
        • Notes
        • Fuel Trim Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
        • Check Conditions
          • Notes
          • Judgement Criteria
          • Check Conditions
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0174: System too Lean (cylinder 2, 3)
        • Notes
        • Fuel Trim Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0175: System too Rich (cylinder 2, 3)
        • Notes
        • Fuel Trim Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0181: Fuel Tank Temperature Sensor Circuit Range/Performance
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0182: Fuel Tank Temperature Sensor Circuit Low Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0183: Fuel Tank Temperature Sensor Circuit High Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0201: Injector Circuit-Cylinder 1
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0202: Injector Circuit-Cylinder 2
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0203: Injector Circuit-Cylinder 3
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0204: Injector Circuit-Cylinder 4
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0222: Throttle Position Sensor (sub) Circuit Low Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0223: Throttle Position Sensor (sub) Circuit High Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0300: Random/Multiple Cylinder Misfire Detected
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion (change in the angular acceleration of the crankshaft is used for misfire detection)
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0301: Cylinder 1 Misfire Detected
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion (change in the angular acceleration of the crankshaft is used for misfire detection)
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0302: Cylinder 2 Misfire Detected
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion (change in the angular acceleration of the crankshaft is used for misfire detection)
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0303: Cylinder 3 Misfire Detected
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion (change in the angular acceleration of the crankshaft is used for misfire detection)
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0304: Cylinder 4 Misfire Detected
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion (change in the angular acceleration of the crankshaft is used for misfire detection)
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
    • MULTIPORT Fuel Injection (MFI) - 2.4L - Diagnostic Trouble Code Procedures - DTC P0325 Through DTC P0630
      • DTC P0325: Knock Sensor Circuit
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0335: Crankshaft Position Sensor Circuit
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0340: Camshaft Position Sensor Circuit
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0401: Exhaust Gas Recirculation Flow Insufficient Detected
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0403: Exhaust Gas Recirculation Control Circuit
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0421: Warm Up Catalyst Efficiency Below Threshold (cylinder 1, 4)
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0431: Warm Up Catalyst Efficiency Below Threshold (cylinder 2, 3)
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0441: Evaporative Emission Control System Incorrect Purge Flow
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0442: Evaporative Emission Control System Leak Detected (Small Leak)
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • Monitor Execution Conditions (Other Monitor And Sensor)
        • LOGIC FLOW CHARTS (Monitor Sequence)
        • DTC Set Conditions
          • Notes
          • Check Conditions A: At Start up
          • Check Conditions B: For Test to Run
          • Check Conditions C: For Test to Stop
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
        • Diagnosis
      • DTC P0443: Evaporative Emission Control System Purge Control Valve Circuit
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0446: Evaporative Emission Control System Vent Control Circuit
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0450: Evaporative Emission Control System Pressure Sensor malfunction
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • Monitor Execution Conditions (Other Monitor And Sensor)
        • LOGIC FLOW CHARTS (Monitor Sequence)
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
        • Overview Of Troubleshooting
        • Diagnosis
      • DTC P0451: Evaporative Emission Control System Pressure Sensor Range/Performance
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • Monitor Execution Conditions (Other Monitor And Sensor)
        • LOGIC FLOW CHARTS (Monitor Sequence)
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
        • Overview Of Troubleshooting
        • Diagnosis
      • DTC P0452: Evaporative Emission Control System Pressure Sensor Low Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • Monitor Execution Conditions (Other Monitor And Sensor)
        • LOGIC FLOW CHARTS (Monitor Sequence)
        • DTC Set Conditions
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
        • Overview Of Troubleshooting
        • Diagnosis
      • DTC P0453: Evaporative Emission Control System Pressure Sensor High Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • Monitor Execution Conditions (Other Monitor And Sensor)
        • LOGIC FLOW CHARTS (Monitor Sequence)
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
        • Overview Of Troubleshooting
        • Diagnosis
      • DTC P0455: Evaporative Emission Control System Leak Detected (Gross Leak)
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • Monitor Execution Conditions (Other Monitor And Sensor)
        • LOGIC FLOW CHARTS (Monitor Sequence)
        • DTC Set Conditions
          • Check Conditions A: At Start up
          • Check Conditions B: For Test to Run
          • Check Conditions C: For Test to Stop
          • Judgment Criterion
        • OBD-II Drive Cycle Pattern
        • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
        • Diagnosis
      • DTC P0456: Evaporative Emission Control System Leak Detected (Very Small Leak)
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • Monitor Execution Conditions (Other Monitor And Sensor)
        • LOGIC FLOW CHARTS (Monitor Sequence)
        • DTC Set Conditions
          • Check Conditions A: At Start up
          • Check Conditions B: For Test to Run
          • Check Conditions C: For Test to Stop
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
        • Diagnosis
      • DTC P0461: Fuel Level Sensor (main) Circuit Range/Performance
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
            • Notes
            • Check Condition, Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0462: Fuel Level Sensor Circuit Low Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0463: Fuel Level Sensor Circuit High Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0500: Vehicle Speed Sensor Malfunction
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC SET CONDITIONS (Entry Conditions and Malfunction Thresholds)
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0506: Idle Control System RPM Lower Than Expected
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0507: Idle Control System RPM Higher Than Expected
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P050B: Ignition Timing Retard Insufficient
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0513: Immobilizer Malfunction
        • Technical Description
        • DTC Set Conditions
          • Check Condition
          • Judgement Criterion
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0551: Power Steering Pressure Switch Circuit Range/Performance
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0554: Power Steering Pressure Switch Circuit Intermittent
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0603: EEPROM Malfunction
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0606: Engine Control Module or Powertrain Control Module Main Processor Malfunction
        • Notes
        • Powertrain Control Module Main Processor Malfunction
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0622: Generator FR Terminal Circuit Malfunction
        • Notes
        • Circuit Operation
        • Technical Description
        • DTC Set Conditions
          • Check Condition
          • Judgement Criterion
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set area:)
        • Diagnosis
      • DTC P0630: Vehicle Identification Number (VIN) Malfunction
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
    • MULTIPORT Fuel Injection (MFI) - 2.4L - Diagnostic Trouble Code Procedures - DTC P0638 Through DTC U1117
      • DTC P0638: Throttle Actuator Control Motor Circuit Range/Performance Problem
        • Notes
        • Throttle Actuator Control Motor Circuit Range/Performance Problem Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0642: Throttle Position Sensor Power Supply
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P0657: Throttle Actuator Control Motor Relay Circuit Malfunction
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P1506: Idle Control System RPM Lower Than Expected at Low Temperature
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P1507: Idle Control System RPM Higher Than Expected at Low Temperature
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P1513: Remote Control Engine Starter System <Vehicle With Remote Control Engine Starter>
      • DTC P1602: Communication Malfunction (between ECM or PCM Main Processor and System LSI)
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P1603: Battery Backup Line Malfunction
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P1751: A/T Control Relay Malfunction <A/T>
      • DTC P2066: Fuel Level Sensor (sub) Circuit Range/Performance
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition, Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2100: Throttle Actuator Control Motor Circuit (open)
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Check Condition
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2101: Throttle Actuator Control Motor Magneto Malfunction
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2122: Accelerator Pedal Position Sensor (main) Circuit Low Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2123: Accelerator Pedal Position Sensor (main) Circuit High Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2127: Accelerator Pedal Position Sensor (sub) Circuit Low Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2128: Accelerator Pedal Position Sensor (sub) Circuit High Input
        • Notes
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2135: Throttle Position Sensor (main and sub) Range/Performance Problem
        • Notes
        • Throttle Position Sensor (Main And Sub) Range/Performance Problem Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC SET CONDITIONS
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • Logic Flow Chart
          • Notes
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2138: Accelerator Pedal Position Sensor (main and sub) Circuit Range/Performance Problem
        • Notes
        • Accelerator Pedal Position Sensor (Main And Sub) Range/Performance Problem Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criteria
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2195: Cylinder 1, 4 Heated Oxygen Sensor (front) Inactive
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2197: Cylinder 2, 3 Heated Oxygen Sensor (front) Inactive
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2228: Barometric Pressure Circuit Low Input
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2229: Barometric Pressure Circuit High Input
        • Notes
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Conditions
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2252: Heated Oxygen Sensor Offset Circuit Low Voltage
        • Notes
        • Heated Oxygen Sensor Offset Circuit Low Voltage Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Condition
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC P2253: Heated Oxygen Sensor Offset Circuit High Voltage
        • Notes
        • Heated Oxygen Sensor Offset Circuit Low Voltage Circuit
        • Circuit Operation
        • Technical Description
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Condition
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC U1073: Bus Off
        • Notes
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criteria
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC U1102: Abs/TCL-Ecu Or TCL/ASC-Ecu Time-Out
        • Notes
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criterion
        • Comment
          • Current Trouble
          • Past Trouble
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC U1108: Combination Meter Time-Out
        • Notes
        • Descriptions Of Monitor Methods
        • Monitor Execution
        • MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
        • DTC Set Conditions
          • Logic Flow Chart
          • Check Condition
          • Judgement Criterion
        • Comment
          • Current Trouble
          • Past Trouble
        • OBD-II Drive Cycle Pattern
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC U1109: ETACS-Ecu Time-Out
        • Notes
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criterion
        • Comment
          • Current Trouble
          • Past Trouble
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC U1110: A/C-Ecu Time-Out
        • Notes
        • DTC Set Conditions
          • Check Conditions
          • Judgement Criterion
        • Comment
          • Current Trouble
          • Past Trouble
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
      • DTC U1117: Immobilizer-Ecu Time-Out
        • Notes
        • DTC Set Conditions
          • Check Condition
          • Judgement Criterion
        • Comment
          • Current Trouble
          • Past Trouble
        • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
        • Diagnosis
    • MULTIPORT Fuel Injection (MFI) - 2.4L - General Description, Introduction, Diagnostic Trouble Code & Symptom Charts
      • General Description
        • Notes
        • Fuel Injection Control
        • Throttle Valve Opening Control
        • Idle Air Control
        • Ignition Timing Control
        • Diagnostic Test Mode
        • Other Control Functions
          • Fuel Pump Control
          • A/C Compressor Clutch Relay Control
          • Engine Oil Control Valve Control
          • Fan Relay Control
          • Generator Output Current Control
          • Evaporative Emission Purge Control
          • EGR Control
        • MULTIPORT Fuel Injection (MFI) System Diagram
      • MULTIPORT Fuel Injection (MFI) Diagnosis
        • Troubleshooting Strategy
        • Diagnostic Function
          • Notes
          • Malfunction Indicator Lamp (Service Engine Soon Or Check Engine Lamp)
          • How To Connect The Scan Tool (M.U.T.-III)
          • How To Read And Erase Diagnostic Trouble Codes
          • How To Read Data List
          • How To Perform Actuator Test
          • How To Diagnose The Can Bus Lines
          • How To Read Provisional Diagnostic Trouble Codes
          • Confirmation Method
          • Mode 6 Reference Table
          • Diagnostic By Diagnostic Test Mode II (Increased Sensitivity)
          • On-Board Diagnostics
          • OBD-II Drive Cycle
            • Notes
            • Drive Cycle Pattern List
              • Notes
              • Pattern 1
              • Pattern 2
              • Pattern 3
              • Pattern 4
              • Pattern 5
              • Pattern 6
              • Pattern 7
              • Pattern 8
              • Pattern 9
              • Pattern 10
              • Pattern 11
              • Pattern 12
              • Pattern 13
              • Pattern 14
              • Pattern 15
              • Pattern 16
              • Pattern 17
              • Pattern 18
              • Pattern 19
              • Pattern 20
              • Pattern 21
              • Pattern 22
              • Pattern 23
          • System Readiness Test Status
            • Purpose
            • Overview
        • Fail-Safe Function Reference Table
        • Diagnostic Trouble Code Chart
        • Symptom Chart
          • Notes
          • Problem Symptoms Table (For Your Information)
    • MULTIPORT Fuel Injection (MFI) - 2.4L - Reference Tables, Ecu Check, Special Tools, On-Vehicle Service, R & I, Specifications
      • Data List Reference Table
      • General Scan Tool (GST) Mode 01 Reference Table
      • Actuator Test Reference Table
      • Check At The Engine Control Module (Ecu) Or The Powertrain Control Module (Pcm)
        • Notes
        • Terminal Voltage Check Chart
      • Terminal Resistance And Continuity Check
      • Inspection Procedure Using An Oscilloscope
        • Camshaft Position Sensor And Crankshaft Position Sensor
          • Notes
          • Measurement Method
          • Alternate method
            • Notes
            • Wave Pattern Observation Points
          • Examples of Abnormal Wave Patterns
            • Example 1
            • Example 2
        • Injector
          • Notes
          • Measurement Method
            • Overview
            • Notes
            • Alternate method
            • Wave Pattern Observation Points
          • EGR Valve (Stepper Motor)
          • Alternate method
            • Notes
            • Wave Pattern Observation Points
          • Examples of Abnormal Wave Patterns
            • Example 1
            • Example 2
        • Ignition Coil And Ignition Power Transistor
          • Notes
          • Measurement Method
          • Alternate method
            • Notes
            • Wave Pattern Observation Points
          • Examples of Abnormal Wave Patterns
            • Example 1 (Wave pattern during engine cranking)
      • Special Tools
      • On-Vehicle Service
        • Component Location
        • Throttle Body (Throttle Valve Area) Cleaning
        • Fuel Pressure Test
        • Reduce Pressurized Fuel Lines
        • Fuel Pump Operation Check
        • MULTIPORT Fuel Injection (MFI) Relay And Throttle Actuator Control Motor Relay Continuity Check
        • Fuel Pump Relay Continuity Check
        • Intake Air Temperature Sensor Check
        • Engine Coolant Temperature Sensor Check
        • Heated Oxygen Sensor Check
          • Notes
          • <Heated oxygen sensor (rear)>
          • <Heated oxygen sensor (front)>
        • Injector Check
          • Measurement of Resistance between Terminals
          • Checking operation sound
        • Throttle Actuator Control Motor Check
          • <Operation Inspection>
          • <Checking the Terminal Resistance>
        • Engine Oil Control Valve Check
          • Notes
          • Checking the Operation Sound
          • Checking the Coil Resistance
        • Evaporative Emission Purge Solenoid Check
        • Evaporative Emission Ventilation Solenoid Check
        • EGR Valve Check
      • Injector
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Fuel High-Pressure Hose Disconnection
            • <<B>> Fuel Rail And Fuel Injector Assembly Removal
          • Installation Service Points
            • >>A<< Fuel Injector Assembly Installation
            • >>B<< Fuel High-Pressure Hose Connection
      • Throttle Body Assembly
        • Removal And Installation
          • Notes
          • Installation Service Points
            • >>A<< Throttle Body Gasket Installation
            • >>B<< Initialization Procedure
      • Engine Control Module (ECM) And Powertrain Control Module (Pcm)
        • Removal And Installation
          • Notes
          • <Vehicles For USA>
          • <Vehicles For CANADA>
          • Removal Service Point
            • <<A>> Break-Off Bolts Removal
          • Installation Service Points
            • >>A<< Break-Off Bolts Installation
            • >>B<< Initialization Procedure
      • Specifications
        • Fastener Tightening Specifications
        • General Specifications
        • Service Specifications
        • Sealant And Adhesive
    • MULTIPORT Fuel Injection (MFI) - 2.4L - Symptom Procedures
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: Communication with PCM Only Is Not Possible
          • Notes
          • Circuit Operation
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 2: The Malfunction Indicator Lamp (SERVICE ENGINE SOON or Check Engine Lamp) Does Not Illuminate Right after the Ignition Switch Is Turned to the "ON" Position
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 3: The Malfunction Indicator Lamp (SERVICE ENGINE SOON or Check Engine Lamp) Remains Illuminated and Never Goes Out
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 4: Cranks, Won't Start
          • Cranks, Won't Start Circuit
          • Circuit Operation
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 5: Starts Up and Dies
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 6: Hard Starting
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 7: Unstable Idle (rough idle, hunting)
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 8: Idle speed is high (improper idle speed)
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 9: Idle Speed Is Low (Improper Idle Speed)
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 10: When the engine is cold, it stalls at idle (die out)
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 11: When the Engine Is Hot, It Stalls at Idle (die out)
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 12: The Engine Stalls when Accelerating (Pass Out)
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 13: The engine stalls when decelerating
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 14: Hesitation, sag or stumble
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 15: Acceleration shock
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 16: Deceleration Shock
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 17: Poor acceleration
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 18: Surge
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 19: Knocking
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 20: Dieseling (Run-on)
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 21: Too high CO and HC concentration when idling
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 22: Transient, Mass Emission Tailpipe Test Failure
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 23: Purge Flow Test of the Evaporative Emission Canister Failure
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 24: Pressure Test of the Evaporative System Failure
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 25: Generator output voltage is low (approximately 12.3 volts)
          • Notes
          • Circuit Operation
          • TROUBLESHOOTING HINTS (The most likely causes for this charging system:)
          • Diagnosis
        • INSPECTION PROCEDURE 26: Fans (radiator fan, A/C condenser fan) are inoperative
          • Notes
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • INSPECTION PROCEDURE 27: Power supply system and ignition switch-IG system
          • Notes
          • Circuit Operation
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • INSPECTION PROCEDURE 28: Fuel pump system
          • Notes
          • Circuit Operation
          • TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
          • Diagnosis
        • INSPECTION PROCEDURE 29: Ignition Switch-ST System
          • Notes
          • Circuit Operation
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 30: Ignition Switch-ST System and Transmission Range Switch System
          • Notes
          • Comment
          • TROUBLESHOOTING HINTS (The most likely caused for this code to be set are:)
          • Diagnosis
        • INSPECTION PROCEDURE 31: Ignition Circuit System
          • Notes
          • Circuit Operation
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
        • INSPECTION PROCEDURE 32: A/C system
          • Notes
          • Comment
          • TROUBLESHOOTING HINTS (The most likely causes for this case:)
          • Diagnosis
  • Tune-Up
    • Ignition System
      • General Description
        • <2.4L Engine>
        • <3.8L Engine>
      • Special Tool
      • On-Vehicle Service
        • Knock Control System Check
          • Notes
          • <2.4L Engine>
          • <3.8L Engine>
        • Ignition Coil Check
          • Notes
          • Primary Coil And Ignition Power Transistor Continuity Check
          • Secondary Coil Check
        • Spark Plug Test
        • Spark Plug Check And Cleaning
          • Notes
          • Spark Plug Gap Check
            • <2.4L Engine>
            • <3.8L Engine>
          • Spark Plug Insulation Resistance Check
          • Spark Plug Cleaning
            • Notes
            • <When a sand blast type plug cleaner is used>
            • <When special tool MB992273 is used>
        • Camshaft Position Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
        • Crankshaft Position Sensor Check
          • <2.4L Engine>
          • <3.8L Engine>
      • Ignition Coil
        • Removal And Installation <2.4L Engine>
        • Removal And Installation <3.8L Engine>
      • Camshaft Position Sensor
        • Removal And Installation <2.4L Engine>
        • Removal And Installation <3.8L Engine>
      • Crankshaft Position Sensor
        • Removal And Installation <2.4L Engine>
        • Removal And Installation <3.8L Engine>
          • Notes
          • Installation Service Points
            • >>A<< Crankshaft Position Sensor Installation
            • >>B<< Clip Installation
      • Knock Sensor
        • Removal And Installation <2.4L Engine>
          • Notes
          • Removal Service Point
            • <<A>> Knock Sensor Removal
          • Installation Service Point
            • >>A<< Knock Sensor Installation
        • Removal And Installation <3.8L Engine>
          • Notes
          • Removal Service Point
            • <<A>> Knock Sensor Removal
          • Installation Service Points
            • >>A<< Knock Sensor Installation
            • >>B<< Clip Installation
    • Specifications [Engine Electrical]
      • Fastener Tightening Specifications
        • <2.4L Engine>
        • <3.8L Engine>
      • General Specifications
        • <2.4L Engine>
        • <3.8L Engine>
      • Service Specifications
• General Information
  • Abbreviations
    • Commonly Used Abbreviations - General Information
      • * Please Read This First *
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "J"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "Q"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
    • Emission Control Abbreviations
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
  • Basic Trouble Shooting
    • Basic Trouble Shooting - General Information
      • * Please Read This First *
      • Accessories & Electrical
        • Charging System Trouble Shooting
        • Ignition System Trouble Shooting
        • Starter Trouble Shooting
      • Air Conditioning & Heat
        • Air Conditioning Trouble Shooting
        • Heater System Trouble Shooting
      • Brakes
        • Brake System Trouble Shooting
      • Engine Mechanical
        • Cooling System Trouble Shooting
        • Gasoline Engine - Mechanical Trouble Shooting
      • Engine Performance
        • Carburetor Trouble Shooting:
        • Diesel Engine Trouble Shooting
        • Fuel Injection Trouble Shooting
        • Ignition System Trouble Shooting
        • Starter Trouble Shooting
        • Tune-Up Trouble Shooting - Gas Engine Vehicles
        • Vacuum Pump - Diesel Trouble Shooting
      • Manual Transmission
        • Manual Transmission Trouble Shooting
      • Powertrain
        • Clutch Trouble Shooting
        • Drive Axle - Noise Diagnosis
          • Unrelated Noises
          • Non-Drive Axle Noises
          • Gear Noise
          • Chuckle
          • Knock
          • Clunk
          • Bearing Whine
          • Bearing Rumble
          • Chatter On Turns
          • Axle Shaft Noise
          • Vibration
        • Drive Axle - RWD Trouble Shooting
        • Fwd Axle Shafts & CV Joints Trouble Shooting
      • Steering & Suspension
        • Manual Steering Gear Trouble Shooting
        • Power Steering Trouble Shooting
        • Steering Column Trouble Shooting
        • Suspension Trouble Shooting
        • Wheel Alignment Trouble Shooting
    • Commonly Used Abbreviations - General Information
      • * Please Read This First *
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "J"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "Q"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
    • Emission Control Abbreviations
      • "A"
      • "B"
      • "C"
      • "D"
      • "E"
      • "F"
      • "G"
      • "H"
      • "I"
      • "K"
      • "L"
      • "M"
      • "N"
      • "O"
      • "P"
      • "R"
      • "S"
      • "T"
      • "V"
      • "W"
    • Engine Performance - Trouble Shooting - General Information
      • * Please Read This First *
      • Engine Performance
  • Brakes
    • Anti-Lock Brake Safety Precautions - General Information
      • * Please Read This First *
      • Anti-Lock Brake Safety Precautions
    • Map - Brake Systems
      • Brake Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
        • Accelerometers
        • Accumulators
        • Anchor Pins
        • Anti-Lock Brake Control Assembly(Module)
        • Anti-Lock Brake Controller
        • Anti-Lock Brake Systems
        • Axle Seal
        • Backing Plates
        • Bleeder Screw
        • Brake Abs Active Light (Blue)
        • Brake Fluid
        • Brake Friction Material
        • Brake On - Off Switch
        • Brake Pads
        • Brake Pedals
        • Brake Shoe Hardware
        • Brake Shoes
        • Brake Stoplight Switches
        • Brake Warning Light (Amber)
        • Brake Warning Light (Red)
        • Bulb Sockets
        • Bulbs And LEDS
        • Caliper Hardware
        • Caliper Mounting Pin
        • Caliper Piston
        • Caliper Shim
        • Caliper Slider Pin (Bolt) Dust Boot
        • Caliper Slider Pin (Bolt)
        • Calipers
        • Combination Valve
        • Controllers
        • Digital Ratio Axle Controllers And Buffers (Drab And Dram)
        • Disable Switches
        • Drums
        • Electrical Brake Pumps
        • Electrical Park Motor
        • Electrical Pumps And Motors
        • Electro-Magnetic Interference
        • Electronic Brake Control Modulator
        • Electronic Brake Distribution
        • Electronic Brake Traction Control Module
        • Electronic Controllers
        • Electronic Traction Control
        • External Brake Cable
        • Flow Control Valve
        • Fluid Level Sensor Switches
        • Fluid
        • Four Wheel Drive Switches
        • Friction Material
        • G Sensors
        • Gaskets
        • Gravitational Switches
        • Grease Seal
        • Height Sensing Proportioning Valve
        • High Pressure Accumulator
        • Hoses
        • Hub
        • Hydraulic Control Unit
        • Hydraulic Modulators
        • Hydro-Boosters
        • Hydro-Electric Boosters (POWERMASTER)
        • Ignition Disable Switches
        • Lamp Driver Relay
        • Lateral Acceleration Switches
        • LEDS
        • Lenses
        • Low Pressure Accumulator
        • Lug Nut
        • Master Cylinder Cover Gasket
        • Master Cylinders
        • Modulators
        • Motor Pack
        • Motors
        • Pads
        • Parking Brake Cable
        • Parking Brake Mechanism
        • Parking Brake Shoes
        • Parking Brake Switches
        • Parking Brake Systems
        • Pedal Travel Switches
        • Pedals
        • Power Distribution Center
        • POWERMASTER
        • Pressure Differential Switches
        • Pressure Switches
        • Pressure Transducers
        • Proportioning Valve
        • Pumps
        • Relays
        • RELUCTOR (Speed) Ring
        • Rotors
        • Self-Adjusting Systems
        • Shoe Hardware
        • Shoes
        • Sockets
        • Speed Sensor (RELUCTOR) Ring
        • Speed Sensors (Electronic Wheel And Vehicle)
        • Star Wheel
        • Steel Brake Lines
        • Stoplight Switches
        • Stroke Sensor
        • Switches
        • Tires
        • Tone Ring
        • Toothed Rings (Tone Wheel)
        • Traction Control System (TCS)
        • Transfer Tubes
        • Vacuum Boosters
        • Vacuum Hoses
        • Valves
        • Wear Indicator
        • Wheel Attachment Hardware
        • Wheel Bearings, Races And Seals
        • Wheel Cylinders
        • Wiring Harnesses
        • Yaw Rate Sensor
      • Brake System CHECKSHEET
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Map - Routine Inspection Reference Guide
      • Routine Inspection Reference Guide
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
        • Maintenance Overview
          • Antifreeze/Coolant
          • Visual Inspection
          • Radiator Cap Test
          • Engine Fan
          • Cooling System Power Flush And Refill
          • Belts (Except Timing Belts)
          • Belt TENSIONER
          • Automatic Transmission Fluid
          • Automatic Transmission Fluid Exchange & Filter Replacement
          • Engine Oil
          • Air Filters
          • Cabin Air Filter
          • Brake Fluid
          • Battery
          • Battery Cables
          • Power Steering
          • Power Steering Fluid
          • Wiper Blades
        • Routine Inspection CHECKSHEET
        • Routine Inspection - UICS
          • Brake Systems
            • Notes
            • Brake Fluid
            • Bulbs And LEDS
            • Hoses
            • Lenses
            • Lug Nut
            • Master Cylinder Cover Gasket
            • Parking Brake Cable
            • Vacuum Hoses
            • Wheel Attachment Hardware
            • Wheel Bearings, Races And Seals
          • Drivetrain And Transmission
            • Notes
            • Automatic Transmission Fluid
            • Clutch Master Cylinders
            • Cooler Lines
            • Coolers
            • Differential Fluid
            • Drain Plugs And Gaskets
            • Filters And Screens
            • Fluids And Lubricants
            • Hoses, Lines, And Tubes
            • Hydraulic Fluid
            • Lubricants
            • Manual Transmission Fluid
            • Mounts (Engine, Transaxle And Transmission)
            • Transfer Case Fluid
            • Vacuum Hoses
          • Electrical Systems
            • Batteries
            • Battery Cables
            • Battery Trays And Hold Down Hardware
            • Bulbs, Sealed Beams And LEDS
            • Fuses, Fusible Links And Circuit Breakers
            • Ground Cables And Straps
            • Ground Straps
            • Lenses
            • Sealed Beams
            • Washer Pumps
            • Wiper Arms And Blades
            • Wiper Hoses And Nozzles
            • Wiper Pump Reservoirs
          • Engine Performance And Maintenance
            • Notes
            • Accessory Belts
            • Air Filter Elements
            • Air Filter Gaskets
            • Air Filter Housings And Gaskets
            • Air Pump Belts
            • Batteries
            • Battery Connectors
            • Belt Idler Assemblies (Accessory And Cam Belts)
            • Belt TENSIONERS (Accessory And Cam Belt)
            • Chemical Engine DECARBONIZATION
            • Combustion Chamber Cleaning
            • Coolant Recovery Tanks
            • Coolant
            • Distributor Caps
            • Distributor Rotors
            • Engine Cooling Systems
            • Engine DECARBONIZATION
            • Engine Oil Drain Plugs And Gaskets
            • Engine Oil Filters And Canisters
            • Engine Oil
            • Fuel Filters
            • Fuel Injector Cleaning
            • Fuel Injectors
            • Fuel System Cleaning Service
            • Hose Clamps
            • Hose Connectors
            • Hose Couplers
            • Hoses And Tubes (Fuel Lines, Radiator, Vacuum, By-Pass, Heater, Recovery Tank And Oil Coolers)
            • Ignition Wires (Secondary)
            • Intake Cleaning
            • O2 Sensors
            • PCV Breather Elements
            • PCV Valves
            • Radiator Caps And Pressurized Expansion Tank Caps
            • Spark Plugs
            • Thermostats And Housings
            • Throttle Body Cleaning
            • Timing Belts
            • Vacuum Hoses, Tubes And Connections (Non-Metallic)
          • Exhaust Systems
            • Notes
            • Exhaust And Tail Pipes
          • Heating, Ventilation And Air Conditioning Systems
            • Notes
            • Belts
            • Cabin Air Filters
            • Coolant
            • Evaporator Drain Tubes
            • Evaporator Filters
            • In-Line Filters
            • Vacuum Hoses And Tubes
          • Steering And Suspension, Wheel Alignment, Wheels And Tires
            • Notes
            • Hydraulic Hoses
            • Power Steering Belts
            • Power Steering Fluid
            • Power Steering Hoses
            • Shock Absorbers, Strut Cartridges And Strut Assemblies
            • Strut Rods
            • Tire Pressure Monitoring System
            • Tire Pressure Sensors
            • Tires
            • Valve Stems
            • Wheel Attachment Hardware
            • Wheel Bearings, Races And Seals
      • Wheel & Tire Supplement
        • Notes
        • Tires
        • Mounting Tires
        • Vehicle Tire Placard
        • Tire Rotation
        • Wheel Lug Nut Torque & Clamping Force
        • Popular Tire Rotation Patterns
        • Wheels And Rims
        • Tire Pressure Monitoring Systems
        • Wheels & Tires CHECKSHEET
        • Wheel & Tire - UICS
          • Tire Pressure Monitoring System
          • Tire Pressure Sensors
          • Tires
          • Wheel Alignment
          • Wheel Attachment Hardware
          • Wheels (Rims)
      • Reason Code Explanation
      • Automotive Terminology & Definitions
  • Check Lists
    • Symptom Check List Worksheet - General Information
      • * Please Read This First *
      • Purpose
        • Notes
        • Why Use the Symptom Check List Worksheets?
        • Making the Worksheets a Part of Your Normal Routine
      • Symptom Check List Worksheets
        • Condensed Version - All On One Page
        • Full Version - All On Four Pages
        • Individual System-Based Check Lists
  • OBD-II Drive Cycles
    • * Please Read This First *
    • Drive Cycle Index
    • Drive Cycle Procedures
      • 1996 3000GT
      • 1996 Eclipse & Eclipse SPYDER
        • Notes
        • Catalytic Converter Monitor (P0420)
        • Heated Oxygen Sensor Monitor (P0130, P0136)
        • Exhaust Gas Recirculation (EGR) System Monitor (P0400)
        • Fuel Trim Monitor (P0170)
        • Other Monitoring
      • 1996-98 GALANT
        • Notes
        • Catalytic Converter Monitor (P0420, P0421)
        • Evaporative Emission Control System Leak Monitor (P0442, P0450, P0455)
        • Heated Oxygen Sensor Monitor (P0130, P0136)
        • Exhaust Gas Recirculation (EGR) System Monitor (P0400)
        • Fuel Trim Monitor (P0170)
        • Other Monitors
      • 1996-2000 Montero
        • Notes
        • Catalytic Converter Monitor (P0420, P0421, P0431)
        • Evaporative Emission Control System Leak Monitor (P0442, P0450, P0455)
        • Heated Oxygen Sensor Monitor (P0130, P0136, P0150, P0156)
        • Exhaust Gas Recirculation (EGR) System Monitor (P0400)
        • Fuel Trim Monitor (P0170, P0173)
        • Other Monitors
      • 1997 3000GT
        • Notes
        • Catalytic Converter Monitor (P0421, P0431)
        • Heated Oxygen Sensor Monitor (P0130, P0136, P0150, P0156)
        • Exhaust Gas Recirculation (EGR) System Monitor (P0400)
        • Fuel Trim Monitor (P0170, P0173)
        • Monitoring Of The Other Devices
      • 1997-1999 Eclipse 2.4L
        • Notes
        • Catalytic Converter Monitor (P0420, P0421)
        • Evaporative Emission Control System Leak Monitor (P0442, P0450, P0455)
        • Heated Oxygen Sensor Monitor (P0130, P0136)
        • Exhaust Gas Recirculation (EGR) System Monitor (P0400)
        • Fuel Trim Monitor (P0170)
        • Other Monitoring
      • 1997-99 Eclipse SPYDER With 2.0L Turbo And 2.4L
        • Notes
        • Catalytic Converter Monitor (P0420 & P0421)
        • Evaporative Emission Control System Leak Monitor (P0442, P0450, P0455)
        • Heated Oxygen Sensor Monitor (P0130, P0136)
        • Exhaust Gas Recirculation (EGR) System Monitor (P0400)
        • Fuel Trim Monitor (P0170)
        • Other Monitoring
      • 1997 Mirage 1.5L & 1.8L
        • Notes
        • Catalytic converter monitor (P0420, P0421)
        • Heated Oxygen Sensor Monitor (P0130, P0136)
        • Exhaust Gas Recirculation (EGR) System Monitor (P0400)
        • Fuel Trim Monitor (P0170)
        • Other Monitors
      • 1997-2000 MONTERO SPORT, 1998-99 3000GT, 1998-2001 Diamante, 1999-2000 GALANT & 1998-2000 MIRAGE
        • Catalytic Converter Monitor (P0420, P0421, & P0431)
        • EVAP System Leak Monitor (P0442, P0450 & P0455)
        • EGR Monitor (P0400)
        • Fuel Trim Monitor (P0170 & P0173)
        • Heated Oxygen Sensor Monitor (P0130, P0136, P0150 & P0156)
        • Other Monitor
      • 2000 Eclipse
        • Catalytic Converter Monitor
        • EVAP System Leak Monitor
        • EGR Monitor
        • Fuel Trim Monitor
        • Heated Oxygen Sensor Monitor
        • Other Monitor
      • 2001 Eclipse & Eclipse SPYDER
        • Catalytic Converter Monitor
        • EVAP System Leak Monitor
        • EGR Monitor
        • Fuel Trim Monitor
        • Heated Oxygen Sensor Monitor
        • Other Monitor
      • 2001 GALANT, 2004-05 Eclipse, Eclipse SPYDER, Lancer SPORTBACK, Montero Sport
        • Notes
        • Procedure 1 - Evaporative Emission Control System Leak Monitor
          • Drive cycle pattern
          • Inspection conditions
          • Test procedure
        • Procedure 2 - Fuel Trim Monitor
          • Drive cycle pattern
          • Inspection conditions
          • Test procedure
        • Procedure 3 - Catalytic Converter Monitor
          • Drive cycle pattern
          • Inspection conditions
          • Test procedure
        • Procedure 4 - Heated Oxygen Sensor Monitor
          • Drive cycle pattern
          • Inspection conditions
          • Test procedure
        • Procedure 5 - Exhaust Gas RECIRCULATION (EGR) System Monitor
          • Drive cycle pattern
          • Inspection conditions
          • Test procedure
        • PROCEDURE 6 - OTHER MONITOR (main Components, Sensors And Switches, Wire Breakage And Short Circuit)
          • Drive cycle pattern
          • Inspection conditions
          • Test procedure
      • 2001-02 Mirage
        • Notes
        • Catalytic Converter Monitor (P0421)
        • Evaporative Emission Control System Leak Monitor (P0441, P0442, P0451, P0452, P0453, P0455)
        • Heated Oxygen Sensor Monitor (P0133, P0139)
        • Fuel Trim Monitor (P0171, P0172)
        • Other Monitors
      • 2001 Montero
        • Notes
        • Pattern 1
          • Drive cycle pattern
          • Inspection conditions
          • Test procedure
        • Pattern 2
          • Inspection Condition
          • Test Procedure
        • Pattern 3
          • Drive cycle pattern
          • Inspection conditions
          • Test procedure
        • Pattern 4
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 5
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 6
          • Drive Cycle Pattern
          • Inspection Condition
          • Test Procedure
        • Pattern 7
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 8
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 9
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 10
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 11
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 12
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 13
          • Inspection Conditions
          • Test Procedure
        • Pattern 14
          • Inspection Conditions
          • Test Procedure
        • Pattern 15
          • Inspection Conditions
          • Test Procedure
        • Pattern 16
          • Inspection Conditions
          • Test Procedure
      • 2001 Montero Sport
        • Catalytic Converter Monitor
        • EVAP System Leak Monitor
        • EGR Monitor
        • Fuel Trim Monitor
        • Heated Oxygen Sensor Monitor
        • Other Monitor
      • 2002-04 Diamante
        • Catalytic Converter Monitor
        • EVAP System Leak Monitor
        • EGR Monitor
        • Fuel Trim Monitor
        • Heated Oxygen Sensor Monitor
        • Other Monitors
      • 2002-03 Eclipse
        • Catalytic Converter Monitor
        • EVAP System Leak Monitor
        • EGR Monitor
        • Fuel Trim Monitor
        • Heated Oxygen Sensor Monitor
        • Other Monitor
      • 2002-03 GALANT & Montero Sport
        • Catalytic Converter Monitor
        • EVAP System Leak Monitor
        • EGR Monitor
        • Fuel Trim Monitor
        • Heated Oxygen Sensor Monitor
        • Other Monitor
      • 2002-03 Lancer, Montero & 2003 Outlander
        • Notes
        • Pattern 1
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 2
          • Inspection Conditions
          • Test Procedure
        • Pattern 3
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 4
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 5
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 6
          • Inspection Conditions
          • Test Procedure
        • Pattern 7
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 8
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 9
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 10
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 11
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 12
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 13
          • Inspection Conditions
          • Test Procedure
        • Pattern 14
          • Test Procedure
        • Pattern 15
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 16
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 17
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 18
          • Inspection Conditions
          • Test Procedure
        • Pattern 19
          • Inspection Conditions
          • Test Procedure
        • Pattern 20
          • Inspection Conditions
          • Test Procedure
        • Pattern 21
          • Test Procedure
      • 2004-05 Endeavor, GALANT, Lancer, Montero & Outlander
        • Notes
        • Pattern 1
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 2
          • Inspection Condition
          • Test Procedure
        • Pattern 3
          • Drive cycle pattern
          • Inspection conditions
          • Test procedure
        • Pattern 4
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 5
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 6
          • Inspection Conditions
          • Test Procedure
        • Pattern 7
          • Drive Cycle Pattern
          • Inspection Condition
          • Test Procedure
        • Pattern 8
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 9
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 10
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 11
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 12
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 13
          • Inspection Conditions
          • Test Procedure
        • Pattern 14
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 15
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 16
          • Test Procedure
        • Pattern 17
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 18
          • Inspection Conditions
          • Test Procedure
        • Pattern 19
          • Inspection Conditions
          • Test Procedure
        • Pattern 20
          • Inspection Conditions
          • Test Procedure
        • Pattern 21
          • Inspection Conditions
          • Test Procedure
      • 2006-07 Eclipse, 07 Eclipse SPYDER, 2006-07 Endeavor, 2006 GALANT, 2007 GALANT 3.8L, 2006 Lancer 2.0L, 2007 Lancer
        • Notes
        • Pattern 1
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 2
          • Inspection Conditions
          • Test Procedure
        • Pattern 3
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 4
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 5
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 6
          • Inspection Conditions
          • Test Procedure
        • Pattern 7
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 8
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 9
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 10
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 11
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 12
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 13
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 14
          • Inspection Conditions
          • Test Procedure
        • Pattern 15
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 16
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 17
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 18
          • Inspection Conditions
          • Test Procedure
        • Pattern 19
          • Inspection Conditions
          • Test Procedure
        • Pattern 20
          • Inspection Conditions
          • Test Procedure
        • Pattern 21
          • Inspection Conditions
          • Test Procedure
        • Pattern 22
          • Inspection Conditions
          • Test Procedure
      • 2006 Lancer 2.4L, Lancer Evolution, Lancer SPORTBACK, Montero & Outlook
        • Notes
        • Pattern 1
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 2
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 3
          • Inspection Condition
          • Test Procedure
        • Pattern 4
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 5
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 6
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 7
          • Inspection Conditions
          • Test Procedure
        • Pattern 8
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 9
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 10
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 11
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 12
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 13
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 14
          • Inspection Conditions
          • Test Procedure
        • Pattern 15
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 16
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 17
          • Test Procedure
        • Pattern 18
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 19
          • Inspection Conditions
          • Test Procedure
        • Pattern 20
          • Inspection Conditions
          • Test Procedure
        • Pattern 21
          • Inspection Conditions
          • Test Procedure
        • Pattern 22
          • Inspection Conditions
          • Test Procedure
        • Pattern 23
          • Inspection Conditions
          • Test Procedure
      • 2007 GALANT 2.4L, Outlander
        • Notes
        • Pattern 1
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 2
          • Inspection Condition
          • Test Procedure
        • Pattern 3
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 4
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 5
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 6
          • Inspection Conditions
          • Test Procedure
        • Pattern 7
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 8
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 9
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 10
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 11
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 12
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 13
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 14
          • Inspection Conditions
          • Test Procedure
        • Pattern 15
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 16
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 17
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 18
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 19
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 20
          • Inspection Conditions
          • Test Procedure
        • Pattern 21
          • Inspection Conditions
          • Test Procedure
        • Pattern 22
          • Inspection Conditions
          • Test Procedure
        • Pattern 23
          • Inspection Conditions
          • Test Procedure
        • Pattern 24
          • Inspection Conditions
          • Test Procedure
        • Pattern 25
          • Inspection Conditions
          • Test Procedure
      • 2007-09 Raider
        • Notes
        • Monitor Preliminary Checks
        • Evaporative Emission System Leak Detection with Purge Monitor
        • Catalyst / O2 Monitor
        • EGR Monitor
        • O2 Sensor Heater Monitor
        • Misfire Monitor
      • 2008-10 Eclipse, Eclipse SPYDER, Endeavor, GALANT, Lancer & Outlander
        • Notes
        • Pattern 1
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 2
          • Inspection Condition
          • Test Procedure
        • Pattern 3
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 4
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 5
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 6
          • Inspection Conditions
          • Test Procedure
        • Pattern 7
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 8
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 9
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 10
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 11
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 12
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 13
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 14
          • Inspection Conditions
          • Test Procedure
        • Pattern 15
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 16
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 17
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 18
          • Inspection Conditions
          • Test Procedure
        • Pattern 19
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 20
          • Inspection Conditions
          • Test Procedure
        • Pattern 21
          • Inspection Conditions
          • Test Procedure
        • Pattern 22
          • Inspection Conditions
          • Test Procedure
        • Pattern 23
          • Inspection Conditions
          • Test Procedure
        • Pattern 24
          • Inspection Conditions
          • Test Procedure
        • Pattern 25
          • Inspection Conditions
          • Test Procedure
        • Pattern 26
          • Inspection Conditions
          • Test Procedure
        • Pattern 27
          • Inspection Conditions
          • Test Procedure
      • 2011-12 Eclipse, Endeavor, GALANT
        • Notes
        • Pattern 1
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 2
          • Inspection Conditions
          • Test Procedure
        • Pattern 3
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 4
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 5
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 6
          • Inspection Conditions
          • Test Procedure
        • Pattern 7
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 8
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 9
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 10
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 11
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 12
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 13
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 14
          • Inspection Conditions
          • Test Procedure
        • Pattern 15
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 16
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 17
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 18
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 19
          • Inspection Conditions
          • Test Procedure
        • Pattern 20
          • Inspection Conditions
          • Test Procedure
        • Pattern 21
          • Inspection Conditions
          • Test Procedure
        • Pattern 22
          • Inspection Conditions
          • Test Procedure
        • Pattern 23
          • Inspection Conditions
          • Test Procedure
        • Pattern 24
          • Inspection Conditions
          • Test Procedure
        • Pattern 25
          • Inspection Conditions
          • Test Procedure
      • 2011-12 Lancer 2.0L W/O Turbo & 2.4L & Outlander 2.4L & Outlander Sport
        • Notes
        • Pattern 1
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 2
          • Test Procedure
        • Pattern 3
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 4
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 5
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 6
          • Inspection Conditions
          • Test Procedure
        • Pattern 7
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 8
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 9
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 10
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 11
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 12
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 13
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 14
          • Inspection Conditions
          • Test Procedure
        • Pattern 15
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 16
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 17
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 18
          • Inspection Conditions
          • Test Procedure
        • Pattern 19
          • Inspection Conditions
          • Test Procedure
        • Pattern 20
          • Inspection Conditions
          • Test Procedure
        • Pattern 21
          • Inspection Conditions
          • Test Procedure
        • Pattern 22
          • Inspection Conditions
          • Test Procedure
        • Pattern 23
          • Inspection Conditions
          • Test Procedure
      • 2011-12 Lancer 2.0L Turbo
        • Notes
        • Pattern 1
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 2
          • Inspection Conditions
          • Test Procedure
        • Pattern 3
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 4
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 5
          • Inspection Conditions
          • Test Procedure
        • Pattern 6
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 7
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 8
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 9
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 10
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 11
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 12
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 13
          • Inspection Conditions
          • Test Procedure
        • Pattern 14
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 15
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 16
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 17
          • Inspection Conditions
          • Test Procedure
        • Pattern 18
          • Inspection Conditions
          • Test Procedure
        • Pattern 19
          • Inspection Conditions
          • Test Procedure
        • Pattern 20
          • Inspection Conditions
          • Test Procedure
        • Pattern 21
          • Inspection Conditions
          • Test Procedure
        • Pattern 22
          • Inspection Conditions
          • Test Procedure
        • Pattern 23
          • Inspection Conditions
          • Test Procedure
      • 2011-12 OUTLANTER 3.0L
        • Notes
        • Pattern 1
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 2
          • Inspection Conditions
          • Test Procedure
        • Pattern 3
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 4
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 5
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 6
          • Inspection Conditions
          • Test Procedure
        • Pattern 7
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 8
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 9
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 10
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 11
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 12
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 13
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 14
          • Inspection Conditions
          • Test Procedure
        • Pattern 15
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 16
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 17
          • Drive Cycle Pattern
          • Inspection Conditions
          • Test Procedure
        • Pattern 18
          • Inspection Conditions
          • Test Procedure
        • Pattern 19
          • Inspection Conditions
          • Test Procedure
        • Pattern 20
          • Inspection Conditions
          • Test Procedure
        • Pattern 21
          • Inspection Conditions
          • Test Procedure
        • Pattern 22
          • Inspection Conditions
          • Test Procedure
        • Pattern 23
          • Inspection Conditions
          • Test Procedure
  • Driveline/Axles
    • Drive Axle Noise Diagnosis - General Information
      • * Please Read This First *
      • Unrelated Noises
      • Non-Drive Axle Noises
      • Gear Noise
      • Chuckle
      • Knock
      • Clunk
      • Bearing Whine
      • Bearing Rumble
      • Chatter On Turns
      • Axle Shaft Noise
      • Vibration
    • Gear Tooth Contact Patterns - General Information
      • * Please Read This First *
      • Inspection
        • Notes
        • Gear Tooth Contact Pattern
      • Adjustments
        • Notes
        • Gear Backlash & Pinion Shim Changes
    • Map - Drive Train & Transmission
      • Drive Train & Transmission Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
      • Drivetrain And Transmission
        • Notes
        • Actuators (Electrical)
        • Actuators (Vacuum)
        • Automatic Transmission / Transaxle Assemblies/CVTS
        • Automatic Transmission Fluid
        • Axles
        • Bearings And Races
        • Bell Cranks
        • Bell Housings
        • Bushings (External)
        • Cables (Speedometer)
        • Cables (TV, Detent And Shift)
        • Carrier Bearings
        • Clutch Cables And Cable Housings
        • Clutch Discs (Manual Transmissions)
        • Clutch Forks
        • Clutch Linkages (Mechanical)
        • Clutch Master Cylinders
        • Clutch Pedals
        • Clutch Pivots
        • Clutch Pressure Plates
        • Clutch Release Bearings
        • Clutch Slave Cylinders (Concentric)
        • Clutch Slave Cylinders (Conventional Or External)
        • Companion Flanges
        • Connectors
        • Cooler Bypass Valves
        • Cooler Lines
        • Coolers
        • CV Joints
        • Differential And Final Drive Assemblies
        • Differential Fluid
        • Dip Stick Tubes
        • Dip Sticks (Fluid Level Indicators)
        • Dowel Pins, Guides And Pilot Holes
        • Drain Plugs And Gaskets
        • Drive Shaft Flanges
        • Drive Shafts And Half Shafts
        • Dust Boots
        • Engine Mounts
        • Exciter Rings
        • Filler Tubes
        • Filters And Screens
        • Flanges
        • Flex Plates
        • Fluid Level Indicators
        • Fluids And Lubricants
        • Flywheels
        • Force Motors
        • Gaskets
        • Guides
        • Half Shafts
        • Hoses, Lines, And Tubes
        • Housings (Bell, Case, Tail(Extension) And Auxiliary)
        • Hydraulic Fluid
        • Intermediate Shaft Support Bearings
        • Key Interlock Systems
        • Limited Slips
        • Lines
        • Linkages (External)
        • Locking Hub Assemblies
        • Locking Hub Control Knobs
        • Lubricants
        • Manual Transmission Fluid
        • Manual Transmission/Transaxle Assemblies
        • Metal Clad Seals
        • METALASTIC Joints
        • Modulator Pins
        • Modulators
        • Mounts (Engine, Transaxle And Transmission)
        • Odometer Drives (Mechanical)
        • Odometer Heads (Mechanical)
        • Oil Pans
        • Pans
        • Pilot Holes
        • Pressure Plates
        • Pressure Switches
        • Races
        • Rubber Joints (METALASTIC)
        • Screens
        • Seals (Metal Clad)
        • Seals
        • Selector Interlock Systems
        • Sensors
        • Servos
        • Shift Interlock Systems (Selector And Key Interlock Systems)
        • Side Covers
        • Slip Yokes
        • Solenoids
        • Speed Sensors (Electronic Wheel And Vehicle)
        • Speedometer- Driven Gear Housing
        • Speedometer/Odometer Drives (Mechanical)
        • Speedometer/Odometer Heads (Mechanical)
        • Speedometers/Odometers (Electronic)
        • Switches
        • Tone Wheels
        • Toothed Rings (Tone Wheel)
        • Torque Converters
        • Transaxle Mounts
        • Transducers (Transmission)
        • Transfer Case Assemblies
        • Transfer Case Fluid
        • Transmission Coolers
        • Transmission Mounts
        • Transmission Pans
        • Transmission Range Indicators (PRNDL)
        • Tubes
        • Universal Joints (CARDAN Or Cross Type)
        • Vacuum Controls
        • Vacuum Hoses
        • Vacuum Motors
        • Vacuum-Operated Switches
        • Vehicle Speed Sensors
        • Vents
        • Vibration Dampers
        • Wheel Attachment Hardware
        • Wheel Speed Sensors
        • Wiring Harnesses And Connectors
        • Yokes And Slip Yokes
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Trouble Shooting - Clutches - General Information
      • * Please Read This First *
      • All Models
  • DTC Index
    • Automatic Air Conditioning DTCS
    • Automatic Transaxle System DTCS
    • Combination Meter DTCS
    • Heating, Air Conditioning And Ventilation DTCS
    • Immobilizer System DTCS
    • MULTIPORT Fuel Injection (MFI) DTCS
      • 2.4L
      • 3.8L
    • Simplified Wiring System (SWS) DTCS
    • Supplemental Restraint System (SRS) DTCS
    • Traction Control/Active Stability Control System DTCS
      • Abs/TCL/ASC-Ecu
      • Steering Wheel Sensor
    • Tire Pressure Monitoring System (TPMS) DTCS
  • Electrical
    • Map - Electrical Systems
      • Electrical Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
        • Actuator Motors (Electric)
        • Actuator Motors (Vacuum)
        • Air Bags
        • Alternators And Generators
        • Amplifiers
        • Antennas
        • Batteries
        • Battery Cables, Wires And Connectors
        • Battery Cables
        • Battery Trays And Hold Down Hardware
        • Battery Wires
        • Belts
        • Bulb Sockets
        • Bulbs, Sealed Beams And LEDS
        • Cd Players
        • Cigarette Lighter Assemblies
        • Circuit Breakers
        • Clutch Switches
        • Connectors
        • Control Modules
        • Cruise Control Brake Switches
        • Cruise Control Cables
        • Cruise Control Clutch Switches
        • Cruise Control Linkages And Cables
        • Cruise Control Reservoirs
        • Cruise Control Tubes
        • Cruise Control Vacuum Dump Release Valves
        • Cruise Control Vacuum Hoses, Tubes And
        • Cruise Control Vehicle Speed Sensors
        • Defoggers
        • Defrosters
        • Delays
        • Dimmers
        • Electric Heaters
        • Equalizers
        • Fuse Blocks
        • Fuse Boxes And Blocks
        • Fuses, Fusible Links And Circuit Breakers
        • Fusible Links
        • Gauges
        • Generators
        • Ground Cables And Straps
        • Ground Straps
        • Headlight Adjusters
        • Heating Elements (Defrosters, Defoggers, Electric Heaters And Seats)
        • Horns And Sirens
        • Ignition Switches
        • Indicator Lights
        • Keyless Entry Keypads And Transmitters
        • Keyless Entry Transmitters
        • LEDS
        • Lenses
        • Microphones
        • Mirrors (ELECTROCHROMATIC And Heated)
        • Motors
        • Neutral Safety Switches
        • Odometers, Speedometers And Tachometers (Cable Driven)
        • Odometers
        • Power Distribution Center
        • Pulleys
        • Receivers, Amplifiers, Equalizers And Sub-Woofer Volume Controls
        • Relay Boxes
        • Relays
        • Sealed Beams
        • Seat Heaters
        • Security Alarm Sensors
        • Sirens
        • Solenoids
        • Speakers And Microphones
        • Speedometer And Tachometer Linkages And Cables
        • Speedometer Cables
        • Speedometers
        • Starters
        • Sub-Woofer Volume Control
        • Switches
        • Tachometer Cables
        • Tachometers
        • Tape Players And Cd Players
        • TENSIONERS
        • Timers
        • Transceivers
        • Transducers
        • Vacuum Accumulators (Reservoirs)
        • Voltage Regulators
        • Washer Fluid Level Senders
        • Washer Pumps
        • Wiper Arms And Blades
        • Wiper Blades
        • Wiper Hoses And Nozzles
        • Wiper Linkages
        • Wiper Nozzles
        • Wiper Pump Reservoirs
        • Wiring Harnesses And Connectors
      • Battery, Starting & Charging System CHECKSHEET
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Using lemon2025'S System Wiring Diagrams
      • Introduction
      • Wiring Diagram Features And Controls
      • Wiring Diagram Color Abbreviations
      • Wiring Diagram Symbols
      • Wiring Diagram Ground Number Locations
      • Wiring Diagram Component Locations
  • Engine
    • Engine Overhaul Procedures - General Information
      • * Please Read This First *
      • Description
      • Engine Identification
      • Inspection Procedures
        • * Please Read This First *
        • General
        • Magnetic Particle Inspection
          • Notes
          • Magnaflux & Magnaglo
        • Penetrant Inspection
          • Notes
          • Zyglo
          • Dye Check
        • Ultrasonic Inspection
        • X-Ray Inspection
        • Pressure Testing
      • Cleaning Procedures
        • * Please Read This First *
        • General
        • Bead Blasting
        • Chemical Cleaning
      • Component Cleaning
        • * Please Read This First *
        • Sheet Metal Parts
        • Intake & Exhaust Manifolds
      • Cylinder Head Replacement
        • * Please Read This First *
        • Removal
        • Installation
        • Valve Adjustment
      • Cylinder Head Overhaul
        • * Please Read This First *
        • Cylinder Head Disassembly
        • Cylinder Head Cleaning & Inspection
        • Valve Springs
        • Valve Guide
          • Notes
          • Measuring Valve Guide Clearance
          • Reaming Valve Guide
          • Replacing Valve Guide
        • Valves & Valve Seats
          • Notes
          • Valve Grinding
          • Valve Lapping
          • Valve Seat Grinding
          • Valve Seat Replacement
          • Valve Seat Concentricity
        • Cylinder Head Reassembly
          • Notes
          • Valve Stem Installed Height
        • Valve Stem Oil Seals
          • Notes
          • Replacement (On-Vehicle)
        • Valve Spring Installed Height
        • Rocker Arms & Assemblies
          • Notes
          • Rocker Studs
          • Rocker Arms & Shafts
        • Push Rods
        • Lifters
          • Notes
          • Hydraulic Lifters
          • Mechanical Lifters
      • Pistons, Connecting Rods & Bearings
        • * Please Read This First *
        • Ridge Removal
        • Piston & Connecting Rod Removal
        • Piston & Connecting Rod
          • Notes
          • Disassembly
          • Cleaning
          • Inspection
        • Piston & Cylinder Bore Fit
        • Assembling Piston & Connecting Rod
        • Checking Piston Ring Clearances
        • Piston & Connecting Rod Installation
        • Connecting Rod Side Clearance
        • Main & Connecting Rod Bearing Clearance
          • Notes
          • Plastigage Method
          • Micrometer & Telescopic Gauge Method
      • Crankshaft & Main Bearings
        • * Please Read This First *
        • Removal
        • Cleaning & Inspection
        • Installation
        • Crankshaft End Play
          • Notes
          • Dial Indicator Method
          • Feeler Gauge Method
        • Cylinder Block
          • Notes
          • Block Cleaning
          • Block Inspection
          • Cylinder Bore Inspection
          • Cylinder Honing
          • Deck Warpage
          • Deck Height
          • Main Bearing Bore & Alignment
          • Expansion Plug Removal
          • Expansion Plug Installation
          • Oil Gallery Plug Removal
          • Oil Gallery Plug Installation
      • Camshaft
        • * Please Read This First *
        • Cleaning & Inspection
        • Camshaft Bearings
          • Notes
          • Removal & Installation
        • Camshaft Installation
        • Camshaft End Play
      • Timing Chains & Belts
        • * Please Read This First *
        • Timing Chains
        • Timing Belts
        • Tension Adjustment
      • Timing Gears
        • * Please Read This First *
        • Timing Gear Backlash & RUNOUT
        • Rear Main Oil Seal Installation
          • Notes
          • One-Piece Type Seal
          • Rope Type Seal
          • Split-Rubber Type Seal
      • Oil Pump
        • * Please Read This First *
        • Rotor Type
        • Gear Type
      • Break-In Procedure
        • * Please Read This First *
        • Engine Pre-Oiling
        • Initial Start-Up
        • Camshaft
        • Piston Rings
        • Final Adjustments
    • General Cooling System Service - General Information
      • * Please Read This First *
      • Description
      • Maintenance
        • Draining
        • Flushing
          • Notes
          • Radiator
          • Engine Block
        • Refilling
      • Testing
        • Thermostat
        • Pressure Testing
          • Notes
          • Radiator Cap
          • Cooling System
  • Engine Performance
    • Electrostatic Discharge Warning - General Information
      • * Please Read This First *
      • Introduction
      • Handling Static-Sensitive Circuits/Devices
      • Checking Static-Sensitive Circuits/Devices
    • Engine Performance Diagnostic Routine Outline - General Information
      • * Please Read This First *
      • Where Does DRIVEABILITY Diagnosis Start?
        • Perform Basic Inspection
        • Check For Trouble Codes
        • Diagnose Symptom
        • Test System
    • Engine Performance Safety Precautions
      • Engine Performance Safety Precautions
    • Map - Engine Performance & Maintenance
      • Engine Performance And Maintenance (Including Exhaust Systems)
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
      • Engine Performance & Maintenance CHECKSHEET
      • Engine Performance And Maintenance
        • Notes
        • Accelerator Pedal Position Sensor
        • Accessory Belts
        • Accessory Pulleys
        • Air Conditioning Cycling Switches
        • Air Conditioning Pressure Sensors
        • Air Ducts And Tubes
        • Air Filter Elements
        • Air Filter Gaskets
        • Air Filter Housings And Gaskets
        • Air Fuel Ratio Sensors
        • Air Injection Control Solenoids
        • Air Plenums
        • Air Pump Belts
        • Air Pumps (Electric Driven)
        • Air Tubes
        • Aspirator, Check And DECEL Valves
        • Baffles
        • Ballast Primary Supply Resistor Wires
        • Ballast Resistors And Primary Supply Resistors
        • Barometric Pressure Sensors
        • Batteries
        • Battery Cables, Wires And Connectors
        • Battery Connectors
        • Battery Trays And Hold Down Hardware
        • Battery Wires
        • Belt Idler Assemblies (Accessory And Cam Belts)
        • Belt TENSIONERS (Accessory And Cam Belt)
        • Belt-Driven Air Pumps
        • Boost Control Mechanism
        • Camshaft Position Sensors
        • Carburetors And Chokes
        • Casting Core Plugs And Expansion Plugs
        • Charge Air Coolers ""INTERCOOLERS"" (CAC)
        • Check Valves
        • Chemical Engine DECARBONIZATION
        • Chokes
        • Clutch Pedal Position Switches
        • Cold Start Injectors
        • Combustion Chamber Cleaning
        • Connectors
        • Coolant Recovery Tanks
        • Coolant
        • Cooling Fan Motor Modules
        • Cooling Fan Motor Relays And Modules
        • Cooling Fan Motor Resistors
        • Cooling Fan Motor Sensors And Switches
        • Cooling Fan Motor Switches
        • Cooling Fan Motors
        • Crankshaft Position Sensors
        • Cylinder Deactivation Solenoid
        • Cylinder Head Assemblies
        • DECEL Valves
        • Deflectors
        • Dip Stick Tubes
        • Dip Sticks And Tubes
        • Distributor Advances And Retarders (Mechanical And Vacuum)
        • Distributor Boots And Shields
        • Distributor Caps
        • Distributor Retarders (Mechanical And Vacuum)
        • Distributor Rotors
        • Distributor Shields
        • Distributors
        • Early Fuel Evaporation Valves (Heat Riser Assemblies)
        • EGR Coolers
        • EGR Exhaust Manifold Passages
        • EGR Intake And Exhaust Manifold Passages
        • EGR Plates And Coolers
        • Electronic Spark Control Modules
        • Electronic Transmission Control Devices
        • Electronic Transmission Feedback Devices
        • Engine Coolant Temperature Sensors
        • Engine Cooling Systems
        • Engine Covers (Oil Pan, Valve Cover, Timing Cover)
        • Engine DECARBONIZATION
        • Engine Oil Canisters
        • Engine Oil Coolers (External)
        • Engine Oil Drain Plugs And Gaskets
        • Engine Oil Filters And Canisters
        • Engine Oil Gaskets
        • Engine Oil Pressure Gauges (Mechanical)
        • Engine Oil
        • Evaporative Emissions (EVAP) Canister Filters
        • Evaporative Emissions (EVAP) Canister Purge Devices
        • Evaporative Emissions (EVAP) Canisters
        • Evaporative Emissions (EVAP) Feedback Devices
        • Exhaust Gas RECIRCULATION Devices
        • Exhaust Gas RECIRCULATION Feedback Devices
        • Expansion Plugs
        • Fan Control Sensor
        • Fuel Accumulators And Dampers
        • Fuel And Cold Start Injectors
        • Fuel Caps
        • Fuel Dampers
        • Fuel Delivery Check Valves
        • Fuel Distributors (BOSCH Cis)
        • Fuel Filler Necks And RESTRICTORS
        • Fuel Filters
        • Fuel Injector Cleaning
        • Fuel Injectors
        • Fuel Level Senders
        • Fuel Pressure Regulators
        • Fuel Pumps (In-Tank, External, Electrical Or Mechanical)
        • Fuel Rails
        • Fuel RESTRICTORS
        • Fuel System Cleaning Service
        • Fuel Tanks
        • Fuel
        • Gaskets
        • Grommets (Valve Cover)
        • Harmonic Dampers
        • Heater Control Valves
        • Heater Cores
        • Hose Clamps
        • Hose Connectors
        • Hose Couplers
        • Hoses And Tube Couplers, Connectors And Clamps
        • Hoses And Tubes (Fuel Lines, Radiator, Vacuum, By-Pass, Heater, Recovery Tank And Oil Coolers)
        • Housings
        • Idle Air Controls
        • Idle Speed Control Actuators
        • Ignition Boots
        • Ignition Coil Towers
        • Ignition Coils
        • Ignition Control Modules (ICM)
        • Ignition Switches
        • Ignition Terminals
        • Ignition Wires (Secondary)
        • Inertia Fuel Shut-Off Switches
        • Intake Air Temperature Sensors
        • Intake Cleaning
        • Intake Manifolds
        • In-Tank Fuel Strainers
        • INTERCOOLERS
        • Knock Sensors
        • Liquid Vapor Separators
        • Long Block Assemblies
        • Manifold Absolute Pressure (Map) Sensors
        • Mass Air Flow (MAF) Sensors
        • Metal Air Manifolds And Pipes
        • Metal Air Pipes
        • Mix Control Solenoids
        • Motor Mounts
        • O2 Sensors
        • Oil Pans
        • Oil Pressure Sending Units
        • Oil Pump Pick-Up Screens
        • Oil Pumps
        • O-Rings, Gaskets, Seals And Spring Locks
        • Park Neutral Position Switches
        • PCV Breather Elements
        • PCV Orifices
        • PCV Valves
        • Pick-Up Assemblies (Includes Magnetic, Hall Effect And Optical)
        • Power Steering Pressure Sensors
        • Powertrain Control Modules (Pcm) And Prom
        • Powertrain Control Prom
        • Pressurized Expansion Tank Caps
        • Radiator / Cooling Fan Blades
        • Radiator / Cooling Fan Clutches
        • Radiator Caps And Pressurized Expansion Tank Caps
        • Radiators
        • Roll Over Valves
        • Sealing Compounds
        • Seals
        • Secondary Air Injection System Management Devices
        • Sensors
        • Short Block Assemblies
        • Shrouds, Baffles And Deflectors
        • Spark Plugs
        • Spring Locks
        • Super Chargers
        • Switches
        • Thermal Vacuum Valves
        • Thermostatic Air Door Assemblies
        • Thermostats And Housings
        • Throttle Bodies
        • Throttle Body Cleaning
        • Throttle Cables
        • Throttle Linkages And Cables
        • Throttle Position Sensors
        • Throttle Position Switches
        • Timing Belt Sprockets
        • Timing Belts
        • Timing Covers
        • Torque Struts
        • Transmission Range Switches
        • Tube Clamps
        • Tube Connectors
        • Tube Couplers
        • Tubes
        • Turbo Chargers
        • Vacuum Connections
        • Vacuum Hoses, Tubes And Connections (Non-Metallic)
        • Vacuum Regulator Solenoids
        • Vacuum Tubes
        • Valve Covers
        • Vehicle Speed Senors
        • Volume Air Flow Sensors
        • Waste Gate And Boost Control Mechanisms
        • Waste Gate Control Solenoids
        • Water Pumps (Electric)
        • Water Pumps (Non-Electric)
        • Wiring Harnesses And Connectors
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Parasitic Load Explanation & Test Procedures - General Information
      • * Please Read This First *
      • General Information
      • Testing For Parasitic Load
        • Notes
        • CHRYSLER Ignition Off Draw (IOD) Test
        • Test Procedure Using Test Switch
        • Intermittent Parasitic Load Problems
        • Diode Check & Solenoid Test
        • Quad Driver Test
    • State Emission Standards - Diesel
      • ARIZONA
      • Colorado
      • CONNECTICUT
      • IDAHO
      • KENTUCKY
      • MASSACHUSETTS
      • New YORK
      • OHIO
      • RHODE Island
      • UTAH
      • WASHINGTON
    • State Emission Standards - Gas
      • ALASKA
      • ARIZONA
      • CALIFORNIA
        • California Emission Standards ASM Tests
        • Legend
        • Pass/Fail Emission Standards = A+B / VTW
      • Colorado
      • CONNECTICUT
      • DELAWARE
      • District Of COLUMBIA
      • GEORGIA
      • IDAHO
      • ILLINOIS
      • INDIANA
      • KENTUCKY
      • MARYLAND
      • MASSACHUSETTS
      • MISSOURI
      • NEVADA
      • New Jersey
      • New MEXICO
      • New YORK
      • North CAROLINA
      • OHIO
      • OREGON
      • PENNSYLVANIA
      • RHODE Island
      • TENNESSEE
      • TEXAS
      • UTAH
      • VIRGINIA
      • WASHINGTON
      • WISCONSIN
      • U. S. EPA ASM2525 & ASM5015 Start-Up Emission Standards
      • U. S. EPA Revised Final ASM Emission Standards (ASM5015 & ASM2525)
      • U.S. EPA Im240 Emission Standards
        • Start-Up Standards
        • Final Standards
    • Waveforms - Injector Pattern Tutorial - General Information
      • * Please Read This First *
      • Purpose Of This Article
        • Notes
        • Scope Of This Article
      • Is A Lab Scope Necessary?
        • Introduction
        • Overview Of NOID Light
          • Notes
          • Use the Right Noid Light
        • Overview Of DVOM
          • Notes
          • Checking Injector Resistance
          • Checking Available Voltage At the Injector
          • Checking Injector On-Time With Built-In Function
          • Checking Injector On-Time With Dwell Or Duty
          • How A Duty Cycle Meter and Dwell Meter Work
          • Strengths of Dwell/Duty Meter
          • Weaknesses of Dwell/Duty Meter
      • The Two Types Of Injector Drivers
        • Notes
        • Overview
        • Voltage Controlled Circuit ("Saturated Switch")
        • Current Controlled Circuit ("Peak & Hold")
      • The Two Ways Injector Circuits Are Wired
      • Interpreting Injector Waveforms
        • Notes
        • Interpreting A Voltage Controlled Pattern
        • Interpreting A Current Controlled Pattern
      • Current Waveform Samples
        • Notes
        • Example #1 - Voltage Controlled Driver
        • Example #2 - Voltage Controlled Driver
        • Example #3 - Voltage Controlled Driver
        • Example #4 - Current Controlled Driver
        • Example #5 - Current Controlled Driver
        • Example #6 - Current Controlled Driver
        • Example #7 - Current Controlled Driver
        • Example #8 - Current Controlled Driver
      • Voltage Waveform Samples
        • Notes
        • Example #1 - Voltage Controlled Driver
        • Example #2 - Voltage Controlled Driver
        • Example #3 - Voltage Controlled Driver
        • Example #4 - Current Controlled Driver
        • Example #5 - Current Controlled Driver
        • Example #6 - Current Controlled Driver
        • Example #7 - Current Controlled Driver
        • Example #8 - Current Controlled Driver
  • Map - Exhaust Systems
    • Exhaust Systems
      • Notes
      • Map Standards Of Service
      • The Map Process - Overview
      • The Map Process - Overview Of Service Requirements And Suggestions
      • Catalytic Converters
      • Exhaust And Tail Pipes
      • Exhaust Connections
      • Hangers
      • Heat Risers (Mechanical EFE Devices)
      • Heat Shields
      • Manifolds (Cast And Tube Type)
      • Mechanical EFE Devices
      • Muffler Valve
      • Mufflers And Resonators
    • Reason Code Explanation
  • Heating, Ventilation & A/C (HVAC)
    • Map - Heating, Ventilation, & Air Conditioning
      • Heating, Ventilation & Air Conditioning Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
        • Accumulators
        • Actuators (Electrical)
        • Actuators (Vacuum)
        • Air Conditioning Fittings
        • Air Conditioning Hoses
        • Air Conditioning Metal Lines
        • Air Control Doors
        • Air Dams (External)
        • Air Distribution System
        • Belts
        • Blend Doors
        • Blower Fans (Blower Wheel Or Squirrel Cage)
        • Blower Motors
        • Blower Resistors
        • Blower Switches
        • Cabin Air Filters
        • Circuit Breakers
        • Compressor Clutch Assemblies
        • Compressors
        • Condenser Air Seals
        • Condenser Fan Motors
        • Condensers
        • Connectors
        • Control Cables
        • Control Heads (Function Selectors)
        • Control Linkages
        • Control Modules
        • Coolant
        • Cooling Fan Blades
        • Cooling Fan Clutches
        • Cooling Fan Motors
        • Evaporator Drain Tubes
        • Evaporator Filters
        • Evaporator Pressure Regulators (EPRS)
        • Evaporators
        • Expansion Valves
        • Function Selectors
        • Fuses, Fusible Links And Circuit Breakers
        • Fusible Links
        • Gaskets
        • Heater Cases
        • Heater Control Valves
        • Heater Cores
        • Heater Hoses
        • High Pressure Relief Valves (HPRV)
        • Idlers
        • In-Line Filters
        • Metal Fittings
        • Metal Lines
        • Mix And Air Control Doors (Blend Doors)
        • ORIFACE Tubes
        • O-Rings
        • Pilot-Operated Absolutes (POAS)
        • Plenums
        • Pressure Control Valves
        • Pressure Sensors
        • Pulleys
        • Radiators
        • Receiver-DRIERS
        • Refrigerant Oil
        • Refrigerant
        • Relays
        • Seals
        • Service Ports
        • Spring Lock Couplings
        • Suction Throttling Valves (STVS)
        • Switches (Electrical)
        • TENSIONERS
        • Thermistors And Pressure Sensors
        • Thermostats And Housings
        • Vacuum Hoses And Tubes
        • Vacuum Reservoirs
        • Vacuum Tubes
        • Valves In Receiver (VIRS)
        • Water Pumps (Electric Auxiliary)
        • Wiring Harnesses And Connectors
      • Heating, Ventilation & Air Conditioning System CHECKSHEET
      • Reason Code Explanation
      • Automotive Terminology & Definitions
  • Hoist/Jack
    • General Information
      • How To Use This Manual
        • Maintenance, Repair And Servicing Explanations
        • On-Vehicle Service
        • Service Procedures
        • Definition Of Terms
          • Standard Value
          • Limit
          • Reference Value
        • Danger, Warning, And Caution
          • Notes
          • Tightening Torque Indication
          • Special Tool Note
          • Abbreviations
      • Troubleshooting Guidelines
        • Verify The Complaint
        • Determine Possible Causes
        • Find The Problem
        • Repair The Problem
        • Verify The Repair
      • How To Use Troubleshooting/Inspection Service Points
        • Troubleshooting Contents
          • Notes
          • 1. Standard Flow Of Diagnostic Troubleshooting
          • 2. System Operation And Symptom Verification Tests
          • 3. Diagnostic Function
          • 4. Diagnostic Trouble Code Chart
          • 5. Symptom Chart
          • 6. Diagnostic Trouble Code Procedures
          • 7. Symptom Procedures
          • 8. Service Data Reference Table
          • 9. Check At Ecu Terminals
            • Notes
            • Terminal Voltage Checks
            • Terminal Resistance And Continuity Checks
          • 10. Inspection Procedures Using An Oscilloscope
        • How To Use The Inspection Procedures
          • Notes
          • Current Trouble
          • Past Trouble
          • Harness Inspection
          • Measures To Take After Replacing The Pcm, ECM Or Ecu
        • Connector Measurement Service Points
          • Notes
          • If Inspecting With The Connector Connected <Waterproof Connectors<
          • If Inspecting With The Connector Connected <Ordinary (Non-Waterproof) Connectors>
          • If Inspecting With The Connector Disconnected <When Inspecting A Female Pin<
        • Connector Inspection Service Points
          • Visual Inspection
          • Connector Pin Inspection
          • Connector Engagement Inspection
        • How To Cope With Intermittent Malfunctions
          • Notes
          • 1. Ask The Customer About The Malfunction
          • 2. Determine The Conditions From The Customer's Responses
          • 3. Use Simulation Test
          • 4. Verify The Intermittent Malfunction Is Eliminated
            • Notes
            • Simulation Tests
        • Inspection Service Points For A Blown Fuse
        • How To Treat Current Trouble
        • How To Treat Past Trouble
      • INTERSYSTEM Affiliated DTC Reference Table
      • Vehicle Identification
        • Models
          • Eclipse (Vehicles For USA)
          • Eclipse SPYDER (Vehicles For USA)
        • Vehicle Identification Code Plate
          • Vehicle Identification Number (VIN)
          • Code Chart
        • Tire And Loading Information Placard
        • Vehicle Safety Certification Label
        • National Safety Mark <Vehicles For CANADA>
        • Engine Model Stamping
        • Theft Protection
          • Theft Protection Label
          • Replacement Parts Stamp
      • Precautions Before Service
        • Supplemental Restraint System (SRS)
        • How To Perform Vehicle Identification Number (VIN) Writing
        • VIN Code Registration Procedure For ECM Or Pcm
          • Notes
          • VIN Code Registration Procedure For ETACS-Ecu
        • Initialization Procedure For Learning Value In MFI Engine
          • Notes
          • Initialization Procedure
        • Learning Procedure For Idling In MFI Engine
          • Purpose
          • Learning Procedure
          • Initialization Procedure For ETV
        • Form-In-Place Gasket (FIPG)
          • Notes
          • Disassembly
          • Gasket Surface Cleaning
          • Application Procedure
        • Servicing Electrical System
        • Vehicle Washing
        • Application Of Anti-Corrosion Agents And Undercoats
        • Scan Tool (M.U.T.-III Sub Assembly)
        • Bolts And Nuts With Stabilizer For Coefficient Of Friction
      • Towing And Hoisting
        • Wrecker Towing Recommendation
        • Front Towing Pickup
        • Rear Towing Pickup
        • Towing When Keys Are Not Available
        • Safety Precautions
        • Lifting, Jacking Support Location
          • Floor Jack
          • Post Type
      • General Data And Specifications
        • <Eclipse >
        • • Notes
          • General Specifications (2.4L Engine)
          • General Specifications (3.8L Engine)
          • Vehicles For MEXICO
      • Tightening Torque
      • Lubrication And Maintenance
        • Notes
        • Maintenance Schedules
        • Severe Service
        • Engine Oil
        • Lubricants And Greases
        • Fuel Usage Statement
        • Gasoline Containing Alcohol
        • Gasoline Containing Methyl Tertiary Butyl Ether (MTBE)
        • Materials Added To Fuel
      • Recommended Lubricants And Lubricant Capacities Table
        • Recommended Lubricants
        • Lubricant Capacity Table
        • Lubricant Selection
          • Engine Oil
          • Oil Viscosity
          • Selection Of Coolant
            • Coolant
      • Scheduled Maintenance Table
        • Scheduled Maintenance Service For Emission Control And Proper Vehicle Performance
        • General Maintenance Service For Proper Vehicle Performance
        • Scheduled Maintenance Under Severe Usage Conditions
      • Maintenance Service
        • 1. Fuel System (Tank, Pipe Line And Connection, And Fuel Tank Filler Tube Cap) (Check For Leaks)
        • 2. Fuel Hoses (Check Condition)
        • 3. Air Cleaner Filter (Replace)
        • 4. Evaporative Emission System (Except Evaporative Emission Canister) (Check For Clogging)
        • 5. Spark Plugs (Replace)
        • 6. Intake And Exhaust Valve Clearance [4G6-MIVEC Engine And 6G7-MIVEC Engine (Intake Side Only)] (Inspect And Adjust)
          • <2.4L Engine>
          • <3.8L Engine>
        • 7. Timing Belt (Replace)
          • Notes
          • <2.4L Engine>
          • <3.8L Engine>
        • 8. Drive Belts (For The Generator And Power Steering Pump) (Check)
          • Drive Belt Tension Check <2.4L Engine>
          • Generator Drive Belt Tension Check <3.8L Engine>
          • <When Using Special Tool MB992080: Recommendation>
          • <When Using The Tension Gauge>
          • <Belt Deflection Check>
          • Generator Drive Belt Tension Adjustment <3.8L Engine>
          • Power Steering Drive Belt Tension Check <3.8L Engine>
          • <When Using A Tension Gauge>
          • Power Steering Drive Belt Tension Adjustment <3.8L Engine>
        • 9. Exhaust System (Connections Portion Of Muffler, Muffler Pipes And Converter Heat Shields) (Check And Service As Required)
        • 10. Engine Oil (Change)
        • 11. Engine Oil Filter (Replace)
          • Notes
          • Engine Oil Filter Selection
          • Oil Filter Replacement
        • 12. Manual Transmission Oil
          • Transmission Oil Level Check
          • Transmission Oil Replacement
        • 13. Transmission Fluid
          • Transmission Fluid Check
          • Transmission Fluid Change
        • 14. Engine Coolant (Change)
          • Notes
          • Changing Coolant
        • 15. Coolant Hoses (Radiator Hose, Heater Hose) (Inspect)
        • 16. Disc Brake Pads, Rotors (Inspect For Wear)
        • 17. Brake Hoses (Check For Deterioration Or Leaks)
        • 18. Ball Joint And Steering Linkage Seals (Inspect For Grease Leaks And Damage)
        • 19. Drive Shaft Boots (Inspect For Grease Leaks And Damage)
        • 20. Suspension System (Inspect For Looseness And Damage)
        • 21. Tires (Rotate)
      • Main Sealant And Adhesive Table
  • Identification
    • CANADIAN Model Cross-Reference
      • * Please Read This First *
      • ACURA
      • ASUNA
      • AUDI
      • BMW
      • CHRYSLER Corp.
        • CHRYSLER
        • Dodge
        • Eagle
        • PLYMOUTH
      • General Motors
        • BUICK
        • CHEVROLET
        • GMC
        • OLDSMOBILE
        • Optima
        • PONTIAC
      • HYUNDAI
      • Jaguar
      • KIA
      • MAZDA
      • MERCEDES-BENZ
      • Mercury
      • MERKUR
      • MITSUBISHI
      • NISSAN
      • RENAULT
      • SATURN
      • Smart
      • SUBARU
      • SUZUKI
      • TOYOTA
      • VOLKSWAGEN
      • VOLVO
      • All Others
  • Metric Conversions
    • Engine Displacement Conversion Table - ECAT
      • Conversion Table
    • Metric Conversions
      • Metric Conversions
        • Notes
        • Length
        • Volume
        • Torque
        • Pressure
      • Conversion Factors
  • OEM General Information
    • Automatic Stop/Start Disable
      • Auto Stop/Start Disable
        • Notes
        • Disable Conditions
        • Disable Button
    • General Information
      • How To Use This Manual
        • Maintenance, Repair And Servicing Explanations
        • On-Vehicle Service
        • Service Procedures
        • Definition Of Terms
          • Standard Value
          • Limit
          • Reference Value
        • Danger, Warning, And Caution
          • Notes
          • Tightening Torque Indication
          • Special Tool Note
          • Abbreviations
      • Troubleshooting Guidelines
        • Verify The Complaint
        • Determine Possible Causes
        • Find The Problem
        • Repair The Problem
        • Verify The Repair
      • How To Use Troubleshooting/Inspection Service Points
        • Troubleshooting Contents
          • Notes
          • 1. Standard Flow Of Diagnostic Troubleshooting
          • 2. System Operation And Symptom Verification Tests
          • 3. Diagnostic Function
          • 4. Diagnostic Trouble Code Chart
          • 5. Symptom Chart
          • 6. Diagnostic Trouble Code Procedures
          • 7. Symptom Procedures
          • 8. Service Data Reference Table
          • 9. Check At Ecu Terminals
            • Notes
            • Terminal Voltage Checks
            • Terminal Resistance And Continuity Checks
          • 10. Inspection Procedures Using An Oscilloscope
        • How To Use The Inspection Procedures
          • Notes
          • Current Trouble
          • Past Trouble
          • Harness Inspection
          • Measures To Take After Replacing The Pcm, ECM Or Ecu
        • Connector Measurement Service Points
          • Notes
          • If Inspecting With The Connector Connected <Waterproof Connectors<
          • If Inspecting With The Connector Connected <Ordinary (Non-Waterproof) Connectors>
          • If Inspecting With The Connector Disconnected <When Inspecting A Female Pin<
        • Connector Inspection Service Points
          • Visual Inspection
          • Connector Pin Inspection
          • Connector Engagement Inspection
        • How To Cope With Intermittent Malfunctions
          • Notes
          • 1. Ask The Customer About The Malfunction
          • 2. Determine The Conditions From The Customer's Responses
          • 3. Use Simulation Test
          • 4. Verify The Intermittent Malfunction Is Eliminated
            • Notes
            • Simulation Tests
        • Inspection Service Points For A Blown Fuse
        • How To Treat Current Trouble
        • How To Treat Past Trouble
      • INTERSYSTEM Affiliated DTC Reference Table
      • Vehicle Identification
        • Models
          • Eclipse (Vehicles For USA)
          • Eclipse SPYDER (Vehicles For USA)
        • Vehicle Identification Code Plate
          • Vehicle Identification Number (VIN)
          • Code Chart
        • Tire And Loading Information Placard
        • Vehicle Safety Certification Label
        • National Safety Mark <Vehicles For CANADA>
        • Engine Model Stamping
        • Theft Protection
          • Theft Protection Label
          • Replacement Parts Stamp
      • Precautions Before Service
        • Supplemental Restraint System (SRS)
        • How To Perform Vehicle Identification Number (VIN) Writing
        • VIN Code Registration Procedure For ECM Or Pcm
          • Notes
          • VIN Code Registration Procedure For ETACS-Ecu
        • Initialization Procedure For Learning Value In MFI Engine
          • Notes
          • Initialization Procedure
        • Learning Procedure For Idling In MFI Engine
          • Purpose
          • Learning Procedure
          • Initialization Procedure For ETV
        • Form-In-Place Gasket (FIPG)
          • Notes
          • Disassembly
          • Gasket Surface Cleaning
          • Application Procedure
        • Servicing Electrical System
        • Vehicle Washing
        • Application Of Anti-Corrosion Agents And Undercoats
        • Scan Tool (M.U.T.-III Sub Assembly)
        • Bolts And Nuts With Stabilizer For Coefficient Of Friction
      • Towing And Hoisting
        • Wrecker Towing Recommendation
        • Front Towing Pickup
        • Rear Towing Pickup
        • Towing When Keys Are Not Available
        • Safety Precautions
        • Lifting, Jacking Support Location
          • Floor Jack
          • Post Type
      • General Data And Specifications
        • <Eclipse >
        • • Notes
          • General Specifications (2.4L Engine)
          • General Specifications (3.8L Engine)
          • Vehicles For MEXICO
      • Tightening Torque
      • Lubrication And Maintenance
        • Notes
        • Maintenance Schedules
        • Severe Service
        • Engine Oil
        • Lubricants And Greases
        • Fuel Usage Statement
        • Gasoline Containing Alcohol
        • Gasoline Containing Methyl Tertiary Butyl Ether (MTBE)
        • Materials Added To Fuel
      • Recommended Lubricants And Lubricant Capacities Table
        • Recommended Lubricants
        • Lubricant Capacity Table
        • Lubricant Selection
          • Engine Oil
          • Oil Viscosity
          • Selection Of Coolant
            • Coolant
      • Scheduled Maintenance Table
        • Scheduled Maintenance Service For Emission Control And Proper Vehicle Performance
        • General Maintenance Service For Proper Vehicle Performance
        • Scheduled Maintenance Under Severe Usage Conditions
      • Maintenance Service
        • 1. Fuel System (Tank, Pipe Line And Connection, And Fuel Tank Filler Tube Cap) (Check For Leaks)
        • 2. Fuel Hoses (Check Condition)
        • 3. Air Cleaner Filter (Replace)
        • 4. Evaporative Emission System (Except Evaporative Emission Canister) (Check For Clogging)
        • 5. Spark Plugs (Replace)
        • 6. Intake And Exhaust Valve Clearance [4G6-MIVEC Engine And 6G7-MIVEC Engine (Intake Side Only)] (Inspect And Adjust)
          • <2.4L Engine>
          • <3.8L Engine>
        • 7. Timing Belt (Replace)
          • Notes
          • <2.4L Engine>
          • <3.8L Engine>
        • 8. Drive Belts (For The Generator And Power Steering Pump) (Check)
          • Drive Belt Tension Check <2.4L Engine>
          • Generator Drive Belt Tension Check <3.8L Engine>
          • <When Using Special Tool MB992080: Recommendation>
          • <When Using The Tension Gauge>
          • <Belt Deflection Check>
          • Generator Drive Belt Tension Adjustment <3.8L Engine>
          • Power Steering Drive Belt Tension Check <3.8L Engine>
          • <When Using A Tension Gauge>
          • Power Steering Drive Belt Tension Adjustment <3.8L Engine>
        • 9. Exhaust System (Connections Portion Of Muffler, Muffler Pipes And Converter Heat Shields) (Check And Service As Required)
        • 10. Engine Oil (Change)
        • 11. Engine Oil Filter (Replace)
          • Notes
          • Engine Oil Filter Selection
          • Oil Filter Replacement
        • 12. Manual Transmission Oil
          • Transmission Oil Level Check
          • Transmission Oil Replacement
        • 13. Transmission Fluid
          • Transmission Fluid Check
          • Transmission Fluid Change
        • 14. Engine Coolant (Change)
          • Notes
          • Changing Coolant
        • 15. Coolant Hoses (Radiator Hose, Heater Hose) (Inspect)
        • 16. Disc Brake Pads, Rotors (Inspect For Wear)
        • 17. Brake Hoses (Check For Deterioration Or Leaks)
        • 18. Ball Joint And Steering Linkage Seals (Inspect For Grease Leaks And Damage)
        • 19. Drive Shaft Boots (Inspect For Grease Leaks And Damage)
        • 20. Suspension System (Inspect For Looseness And Damage)
        • 21. Tires (Rotate)
      • Main Sealant And Adhesive Table
  • Reset Procedures
    • ATEQ TPMS Reset Procedure
      • ATEQ TPMS Reset Procedure
    • BARTEC TPMS Reset Procedure
      • BARTEC TPMS Reset Procedure
    • Maintenance Reminder Light (Reset Procedures)
      • Emissions Maintenance Reminder
        • Notes
        • Emissions Maintenance Reminder Reset Procedure
      • Maintenance Service Reminder
        • Notes
        • Maintenance Service Reminder Reset - Note
        • Maintenance Service Reminder Reset - Procedure 01
          • Notes
          • Service Reminder Reset
          • How To Set The Reminder Schedule
        • Maintenance Service Reminder Reset - Procedure 02
          • Notes
          • Service Reminder Reset
          • How To Set The Reminder Schedule
        • Maintenance Service Reminder Reset - Procedure 03
          • Reset Procedure
          • Setting The Service Reminder Schedule
      • Timing Chain Maintenance Reminder
        • Notes
        • Timing Chain Maintenance Reminder Reset Procedure
          • Description
          • Learned Value Read & Save And Write Learned Value (Changed ECU)
          • Learned Value Reset
          • Test/Limit Value Readout
      • Tire Pressure Monitor System Reminder
        • Notes
        • TPMS Reminder Reset - Procedure 01
        • TPMS Reminder Reset - Procedure 02
        • TPMS Reminder Reset - Procedure 03
          • Notes
          • Sensor Registration
    • Tire Pressure Monitor Systems
      • Description & Operation
        • Notes
        • Tire Pressure Monitor (TPM) System
        • Tire Pressure Monitor Warning Light
      • TPMS Reset Procedures
        • Notes
        • Tire Pressure Sensor Registration
      • Dismounting/Mounting Procedures
        • Notes
        • Tire Pressure Sensor
          • Notes
          • Removal
          • Installation
      • Torque Specifications
  • Specifications Index
    • Common Specs & Procedures
      • Common Specs & Procedures
  • Steering
    • Map - Steering, Suspension, Wheel Alignment, Wheels & Tires
      • Steering & Suspension Systems
        • Notes
        • Map Standards Of Service
        • The Map Process - Overview
        • The Map Process - Overview Of Service Requirements And Suggestions
      • Wheel And Tire
        • Notes
        • Tires
        • Mounting Tires
        • Vehicle Tire Placard
        • Tire Rotation
        • Wheel Lug Nut Torque & Clamping Force
        • Popular Tire Rotation Patterns
        • Wheels And Rims
        • Tire Pressure Monitoring Systems
      • Steering & Suspension CHECKSHEET
      • Wheels & Tires CHECKSHEET
      • Steering And Suspension, Wheel Alignment, Wheels And Tires
        • Notes
        • Active Handling
        • Active Suspension Control Modules
        • Active Variable Ratio Steering
        • Active Yaw Control
        • Adaptive Cruise Control
        • Advance TRAC
        • Air Bags
        • Air Ride Control Modules
        • Air Ride Suspension Torsion Springs (Counter Balancing)
        • Air Ride Suspension
        • Air Ride Tubes
        • Air Shocks And Air Struts
        • Air Spring Valves
        • Air Springs
        • Air Suspension Control Valves
        • Air Suspension DRIERS
        • Axle Acceleration Sensor
        • Ball Joints
        • Body Acceleration Sensor
        • Bushings
        • Center Links
        • Compressors
        • Continuous Damping Control
        • Control Arm Shafts
        • Control Arms
        • Control Modules
        • Distance Regulation Control Module
        • Distance Regulation Sensor
        • Drag Links
        • Dynamic Stability Control
        • Dynamic Stability Traction Control
        • Electronic Ride Control Shocks And Struts
        • Electronic Stability Control
        • Electronic Suspension System
        • Flex Couplers
        • Gaskets
        • Height Sensors
        • Hydraulic Hoses
        • Hydraulic Power Steering Pumps
        • Hydraulic Suspension Hoses
        • Hydraulic Suspension Pumps
        • Idler Arms
        • Intermediate Shaft U-Joints
        • King Pins
        • Modules
        • Pitman Arms
        • Power Steering Belts
        • Power Steering Coolers
        • Power Steering Fluid
        • Power Steering Hoses
        • Power Steering Lines (Steel)
        • Power Steering Pumps - Electric
        • Power Steering Pumps
        • Radar Sensor
        • Radius Arms
        • Relay Rods
        • Relays
        • Sensors
        • Shock Absorbers, Strut Cartridges And Strut Assemblies
        • Spindles
        • Springs, Coil, Leaf And Torsion Bars
        • STABILITRAC
        • Stability Management System
        • Steering Angle Sensor
        • Steering Arms
        • Steering Couplers
        • Steering Dampers
        • Steering Gears (Except Rack And Pinion)
        • Steering Gears, Rack And Pinion
        • Steering Knuckles
        • Strike Out Bumpers
        • Strut Bearing Plate Assemblies
        • Strut Rods
        • Suspension Pumps (Hydraulic)
        • Sway Bar Links
        • Sway Bar Mounting Bushings
        • Sway Bars
        • Switches
        • Tie Rod Ends (Inner And Outer)
        • Tire Pressure Monitoring System
        • Tire Pressure Sensors
        • Tires
        • Torque Sensor
        • Torsion Springs
        • Track Bar Bushings
        • Track Bars
        • Trailing Arm Bushings
        • Trailing Arms
        • Valve Stems
        • Vehicle Dynamics Control
        • Vehicle Speed Sensor
        • Vehicle Stability Assist
        • Vehicle Stability/Skid Control
        • Warning Lamps
        • Wheel Alignment
        • Wheel Attachment Hardware
        • Wheel Bearings, Races And Seals
        • Wheels (Rims)
        • Wiring Harnesses And Connectors
      • Reason Code Explanation
      • Automotive Terminology & Definitions
    • Wheel Alignment Theory & Operation - General Information
      • * Please Read This First *
      • Pre-Alignment Instructions
        • Notes
        • General Alignment Checks
      • Adjustments
        • Notes
        • Camber
        • Caster
        • Toe-In Adjustment
        • Toe-Out On Turns
        • Steering Axis Inclination
  • Towing
    • General Information
      • How To Use This Manual
        • Maintenance, Repair And Servicing Explanations
        • On-Vehicle Service
        • Service Procedures
        • Definition Of Terms
          • Standard Value
          • Limit
          • Reference Value
        • Danger, Warning, And Caution
          • Notes
          • Tightening Torque Indication
          • Special Tool Note
          • Abbreviations
      • Troubleshooting Guidelines
        • Verify The Complaint
        • Determine Possible Causes
        • Find The Problem
        • Repair The Problem
        • Verify The Repair
      • How To Use Troubleshooting/Inspection Service Points
        • Troubleshooting Contents
          • Notes
          • 1. Standard Flow Of Diagnostic Troubleshooting
          • 2. System Operation And Symptom Verification Tests
          • 3. Diagnostic Function
          • 4. Diagnostic Trouble Code Chart
          • 5. Symptom Chart
          • 6. Diagnostic Trouble Code Procedures
          • 7. Symptom Procedures
          • 8. Service Data Reference Table
          • 9. Check At Ecu Terminals
            • Notes
            • Terminal Voltage Checks
            • Terminal Resistance And Continuity Checks
          • 10. Inspection Procedures Using An Oscilloscope
        • How To Use The Inspection Procedures
          • Notes
          • Current Trouble
          • Past Trouble
          • Harness Inspection
          • Measures To Take After Replacing The Pcm, ECM Or Ecu
        • Connector Measurement Service Points
          • Notes
          • If Inspecting With The Connector Connected <Waterproof Connectors<
          • If Inspecting With The Connector Connected <Ordinary (Non-Waterproof) Connectors>
          • If Inspecting With The Connector Disconnected <When Inspecting A Female Pin<
        • Connector Inspection Service Points
          • Visual Inspection
          • Connector Pin Inspection
          • Connector Engagement Inspection
        • How To Cope With Intermittent Malfunctions
          • Notes
          • 1. Ask The Customer About The Malfunction
          • 2. Determine The Conditions From The Customer's Responses
          • 3. Use Simulation Test
          • 4. Verify The Intermittent Malfunction Is Eliminated
            • Notes
            • Simulation Tests
        • Inspection Service Points For A Blown Fuse
        • How To Treat Current Trouble
        • How To Treat Past Trouble
      • INTERSYSTEM Affiliated DTC Reference Table
      • Vehicle Identification
        • Models
          • Eclipse (Vehicles For USA)
          • Eclipse SPYDER (Vehicles For USA)
        • Vehicle Identification Code Plate
          • Vehicle Identification Number (VIN)
          • Code Chart
        • Tire And Loading Information Placard
        • Vehicle Safety Certification Label
        • National Safety Mark <Vehicles For CANADA>
        • Engine Model Stamping
        • Theft Protection
          • Theft Protection Label
          • Replacement Parts Stamp
      • Precautions Before Service
        • Supplemental Restraint System (SRS)
        • How To Perform Vehicle Identification Number (VIN) Writing
        • VIN Code Registration Procedure For ECM Or Pcm
          • Notes
          • VIN Code Registration Procedure For ETACS-Ecu
        • Initialization Procedure For Learning Value In MFI Engine
          • Notes
          • Initialization Procedure
        • Learning Procedure For Idling In MFI Engine
          • Purpose
          • Learning Procedure
          • Initialization Procedure For ETV
        • Form-In-Place Gasket (FIPG)
          • Notes
          • Disassembly
          • Gasket Surface Cleaning
          • Application Procedure
        • Servicing Electrical System
        • Vehicle Washing
        • Application Of Anti-Corrosion Agents And Undercoats
        • Scan Tool (M.U.T.-III Sub Assembly)
        • Bolts And Nuts With Stabilizer For Coefficient Of Friction
      • Towing And Hoisting
        • Wrecker Towing Recommendation
        • Front Towing Pickup
        • Rear Towing Pickup
        • Towing When Keys Are Not Available
        • Safety Precautions
        • Lifting, Jacking Support Location
          • Floor Jack
          • Post Type
      • General Data And Specifications
        • <Eclipse >
        • • Notes
          • General Specifications (2.4L Engine)
          • General Specifications (3.8L Engine)
          • Vehicles For MEXICO
      • Tightening Torque
      • Lubrication And Maintenance
        • Notes
        • Maintenance Schedules
        • Severe Service
        • Engine Oil
        • Lubricants And Greases
        • Fuel Usage Statement
        • Gasoline Containing Alcohol
        • Gasoline Containing Methyl Tertiary Butyl Ether (MTBE)
        • Materials Added To Fuel
      • Recommended Lubricants And Lubricant Capacities Table
        • Recommended Lubricants
        • Lubricant Capacity Table
        • Lubricant Selection
          • Engine Oil
          • Oil Viscosity
          • Selection Of Coolant
            • Coolant
      • Scheduled Maintenance Table
        • Scheduled Maintenance Service For Emission Control And Proper Vehicle Performance
        • General Maintenance Service For Proper Vehicle Performance
        • Scheduled Maintenance Under Severe Usage Conditions
      • Maintenance Service
        • 1. Fuel System (Tank, Pipe Line And Connection, And Fuel Tank Filler Tube Cap) (Check For Leaks)
        • 2. Fuel Hoses (Check Condition)
        • 3. Air Cleaner Filter (Replace)
        • 4. Evaporative Emission System (Except Evaporative Emission Canister) (Check For Clogging)
        • 5. Spark Plugs (Replace)
        • 6. Intake And Exhaust Valve Clearance [4G6-MIVEC Engine And 6G7-MIVEC Engine (Intake Side Only)] (Inspect And Adjust)
          • <2.4L Engine>
          • <3.8L Engine>
        • 7. Timing Belt (Replace)
          • Notes
          • <2.4L Engine>
          • <3.8L Engine>
        • 8. Drive Belts (For The Generator And Power Steering Pump) (Check)
          • Drive Belt Tension Check <2.4L Engine>
          • Generator Drive Belt Tension Check <3.8L Engine>
          • <When Using Special Tool MB992080: Recommendation>
          • <When Using The Tension Gauge>
          • <Belt Deflection Check>
          • Generator Drive Belt Tension Adjustment <3.8L Engine>
          • Power Steering Drive Belt Tension Check <3.8L Engine>
          • <When Using A Tension Gauge>
          • Power Steering Drive Belt Tension Adjustment <3.8L Engine>
        • 9. Exhaust System (Connections Portion Of Muffler, Muffler Pipes And Converter Heat Shields) (Check And Service As Required)
        • 10. Engine Oil (Change)
        • 11. Engine Oil Filter (Replace)
          • Notes
          • Engine Oil Filter Selection
          • Oil Filter Replacement
        • 12. Manual Transmission Oil
          • Transmission Oil Level Check
          • Transmission Oil Replacement
        • 13. Transmission Fluid
          • Transmission Fluid Check
          • Transmission Fluid Change
        • 14. Engine Coolant (Change)
          • Notes
          • Changing Coolant
        • 15. Coolant Hoses (Radiator Hose, Heater Hose) (Inspect)
        • 16. Disc Brake Pads, Rotors (Inspect For Wear)
        • 17. Brake Hoses (Check For Deterioration Or Leaks)
        • 18. Ball Joint And Steering Linkage Seals (Inspect For Grease Leaks And Damage)
        • 19. Drive Shaft Boots (Inspect For Grease Leaks And Damage)
        • 20. Suspension System (Inspect For Looseness And Damage)
        • 21. Tires (Rotate)
      • Main Sealant And Adhesive Table
  • Traction Control Disable Procedures
    • Traction Control Disable
  • Trouble Shooting - Manual Transmission - General Information
    • * Please Read This First *
    • Introduction
• Heating, Ventilation & A/C (HVAC)
  • A/C Compressor
    • Heating, Air Conditioning And Ventilation System
      • General Description
        • Notes
        • Safety Precautions
        • Operation
          • Condenser Fan And Radiator Fan Control
          • Compressor Control
            • Notes
            • A/C Compressor Clutch Relay ON Conditions
      • Service Precautions
        • Caution Labels
      • Manual A/C Diagnosis
        • Introduction To Heater, Air Conditioning And Ventilation Diagnosis
        • Heater, Air Conditioning And Ventilation Diagnostic Troubleshooting Strategy
        • Diagnostic Function
          • How To Connect The Scan Tool (M.U.T.-III)
          • How To Read And Erase Diagnostic Trouble Codes
            • Notes
            • How To Read Data List
          • How To Perform Actuator Test
          • How To Diagnose The Can Bus Line
        • Diagnostic Trouble Code Chart
        • Diagnostic Trouble Code Procedures
          • DTC B1011: Ambient Air Temperature Sensor System (Short Circuit)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1012: Ambient Air Temperature Sensor System (Open Circuit)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1021: Air Thermo Sensor System (Short Circuit)
            • Notes
            • Function
            • Detection logic
            • Probable Causes
            • Diagnosis
          • DTC B1022: Air Thermo Sensor System (Open Circuit)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1041: Air Mixing Damper Control Motor and Potentiometer (Potentiometer system shorted to its power supply)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1042: Air Mixing Damper Control Motor and Potentiometer (Potentiometer system shorted to its ground)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1045: Air Mixing Damper Control Motor and Potentiometer (Activating system failure)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1061: Mode Selection Damper Control Motor and Potentiometer (Potentiometer System Shorted to its Power Supply)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1062: Mode Selection Damper Control Motor and Potentiometer (Potentiometer system shorted to its ground)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1065: Mode Selection Damper Control Motor and Potentiometer (Activating System Failure)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC U1073: Bus Off
            • Notes
            • Trouble Judgment
            • Probable Causes
            • Diagnosis
          • DTC U1100: ECM or PCM Time-out (Related to Engine)
            • Notes
            • Trouble Judgment
            • Probable Causes
            • Diagnosis
          • DTC U1120: Failure Information on ECM or PCM (Related to Engine)
            • Notes
            • Trouble Judgment
            • Troubleshooting Hints
            • Diagnosis
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Malfunction of the A/C-ECU Power Supply System
            • Notes
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 2: Outside/Inside Air Changeover is not possible
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 3: The Compressor does not Work
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 4: Blower Fan and Motor do not Turn
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 5: Blower Air Amount cannot be Changed
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 6: When the A/C is Operating, Temperature Inside the Passenger Compartment does not Decrease (Cool Air is not Emitted)
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 7: The condenser fan and the radiator fan turn at full speed
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 8: The condenser fan and the radiator fan do not operate
            • Diagnosis
          • INSPECTION PROCEDURE 9: Condenser Fan does not Operate
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 10: Rear Window Defogger Function does not Operate
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 11: Rear Window Defogger Timer Function does not Operate
            • Circuit Operation
            • Troubleshooting Hint
            • Diagnosis
          • INSPECTION PROCEDURE 12: The A/C Indicator Flashes.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Data List Reference Table
        • Actuator Test Reference
        • Check At A/C-Ecu Terminal
      • Special Tools
      • On-Vehicle Service
        • Refrigerant Level Test
        • A/C Compressor Clutch Test
        • Simple Inspection Of The A/C Pressure Sensor
        • Compressor Drive Belt Adjustment
        • Charging
          • Notes
          • Method By Using Refrigerant Recovery And Recycling Unit
          • Discharging System
          • Refilling Of Oil In The A/C System
        • Performance Test
          • Test Condition
          • Test Condition Setting
          • Cooling Performance Check
          • Refrigerant Gas Pressure Check
        • Diagnosis By Refrigerant Pressure
          • Notes
          • Compressor Check
        • Refrigerant Leak Repair Procedure
          • Lost Charge
          • Low Charge
          • Handling Tubing And Fittings
        • Compressor Noise Check
          • Notes
          • Adjustment
        • Power Relay Check
          • Blower Relay Continuity Check
          • A/C Compressor Clutch Relay Continuity Check
          • Fan Control Relay Continuity Check
          • Condenser Fan Relay Continuity Check
            • <2.4L Engine>
        • Idle-Up Operation Check
          • <2.4 L Engine>
          • <3.8 L Engine>
      • Heater Control Assembly (Incorporated In A/C-Ecu)
        • Removal And Installation
        • Inspection
          • Blower Switch Continuity Check
      • Heater Unit, Heater Core, Blower Assembly And Evaporator Unit
        • Heater Unit And Front Deck CROSSMEMBER Assembly Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Suction Pipe And Liquid Pipe Disconnection
            • <<B>> Heater Unit And Front Deck CROSSMEMBER Assembly Removal
        • Heater Unit And Blower Assembly Removal And Installation
        • Disassembly And Assembly
        • Inspection
          • Air Mixing Damper Control Motor Check
          • Potentiometer Check
          • Air THERMO Sensor Inspection
        • Blower Assembly Disassembly And Assembly
      • Motors And Transistor
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Mode Selection Damper Control Motor And Potentiometer Installation
        • Inspection
          • Mode Selection Damper Control Motor And Potentiometer Check
          • Potentiometer Check
          • Outside/Inside Air Selection Damper Control Motor Check
          • Blower Fan And Motor Check
          • Resistor Check
      • Ambient Temperature Sensor
        • Removal And Installation
        • Inspection
          • Ambient Air Temperature Sensor Check
      • Compressor Assembly And Tension Pulley
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Flexible Suction Hose And Flexible Discharge Hose Disconnection
            • <<B>> A/C Compressor Removal
          • Installation Service Point
            • >>A<< A/C Compressor Installation
        • Inspection
          • A/C Compressor Clutch Operation Check
          • Cooling Temperature Switch
        • Disassembly And Assembly
          • Notes
          • Disassembly Service Point
            • <<A>> Self-Locking Nut Removal
          • Assembly Service Points
            • >>A<< Field Core Attachment
            • >>B<< Rotor Installation
            • >>C<< Snap Ring Installation
            • >>D<< Self-Locking Nut Installation
            • >>E<< Air Gap Adjustment
      • Condenser And Condenser Fan Motor
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Flexible Discharge Hose And Liquid Pipe A Disconnection
          • Installation Service Point
            • >>A<< Condenser Installation
        • Inspection
          • Condenser Fan Motor Check
      • Refrigerant Line
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Hose/Pipe/Receiver/Expansion Valve Disconnection
            • <<B>> Flexible Suction Hose And Suction Pipe Disconnection
          • Installation Service Point
            • >>A<< Suction Pipe And Flexible Suction Hose Installation
      • Ducts
        • Removal And Installation
      • Ventilators
        • Removal And Installation
      • Specifications
        • Fastener Tightening Specifications
        • General Specifications
        • Service Specifications
        • Lubricants
  • General Servicing
    • Cabin Air Filter (Special Applications) - General Information
      • Cabin Air Filter Applications
    • Heating, Air Conditioning And Ventilation System
      • General Description
        • Notes
        • Safety Precautions
        • Operation
          • Condenser Fan And Radiator Fan Control
          • Compressor Control
            • Notes
            • A/C Compressor Clutch Relay ON Conditions
      • Service Precautions
        • Caution Labels
      • Manual A/C Diagnosis
        • Introduction To Heater, Air Conditioning And Ventilation Diagnosis
        • Heater, Air Conditioning And Ventilation Diagnostic Troubleshooting Strategy
        • Diagnostic Function
          • How To Connect The Scan Tool (M.U.T.-III)
          • How To Read And Erase Diagnostic Trouble Codes
            • Notes
            • How To Read Data List
          • How To Perform Actuator Test
          • How To Diagnose The Can Bus Line
        • Diagnostic Trouble Code Chart
        • Diagnostic Trouble Code Procedures
          • DTC B1011: Ambient Air Temperature Sensor System (Short Circuit)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1012: Ambient Air Temperature Sensor System (Open Circuit)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1021: Air Thermo Sensor System (Short Circuit)
            • Notes
            • Function
            • Detection logic
            • Probable Causes
            • Diagnosis
          • DTC B1022: Air Thermo Sensor System (Open Circuit)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1041: Air Mixing Damper Control Motor and Potentiometer (Potentiometer system shorted to its power supply)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1042: Air Mixing Damper Control Motor and Potentiometer (Potentiometer system shorted to its ground)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1045: Air Mixing Damper Control Motor and Potentiometer (Activating system failure)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1061: Mode Selection Damper Control Motor and Potentiometer (Potentiometer System Shorted to its Power Supply)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1062: Mode Selection Damper Control Motor and Potentiometer (Potentiometer system shorted to its ground)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1065: Mode Selection Damper Control Motor and Potentiometer (Activating System Failure)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC U1073: Bus Off
            • Notes
            • Trouble Judgment
            • Probable Causes
            • Diagnosis
          • DTC U1100: ECM or PCM Time-out (Related to Engine)
            • Notes
            • Trouble Judgment
            • Probable Causes
            • Diagnosis
          • DTC U1120: Failure Information on ECM or PCM (Related to Engine)
            • Notes
            • Trouble Judgment
            • Troubleshooting Hints
            • Diagnosis
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Malfunction of the A/C-ECU Power Supply System
            • Notes
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 2: Outside/Inside Air Changeover is not possible
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 3: The Compressor does not Work
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 4: Blower Fan and Motor do not Turn
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 5: Blower Air Amount cannot be Changed
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 6: When the A/C is Operating, Temperature Inside the Passenger Compartment does not Decrease (Cool Air is not Emitted)
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 7: The condenser fan and the radiator fan turn at full speed
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 8: The condenser fan and the radiator fan do not operate
            • Diagnosis
          • INSPECTION PROCEDURE 9: Condenser Fan does not Operate
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 10: Rear Window Defogger Function does not Operate
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 11: Rear Window Defogger Timer Function does not Operate
            • Circuit Operation
            • Troubleshooting Hint
            • Diagnosis
          • INSPECTION PROCEDURE 12: The A/C Indicator Flashes.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Data List Reference Table
        • Actuator Test Reference
        • Check At A/C-Ecu Terminal
      • Special Tools
      • On-Vehicle Service
        • Refrigerant Level Test
        • A/C Compressor Clutch Test
        • Simple Inspection Of The A/C Pressure Sensor
        • Compressor Drive Belt Adjustment
        • Charging
          • Notes
          • Method By Using Refrigerant Recovery And Recycling Unit
          • Discharging System
          • Refilling Of Oil In The A/C System
        • Performance Test
          • Test Condition
          • Test Condition Setting
          • Cooling Performance Check
          • Refrigerant Gas Pressure Check
        • Diagnosis By Refrigerant Pressure
          • Notes
          • Compressor Check
        • Refrigerant Leak Repair Procedure
          • Lost Charge
          • Low Charge
          • Handling Tubing And Fittings
        • Compressor Noise Check
          • Notes
          • Adjustment
        • Power Relay Check
          • Blower Relay Continuity Check
          • A/C Compressor Clutch Relay Continuity Check
          • Fan Control Relay Continuity Check
          • Condenser Fan Relay Continuity Check
            • <2.4L Engine>
        • Idle-Up Operation Check
          • <2.4 L Engine>
          • <3.8 L Engine>
      • Heater Control Assembly (Incorporated In A/C-Ecu)
        • Removal And Installation
        • Inspection
          • Blower Switch Continuity Check
      • Heater Unit, Heater Core, Blower Assembly And Evaporator Unit
        • Heater Unit And Front Deck CROSSMEMBER Assembly Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Suction Pipe And Liquid Pipe Disconnection
            • <<B>> Heater Unit And Front Deck CROSSMEMBER Assembly Removal
        • Heater Unit And Blower Assembly Removal And Installation
        • Disassembly And Assembly
        • Inspection
          • Air Mixing Damper Control Motor Check
          • Potentiometer Check
          • Air THERMO Sensor Inspection
        • Blower Assembly Disassembly And Assembly
      • Motors And Transistor
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Mode Selection Damper Control Motor And Potentiometer Installation
        • Inspection
          • Mode Selection Damper Control Motor And Potentiometer Check
          • Potentiometer Check
          • Outside/Inside Air Selection Damper Control Motor Check
          • Blower Fan And Motor Check
          • Resistor Check
      • Ambient Temperature Sensor
        • Removal And Installation
        • Inspection
          • Ambient Air Temperature Sensor Check
      • Compressor Assembly And Tension Pulley
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Flexible Suction Hose And Flexible Discharge Hose Disconnection
            • <<B>> A/C Compressor Removal
          • Installation Service Point
            • >>A<< A/C Compressor Installation
        • Inspection
          • A/C Compressor Clutch Operation Check
          • Cooling Temperature Switch
        • Disassembly And Assembly
          • Notes
          • Disassembly Service Point
            • <<A>> Self-Locking Nut Removal
          • Assembly Service Points
            • >>A<< Field Core Attachment
            • >>B<< Rotor Installation
            • >>C<< Snap Ring Installation
            • >>D<< Self-Locking Nut Installation
            • >>E<< Air Gap Adjustment
      • Condenser And Condenser Fan Motor
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Flexible Discharge Hose And Liquid Pipe A Disconnection
          • Installation Service Point
            • >>A<< Condenser Installation
        • Inspection
          • Condenser Fan Motor Check
      • Refrigerant Line
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Hose/Pipe/Receiver/Expansion Valve Disconnection
            • <<B>> Flexible Suction Hose And Suction Pipe Disconnection
          • Installation Service Point
            • >>A<< Suction Pipe And Flexible Suction Hose Installation
      • Ducts
        • Removal And Installation
      • Ventilators
        • Removal And Installation
      • Specifications
        • Fastener Tightening Specifications
        • General Specifications
        • Service Specifications
        • Lubricants
  • HVAC Control Systems
    • Automatic Air Conditioning Diagnosis
      • General Description
        • Notes
        • Safety Precautions
        • Operation
          • Condenser Fan And Radiator Fan Control
          • Compressor Control
      • Automatic A/C Diagnosis
        • Introduction
        • Automatic A/C Troubleshooting Strategy
        • Diagnostic Function
          • How To Connect The Scan Tool (M.U.T.-III)
          • How To Read And Erase Diagnostic Trouble Codes
          • How To Read Data List
          • How To Perform Actuator Test
          • How To Diagnose The Can Bus Line
        • Diagnostic Trouble Code Chart
        • Diagnostic Trouble Code Procedures
          • DTC B1001: Heater Air Intake Duct Sensor System (Short Circuit)
            • Notes
            • Function
            • Detection Logic
            • Diagnosis
          • DTC B1002: Heater Air Intake Duct Sensor System (Open Circuit)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1011: Ambient Air Temperature Sensor System (Short Circuit)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1012: Ambient Air Temperature Sensor System (Open Circuit)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1021: Air Thermo Sensor System (Short Circuit)
            • Notes
            • Function
            • Detection logic
            • Probable Causes
            • Diagnosis
          • DTC B1022: Air Thermo Sensor System (Open Circuit)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1041: Air Mixing Damper Control Motor and Potentiometer (Potentiometer system shorted to its power supply)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1042: Air Mixing Damper Control Motor and Potentiometer (Potentiometer system shorted to its ground)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1045: Air mixing damper control motor and potentiometer (activating system failure)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1061: Mode Selection Damper Control Motor and Potentiometer (Potentiometer system shorted to its power supply)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1062: Mode Selection Damper Control Motor and Potentiometer (Potentiometer system shorted to its ground)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1065: Mode Selection Damper Control Motor and Potentiometer (Activating System Failure)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC U1073: Bus Off
            • Notes
            • Trouble Judgment
            • Probable Causes
            • Diagnosis
          • DTC U1100: ECM or PCM Time-out (Related to Engine)
            • Notes
            • Trouble Judgment
            • Probable Causes
            • Diagnosis
          • DTC U1120: Failure Information on ECM or PCM (Related to Engine)
            • Notes
            • Trouble Judgment
            • Troubleshooting Hints
            • Diagnosis
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Malfunction of the A/C-ECU Power Supply System
            • Notes
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 2: Outside/Inside Air Changeover is not possible
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 3: The Compressor does not Work
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 4: Blower Fan and Motor do not Turn
            • Notes
            • Function
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 5: Blower Fan and Motor does not Stop Turning
            • Notes
            • Function
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 6: When the A/C is Operating, Temperature Inside the Passenger Compartment does not Decrease (Cool Air is not Emitted)
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 7: The condenser fan and the radiator fan turn at full speed
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 8: The condenser fan and the radiator fan do not operate
            • Diagnosis
          • INSPECTION PROCEDURE 9: Rear Window Defogger Function does not Operate
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 10: Rear Window Defogger Timer Function does not Operate
            • Circuit Operation
            • Troubleshooting Hint
            • Diagnosis
          • INSPECTION PROCEDURE 11: The A/C Indicator Flashes
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Data List Reference Table
        • Actuator Test Reference
        • Check At A/C-Ecu Terminal
      • Special Tools
      • Sensors
        • Removal And Installation
        • Inspection
          • Heater Air Intake Duct Sensor Check
      • Other Parts
        • Other Parts Maintenance Service Points
    • Heating, Air Conditioning And Ventilation System
      • General Description
        • Notes
        • Safety Precautions
        • Operation
          • Condenser Fan And Radiator Fan Control
          • Compressor Control
            • Notes
            • A/C Compressor Clutch Relay ON Conditions
      • Service Precautions
        • Caution Labels
      • Manual A/C Diagnosis
        • Introduction To Heater, Air Conditioning And Ventilation Diagnosis
        • Heater, Air Conditioning And Ventilation Diagnostic Troubleshooting Strategy
        • Diagnostic Function
          • How To Connect The Scan Tool (M.U.T.-III)
          • How To Read And Erase Diagnostic Trouble Codes
            • Notes
            • How To Read Data List
          • How To Perform Actuator Test
          • How To Diagnose The Can Bus Line
        • Diagnostic Trouble Code Chart
        • Diagnostic Trouble Code Procedures
          • DTC B1011: Ambient Air Temperature Sensor System (Short Circuit)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1012: Ambient Air Temperature Sensor System (Open Circuit)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1021: Air Thermo Sensor System (Short Circuit)
            • Notes
            • Function
            • Detection logic
            • Probable Causes
            • Diagnosis
          • DTC B1022: Air Thermo Sensor System (Open Circuit)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1041: Air Mixing Damper Control Motor and Potentiometer (Potentiometer system shorted to its power supply)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1042: Air Mixing Damper Control Motor and Potentiometer (Potentiometer system shorted to its ground)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1045: Air Mixing Damper Control Motor and Potentiometer (Activating system failure)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1061: Mode Selection Damper Control Motor and Potentiometer (Potentiometer System Shorted to its Power Supply)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1062: Mode Selection Damper Control Motor and Potentiometer (Potentiometer system shorted to its ground)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC B1065: Mode Selection Damper Control Motor and Potentiometer (Activating System Failure)
            • Notes
            • Function
            • Detection Logic
            • Probable Causes
            • Diagnosis
          • DTC U1073: Bus Off
            • Notes
            • Trouble Judgment
            • Probable Causes
            • Diagnosis
          • DTC U1100: ECM or PCM Time-out (Related to Engine)
            • Notes
            • Trouble Judgment
            • Probable Causes
            • Diagnosis
          • DTC U1120: Failure Information on ECM or PCM (Related to Engine)
            • Notes
            • Trouble Judgment
            • Troubleshooting Hints
            • Diagnosis
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Malfunction of the A/C-ECU Power Supply System
            • Notes
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 2: Outside/Inside Air Changeover is not possible
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 3: The Compressor does not Work
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 4: Blower Fan and Motor do not Turn
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 5: Blower Air Amount cannot be Changed
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 6: When the A/C is Operating, Temperature Inside the Passenger Compartment does not Decrease (Cool Air is not Emitted)
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 7: The condenser fan and the radiator fan turn at full speed
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 8: The condenser fan and the radiator fan do not operate
            • Diagnosis
          • INSPECTION PROCEDURE 9: Condenser Fan does not Operate
            • Notes
            • Function
            • Probable Causes
            • Diagnosis
          • INSPECTION PROCEDURE 10: Rear Window Defogger Function does not Operate
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 11: Rear Window Defogger Timer Function does not Operate
            • Circuit Operation
            • Troubleshooting Hint
            • Diagnosis
          • INSPECTION PROCEDURE 12: The A/C Indicator Flashes.
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Data List Reference Table
        • Actuator Test Reference
        • Check At A/C-Ecu Terminal
      • Special Tools
      • On-Vehicle Service
        • Refrigerant Level Test
        • A/C Compressor Clutch Test
        • Simple Inspection Of The A/C Pressure Sensor
        • Compressor Drive Belt Adjustment
        • Charging
          • Notes
          • Method By Using Refrigerant Recovery And Recycling Unit
          • Discharging System
          • Refilling Of Oil In The A/C System
        • Performance Test
          • Test Condition
          • Test Condition Setting
          • Cooling Performance Check
          • Refrigerant Gas Pressure Check
        • Diagnosis By Refrigerant Pressure
          • Notes
          • Compressor Check
        • Refrigerant Leak Repair Procedure
          • Lost Charge
          • Low Charge
          • Handling Tubing And Fittings
        • Compressor Noise Check
          • Notes
          • Adjustment
        • Power Relay Check
          • Blower Relay Continuity Check
          • A/C Compressor Clutch Relay Continuity Check
          • Fan Control Relay Continuity Check
          • Condenser Fan Relay Continuity Check
            • <2.4L Engine>
        • Idle-Up Operation Check
          • <2.4 L Engine>
          • <3.8 L Engine>
      • Heater Control Assembly (Incorporated In A/C-Ecu)
        • Removal And Installation
        • Inspection
          • Blower Switch Continuity Check
      • Heater Unit, Heater Core, Blower Assembly And Evaporator Unit
        • Heater Unit And Front Deck CROSSMEMBER Assembly Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Suction Pipe And Liquid Pipe Disconnection
            • <<B>> Heater Unit And Front Deck CROSSMEMBER Assembly Removal
        • Heater Unit And Blower Assembly Removal And Installation
        • Disassembly And Assembly
        • Inspection
          • Air Mixing Damper Control Motor Check
          • Potentiometer Check
          • Air THERMO Sensor Inspection
        • Blower Assembly Disassembly And Assembly
      • Motors And Transistor
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Mode Selection Damper Control Motor And Potentiometer Installation
        • Inspection
          • Mode Selection Damper Control Motor And Potentiometer Check
          • Potentiometer Check
          • Outside/Inside Air Selection Damper Control Motor Check
          • Blower Fan And Motor Check
          • Resistor Check
      • Ambient Temperature Sensor
        • Removal And Installation
        • Inspection
          • Ambient Air Temperature Sensor Check
      • Compressor Assembly And Tension Pulley
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Flexible Suction Hose And Flexible Discharge Hose Disconnection
            • <<B>> A/C Compressor Removal
          • Installation Service Point
            • >>A<< A/C Compressor Installation
        • Inspection
          • A/C Compressor Clutch Operation Check
          • Cooling Temperature Switch
        • Disassembly And Assembly
          • Notes
          • Disassembly Service Point
            • <<A>> Self-Locking Nut Removal
          • Assembly Service Points
            • >>A<< Field Core Attachment
            • >>B<< Rotor Installation
            • >>C<< Snap Ring Installation
            • >>D<< Self-Locking Nut Installation
            • >>E<< Air Gap Adjustment
      • Condenser And Condenser Fan Motor
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Flexible Discharge Hose And Liquid Pipe A Disconnection
          • Installation Service Point
            • >>A<< Condenser Installation
        • Inspection
          • Condenser Fan Motor Check
      • Refrigerant Line
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Hose/Pipe/Receiver/Expansion Valve Disconnection
            • <<B>> Flexible Suction Hose And Suction Pipe Disconnection
          • Installation Service Point
            • >>A<< Suction Pipe And Flexible Suction Hose Installation
      • Ducts
        • Removal And Installation
      • Ventilators
        • Removal And Installation
      • Specifications
        • Fastener Tightening Specifications
        • General Specifications
        • Service Specifications
        • Lubricants
• Maintenance
  • Procedures
    • General Information
      • How To Use This Manual
        • Maintenance, Repair And Servicing Explanations
        • On-Vehicle Service
        • Service Procedures
        • Definition Of Terms
          • Standard Value
          • Limit
          • Reference Value
        • Danger, Warning, And Caution
          • Notes
          • Tightening Torque Indication
          • Special Tool Note
          • Abbreviations
      • Troubleshooting Guidelines
        • Verify The Complaint
        • Determine Possible Causes
        • Find The Problem
        • Repair The Problem
        • Verify The Repair
      • How To Use Troubleshooting/Inspection Service Points
        • Troubleshooting Contents
          • Notes
          • 1. Standard Flow Of Diagnostic Troubleshooting
          • 2. System Operation And Symptom Verification Tests
          • 3. Diagnostic Function
          • 4. Diagnostic Trouble Code Chart
          • 5. Symptom Chart
          • 6. Diagnostic Trouble Code Procedures
          • 7. Symptom Procedures
          • 8. Service Data Reference Table
          • 9. Check At Ecu Terminals
            • Notes
            • Terminal Voltage Checks
            • Terminal Resistance And Continuity Checks
          • 10. Inspection Procedures Using An Oscilloscope
        • How To Use The Inspection Procedures
          • Notes
          • Current Trouble
          • Past Trouble
          • Harness Inspection
          • Measures To Take After Replacing The Pcm, ECM Or Ecu
        • Connector Measurement Service Points
          • Notes
          • If Inspecting With The Connector Connected <Waterproof Connectors<
          • If Inspecting With The Connector Connected <Ordinary (Non-Waterproof) Connectors>
          • If Inspecting With The Connector Disconnected <When Inspecting A Female Pin<
        • Connector Inspection Service Points
          • Visual Inspection
          • Connector Pin Inspection
          • Connector Engagement Inspection
        • How To Cope With Intermittent Malfunctions
          • Notes
          • 1. Ask The Customer About The Malfunction
          • 2. Determine The Conditions From The Customer's Responses
          • 3. Use Simulation Test
          • 4. Verify The Intermittent Malfunction Is Eliminated
            • Notes
            • Simulation Tests
        • Inspection Service Points For A Blown Fuse
        • How To Treat Current Trouble
        • How To Treat Past Trouble
      • INTERSYSTEM Affiliated DTC Reference Table
      • Vehicle Identification
        • Models
          • Eclipse (Vehicles For USA)
          • Eclipse SPYDER (Vehicles For USA)
        • Vehicle Identification Code Plate
          • Vehicle Identification Number (VIN)
          • Code Chart
        • Tire And Loading Information Placard
        • Vehicle Safety Certification Label
        • National Safety Mark <Vehicles For CANADA>
        • Engine Model Stamping
        • Theft Protection
          • Theft Protection Label
          • Replacement Parts Stamp
      • Precautions Before Service
        • Supplemental Restraint System (SRS)
        • How To Perform Vehicle Identification Number (VIN) Writing
        • VIN Code Registration Procedure For ECM Or Pcm
          • Notes
          • VIN Code Registration Procedure For ETACS-Ecu
        • Initialization Procedure For Learning Value In MFI Engine
          • Notes
          • Initialization Procedure
        • Learning Procedure For Idling In MFI Engine
          • Purpose
          • Learning Procedure
          • Initialization Procedure For ETV
        • Form-In-Place Gasket (FIPG)
          • Notes
          • Disassembly
          • Gasket Surface Cleaning
          • Application Procedure
        • Servicing Electrical System
        • Vehicle Washing
        • Application Of Anti-Corrosion Agents And Undercoats
        • Scan Tool (M.U.T.-III Sub Assembly)
        • Bolts And Nuts With Stabilizer For Coefficient Of Friction
      • Towing And Hoisting
        • Wrecker Towing Recommendation
        • Front Towing Pickup
        • Rear Towing Pickup
        • Towing When Keys Are Not Available
        • Safety Precautions
        • Lifting, Jacking Support Location
          • Floor Jack
          • Post Type
      • General Data And Specifications
        • <Eclipse >
        • • Notes
          • General Specifications (2.4L Engine)
          • General Specifications (3.8L Engine)
          • Vehicles For MEXICO
      • Tightening Torque
      • Lubrication And Maintenance
        • Notes
        • Maintenance Schedules
        • Severe Service
        • Engine Oil
        • Lubricants And Greases
        • Fuel Usage Statement
        • Gasoline Containing Alcohol
        • Gasoline Containing Methyl Tertiary Butyl Ether (MTBE)
        • Materials Added To Fuel
      • Recommended Lubricants And Lubricant Capacities Table
        • Recommended Lubricants
        • Lubricant Capacity Table
        • Lubricant Selection
          • Engine Oil
          • Oil Viscosity
          • Selection Of Coolant
            • Coolant
      • Scheduled Maintenance Table
        • Scheduled Maintenance Service For Emission Control And Proper Vehicle Performance
        • General Maintenance Service For Proper Vehicle Performance
        • Scheduled Maintenance Under Severe Usage Conditions
      • Maintenance Service
        • 1. Fuel System (Tank, Pipe Line And Connection, And Fuel Tank Filler Tube Cap) (Check For Leaks)
        • 2. Fuel Hoses (Check Condition)
        • 3. Air Cleaner Filter (Replace)
        • 4. Evaporative Emission System (Except Evaporative Emission Canister) (Check For Clogging)
        • 5. Spark Plugs (Replace)
        • 6. Intake And Exhaust Valve Clearance [4G6-MIVEC Engine And 6G7-MIVEC Engine (Intake Side Only)] (Inspect And Adjust)
          • <2.4L Engine>
          • <3.8L Engine>
        • 7. Timing Belt (Replace)
          • Notes
          • <2.4L Engine>
          • <3.8L Engine>
        • 8. Drive Belts (For The Generator And Power Steering Pump) (Check)
          • Drive Belt Tension Check <2.4L Engine>
          • Generator Drive Belt Tension Check <3.8L Engine>
          • <When Using Special Tool MB992080: Recommendation>
          • <When Using The Tension Gauge>
          • <Belt Deflection Check>
          • Generator Drive Belt Tension Adjustment <3.8L Engine>
          • Power Steering Drive Belt Tension Check <3.8L Engine>
          • <When Using A Tension Gauge>
          • Power Steering Drive Belt Tension Adjustment <3.8L Engine>
        • 9. Exhaust System (Connections Portion Of Muffler, Muffler Pipes And Converter Heat Shields) (Check And Service As Required)
        • 10. Engine Oil (Change)
        • 11. Engine Oil Filter (Replace)
          • Notes
          • Engine Oil Filter Selection
          • Oil Filter Replacement
        • 12. Manual Transmission Oil
          • Transmission Oil Level Check
          • Transmission Oil Replacement
        • 13. Transmission Fluid
          • Transmission Fluid Check
          • Transmission Fluid Change
        • 14. Engine Coolant (Change)
          • Notes
          • Changing Coolant
        • 15. Coolant Hoses (Radiator Hose, Heater Hose) (Inspect)
        • 16. Disc Brake Pads, Rotors (Inspect For Wear)
        • 17. Brake Hoses (Check For Deterioration Or Leaks)
        • 18. Ball Joint And Steering Linkage Seals (Inspect For Grease Leaks And Damage)
        • 19. Drive Shaft Boots (Inspect For Grease Leaks And Damage)
        • 20. Suspension System (Inspect For Looseness And Damage)
        • 21. Tires (Rotate)
      • Main Sealant And Adhesive Table
    • Maintenance Reminder Light (Reset Procedures)
      • Emissions Maintenance Reminder
        • Notes
        • Emissions Maintenance Reminder Reset Procedure
      • Maintenance Service Reminder
        • Notes
        • Maintenance Service Reminder Reset - Note
        • Maintenance Service Reminder Reset - Procedure 01
          • Notes
          • Service Reminder Reset
          • How To Set The Reminder Schedule
        • Maintenance Service Reminder Reset - Procedure 02
          • Notes
          • Service Reminder Reset
          • How To Set The Reminder Schedule
        • Maintenance Service Reminder Reset - Procedure 03
          • Reset Procedure
          • Setting The Service Reminder Schedule
      • Timing Chain Maintenance Reminder
        • Notes
        • Timing Chain Maintenance Reminder Reset Procedure
          • Description
          • Learned Value Read & Save And Write Learned Value (Changed ECU)
          • Learned Value Reset
          • Test/Limit Value Readout
      • Tire Pressure Monitor System Reminder
        • Notes
        • TPMS Reminder Reset - Procedure 01
        • TPMS Reminder Reset - Procedure 02
        • TPMS Reminder Reset - Procedure 03
          • Notes
          • Sensor Registration
  • Schedule
    • General Information
      • How To Use This Manual
        • Maintenance, Repair And Servicing Explanations
        • On-Vehicle Service
        • Service Procedures
        • Definition Of Terms
          • Standard Value
          • Limit
          • Reference Value
        • Danger, Warning, And Caution
          • Notes
          • Tightening Torque Indication
          • Special Tool Note
          • Abbreviations
      • Troubleshooting Guidelines
        • Verify The Complaint
        • Determine Possible Causes
        • Find The Problem
        • Repair The Problem
        • Verify The Repair
      • How To Use Troubleshooting/Inspection Service Points
        • Troubleshooting Contents
          • Notes
          • 1. Standard Flow Of Diagnostic Troubleshooting
          • 2. System Operation And Symptom Verification Tests
          • 3. Diagnostic Function
          • 4. Diagnostic Trouble Code Chart
          • 5. Symptom Chart
          • 6. Diagnostic Trouble Code Procedures
          • 7. Symptom Procedures
          • 8. Service Data Reference Table
          • 9. Check At Ecu Terminals
            • Notes
            • Terminal Voltage Checks
            • Terminal Resistance And Continuity Checks
          • 10. Inspection Procedures Using An Oscilloscope
        • How To Use The Inspection Procedures
          • Notes
          • Current Trouble
          • Past Trouble
          • Harness Inspection
          • Measures To Take After Replacing The Pcm, ECM Or Ecu
        • Connector Measurement Service Points
          • Notes
          • If Inspecting With The Connector Connected <Waterproof Connectors<
          • If Inspecting With The Connector Connected <Ordinary (Non-Waterproof) Connectors>
          • If Inspecting With The Connector Disconnected <When Inspecting A Female Pin<
        • Connector Inspection Service Points
          • Visual Inspection
          • Connector Pin Inspection
          • Connector Engagement Inspection
        • How To Cope With Intermittent Malfunctions
          • Notes
          • 1. Ask The Customer About The Malfunction
          • 2. Determine The Conditions From The Customer's Responses
          • 3. Use Simulation Test
          • 4. Verify The Intermittent Malfunction Is Eliminated
            • Notes
            • Simulation Tests
        • Inspection Service Points For A Blown Fuse
        • How To Treat Current Trouble
        • How To Treat Past Trouble
      • INTERSYSTEM Affiliated DTC Reference Table
      • Vehicle Identification
        • Models
          • Eclipse (Vehicles For USA)
          • Eclipse SPYDER (Vehicles For USA)
        • Vehicle Identification Code Plate
          • Vehicle Identification Number (VIN)
          • Code Chart
        • Tire And Loading Information Placard
        • Vehicle Safety Certification Label
        • National Safety Mark <Vehicles For CANADA>
        • Engine Model Stamping
        • Theft Protection
          • Theft Protection Label
          • Replacement Parts Stamp
      • Precautions Before Service
        • Supplemental Restraint System (SRS)
        • How To Perform Vehicle Identification Number (VIN) Writing
        • VIN Code Registration Procedure For ECM Or Pcm
          • Notes
          • VIN Code Registration Procedure For ETACS-Ecu
        • Initialization Procedure For Learning Value In MFI Engine
          • Notes
          • Initialization Procedure
        • Learning Procedure For Idling In MFI Engine
          • Purpose
          • Learning Procedure
          • Initialization Procedure For ETV
        • Form-In-Place Gasket (FIPG)
          • Notes
          • Disassembly
          • Gasket Surface Cleaning
          • Application Procedure
        • Servicing Electrical System
        • Vehicle Washing
        • Application Of Anti-Corrosion Agents And Undercoats
        • Scan Tool (M.U.T.-III Sub Assembly)
        • Bolts And Nuts With Stabilizer For Coefficient Of Friction
      • Towing And Hoisting
        • Wrecker Towing Recommendation
        • Front Towing Pickup
        • Rear Towing Pickup
        • Towing When Keys Are Not Available
        • Safety Precautions
        • Lifting, Jacking Support Location
          • Floor Jack
          • Post Type
      • General Data And Specifications
        • <Eclipse >
        • • Notes
          • General Specifications (2.4L Engine)
          • General Specifications (3.8L Engine)
          • Vehicles For MEXICO
      • Tightening Torque
      • Lubrication And Maintenance
        • Notes
        • Maintenance Schedules
        • Severe Service
        • Engine Oil
        • Lubricants And Greases
        • Fuel Usage Statement
        • Gasoline Containing Alcohol
        • Gasoline Containing Methyl Tertiary Butyl Ether (MTBE)
        • Materials Added To Fuel
      • Recommended Lubricants And Lubricant Capacities Table
        • Recommended Lubricants
        • Lubricant Capacity Table
        • Lubricant Selection
          • Engine Oil
          • Oil Viscosity
          • Selection Of Coolant
            • Coolant
      • Scheduled Maintenance Table
        • Scheduled Maintenance Service For Emission Control And Proper Vehicle Performance
        • General Maintenance Service For Proper Vehicle Performance
        • Scheduled Maintenance Under Severe Usage Conditions
      • Maintenance Service
        • 1. Fuel System (Tank, Pipe Line And Connection, And Fuel Tank Filler Tube Cap) (Check For Leaks)
        • 2. Fuel Hoses (Check Condition)
        • 3. Air Cleaner Filter (Replace)
        • 4. Evaporative Emission System (Except Evaporative Emission Canister) (Check For Clogging)
        • 5. Spark Plugs (Replace)
        • 6. Intake And Exhaust Valve Clearance [4G6-MIVEC Engine And 6G7-MIVEC Engine (Intake Side Only)] (Inspect And Adjust)
          • <2.4L Engine>
          • <3.8L Engine>
        • 7. Timing Belt (Replace)
          • Notes
          • <2.4L Engine>
          • <3.8L Engine>
        • 8. Drive Belts (For The Generator And Power Steering Pump) (Check)
          • Drive Belt Tension Check <2.4L Engine>
          • Generator Drive Belt Tension Check <3.8L Engine>
          • <When Using Special Tool MB992080: Recommendation>
          • <When Using The Tension Gauge>
          • <Belt Deflection Check>
          • Generator Drive Belt Tension Adjustment <3.8L Engine>
          • Power Steering Drive Belt Tension Check <3.8L Engine>
          • <When Using A Tension Gauge>
          • Power Steering Drive Belt Tension Adjustment <3.8L Engine>
        • 9. Exhaust System (Connections Portion Of Muffler, Muffler Pipes And Converter Heat Shields) (Check And Service As Required)
        • 10. Engine Oil (Change)
        • 11. Engine Oil Filter (Replace)
          • Notes
          • Engine Oil Filter Selection
          • Oil Filter Replacement
        • 12. Manual Transmission Oil
          • Transmission Oil Level Check
          • Transmission Oil Replacement
        • 13. Transmission Fluid
          • Transmission Fluid Check
          • Transmission Fluid Change
        • 14. Engine Coolant (Change)
          • Notes
          • Changing Coolant
        • 15. Coolant Hoses (Radiator Hose, Heater Hose) (Inspect)
        • 16. Disc Brake Pads, Rotors (Inspect For Wear)
        • 17. Brake Hoses (Check For Deterioration Or Leaks)
        • 18. Ball Joint And Steering Linkage Seals (Inspect For Grease Leaks And Damage)
        • 19. Drive Shaft Boots (Inspect For Grease Leaks And Damage)
        • 20. Suspension System (Inspect For Looseness And Damage)
        • 21. Tires (Rotate)
      • Main Sealant And Adhesive Table
• Restraints
  • Air Bag, SRS
    • Supplemental Restraint System (SRS)
      • General Description
        • Notes
        • On-Board Diagnostic/Srs Warning Light Function
        • Construction Diagram
        • Warning/Caution Labels
        • Schematic
        • SRS Air Bag Special Connector
        • Squib Circuit Connector Lock Switch
        • Configuration Diagrams
        • Circuit Diagram
        • Component Location
      • Service Precautions
      • SRS Air Bag Diagnosis
        • Introduction To Diagnosis
        • Troubleshooting Strategy
        • Diagnostic Function
          • How To Connect The Scan Tool (M.U.T.-III)
          • How To Read And Erase Diagnostic Trouble Codes
        • SRS Warning Light Check
        • Passenger Seat Belt Warning Light Check
        • Passenger Air Bag Off Indicator Light Check
        • Diagnostic Trouble Code Chart
        • Diagnostic Trouble Code Procedures
          • DTC B1400: Driver's Air Bag Module (1st Squib) System Fault 1 (Short Circuit between Terminals of the Squib Circuit); DTC B1480: Driver's Air Bag Module (2nd Squib) System Fault 1 (Short Circuit between Terminals of the Squib Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1401: Driver's Air Bag Module (1st Squib) System Fault 2 (Open in the Squib Circuit); DTC B1481: Driver's Air Bag Module (2nd Squib) System Fault 2 (Open in the Squib Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC 1402: Driver's Air Bag Module (1st Squib) System Fault for Ground Circuit (Short-circuited to Ground); DTC 1482: Driver's Air Bag Module (2nd Squib) System Fault for Ground Circuit (Short-circuited to Ground)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1403: Driver's Air Bag Module (1st Squib) System Fault for Power Supply Circuit (Short-circuited to Power Supply); DTC B1483: Driver's Air Bag Module (2nd Squib) System Fault for Power Supply Circuit (Short-circuited to Power Supply)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1404: Driver's Air Bag Module (1st Squib Ignition Drive Circuit) System Detected Short Circuit; DTC B1405: Driver's Air Bag Module (1st Squib Ignition Drive Circuit) System Detected Open Circuit; DTC B1414: Passenger's (Front) Air Bag Module (1st Squib Ignition Drive Circuit) System Detected Short Circuit; DTC B1415: Passenger's (Front) Air Bag Module (1st Squib Ignition Drive Circuit) System Detected Open Circuit; DTC B1424: Side-Airbag Module (RH) (Squib) System Detected Short Circuit; DTC B1425: Side-Airbag Module (RH) (Squib) System Detected Open Circuit; DTC B1434: Side-Airbag Module (LH) (Squib) System Fault 3 for Ignition Drive Circuit; DTC B1435: Side-Airbag Module (LH) (Squib) System Fault 4 for Ignition Drive Circuit; DTC B1444: Curtain air bag module (RH) (squib) system detected short circuit; DTC B1445: Curtain air bag module (RH) (squib) system detected open circuit; DTC B1454: Curtain air bag module (LH) (squib) system detected short circuit; DTC B1455: Curtain air bag module (LH) (squib) system detected open circuit; DTC B1464: Seat Belt Pre-tensioner (RH) (Squib Ignition Drive Circuit) System Detected Short Circuit; DTC B1465: Seat Belt Pre-tensioner (RH) (Squib Ignition Drive Circuit) System Detected Open Circuit; DTC B1466: Analog G-Sensor System in the SRS-ECU; DTC B1467: Safing G-Sensor Open Circuit; DTC B1468: Safing G-Sensor Short Circuit; DTC B1469: Safing G-Sensor for Side Air Bag Faults; DTC B1474: Seat Belt Pre-tensioner (LH) (Squib Ignition Drive Circuit) System Detected Short Circuit; DTC B1475: Seat Belt Pre-tensioner (LH) (Squib Ignition Drive Circuit) System Detected Open Circuit; DTC B1478: SRS-ECU Capacitor Circuit Voltage too High; DTC B1479: SRS-ECU Capacitor Circuit Voltage too Low; DTC B1484: Driver's Air Bag Module (2nd Squib Ignition Drive Circuit) System Detected Short Circuit; DTC B1485: Driver's Air Bag Module (2nd Squib Ignition Drive Circuit) System Detected Open Circuit; DTC B1494: Passenger's (Front) Air Bag Module (2nd Squib Ignition Drive Circuit) System Detected Short Circuit; DTC B1495: Passenger's (Front) Air Bag Module (2nd Squib Ignition Drive Circuit) System Detected Open Circuit; DTC B1496: SRS-ECU Non-Volatile Memory (EEPROM); DTC B1497: SRS-ECU Application Specific Integrated Circuit (for frontal activation); DTC B1498: SRS-ECU ROM or RAM; DTC B1552: Changing Circuit Shorted; DTC B1553: Changing Circuit Open; DTC B1554: SG BY-PASS Circuit Malfunction; DTC B1555: SG BY-PASS Circuit (Field Effect Transistor) Open; DTC B1557: SRS-ECU Application Specific Integrated Circuit
            • Notes
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1406: Front Impact Sensor (RH) System for Fault 1; DTC B1416: Front Impact Sensor (LH) System for Fault 1
            • Notes
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1407: Front Impact Sensor (RH) Power Supply Circuit System
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1408: Front Impact Sensor (RH) (Squib) for Power Supply Circuit; DTC B1409: Front Impact Sensor (RH) (Squib) for Communication System
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1410: Passenger's (Front) Air Bag Module (1st Squib) System Fault 1 (Short Circuit between Terminals of the Squib Circuit); DTC B1490: Passenger's (Front) Air Bag Module (2nd Squib) System Fault 1 (Short Circuit between Terminals of the Squib Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1411: Passenger's (Front) Air Bag Module (1st Squib) System Fault 2 (Open in the Squib Circuit); DTC B1491: Passenger's (Front) Air Bag Module (2nd Squib) System Fault 2 (Open in the Squib Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1412: Passenger's (Front) Air Bag Module (1st Squib) System Fault for Ground Circuit (Short-circuited to Ground); DTC B1492: Passenger's (Front) Air Bag Module (2nd Squib) System Fault for Ground Circuit (Short-circuited to Ground)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1413: Passenger's (Front) Air Bag Module (1st Squib) System Fault for Power Supply Circuit (Short-circuited to Power Supply); DTC B1493: Passenger's (Front) Air Bag Module (2nd Squib) System Fault for Power Supply Circuit (Short-circuited to Power Supply)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1417: Front Impact Sensor (LH) Power Supply Circuit System
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1418: Front Impact Sensor (LH) (Squib) for Power Supply Circuit; DTC B1419: Front Impact Sensor (LH) (Squib) for Communication System
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1420: Side-Airbag Module (RH) (Squib) System Fault 1 (Short Circuit between Terminals of the Squib Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1421: Side-Airbag Module (RH) (Squib) System Fault 2 (Open in the Squib Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1422: Side-Airbag Module (RH) (Squib) System Fault Ground Circuit (Short-circuited to Ground)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1423: Side-Airbag Module (RH) (Squib) System Fault Power Supply Circuit (Short-circuited to Power Supply)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1426: Side Impact Sensor (RH) System for Fault 1; DTC B1436: Side Impact Sensor (LH) System for Fault 1
            • Notes
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1427: Side Impact Sensor (RH) Power Supply Circuit System
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1428: Side Impact sensor (RH) (Squib) for Power Supply Circuit; DTC B1429: Side Impact sensor (RH) (Squib) for Communication System
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1430: Side-Airbag Module (LH) (Squib) System Fault 1 (Short Circuit between Terminals of the Squib Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1431: Side-Airbag Module (LH) (Squib) System Fault 2 (Open in the Squib Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1432: Side-Airbag Module (LH) (Squib) System Fault Ground Circuit (Short-circuited to Ground)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1433: Side-Airbag Module (LH) (Squib) System Fault Power Supply Circuit (Short-circuited to Power Supply)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1437: Side Impact Sensor (LH) Power Supply Circuit System
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1438: Side Impact Sensor (LH) (Squib) for Power Supply Circuit; DTC B1439: Side Impact Sensor (LH) (Squib) for Communication System
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1440: Curtain Air Bag Module (RH) (Squib) System Fault 1 (Short Circuit between Terminals of the Squib Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1441: Curtain Air Bag Module (RH) (Squib) System Fault 2 (Open in the Squib Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1442: Curtain Air Bag Module (RH) (Squib) System Fault Ground Circuit (Short-circuited to Ground)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1443: Curtain Air Bag Module (RH) (Squib) System Fault Power Supply Circuit (Short-circuited to Power Supply)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1450: Curtain Air Bag Module (LH) (Squib) System Fault 1 (Short Circuit between Terminals of the Squib Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1451: Curtain Air Bag Module (LH) (Squib) System Fault 2 (Open in the Squib Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1452: Curtain Air Bag Module (LH) (Squib) System Fault Ground Circuit (Short-circuited to Ground)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1453: Curtain Air Bag Module (LH) (squib) System Fault Power Supply Circuit (short-circuited to Power Supply)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1460: Seat Belt Pre-Tensioner (RH) (Squib) System Fault 1 (Short Circuit between Terminals of the Squib Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1461: Seat Belt Pre-Tensioner (RH) (Squib) System Fault 2 (Open in the Squib Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1462: Seat Belt Pre-Tensioner (RH) (Squib) System Fault for Ground Circuit (Short-Circuit to Ground)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1463: Seat Belt Pre-Tensioner (RH) (Squib) System Fault for Power Supply Circuit (Short-circuited to Power Supply)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1470: Seat Belt Pre-Tensioner (LH) (Squib) System Fault 1 (Short Circuit between Terminals of the Squib Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1471: Seat Belt Pre-Tensioner (LH) (Squib) System Fault 2 (Open in the Squib Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1472: Seat Belt Pre-Tensioner (LH) (Squib) System Fault for Ground Circuit (Short-circuited to Ground)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1473: Seat Belt Pre-Tensioner (LH) (Squib) System Fault for Power Supply Circuit (Short-Circuit to Power Supply)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1476: IG1 Power Supply Circuit System (Fuse No. 3 Circuit); DTC B1477: IG1 Power Supply Circuit System (Fuse No. 2 Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1486: Passenger Seat Belt Warning Light Drive Circuit System Fault 2
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1487: Passenger Seat Belt Warning Light Drive Circuit System Fault 1 (Light does not Illuminate)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1487: Passenger Seat Belt Warning Light Drive Circuit System Fault 1 (Light does not Switch Off)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1488: Passenger Air Bag OFF Indicator Light Drive Circuit System Fault 2
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1489: Passenger Air Bag OFF Indicator Light Drive Circuit System Fault 1 (Light does not Illuminate)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1489: Passenger Air Bag OFF Indicator Light Drive Circuit System Fault 1 (Light does not Switch Off)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1499: SRS-ECU Air Bag Condition Monitor Detects Deployed Air Bag
            • Notes
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1506: Seat Slide Sensor System Fault 1 (Open in the Seat Slide Sensor Circuit)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1507: Seat Slide Sensor System Fault Ground Circuit (Short-circuited to Ground)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1508: Seat Slide Sensor System Fault Power Supply Circuit (Short-circuited to Power Supply)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1509: Improper Installation of SRS-ECU
            • Notes
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1519: Connector Lock System Detects Connector Unlocked
            • Notes
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1520: Seat belt switch (LH) malfunction; DTC B1521: Seat belt switch (LH) circuit open (for Normal/Close terminal); DTC B1522: Seat belt switch (LH) circuit (ground side) shorted (for Normal/Close terminal); DTC B1523: Seat belt switch (LH) circuit (power supply side) shorted (for Normal/Close terminal); DTC B1524: Seat belt switch (LH) circuit open (for Normal/Open terminal); DTC B1525: Seat belt switch (LH) circuit (ground side) shorted (for Normal/Open terminal); DTC B1526: Seat belt switch (LH) circuit (power supply side) shorted (for Normal/Open terminal); DTC B1527: Seat belt switch (LH) circuit open (for common terminal); DTC B1528: Seat belt switch (LH) circuit (ground side) shorted (for common terminal); DTC B1529: Seat belt switch (LH) circuit (power supply side) shorted (for common terminal)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1530: Seat belt switch (RH) malfunction; DTC B1531: Seat belt switch (RH) circuit open (for Normal/Close terminal); DTC B1532: Seat belt switch (RH) circuit (ground side) shorted (for Normal/Close terminal); DTC B1533: Seat belt switch (RH) circuit (power supply side) shorted (for Normal/Close terminal); DTC B1534: Seat belt switch (RH) circuit open (for Normal/Open terminal); DTC B1535: Seat belt switch (RH) circuit (ground side) shorted (for Normal/Open terminal); DTC B1536: Seat belt switch (RH) circuit (power supply side) shorted (for Normal/Open terminal); DTC B1537: Seat belt switch (RH) circuit open (for common terminal); DTC B1538: Seat belt switch (RH) circuit (ground side) shorted (for common terminal); DTC B1539: Seat belt switch (RH) circuit (power supply side) shorted (for common terminal)
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1540: Occupant classification-ECU malfunction; DTC B1541: Occupant classification-ECU calibration malfunction; DTC B1542: Occupant classification sensor (S1) malfunction; DTC B1543: Occupant classification sensor (S2) malfunction; DTC B1558: Occupant classification-ECU ID-cord malfunction
            • Notes
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1545: Occupant classification-ECU for Power Supply Circuit; DTC B1546: Occupant classification-ECU for Communication System
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1548: Can Communication Impossible; DTC B1549: Can Communication Error
            • Notes
            • Trouble Judgment
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • DTC B1556: Seat Slide Sensor System for Fault 2 (Malfunction of Seat Slide Sensor)
            • Notes
            • DTC Set Conditions
            • Troubleshooting Hints
            • Diagnosis
          • DTC U1073: Bus Off
            • Notes
            • DTC Set Condition
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Communication between the Scan Tool and the SRS-ECU is not possible
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints (The Most Likely Causes For This Case:)
            • Diagnosis
          • INSPECTION PROCEDURE 2: Power Supply Circuit System
            • Notes
            • Circuit Operation
            • Troubleshooting Hints (The Most Likely Causes For This Case:)
            • Diagnosis
          • INSPECTION PROCEDURE 3: When the Ignition Switch is Turned to the "ON" Position (Engine Stopped), the SRS Warning Light does not Illuminate; INSPECTION PROCEDURE 4: After the Ignition Switch is Turned to the "ON" Position, the SRS Warning Light does not Go off after Approximately Seven Seconds
            • Notes
            • Technical Description (Comment)
            • Troubleshooting Hints (The Most Likely Causes For This Case:)
            • Diagnosis
        • Data List Reference Table
        • Actuator Test Reference Table
        • Fail-Safe Function
        • Accuracy Testing Of Occupant Classification Sensor
      • Special Tools
      • Test Equipment
      • Post-Collision Diagnosis
        • Notes
        • SRS-Ecu Memory Check
        • Repair Procedure
          • When Front Air Bags Deploy In A Collision
          • When Side-Airbags Deploy In A Collision
          • When Air Bags Do Not Deploy In Low-Speed Collision
          • Front Impact Sensor
          • SRS-Ecu
          • Air Bag Modules
          • Front Seatback Assembly (Side-Airbag Module)
          • Clock Spring
          • Side Impact Sensor
          • Curtain Air Bag Module
          • Seat Slide Sensor
          • Occupant Classification Sensor
          • Steering Wheel, Steering Column And Shaft Assembly
          • Seat Belt With Pre-TENSIONER
          • Harness Connector (Front Wiring Harness, Instrument Panel Wiring Harness, And Floor Wiring Harness)
      • Individual Component Service
      • On-Vehicle Service
        • Accuracy Check Of Occupant Classification Sensor
      • Front Impact Sensors
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Negative (-) Battery Cable Disconnection
            • <<B>> Front Impact Sensor <LH> Removal
          • Installation Service Points
            • >>A<< Pre-Installation Inspection
            • >>B<< Front Impact Sensor Installation
            • >>C<< Post-Installation Inspection
        • Inspection
      • SRS Control Unit (SRS-Ecu)
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Negative (-) Battery Cable Disconnection
            • <<B>> SRS-Ecu Removal
          • Installation Service Points
            • >>A<< SRS-Ecu Installation
            • >>B<< Post-Installation Inspection
        • Inspection
      • Air Bag Module(S) And Clock Spring
        • Removal And Installation
          • Notes
          • <Side-Airbag Module>
          • <Driver's Air Bag Module And Clock Spring>
          • <Passenger's (Front) Air Bag Module>
          • Removal Service Points
            • <<A>> Negative (-) Battery Cable Disconnection
            • <<B>> Connector (For Air Bag Module) Removal
            • <<C>> Driver's Air Bag Module Removal
            • <<D>> Steering Wheel Assembly Removal
            • <<E>> Clock Spring Removal
            • <<F>> Passenger's (Front) Air Bag Module Removal
          • Installation Service Points
            • >>A<< Pre-Installation Inspection
            • >>B<< Clock Spring Installation
            • >>C<< Steering Wheel Assembly/Air Bag Module Assembly Installation
            • >>D<< Post-Installation Inspection
        • Inspection
          • Air Bag Module Check
          • Front Seatback Assembly With Side-Airbag Module Check
          • Clock Spring Check
      • Side Impact Sensor
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Negative (-) Battery Cable Disconnection
          • Installation Service Points
            • >>A<< Pre-Installation Inspection
            • >>B<< Side Impact Sensor Installation
            • >>C<< Post-Installation Inspection
        • Inspection
      • Curtain Air Bag Module(S)
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Negative (-) Battery Cable Disconnection
            • <<B>> Curtain Air Bag Module Connector Disconnection
          • Installation Service Points
            • >>A<< Pre-Installation Inspection
            • >>B<< Curtain Air Bag Module Installation
            • >>C<< Curtain Air Bag Module Connector Connection
            • >>D<< Post-Installation Inspection
        • Inspection
          • Curtain Air Bag Module Check
      • Seat Belts With Pre-TENSIONER
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Negative (-) Battery Cable Disconnection
            • <<B>> Pre-TENSIONER Connector Disconnection
          • Installation Service Points
            • >>A<< Pre-Installation Inspection
            • >>B<< Pre-TENSIONER Connector Connection
            • >>C<< Post-Installation Inspection
        • Inspection
          • Seat Belt With Pre-TENSIONER Check
      • Seat Slide Sensor
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Negative (-) Battery Cable Disconnection
          • Installation Service Points
            • >>A<< Pre-Installation Inspection
            • >>B<< Seat Slide Sensor Installation
            • >>C<< Post-Installation Inspection
        • Inspection
      • Occupant Classification Sensor
        • Removal And Installation
        • Inspection
      • Air Bag Module And Seat Belt Pre-TENSIONER Disposal Procedures
        • Notes
        • UNDEPLOYED Air Bag Module Disposal
        • Deployment Inside The Vehicle (When Disposing Of A Vehicle) <Driver's Air Bag Module>
        • Deployment Inside The Vehicle (When Disposing Of A Vehicle) <Passenger's (Front) Air Bag Module>
        • Deployment Inside The Vehicle (When Disposing Of A Vehicle) <Side-Airbag Module>
        • Deployment Inside The Vehicle (When Disposing Of A Vehicle) <Curtain Air Bag Module>
        • Deployment Inside The Vehicle (When Disposing Of A Vehicle) <Seat Belt Pre-TENSIONER>
        • Deployment Outside The Vehicle <Driver's Air Bag Module>
        • Deployment Outside The Vehicle <Passenger's (Front) Air Bag Module>
        • Deployment Outside Vehicle <Side-Airbag Module>
        • Deployment Outside The Vehicle <Curtain Air Bag Module>
        • Deployment Outside The Vehicle <Seat Belt Pre-TENSIONER>
        • Deployed Air Bag Module And Operated Seat Belt Pre-TENSIONER Disposal
      • Specifications
        • Fastener Tightening Specifications
        • Service Specification(S)
          • <Driver's Seat Belt Switch>
          • <Passenger's Seat Belt Switch>
  • Passive Restraints
    • Interior Trim
      • General Description
        • Operation
          • Seat Belt Warning System
          • Rear View System
      • Seat Belt Diagnosis
      • Inside Rear View Mirror Diagnosis
        • Introduction To Inside Rear View Mirror Diagnosis
        • Inside Rear View Mirror Diagnostic Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: The Inside Rear View Mirror can not be Set to Night Mode
            • Notes
            • Function
            • Troubleshooting Hints
            • Diagnosis
      • On-Vehicle Service
        • Auto-Dimming Feature Test
      • Special Tool
      • Instrument Panel Assembly
        • Removal And Installation
        • Clip And Claw Positions
          • Notes
          • Removal Service Point
            • <<A>> Instrument Panel Under Cover Removal
            • <<B>> Connector Disconnection
            • <<C>> Instrument Panel Assembly Removal
        • Glove Box Lock Cylinder Disassembly And Assembly
          • Notes
          • Disassembly Service Point
            • <<A>> Tumbler Disassembly
          • Assembly Service Point
            • >>A<< Tumbler Assembly
        • Disassembly And Assembly
      • Floor Console Assembly
        • Removal And Installation
        • Disassembly And Assembly
          • Notes
          • Removal Service Point
            • <<A>> Accessory Socket (Battery) Case B
      • Trims
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Clip And Claw Position
            • <Eclipse>
            • <Eclipse SPYDER>
          • Removal Service Point
            • <<A>> Front Pillar Trim Removal
      • Door Trim
        • Removal And Installation
          • <Front Door Trim>
          • Removal Service Point
            • <<A>> Inside Handle Cover Removal
        • Disassembly And Assembly
          • <Front Door Trim>
      • Liftgate Trim
        • Removal And Installation
          • <Eclipse>
      • Headlining
        • Removal And Installation
          • <Eclipse>
          • Removal Service Point
            • <<A>> Headlining Assembly Removal
      • Inside Rear View Mirror
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Inside Rear View Mirror Removal
      • Front Seat Assembly
        • Removal And Installation
          • Notes
          • Installation Service Point
            • >>A<< Front Seat Assembly Installation
        • Inspection
          • Heated Seat Switch Check
            • Continuity Test Of Heated Seat Switch
          • Seat Cushion Heater Check
          • Seatback Heater Check
          • Heated Seat Relay Continuity Check
          • Power Seat Switch Continuity Check
          • Operation Check Of Power Seat Motor
        • Disassembly And Assembly
          • <Driver's Seat>
          • <Front Passenger's Seat>
          • Removal Service Points
            • <<A>> Seatback Panel Removal
            • <<B>> Seatback Panel Removal
      • Rear Seat Assembly
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
          • Installation Service Points
            • <<A>> Installation Of Rear Seat Cushion Assembly
            • <<B>> Installation Of Rear Seatback Assembly <Eclipse SPYDER>
        • Disassembly And Assembly
          • <Eclipse>
          • <Eclipse SPYDER>
      • Front Seat Belt
        • Removal And Installation
          • Notes
          • <Eclipse SPYDER>
        • Inspection
          • Seat Belt Switch Continuity Check (Driver's Side)
      • Rear Seat Belt
        • Removal And Installation
          • <Eclipse>
          • <Eclipse SPYDER>
      • Specifications
        • Fastener Tightening Specifications
        • Lubricant
          • <Instrument Panel>
• Steering
  • Manual Steering
    • Power Steering System
      • General Information
      • Power Steering Diagnosis
        • Introduction To Power Steering Diagnosis
        • Power Steering Diagnosis Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Excessive Play of Steering Wheel
            • Diagnosis
          • INSPECTION PROCEDURE 2: Difficult Steering Wheel Operation (Insufficient Power Assist)
            • Diagnosis
          • INSPECTION PROCEDURE 3: Rattling Noise
            • Diagnosis
          • INSPECTION PROCEDURE 4: Shrill Noise
            • Diagnosis
          • INSPECTION PROCEDURE 5: Squealing Noise
            • Diagnosis
          • INSPECTION PROCEDURE 6: Hissing Noise
            • Diagnosis
          • INSPECTION PROCEDURE 7: Droning Noise
            • Diagnosis
          • INSPECTION PROCEDURE 8: Squeaking Noise
            • Diagnosis
          • INSPECTION PROCEDURE 9: Vibration
            • Notes
            • Diagnosis
          • INSPECTION PROCEDURE 10: Oil Leakage from Hose Connection
            • Diagnosis
          • INSPECTION PROCEDURE 11: Oil Leakage from Hose Assembly
            • Diagnosis
          • INSPECTION PROCEDURE 12: Oil Leakage from Oil Reservoir
            • Diagnosis
          • INSPECTION PROCEDURE 13: Oil Leakage from Oil Pump
            • Diagnosis
          • INSPECTION PROCEDURE 14: Oil Leakage from Steering Gear
            • Diagnosis
      • Special Tools
      • On-Vehicle Service
        • Steering Wheel Free Play Check
        • Steering Angle Check
        • Tie Rod End Ball Joint Dust Cover Check
        • Tie Rod End Ball Joint Breakaway Torque Check
        • Stationary Steering Effort Check
        • Steering Wheel Return To Center Check
        • Drive Belt Tension Check
        • Fluid Level Check
        • Fluid Replacement
          • <2.4L Engine>
          • <3.8L Engine>
        • Power Steering System Air Bleeding
          • Notes
          • <2.4L Engine>
          • <3.8L Engine>
        • Oil Pump Pressure Test
        • Power Steering Pressure Switch Check
        • Steering Column Shaft Assembly Shock Absorbing Mechanism Check
          • Notes
          • Inspection Procedure
      • Steering Wheel
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Connector (Driver's Air Bag Module, Horn And Steering Wheel Remote Control Harness) Disconnection
            • <<B>> Steering Wheel Assembly Removal
          • Installation Service Point
            • >>A<< Steering Wheel Assembly/Driver's Air Bag Module Installation
      • Steering Shaft
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Steering Column Assembly Removal
          • Installation Service Point
            • >>A<< Steering Column Assembly Installation
        • Disassembly And Assembly
          • Notes
          • Disassembly Service Point
            • <<A>> Steering Lock Bolt Removal
          • Assembly Service Point
            • >>A<< Steering Lock Cylinder Assembly/Steering Lock Bolt Installation
      • Power Steering Gear Box And Linkage
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Steering Column Shaft Assembly Disconnection
            • <<B>> Tie-Rod End Disconnection
            • <<C>> Front Axle CROSSMEMBER Stay Removal
            • <<D>> Front Axle No. 1 CROSSMEMBER Removal
          • Installation Service Points
            • >>A<< Stabilizer Bar/Stabilizer Bushing/Stabilizer Bar Bracket Installation
            • >>B<< Steering Column Dash Panel Cover/Front Axle No. 1 CROSSMEMBER/Pinch Clamp Installation
            • >>C<< Front Axle CROSSMEMBER Stay Installation
        • Inspection
          • Steering Gear Total Pinion Torque Check
          • Rack
          • Pinion And Valve Assembly
          • Bearing
          • Others
        • Disassembly And Assembly
          • Notes
          • Lubrication And Sealing Points
          • Disassembly Service Points
            • <<A>> Tab Washer Removal
            • <<B>> Tie-Rod Removal
            • <<C>> Jam Nut/Rack Support Cover Removal
            • <<D>> Lower Oil Seal/Pinion And Valve Assembly Removal
            • <<E>> Seal Ring Removal
            • <<F>> Special Bearing/Upper Oil Seal Removal
            • <<G>> CIRCLIP Removal
            • <<H>> Rack Assembly Removal
            • <<I>> Oil Seal Removal
            • <<J>> Lower Ball Bearing Removal
            • <<K>> Needle Roller Bearing Removal
            • <<L>> Oil Seal Removal
            • <<M>> Steering Gear Bushing Removal
          • Assembly Service Points
            • >>A<< Steering Gear Bushing Installation
            • >>B<< Oil Seal Installation
            • >>C<< Needle Roller Bearing/Lower Ball Bearing Installation
            • >>D<< Oil Seal/O-Ring Installation
            • >>E<< Rack Assembly Installation
            • >>F<< Rack Bushing Installation
            • >>G<< CIRCLIP Installation
            • >>H<< Upper Oil Seal/Special Bearing Installation
            • >>I<< Seal Ring Installation
            • >>J<< Lower Oil Seal Installation
            • >>K<< End Plug Installation
            • >>L<< Rack Support Cover/Jam Nut Installation
            • >>M<< Total Pinion Torque Adjustment
            • >>N<< Tab Washer Installation
            • >>O<< Tie-Rod Installation
            • >>P<< Bellows Band Installation
            • >>Q<< Tie-Rod End/Tie-Rod End Jam Nut Installation
      • Power Steering Oil Pump Assembly
        • Removal And Installation <2.4L Engine>
          • Notes
          • Installation Service Point
            • >>A<< Suction Hose Connection
        • Removal And Installation <3.8L Engine>
          • Notes
          • Removal Service Point
            • <<A>> Oil Pump Assembly Removal
          • Installation Service Point
            • >>A<< Suction Hose Connection
        • Inspection
      • Power Steering Hoses
        • Removal And Installation
          • Notes
          • Installation Service Points
            • >>A<< Pressure Tube/Pressure Hose Assembly Installation
            • >>B<< Return Tube Assembly Installation
            • >>C<< Return Hose (R) Installation
            • >>D<< Return Hose (M) Installation
            • >>E<< Suction Hose Installation
      • Specifications
        • General Specifications
        • Service Specifications
        • Lubricants
        • Sealant
  • Power Steering System
    • General Information
    • Power Steering Diagnosis
      • Introduction To Power Steering Diagnosis
      • Power Steering Diagnosis Troubleshooting Strategy
      • Symptom Chart
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: Excessive Play of Steering Wheel
          • Diagnosis
        • INSPECTION PROCEDURE 2: Difficult Steering Wheel Operation (Insufficient Power Assist)
          • Diagnosis
        • INSPECTION PROCEDURE 3: Rattling Noise
          • Diagnosis
        • INSPECTION PROCEDURE 4: Shrill Noise
          • Diagnosis
        • INSPECTION PROCEDURE 5: Squealing Noise
          • Diagnosis
        • INSPECTION PROCEDURE 6: Hissing Noise
          • Diagnosis
        • INSPECTION PROCEDURE 7: Droning Noise
          • Diagnosis
        • INSPECTION PROCEDURE 8: Squeaking Noise
          • Diagnosis
        • INSPECTION PROCEDURE 9: Vibration
          • Notes
          • Diagnosis
        • INSPECTION PROCEDURE 10: Oil Leakage from Hose Connection
          • Diagnosis
        • INSPECTION PROCEDURE 11: Oil Leakage from Hose Assembly
          • Diagnosis
        • INSPECTION PROCEDURE 12: Oil Leakage from Oil Reservoir
          • Diagnosis
        • INSPECTION PROCEDURE 13: Oil Leakage from Oil Pump
          • Diagnosis
        • INSPECTION PROCEDURE 14: Oil Leakage from Steering Gear
          • Diagnosis
    • Special Tools
    • On-Vehicle Service
      • Steering Wheel Free Play Check
      • Steering Angle Check
      • Tie Rod End Ball Joint Dust Cover Check
      • Tie Rod End Ball Joint Breakaway Torque Check
      • Stationary Steering Effort Check
      • Steering Wheel Return To Center Check
      • Drive Belt Tension Check
      • Fluid Level Check
      • Fluid Replacement
        • <2.4L Engine>
        • <3.8L Engine>
      • Power Steering System Air Bleeding
        • Notes
        • <2.4L Engine>
        • <3.8L Engine>
      • Oil Pump Pressure Test
      • Power Steering Pressure Switch Check
      • Steering Column Shaft Assembly Shock Absorbing Mechanism Check
        • Notes
        • Inspection Procedure
    • Steering Wheel
      • Removal And Installation
        • Notes
        • Removal Service Points
          • <<A>> Connector (Driver's Air Bag Module, Horn And Steering Wheel Remote Control Harness) Disconnection
          • <<B>> Steering Wheel Assembly Removal
        • Installation Service Point
          • >>A<< Steering Wheel Assembly/Driver's Air Bag Module Installation
    • Steering Shaft
      • Removal And Installation
        • Notes
        • Removal Service Point
          • <<A>> Steering Column Assembly Removal
        • Installation Service Point
          • >>A<< Steering Column Assembly Installation
      • Disassembly And Assembly
        • Notes
        • Disassembly Service Point
          • <<A>> Steering Lock Bolt Removal
        • Assembly Service Point
          • >>A<< Steering Lock Cylinder Assembly/Steering Lock Bolt Installation
    • Power Steering Gear Box And Linkage
      • Removal And Installation
        • Notes
        • Removal Service Points
          • <<A>> Steering Column Shaft Assembly Disconnection
          • <<B>> Tie-Rod End Disconnection
          • <<C>> Front Axle CROSSMEMBER Stay Removal
          • <<D>> Front Axle No. 1 CROSSMEMBER Removal
        • Installation Service Points
          • >>A<< Stabilizer Bar/Stabilizer Bushing/Stabilizer Bar Bracket Installation
          • >>B<< Steering Column Dash Panel Cover/Front Axle No. 1 CROSSMEMBER/Pinch Clamp Installation
          • >>C<< Front Axle CROSSMEMBER Stay Installation
      • Inspection
        • Steering Gear Total Pinion Torque Check
        • Rack
        • Pinion And Valve Assembly
        • Bearing
        • Others
      • Disassembly And Assembly
        • Notes
        • Lubrication And Sealing Points
        • Disassembly Service Points
          • <<A>> Tab Washer Removal
          • <<B>> Tie-Rod Removal
          • <<C>> Jam Nut/Rack Support Cover Removal
          • <<D>> Lower Oil Seal/Pinion And Valve Assembly Removal
          • <<E>> Seal Ring Removal
          • <<F>> Special Bearing/Upper Oil Seal Removal
          • <<G>> CIRCLIP Removal
          • <<H>> Rack Assembly Removal
          • <<I>> Oil Seal Removal
          • <<J>> Lower Ball Bearing Removal
          • <<K>> Needle Roller Bearing Removal
          • <<L>> Oil Seal Removal
          • <<M>> Steering Gear Bushing Removal
        • Assembly Service Points
          • >>A<< Steering Gear Bushing Installation
          • >>B<< Oil Seal Installation
          • >>C<< Needle Roller Bearing/Lower Ball Bearing Installation
          • >>D<< Oil Seal/O-Ring Installation
          • >>E<< Rack Assembly Installation
          • >>F<< Rack Bushing Installation
          • >>G<< CIRCLIP Installation
          • >>H<< Upper Oil Seal/Special Bearing Installation
          • >>I<< Seal Ring Installation
          • >>J<< Lower Oil Seal Installation
          • >>K<< End Plug Installation
          • >>L<< Rack Support Cover/Jam Nut Installation
          • >>M<< Total Pinion Torque Adjustment
          • >>N<< Tab Washer Installation
          • >>O<< Tie-Rod Installation
          • >>P<< Bellows Band Installation
          • >>Q<< Tie-Rod End/Tie-Rod End Jam Nut Installation
    • Power Steering Oil Pump Assembly
      • Removal And Installation <2.4L Engine>
        • Notes
        • Installation Service Point
          • >>A<< Suction Hose Connection
      • Removal And Installation <3.8L Engine>
        • Notes
        • Removal Service Point
          • <<A>> Oil Pump Assembly Removal
        • Installation Service Point
          • >>A<< Suction Hose Connection
      • Inspection
    • Power Steering Hoses
      • Removal And Installation
        • Notes
        • Installation Service Points
          • >>A<< Pressure Tube/Pressure Hose Assembly Installation
          • >>B<< Return Tube Assembly Installation
          • >>C<< Return Hose (R) Installation
          • >>D<< Return Hose (M) Installation
          • >>E<< Suction Hose Installation
    • Specifications
      • General Specifications
      • Service Specifications
      • Lubricants
      • Sealant
• Suspension
  • Front Suspension
    • Front Suspension & Wheel Alignment
      • General Information
        • Notes
        • Construction Diagram
      • Front Suspension Diagnosis
        • Introduction To Front Suspension Diagnosis
        • Front Suspension Diagnosis Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Steering Wheel is Heavy, Vibrates or Pulls to One Side
            • Diagnosis
          • INSPECTION PROCEDURE 2: Excessive Body Rolling
            • Diagnosis
          • INSPECTION PROCEDURE 3: Poor Ride
            • Diagnosis
          • INSPECTION PROCEDURE 4: Unequal Ride Height
            • Diagnosis
          • INSPECTION PROCEDURE 5: Noise
            • Diagnosis
      • Special Tools
      • On-Vehicle Service
        • Front Wheel Alignment Check And Adjustment
          • Notes
          • Toe-In
          • Camber, Caster And Kingpin Inclination
        • Lower Arm Ball Joint End Play Check
        • Ball Joint Dust Cover Check
          • Lower Arm Ball Joint Dust Cover Check
          • Stabilizer Link Ball Joint Dust Cover Check
      • Strut Assembly
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Stabilizer Link And Strut Connection Nut Removal
          • Installation Service Point
            • >>A<< Stabilizer Link And Strut Connection Nut Installation
        • Inspection
        • Disassembly And Assembly
          • Notes
          • Disassembly Service Points
            • <<A>> Strut Nut (Jam Nut) Removal
            • <<B>> Strut Disposal
          • Assembly Service Points
            • >>A<< Lower Spring Pad Installation
            • >>B<< Strut Insulator Assembly Installation
            • >>C<< Strut Nut (Jam Nut) Installation
      • Lower Arm
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Lower Arm And Knuckle Disconnection
        • Inspection
          • Notes
          • Lower Arm Ball Joint Breakaway Torque Check
          • Lower Arm Ball Joint Dust Cover Check
        • Lower Arm Ball Joint Dust Cover Replacement
        • Lower Arm Bushing (Rear) Replacement
      • Stabilizer Bar
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Steering Column Shaft Assembly Disconnection
            • <<B>> Jam Nut (Connection For Tie-Rod End And Knuckle) Disconnection
            • <<C>> Front Axle CROSSMEMBER Stay Removal
          • Installation Service Points
            • >>A<< Stabilizer Bar/Stabilizer Bushing/Stabilizer Bar Bracket Installation
            • >>B<< Front Axle No. 1 CROSSMEMBER Installation
            • >>C<< Front Axle CROSSMEMBER Stay Installation
        • Inspection
          • Notes
          • Stabilizer Link Ball Joint Breakaway Torque Check
          • Stabilizer Link Ball Joint Dust Cover Check
      • Specifications
        • Fastener Tightening Specifications
        • General Specifications
        • Service Specifications
        • Lubricant
    • Strut Tower Bar
      • Removal And Installation
  • Rear Suspension & Wheel Alignment
    • General Description
      • Notes
      • Construction Diagram
    • Rear Suspension Diagnosis
      • Introduction To Rear Suspension Diagnosis
      • Rear Suspension Diagnostic Troubleshooting Strategy
      • Symptom Chart
      • Symptom Procedures
        • INSPECTION PROCEDURE 1: Squeaks or Other Abnormal Noise
          • Diagnosis
        • INSPECTION PROCEDURE 2: Poor Ride
          • Diagnosis
        • INSPECTION PROCEDURE 3: Body Tilting
          • Diagnosis
    • Special Tools
    • On-Vehicle Service
      • Rear Wheel Alignment Check And Adjustment
        • Notes
        • Camber
        • Toe-In
        • Camber And Toe Reference Table
      • Lower Arm Pillow Ball Bushing End Play Check
      • Toe Control Arm Ball Joint End Play Check
      • Ball Joint Dust Cover Inspection
    • Upper Arm Assembly
      • Removal And Installation
      • Inspection
    • Lower Arm
      • Removal And Installation
        • Notes
        • Removal Service Point
          • <<A>> Lower Arm Bolt Removal
      • Inspection
    • Trailing Arm
      • Removal And Installation
      • Inspection
    • Toe Control Arm
      • Removal And Installation
        • Notes
        • Removal Service Points
          • <<A>> Toe Control Arm Assembly And Knuckle Disconnection
          • <<B>> Assist Link Bolt Removal
      • Inspection
        • Notes
        • Toe Control Arm Ball Joint Turning Torque Check
        • Toe Control Arm Ball Joint Dust Cover Check
      • Toe Control Arm Ball Joint Dust Cover Replacement
    • Shock Absorber Assembly
      • Removal And Installation
      • Inspection
      • Disassembly And Assembly
        • Notes
        • Disassembly Service Point
          • <<A>> Coil Spring Nut (Jam Nut) Removal
        • Assembly Service Points
          • >>A<< Coil Spring Installation
          • >>B<< Shock Absorber Bracket Installation
          • >>C<< Coil Spring Nut (Jam Nut) Installation
        • Shock Absorber Disposal
    • Stabilizer Bar
      • Removal And Installation
      • Inspection
        • Notes
        • Stabilizer Bar Link Ball Joint Breakaway Torque Check
        • Stabilizer Bar Link Ball Joint Dust Cover Check
    • Rear Suspension CROSSMEMBER
      • Removal And Installation
        • Notes
        • Removal Service Points
          • <<A>> Upper Arm Assembly Removal
          • <<B>> Toe Control Arm Assembly Removal
          • <<C>> CROSSMEMBER Stay Removal
          • <<D>> CROSSMEMBER Bracket Removal
        • Installation Service Points
          • >>A<< CROSSMEMBER Stay Installation
          • >>B<< CROSSMEMBER Bracket/CROSSMEMBER Nut Installation
          • >>C<< CROSSMEMBER Stay/CROSSMEMBER Nut Installation
      • Inspection
    • Specifications
      • Fastener Tightening Specifications
      • General Specifications
      • Service Specifications
      • Lubricant
  • Wheel Alignment
    • Front Suspension & Wheel Alignment
      • General Information
        • Notes
        • Construction Diagram
      • Front Suspension Diagnosis
        • Introduction To Front Suspension Diagnosis
        • Front Suspension Diagnosis Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Steering Wheel is Heavy, Vibrates or Pulls to One Side
            • Diagnosis
          • INSPECTION PROCEDURE 2: Excessive Body Rolling
            • Diagnosis
          • INSPECTION PROCEDURE 3: Poor Ride
            • Diagnosis
          • INSPECTION PROCEDURE 4: Unequal Ride Height
            • Diagnosis
          • INSPECTION PROCEDURE 5: Noise
            • Diagnosis
      • Special Tools
      • On-Vehicle Service
        • Front Wheel Alignment Check And Adjustment
          • Notes
          • Toe-In
          • Camber, Caster And Kingpin Inclination
        • Lower Arm Ball Joint End Play Check
        • Ball Joint Dust Cover Check
          • Lower Arm Ball Joint Dust Cover Check
          • Stabilizer Link Ball Joint Dust Cover Check
      • Strut Assembly
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Stabilizer Link And Strut Connection Nut Removal
          • Installation Service Point
            • >>A<< Stabilizer Link And Strut Connection Nut Installation
        • Inspection
        • Disassembly And Assembly
          • Notes
          • Disassembly Service Points
            • <<A>> Strut Nut (Jam Nut) Removal
            • <<B>> Strut Disposal
          • Assembly Service Points
            • >>A<< Lower Spring Pad Installation
            • >>B<< Strut Insulator Assembly Installation
            • >>C<< Strut Nut (Jam Nut) Installation
      • Lower Arm
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Lower Arm And Knuckle Disconnection
        • Inspection
          • Notes
          • Lower Arm Ball Joint Breakaway Torque Check
          • Lower Arm Ball Joint Dust Cover Check
        • Lower Arm Ball Joint Dust Cover Replacement
        • Lower Arm Bushing (Rear) Replacement
      • Stabilizer Bar
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Steering Column Shaft Assembly Disconnection
            • <<B>> Jam Nut (Connection For Tie-Rod End And Knuckle) Disconnection
            • <<C>> Front Axle CROSSMEMBER Stay Removal
          • Installation Service Points
            • >>A<< Stabilizer Bar/Stabilizer Bushing/Stabilizer Bar Bracket Installation
            • >>B<< Front Axle No. 1 CROSSMEMBER Installation
            • >>C<< Front Axle CROSSMEMBER Stay Installation
        • Inspection
          • Notes
          • Stabilizer Link Ball Joint Breakaway Torque Check
          • Stabilizer Link Ball Joint Dust Cover Check
      • Specifications
        • Fastener Tightening Specifications
        • General Specifications
        • Service Specifications
        • Lubricant
    • MITSUBISHI Wheel Alignment Specifications - Eclipse
      • Wheel Alignment Specifications
        • ECLIPSE Coupe
        • ECLIPSE Spyder
    • Rear Suspension & Wheel Alignment
      • General Description
        • Notes
        • Construction Diagram
      • Rear Suspension Diagnosis
        • Introduction To Rear Suspension Diagnosis
        • Rear Suspension Diagnostic Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Squeaks or Other Abnormal Noise
            • Diagnosis
          • INSPECTION PROCEDURE 2: Poor Ride
            • Diagnosis
          • INSPECTION PROCEDURE 3: Body Tilting
            • Diagnosis
      • Special Tools
      • On-Vehicle Service
        • Rear Wheel Alignment Check And Adjustment
          • Notes
          • Camber
          • Toe-In
          • Camber And Toe Reference Table
        • Lower Arm Pillow Ball Bushing End Play Check
        • Toe Control Arm Ball Joint End Play Check
        • Ball Joint Dust Cover Inspection
      • Upper Arm Assembly
        • Removal And Installation
        • Inspection
      • Lower Arm
        • Removal And Installation
          • Notes
          • Removal Service Point
            • <<A>> Lower Arm Bolt Removal
        • Inspection
      • Trailing Arm
        • Removal And Installation
        • Inspection
      • Toe Control Arm
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Toe Control Arm Assembly And Knuckle Disconnection
            • <<B>> Assist Link Bolt Removal
        • Inspection
          • Notes
          • Toe Control Arm Ball Joint Turning Torque Check
          • Toe Control Arm Ball Joint Dust Cover Check
        • Toe Control Arm Ball Joint Dust Cover Replacement
      • Shock Absorber Assembly
        • Removal And Installation
        • Inspection
        • Disassembly And Assembly
          • Notes
          • Disassembly Service Point
            • <<A>> Coil Spring Nut (Jam Nut) Removal
          • Assembly Service Points
            • >>A<< Coil Spring Installation
            • >>B<< Shock Absorber Bracket Installation
            • >>C<< Coil Spring Nut (Jam Nut) Installation
          • Shock Absorber Disposal
      • Stabilizer Bar
        • Removal And Installation
        • Inspection
          • Notes
          • Stabilizer Bar Link Ball Joint Breakaway Torque Check
          • Stabilizer Bar Link Ball Joint Dust Cover Check
      • Rear Suspension CROSSMEMBER
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Upper Arm Assembly Removal
            • <<B>> Toe Control Arm Assembly Removal
            • <<C>> CROSSMEMBER Stay Removal
            • <<D>> CROSSMEMBER Bracket Removal
          • Installation Service Points
            • >>A<< CROSSMEMBER Stay Installation
            • >>B<< CROSSMEMBER Bracket/CROSSMEMBER Nut Installation
            • >>C<< CROSSMEMBER Stay/CROSSMEMBER Nut Installation
        • Inspection
      • Specifications
        • Fastener Tightening Specifications
        • General Specifications
        • Service Specifications
        • Lubricant
  • Wheels & Tire System
    • Wheel & Tire
      • General Description
        • Feature
        • TPMS Construction Diagram
        • TPMS Operational Characteristics
      • General Specification
      • Service Specifications
      • Tire Pressure Monitoring System (TPMS) Service Precautions
      • Wheel And Tire Diagnosis
        • Wheel And Tire Diagnosis
        • Wheel Balance Accuracy
          • Purpose
          • Procedure <Balancing Tips>
          • <Confirming Proper Balance>
          • <Wheel Balancer Calibration Checks>
          • Wheel Balancer Calibration Checking Flow Chart
      • Tire Pressure Monitoring System (TPMS) Diagnosis
        • Introduction To Diagnosis
          • TPMS May Not Work Normally In The Following Circumstances
        • TPMS Troubleshooting Strategy
        • TPMS Diagnostic Function
          • How To Connect The Scan Tool (M.U.T.-III)
          • How To Read And Erase Diagnostic Trouble Codes
          • How To Read Data List
          • How To Perform Actuator Test
        • TPMS Warning Light Check
        • Diagnostic Trouble Code Chart
        • TPMS Diagnostic Trouble Code Procedures
          • DTC C1900: TPMS Abnormality (ID Code Not Registered)
            • TPMS DTC Set Condition
            • Troubleshooting Hint
            • Diagnosis
          • DTC C1608: TPMS Abnormality (EEPROM Failure)
            • TPMS DTC Set Condition
            • Troubleshooting Hint
            • Diagnosis
          • DTC C1901: TPMS Abnormality (Vehicle Speed Signal)
            • Circuit Operation
            • TPMS DTC Set Condition
            • Troubleshooting Hints (The Most Likely Causes For This DTC To Set Are:)
            • Diagnosis
          • DTC C1910: TPMS Transmitter 1 Abnormality (Transmitter Battery Voltage); DTC C1920: TPMS Transmitter 2 Abnormality (Transmitter Battery Voltage); DTC C1930: TPMS Transmitter 3 Abnormality (Transmitter Battery Voltage); DTC C1940: TPMS Transmitter 4 Abnormality (Transmitter Battery Voltage)
            • TPMS DTC Set Condition
            • Troubleshooting Hint
            • Diagnosis
        • Wheel And Tire
          • DTC C1911: TPMS Transmitter 1 Abnormality (Tire Pressure Sensor ID Reception Failure); DTC C1921: TPMS Transmitter 2 Abnormality (Tire Pressure Sensor ID Reception Failure); DTC C1931: TPMS Transmitter 3 Abnormality (Tire Pressure Sensor ID Reception Failure); DTC C1941: TPMS Transmitter 4 Abnormality (Tire Pressure Sensor ID Reception Failure)
            • Circuit Operation
            • TPMS DTC Set Condition
            • Troubleshooting Hints (The Most Likely Causes For This DTC To Set Are:)
            • Diagnosis
          • DTC C1912: TPMS Transmitter 1 Abnormality (Tire Air Pressure Low); DTC C1922: TPMS Transmitter 2 Abnormality (Tire Air Pressure Low); DTC C1932: TPMS Transmitter 3 Abnormality (Tire Air Pressure Low); DTC C1942: TPMS Transmitter 4 Abnormality (Tire Air Pressure Low)
            • TPMS DTC Set Condition
            • Troubleshooting Hints (The Most Likely Causes For This DTC To Set Are:)
            • Diagnosis
        • TPMS Symptom Chart
        • TPMS Symptom Procedures
          • Inspection Procedure 1: The TPMS Warning Light Stays On
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints (The Most Likely Causes For This Case:)
            • Diagnosis
          • Inspection Procedure 2: The TPMS Warning Light Flash for About 1 Minute and Then Remain Illuminated
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints (The Most Likely Causes For This Case:)
            • Diagnosis
          • Inspection Procedure 3: The TPMS Warning Light does not Illuminate as a Bulb Check for Three Seconds when the Ignition Switch is Turned to the "ON" Position
            • Notes
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints (The Most Likely Causes For This Case:)
            • Diagnosis
          • Inspection Procedure 4: In Spite of Abnormally Low Tire Pressure at a Road Wheel, the TPMS Warning Light does not Illuminate
            • System Operation
            • Technical Description (Comment)
            • Troubleshooting Hints (The Most Likely Causes For This Case:)
            • Diagnosis
          • Inspection Procedure 5: Communication between the Scan Tool and the TPMS is not Possible
            • Circuit Operation
            • Technical Description (Comment)
            • Troubleshooting Hints (The Most Likely Causes For This Case:)
            • Diagnosis
        • TPMS Service Data List
        • TPMS Special Function Data List
        • Check At TPMS Receiver
          • Terminal Voltage Check Chart
          • TPMS Receiver Ground Check
      • Special Tools
      • On-Vehicle Service
        • Tire Inflation Pressure Check
        • Tire Wear Check
        • Wheel RUNOUT Check
        • TPMS Special Function
          • Tire Pressure Sensor Id Registration
        • Tire Pressure Sensor Id Check
        • Tire Pressure Sensor Check
      • Wheel And Tire
        • Installation Service Point
        • Wheel And Tire Replacement <TPMS>
      • Tire Pressure Monitoring System (TPMS)
        • TPMS Receiver
          • Removal And Installation
        • TPMS Transmitter
          • Removal And Installation
            • Notes
            • Removal Service Points
              • <<A>> Valve Cap/Valve Nut Removal
              • <<B>> TPMS Transmitter Removal
              • <<C>> Grommet Removal
            • Installation Service Points
              • >>A<< Grommet/TPMS Transmitter/Valve Nut Installation
              • >>B<< Tire Bead Mounting
              • >>C<< Tire Pressure Inflation/Valve Nut RETIGHTENING
• Transmission
  • Automatic Trans
    • Automatic Transaxle Diagnosis & On-Vehicle Service
      • General Description
        • Notes
        • Transaxle
        • Transaxle Configuration Drawing
        • Components And Functions
        • Function Element Table <4A/T>
        • Function Element Table <5A/T>
          • Notes
          • Sectional View <4A/T>
          • Sectional View <5A/T>
        • Electronically-Controlled System
          • INVECS-II
        • Features
          • Optimum Shift Control
        • Adaptive Shift Control
        • System Construction Diagram
          • Notes
          • Shift Pattern Control
            • Upshift Pattern <4A/T>
            • Downshift Pattern <4A/T>
            • Upshift Pattern <5A/T>
            • Downshift Pattern <5A/T>
          • Torque Converter Clutch Control
            • 4TH Gear Range <4A/T>
            • 3RD Gear Range <4A/T>
            • 5TH Gear Range <5A/T>
            • 4TH Gear Range <5A/T>
      • Automatic Transaxle Diagnosis
        • Diagnostic Troubleshooting Flow
        • Introduction To A/T Diagnosis
        • A/T Diagnostic Troubleshooting Strategy
        • Diagnostic Function
          • Check Selector Lever Position Indicator Light
          • On-Board Diagnostics
          • How To Connect The Scan Tool (M.U.T.-III)
          • How To Read And Erase Diagnostic Trouble Codes
          • How To Read Data List
          • How To Perform Actuator Test
          • How To Diagnose The Can Bus Lines
        • How To Initialize A/T Learned Value
          • Aim
          • Initialization Procedure
        • Fail-Safe/Backup Function
        • Road Test
        • Torque Converter Stall Test
          • Notes
          • Torque Converter Stall Test Judgment Results
        • Hydraulic Pressure Tests
          • Notes
          • Standard Hydraulic Pressure Table
          • Hydraulic Pressure Test Diagnosis Table
          • Oil Seal Layout
        • Hydraulic Circuit
          • Parking And Neutral <4A/T>
          • 1ST Gear <4A/T>
          • 2ND Gear <4A/T>
          • 3RD Gear <4A/T>
          • 4TH Gear <4A/T>
          • Reverse Gear <4A/T>
          • Fail-Safe (In Case Of Fail-Safe Valve A Operation) <4A/T>
          • Fail-Safe (In Case Of Fail-Safe Valve B Operation) <4A/T>
          • Parking And Neutral <5A/T>
          • 1ST Gear <5A/T>
          • 2ND Gear <5A/T>
          • 3RD Gear <5A/T>
          • 4TH Gear <5A/T>
          • 5TH Gear <5A/T>
          • Reverse Gear <5A/T>
          • Fail-Safe (In Case Of Fail-Safe Valve A Operation) <5A/T>
          • Fail-Safe (In Case Of Fail-Safe Valve B Operation) <5A/T>
          • Fail-Safe (In Case Of Fail-Safe Valve C Operation) <5A/T>
        • Line Pressure Adjustment
        • Diagnostic Trouble Code Chart
        • Symptom Chart
        • Diagnostic Trouble Code Procedures
          • DTC P1606: EEPROM Malfunction
            • DTC Set Conditions
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
          • DTC P1763 (P0713): Transmission Fluid Temperature Sensor System (Open Circuit)
            • Notes
            • Circuit Operation
            • Descriptions Of Monitor Methods
            • Monitor Execution
            • Monitor Execution Conditions (Other Monitor And Sensor)
            • LOGIC FLOW CHARTS (Monitor Sequence)
            • DTC Set Conditions
              • Check Conditions
              • Judgement Criteria
            • OBD-II Drive Cycle Pattern
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
          • DTC P1764 (P0712): Transmission Fluid Temperature Sensor System (Short Circuit)
            • Transmission Fluid Temperature Sensor System Circuit
            • Circuit Operation
            • Descriptions Of Monitor Methods
            • Monitor Execution
            • Monitor Execution Conditions (Other Monitor And Sensor)
            • LOGIC FLOW CHARTS (Monitor Sequence)
            • DTC Set Conditions
              • Check Conditions, Judgement Criteria
            • OBD-II Drive Cycle Pattern
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
          • DTC P1766 (P0715): Input Shaft Speed Sensor System (Short Circuit/Open Circuit)
            • Notes
            • Circuit Operation
            • Descriptions Of Monitor Methods
            • Monitor Execution
            • Monitor Execution Conditions (Other Monitor And Sensor)
            • LOGIC FLOW CHARTS (Monitor Sequence)
            • DTC Set Conditions
              • Check Conditions
              • Judgment Criteria
            • OBD-II Drive Cycle Pattern
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
          • DTC P1767 (P0720): Output Shaft Speed Sensor System (Short Circuit/Open Circuit)
            • Notes
            • Circuit Operation
            • Descriptions Of Monitor Methods
            • Monitor Execution
            • Monitor Execution Conditions (Other Monitor And Sensor)
            • LOGIC FLOW CHARTS (Monitor Sequence)
            • DTC Set Conditions
              • Check Conditions
              • Judgement Criteria
            • OBD-II Drive Cycle Pattern
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
          • DTC P1769: Stoplight Switch System
            • Notes
            • Circuit Operation
            • DTC Set Conditions
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
          • DTC P1770 (P0705): Transmission Range Switch System (Open Circuit)
            • Notes
            • Circuit Operation
            • Descriptions Of Monitor Methods
            • Monitor Execution
            • Monitor Execution Conditions (Other Monitor And Sensor)
            • LOGIC FLOW CHARTS (Monitor Sequence)
            • DTC Set Conditions
              • Check Conditions, Judgment Criteria
            • OBD-II Drive Cycle Pattern
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
          • DTC P1771 (P0705): Transmission Range Switch System (Short Circuit)
            • Notes
            • Transmission Range Switch System Circuit
            • Circuit Operation
            • Descriptions Of Monitor Methods
            • Monitor Execution
            • Monitor Execution Conditions (Other Monitor And Sensor)
            • LOGIC FLOW CHARTS (Monitor Sequence)
            • DTC Set Conditions
              • Check Conditions, Judgement Criteria
            • OBD-II Drive Cycle Pattern
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
          • DTC P1773 (P0753): Low-Reverse Solenoid Valve
            • Notes
            • Circuit Operation
            • Descriptions Of Monitor Methods
            • Monitor Execution
            • Monitor Execution Conditions (Other Monitor And Sensor)
            • LOGIC FLOW CHARTS (Monitor Sequence)
            • DTC Set Conditions
              • Check Conditions
              • Judgement Criteria
            • OBD-II Drive Cycle Pattern
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
          • DTC P1774 (P0758): Underdrive Solenoid Valve System
            • Solenoid Valve System Circuit
            • Circuit Operation
            • Descriptions Of Monitor Methods
            • Monitor Execution
            • Monitor Execution Conditions (Other Monitor And Sensor)
            • LOGIC FLOW CHARTS (Monitor Sequence)
            • DTC Set Conditions
              • Check Conditions
              • Judgement Criteria
            • OBD-II Drive Cycle Pattern
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
          • DTC P1775 (P0763): Second Solenoid Valve System
            • Solenoid Valve System Circuit
            • Circuit Operation
            • Descriptions Of Monitor Methods
            • Monitor Execution
            • Monitor Execution Conditions (Other Monitor And Sensor)
            • LOGIC FLOW CHARTS (Monitor Sequence)
            • DTC Set Conditions
              • Check Conditions
              • Judgement Criteria
            • OBD-II Drive Cycle Pattern
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
          • DTC P1776 (P0768): Overdrive Solenoid Valve System
            • Solenoid Valve System Circuit
            • Circuit Operation
            • Descriptions Of Monitor Methods
            • Monitor Execution
            • Monitor Execution Conditions (Other Monitor And Sensor)
            • LOGIC FLOW CHARTS (Monitor Sequence)
            • DTC Set Conditions
              • Check Conditions
              • Judgement Criteria
            • OBD-II Drive Cycle Pattern
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
          • DTC P1777 (P0773): Reduction solenoid valve system <5A/T>
            • Solenoid Valve System Circuit
            • Circuit Operation
            • Descriptions Of Monitor Methods
            • Monitor Execution
            • Monitor Execution Conditions (Other Monitor And Sensor)
            • LOGIC FLOW CHARTS (Monitor Sequence)
            • DTC Set Conditions
              • Check Conditions
              • Judgement Criteria
            • OBD-II Drive Cycle Pattern
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
          • DTC P1778 (P0743): Torque Converter Clutch Solenoid Valve System
            • Solenoid Valve System Circuit
            • Circuit Operation
            • Descriptions Of Monitor Methods
            • Monitor Execution
            • Monitor Execution Conditions (Other Monitor And Sensor)
            • LOGIC FLOW CHARTS (Monitor Sequence)
            • DTC Set Conditions
              • Check Conditions
              • Judgement Criteria
            • OBD-II Drive Cycle Pattern
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
          • DTC P1779 (P0731): 1st Gear Incorrect Ratio; DTC P1780 (P0732): 2nd Gear Incorrect Ratio; DTC P1781 (P0733): 3rd Gear Incorrect Ratio; DTC P1782 (P0734): 4th Gear Incorrect Ratio; DTC P1783 (P0735): 5th Gear Incorrect Ratio <5A/T>; DTC P1784 (P0736): Reverse Gear Incorrect Ratio
            • Circuit Operation
            • Descriptions Of Monitor Methods <DTC P1779 (P0731)>
            • Monitor Execution <DTC P1779 (P0731)>
            • Monitor Execution Conditions (Other Monitor And Sensor) <DTC P1779 (P0731)>
            • LOGIC FLOW CHARTS (Monitor Sequence) <DTC P1779 (P0731)>
            • DTC Set Conditions
              • Check Conditions
              • Judgement Criteria
            • OBD-II Drive Cycle Pattern <DTC P1779 (P0731)>
            • Descriptions Of Monitor Methods <DTC P1780 (P0732)>
            • Monitor Execution <DTC P1780 (P0732)>
            • Monitor Execution Conditions (Other Monitor And Sensor) <DTC P1780 (P0732)>
            • LOGIC FLOW CHARTS (Monitor Sequence) <DTC P1780 (P0732)>
            • DTC Set Conditions
              • Check Conditions
              • Judgement Criteria
            • OBD-II Drive Cycle Pattern <DTC P1780 (P0732)>
            • Descriptions Of Monitor Methods <DTC P1781 (P0733)>
            • Monitor Execution <DTC P1781 (P0733)>
            • Monitor Execution Conditions (Other Monitor And Sensor) <DTC P1781 (P0733)>
            • LOGIC FLOW CHARTS (Monitor Sequence) <DTC P1781 (P0733)>
            • DTC Set Conditions
              • Check Conditions
              • Judgement Criteria
            • OBD-II Drive Cycle Pattern <DTC P1781 (P0733)>
            • Descriptions Of Monitor Methods <DTC P1782 (P0734)>
            • Monitor Execution <DTC P1782 (P0734)>
            • Monitor Execution Conditions (Other Monitor And Sensor) <DTC P1782 (P0734)>
            • LOGIC FLOW CHARTS (Monitor Sequence) <DTC P1782 (P0734)>
            • DTC Set Conditions
              • Check Conditions
              • Judgement Criteria
            • OBD-II Drive Cycle Pattern <DTC P1782 (P0734)>
            • Descriptions Of Monitor Methods <DTC P1783 (P0735)> <5A/T>
            • Monitor Execution <DTC P1783 (P0735)> <5A/T>
            • Monitor Execution Conditions (Other Monitor And Sensor) <DTC P1783 (P0735)> <5A/T>
            • LOGIC FLOW CHARTS (Monitor Sequence) <DTC P1783 (P0735)> <5A/T>
            • DTC Set Conditions <5A/T>
              • Check Conditions
              • Judgement Criteria
            • OBD-II Drive Cycle Pattern <DTC P1783 (P0735)> <5A/T>
            • Descriptions Of Monitor Methods <DTC P1784 (P0736)>
            • Monitor Execution <DTC P1784 (P0736)>
            • Monitor Execution Conditions (Other Monitor And Sensor) <DTC P1784 (P0736)>
            • LOGIC FLOW CHARTS (Monitor Sequence) <DTC P1784 (P0736)>
            • DTC Set Conditions
              • Check Conditions
              • Judgement Criteria
            • OBD-II Drive Cycle Pattern <DTC P1784 (P0736)>
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
          • DTC P1786 (P0741): Torque Converter Clutch System (Stuck Off)
            • Descriptions Of Monitor Methods
            • Monitor Execution
            • Monitor Execution Conditions (Other Monitor And Sensor)
            • LOGIC FLOW CHARTS (Monitor Sequence)
            • DTC Set Conditions
              • Check Conditions
              • Judgement Criteria
            • OBD-II Drive Cycle Pattern
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
          • DTC P1787 (P0742): Torque Converter Clutch System (Stuck On)
            • Descriptions Of Monitor Methods
            • Monitor Execution
            • Monitor Execution Conditions (Other Monitor And Sensor)
            • LOGIC FLOW CHARTS (Monitor Sequence)
            • DTC Set Conditions
              • Check Conditions
              • Judgement Criteria
            • OBD-II Drive Cycle Pattern
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
          • DTC P1788 (P1751): A/T Control Relay System
            • Notes
            • Circuit Operation
            • Descriptions Of Monitor Methods
            • Monitor Execution
            • Monitor Execution Conditions (Other Monitor And Sensor)
            • LOGIC FLOW CHARTS (Monitor Sequence)
            • DTC Set Conditions
              • Check Conditions
              • Judgement Criteria
            • OBD-II Drive Cycle Pattern
            • Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
            • Diagnosis
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Engine does not Start
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Condition:)
            • Diagnosis
          • INSPECTION PROCEDURE 2: Does not Move Forward
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Condition:)
            • Diagnosis
          • INSPECTION PROCEDURE 3: Does not Move Backward
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Condition:)
            • Diagnosis
          • INSPECTION PROCEDURE 4: Does not Move (Forward or Backward)
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Condition:)
            • Diagnosis
          • INSPECTION PROCEDURE 5: Engine Stalls when Moving Selector Lever from "N" to "D" or "N" to "R"
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Condition:)
            • Diagnosis
          • INSPECTION PROCEDURE 6: Shift Shock when Shifting from "N" to "D" and Long Delay
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Condition:)
            • Diagnosis
          • INSPECTION PROCEDURE 7: Shift Shock when Shifting from "N" to "R" and Long Delay
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Condition:)
            • Diagnosis
          • INSPECTION PROCEDURE 8: Shift Shock when Shifting from "N" to "D," "N" to "R" and Long Delay
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Condition:)
            • Diagnosis
          • INSPECTION PROCEDURE 9: Shift Shock and Slipping
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Condition:)
            • Diagnosis
          • INSPECTION PROCEDURE 10: Early or Late Shifting in All Gears
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Condition:)
            • Diagnosis
          • INSPECTION PROCEDURE 11: Early or Late Shifting in Some Gears
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Condition:)
            • Diagnosis
          • INSPECTION PROCEDURE 12: No Diagnostic Trouble Codes (Does not Shift)
            • Notes
            • Circuit Operation
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Condition:)
            • Diagnosis
          • INSPECTION PROCEDURE 13: Poor Acceleration
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Condition:)
            • Diagnosis
          • INSPECTION PROCEDURE 14: Vibration
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Condition:)
            • Diagnosis
          • INSPECTION PROCEDURE 15: Shift Switch Assembly System
            • Notes
            • Circuit Operation
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Case:)
            • Diagnosis
          • INSPECTION PROCEDURE 16: Selector Lever Position Indicator Light System
            • Operation
            • Comment
            • Troubleshooting Hints (The Most Likely Causes For This Condition:)
            • Diagnosis
        • Data List Reference Table
        • Actuator Test Reference Table
        • INVECS-II Cancel Command (Special Function)
        • Pcm Terminal Voltage Reference Chart For Transaxle Operation
        • Pcm Terminal Resistance And Continuity Inspection Chart
        • Inspection Procedure Using An Oscilloscope
      • Diagnosis
        • Introduction To A/T Key Interlock And Shift Lock Mechanisms
        • A/T Key Interlock And Shift Lock Mechanisms Diagnostic Troubleshooting Strategy
        • Symptom Chart
        • Symptom Procedures
          • INSPECTION PROCEDURE 1: Selector Lever can be Moved from "P" to "R" Position without Depressing Brake Pedal when Ignition Key is at any Position Other than "LOCK" (OFF) Position
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 2: Selector Lever cannot be Moved from "P" to "R" Position with Brake Pedal Depressed when Ignition Key is at any Position Other than "LOCK" (OFF) Position
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 3: Selector Lever can be Moved from "P" to "R" Position with Brake Pedal Depressed when Ignition Key is at "LOCK" (OFF) Position
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 4: Selector Lever cannot be Moved from "P" to "R" Position Smoothly
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 5: Selector Lever cannot be Moved from "R" to "P" Position
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 6: Ignition Key cannot be Turned to the "LOCK" (OFF) Position when Selector Lever is at "P" Position
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
          • INSPECTION PROCEDURE 7: Ignition Key can be Turned to the "LOCK" (OFF) Position when Selector Lever is at any Position Other than "P" Position
            • Technical Description (Comment)
            • Troubleshooting Hints
            • Diagnosis
      • Special Tools
      • On-Vehicle Service
        • A/T Control Component Layout
        • Essential Service
          • Transmission Fluid Check
          • Transmission Fluid Change
        • Flushing Coolers And Tubes
        • Oil Cooler Flow Check
        • Transmission Range Switch Check
        • Transmission Range Switch And Control Cable Adjustment
        • Automatic Transaxle Control Component Check
          • Crankshaft Position Sensor Check
          • Transmission Fluid Temperature Sensor Check
        • Stoplight Switch Check
        • A/T Control Relay Check
        • Solenoid Valve Check
        • Selector Lever Operation Check
        • Key Interlock And Shift Lock Mechanism Check
      • Transaxle Control
        • Removal And Installation
          • Notes
          • Installation Service Points
            • >>A<< Shift Lock Cable Unit Installation
            • >>B<< Transaxle Control Cable Assembly (Transaxle Side)/Adjusting Nut Installation
        • Inspection
      • A/T Key Interlock And Shift Lock Mechanisms
        • Removal And Installation
          • Notes
          • Removal Service Points
            • <<A>> Shift Lock Cable Unit Removal
          • Installation Service Points
            • >>A<< Shift Lock Cable Unit Installation
            • >>B<< Shift Lock Cable Unit (Brake Pedal Side) Installation
        • Inspection
      • Transaxle Assembly
        • Removal And Installation
          • <4A/T>
          • Removal Service Points
            • <<A>> Drive Shaft Nut Removal
            • <<B>> Tie Rod End Connection/Lower Arm Ball Joint Connection Removal
            • <<C>> Drive Shaft Removal
            • <<D>> Torque Converter And Drive Plate Coupling Bolts Removal
            • <<E>> Engine Assembly Supporting
            • <<C>> Drive Shaft <LH>/Drive Shaft And Inner Shaft Assembly <RH> Removal
          • Installation Service Point
            • >>A<< Transaxle Assembly Installation
            • >>B<< Transaxle Mounting Stopper Installation
            • >>C<< Drive Shaft Installation
            • >>D<< Drive Shaft Nut Installation
            • >>E<< Transaxle Control Cable/Adjusting Nut Installation
            • >>C<< Drive Shaft And Inner Shaft Assembly <RH>/Drive Shaft <LH> Installation
          • <5A/T>
      • Transmission Fluid Cooler, Hose And Pipe
        • Removal And Installation
          • <4A/T>
          • Removal Service Points
            • <<A>> Transmission Fluid Cooler Return Hose/Transmission Fluid Cooler Feed Hose/Water Cooler Feed Hose/Water Cooler Return Hose/ATF Warmer (Transmission Fluid Cooler) Removal
            • <<A>> Transmission Fluid Cooler Line Hose A, B, C/Transmission Fluid Cooler Line Tube/Transmission Fluid Cooler Removal
          • <5A/T>
      • Specifications
        • Fastener Tightening Specifications
        • Service Specifications
        • Lubricant
    • Automatic Transaxle Overhaul - F4A4B
      • General Description
        • Notes
        • Sectional View
        • Hydraulic Circuit
      • Special Tools
      • Transaxle
        • Disassembly And Assembly
          • Notes
          • Disassembly
          • Assembly
        • Adjustment Of Transaxle
          • Thrust Washer Selection For Adjustment Of Input Shaft End Play
            • <Measurement using a Solder>
            • <Measurement using Plastigage>
          • Spacer Selection For Adjustment Of Differential Case Preload
            • <Measurement using a Solder>
            • <Measurement using Plastigage>
      • Oil Pump
        • Disassembly And Assembly
          • Notes
          • Assembly Service Points
            • >>A<< Oil Seal Installation
            • >>B<< O-Ring Installation
      • UNDERDRIVE Clutch And Input Shaft
        • Disassembly And Assembly
          • Notes
          • Disassembly Service Point
            • <<A>> Snap Ring Removal
          • Assembly Service Points
            • >>A<< D-Ring Installation
            • >>B<< Snap Ring Installation
            • >>C<< Clutch Plate/Clutch Disc/Clutch Reaction Plate Installation
            • >>D<< Snap Ring Installation
      • Reverse And Overdrive Clutch
        • Disassembly And Assembly
          • Number Of Clutch Discs And Plates
          • Disassembly Service Point
            • <<A>> Snap Ring Removal
          • Assembly Service Points
            • >>A<< D-Ring Installation
            • >>B<< Reverse Clutch Piston Installation
            • >>C<< Snap Ring Installation
            • >>D<< Pressure Plate/Clutch Plate/Clutch Disc/Clutch Reaction Plate Installation
            • >>E<< Snap Ring Installation
            • >>F<< Clutch Plate/Clutch Disc/Clutch Reaction Plate Installation
            • >>G<< Snap Ring Installation
      • Planetary Gear
        • Disassembly And Assembly
          • Notes
          • Assembly Service Points
            • >>A<< Thrust Bearing Number 3 And Thrust Bearing Number 4 Installation
            • >>B<< One-Way Clutch Installation
      • Low-Reverse Brake
        • Disassembly And Assembly
          • Notes
          • Assembly Service Point
            • >>A<< D-Ring Installation
      • Second Brake
        • Disassembly And Assembly
          • Notes
          • Assembly Service Point
            • >>A<< D-Ring Installation
      • Output Shaft
        • Disassembly And Assembly
          • Notes
          • Disassembly Service Points
            • <<A>> Transfer Driven Gear Removal
            • <<B>> Taper Roller Bearing Removal
          • Assembly Service Points
            • >>A<< Taper Roller Bearing Installation
            • >>B<< Outer Race Installation
            • >>C<< Transfer Driven Gear Installation
      • Differential
        • Disassembly And Assembly
          • Notes
          • Disassembly Service Point
            • <<A>> Taper Roller Bearing Removal
          • Assembly Service Points
            • >>A<< Spacer/Side Gear/Washer/Pinion And Pinion Shaft Installation
            • >>B<< Lock Pin Installation
            • >>C<< Taper Roller Bearing Installation
            • >>D<< Differential Drive Gear Installation
      • Valve Body
        • Disassembly And Assembly
          • Notes
          • Disassembly Service Point
            • <<A>> Solenoid Valves Removal
          • Assembly Service Points
            • >>A<< Spring/Steel Ball/Damping Valve And Damping Valve Spring Installation
            • >>B<< Spring And Steel Ball Installation
            • >>C<< Solenoid Valves Installation
      • Drive Shaft Oil Seal
        • Disassembly And Assembly
          • Notes
          • Assembly Service Points
            • >>A<< Oil Seal Installation
            • >>B<< Oil Seal Installation
      • Specifications
        • Fastener Tightening Specifications
        • General Specifications
        • Service Specifications
        • Valve Body Spring Identification Table
        • Adjusting Plate, Snap Ring And Spacers
        • Sealants
          • Notes
          • Form-In-Place Gasket (FIPG)
          • Disassembly
          • Surface Preparation
          • FIPG Application
• External Pages