How To Read Data List
Required Special Tools:
- MB991958: Scan Tool (M.U.T.-III Sub Assembly)
- MB991824: V. C. I.
- MB991827: M.U.T.-III USB Cable
- MB991910: M.U.T.-III Main Harness A
CAUTION:
To prevent damage to scan tool MB991958, always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool MB991958.
- Connect scan tool MB991958 to the data link connector.
- Turn the ignition switch to the "ON" position.
- Select "System Select" from the start-up screen.
- Select "From 2006 MY" of "Model Year." When the "Vehicle Information" is displayed, check the contents.
- "Select "AUTO CRUISE" from "System List", and press the "OK" button.NOTE: When the "Loading Option Setup" list is displayed, check the applicable item.
- Select the "MITSUBISHI."
- Select the "Data List."NOTE: When the "Data List Reference Table" button is selected, the service data reference table is displayed, and the normal values can be checked.
- Choose an appropriate item.
- Turn the ignition switch to the "LOCK" (OFF) position.
- Disconnect scan tool MB991958.